Spelling suggestions: "subject:"femand site management (DSM)"" "subject:"femand sido management (DSM)""
1 |
Development of a supervisory system for maintaining the performance of remote energy management systems / Johan Nicolaas du PlessisDu Plessis, Johan Nicolaas January 2014 (has links)
Energy services companies (ESCOs) typically implement energy management systems (EMSs) as part of Demand-Side Management (DSM) projects on South African mines. After DSM project completion, the mine becomes responsible for maintaining the performance of the EMS. Due to a lack of experience in using specialised EMSs, mines typically contract ESCOs for EMS maintenance. However, maintaining a large number of EMSs remotely is a resource-intensive task because of time wasted on daily monitoring and travelling to perform on-site maintenance.
For the same reason, remote maintenance technologies have become widely used to maintain cellular devices, vehicles and industrial equipment. Mine EMSs typically control production-critical systems that in turn ensure safe working conditions underground. EMSs execute highly specialised control philosophies to achieve electrical energy management, while ensuring safe and productive system operation. None of the work done on remote maintenance, however, provides an integrated solution to maintain the performance of a growing number of these specialised EMSs.
As part of this study, a supervisory system was developed to optimise remote maintenance of different EMS technologies. The supervisory system builds on the fundamentals of existing remote maintenance technologies, complemented by comprehensive diagnostics of specialised EMS technologies. This is possible through automated diagnostics of EMS components, the control philosophy and overall EMS performance. Maintenance management forms part of the supervisory system to ensure that maintenance is performed with optimal efficiency.
A system implementation was executed to prove the feasibility of the supervisory system. The functional operation of the system was verified with pre-set scenarios that simulated day-to-day operation and common fault diagnostic events. As part of the case studies conducted for this thesis, the supervisory system was integrated with three distinct EMS technologies implemented on South African mines. To support the results of these case studies, the system validation was extended through integrations with seven additional EMSs.
For the first time, a supervisory assessed the condition of the EMS components, the control philosophy and DSM performance comprehensively. The results (obtained over a period of more than six months) indicated that the average operational availability of EMS components improved from 90% to 97%. The average EMS performance improved from 1.8 MW to 2.5 MW, an improvement of 39%. The resulting electricity cost reduction achieved on the case studies accumulated to approximately R6 million during the respective assessment periods.
The supervisory system facilitated efficient EMS maintenance, thus reducing the risk of unsafe working conditions and production interruptions. The system also allowed maintenance personnel to improve the diagnostic process continually, thus aligning with the standards documented in ISO 50001:2011 (ISO, 2011) regarding continual improvement of electrical energy management initiatives.
The new supervisory system is scalable, thus an ESCO can maintain the performance of a growing number of EMSs remotely. Results of this study support further supervisory system integration with compatible EMS technologies, and expansion to new EMS technologies. The modular design of the supervisory system provides a basis for the development of a cross-industry platform for maintaining EMS performance. / PhD (Computer and Electronic Engineering), North-West University, Potchefstroom Campus, 2014
|
2 |
Load management on a municipal water treatment plant / Lötter Adriaan ElsEls, Lötter Adriaan January 2015 (has links)
Water Treatment Plants (WTPs) supply potable water which is transferred by pumps to various end users. WTPs and other sub-systems are energy intensive with pump installed capacities varying between 75 kW – 6 000 kW. It has therefore become important to optimise the utilisation of WTPs. Cost savings can be achieved and the load on the national grid can be reduced. The aim of this study is to develop and implement load management strategies on a municipal WTP.
In this investigation the high lift pumps are deemed to be the largest consumers of electricity. Strategies to safely implement load management on a WTP were researched. By optimising the operations of the pumps, significant cost savings can be achieved. Comparisons between different electricity tariff structures were done. It was found plausible to save R 990 000 annually, on a pumping station with four 1 000 kW pumps installed, when switching to a time-of-use dependent tariff structure.
Strategies to optimise plant utilisation while attempting a load management study include the optimisation of filter washing methods and raw water operations. An increase of 34% in efficiency for a filter backwash cycle was achieved. To accommodate the effects of the load management on the WTP, the operation of valves that allow water to distribute within the plant was also optimised.
The implemented control strategies aimed to accomplish the full utilisation of the WTP and sub-systems to achieve savings. An average evening peak period load shift impact of 2.21 MW was achieved. Due to filter modifications the plant is able to supply 5% more water daily. A conclusion is drawn regarding the success of the strategies implemented. Recommendations are made for further research. / MIng (Mechanical Engineering), North-West University, Potchefstroom Campus, 2015
|
3 |
Development of a supervisory system for maintaining the performance of remote energy management systems / Johan Nicolaas du PlessisDu Plessis, Johan Nicolaas January 2014 (has links)
Energy services companies (ESCOs) typically implement energy management systems (EMSs) as part of Demand-Side Management (DSM) projects on South African mines. After DSM project completion, the mine becomes responsible for maintaining the performance of the EMS. Due to a lack of experience in using specialised EMSs, mines typically contract ESCOs for EMS maintenance. However, maintaining a large number of EMSs remotely is a resource-intensive task because of time wasted on daily monitoring and travelling to perform on-site maintenance.
For the same reason, remote maintenance technologies have become widely used to maintain cellular devices, vehicles and industrial equipment. Mine EMSs typically control production-critical systems that in turn ensure safe working conditions underground. EMSs execute highly specialised control philosophies to achieve electrical energy management, while ensuring safe and productive system operation. None of the work done on remote maintenance, however, provides an integrated solution to maintain the performance of a growing number of these specialised EMSs.
As part of this study, a supervisory system was developed to optimise remote maintenance of different EMS technologies. The supervisory system builds on the fundamentals of existing remote maintenance technologies, complemented by comprehensive diagnostics of specialised EMS technologies. This is possible through automated diagnostics of EMS components, the control philosophy and overall EMS performance. Maintenance management forms part of the supervisory system to ensure that maintenance is performed with optimal efficiency.
A system implementation was executed to prove the feasibility of the supervisory system. The functional operation of the system was verified with pre-set scenarios that simulated day-to-day operation and common fault diagnostic events. As part of the case studies conducted for this thesis, the supervisory system was integrated with three distinct EMS technologies implemented on South African mines. To support the results of these case studies, the system validation was extended through integrations with seven additional EMSs.
For the first time, a supervisory assessed the condition of the EMS components, the control philosophy and DSM performance comprehensively. The results (obtained over a period of more than six months) indicated that the average operational availability of EMS components improved from 90% to 97%. The average EMS performance improved from 1.8 MW to 2.5 MW, an improvement of 39%. The resulting electricity cost reduction achieved on the case studies accumulated to approximately R6 million during the respective assessment periods.
The supervisory system facilitated efficient EMS maintenance, thus reducing the risk of unsafe working conditions and production interruptions. The system also allowed maintenance personnel to improve the diagnostic process continually, thus aligning with the standards documented in ISO 50001:2011 (ISO, 2011) regarding continual improvement of electrical energy management initiatives.
The new supervisory system is scalable, thus an ESCO can maintain the performance of a growing number of EMSs remotely. Results of this study support further supervisory system integration with compatible EMS technologies, and expansion to new EMS technologies. The modular design of the supervisory system provides a basis for the development of a cross-industry platform for maintaining EMS performance. / PhD (Computer and Electronic Engineering), North-West University, Potchefstroom Campus, 2014
|
4 |
Load management on a municipal water treatment plant / Lötter Adriaan ElsEls, Lötter Adriaan January 2015 (has links)
Water Treatment Plants (WTPs) supply potable water which is transferred by pumps to various end users. WTPs and other sub-systems are energy intensive with pump installed capacities varying between 75 kW – 6 000 kW. It has therefore become important to optimise the utilisation of WTPs. Cost savings can be achieved and the load on the national grid can be reduced. The aim of this study is to develop and implement load management strategies on a municipal WTP.
In this investigation the high lift pumps are deemed to be the largest consumers of electricity. Strategies to safely implement load management on a WTP were researched. By optimising the operations of the pumps, significant cost savings can be achieved. Comparisons between different electricity tariff structures were done. It was found plausible to save R 990 000 annually, on a pumping station with four 1 000 kW pumps installed, when switching to a time-of-use dependent tariff structure.
Strategies to optimise plant utilisation while attempting a load management study include the optimisation of filter washing methods and raw water operations. An increase of 34% in efficiency for a filter backwash cycle was achieved. To accommodate the effects of the load management on the WTP, the operation of valves that allow water to distribute within the plant was also optimised.
The implemented control strategies aimed to accomplish the full utilisation of the WTP and sub-systems to achieve savings. An average evening peak period load shift impact of 2.21 MW was achieved. Due to filter modifications the plant is able to supply 5% more water daily. A conclusion is drawn regarding the success of the strategies implemented. Recommendations are made for further research. / MIng (Mechanical Engineering), North-West University, Potchefstroom Campus, 2015
|
5 |
Modernising underground compressed air DSM projects to reduce operating costs / Christiaan Johannes Roux KrielKriel, Christiaan Johannes Roux January 2014 (has links)
Growing demand for electricity forces suppliers to expand their generation capacity.
Financing these expansion programmes results in electricity cost increases above inflation
rates. By reducing electricity consumption, additional supply capacity is created at lower
costs than the building of conventional power stations. Therefore, there is strong justification
to reduce electricity consumption on the supplier and consumer side.
The mining and industrial sectors of South Africa consumed approximately 43% of the total
electricity supplied by Eskom during 2012. Approximately 10% of this electricity was used to
produce compressed air. By reducing the electricity consumption of compressed air systems,
operating costs are reduced. In turn this reduces the strain on the South African electricity
network.
Previous energy saving projects on mine compressed air systems realised savings that were
not always sustainable. Savings deteriorated due to, amongst others, rapid employee turnover,
improper training, lack of maintenance and system changes. There is therefore a need to
improve projects that have already been implemented on mine compressed air systems.
The continuous improvement of equipment (such as improved control valves) and the
availability of newer technologies can be used to improve existing energy saving strategies.
This study provides a solution to reduce the electricity consumption and operating costs of a
deep level mine compressed air system. This was achieved by modernising and improving an
existing underground compressed air saving strategy. This improvement resulted in a power
saving of 1.15 MW; a saving equivalent to an annual cost saving of R4.16 million. It was found that the improved underground compressed air DSM project realised significant additional electrical energy savings. This resulted in ample cost savings to justify the implementation of the project improvements. It is recommended that opportunities to improve existing electrical energy saving projects on surface compressed air systems are investigated. / MIng (Mechanical Engineering), North-West University, Potchefstroom Campus, 2014
|
6 |
Efficient monitoring of mine compressed air savings / by P. Goosen.Goosen, Pieter January 2013 (has links)
In 2011 South Africa's main electricity supplier, Eskom, experienced a peak electricity demand of 89% of their total installed generation capacity. The high utilisation rate makes it difficult to perform essential maintenance on the system. Eskom implements Demand-Side Management (DSM) projects in various industries, in order to reduce the demand and to ensure sustainable electricity supply.
The mining sector consumes 14.5% of the total amount of electricity generated by Eskom. Mine compressed air systems can consume as much as 40% of a mine's total electricity requirements. This makes mine compressed air systems an ideal target for DSM. Electricity load seems to be reduced, but many DSM savings are not sustained throughout the project lifetime.
An existing project feedback method of a specific Energy Services Company (ESCo) includes the manual collection of data from the mines and manual generation of reports. These reports show energy savings of the DSM projects to help the ESCo and their clients to improve and sustain the performance of the projects. A great amount of man-hours is used which results in large time delays in the feedback-loop. In order to address this, the need for a new automatic feedback reporting system was identified.
This study mainly focusses on the development and implementation of a new method to monitor DSM savings on mine compressed air systems. It includes the reliable collection of data from mines, processing and storing of the data in a central database and generating savings reports. This is done automatically on a daily basis. In order to complete the feedback-loop, the reports are verified and emailed to clients and ESCo personnel on a daily basis.
The new reporting system is implemented at a number of mines. Four of these project implementations are used as case studies to measure and interpret the effectiveness and value of this system. It saves a significant amount of man-hours and proves to be of great value in the sustainability of DSM project savings. Both Eskom and mining companies benefit from the efficient monitoring of mine compressed air savings. / Thesis (MIng (Computer and Electronic Engineering))--North-West University, Potchefstroom Campus, 2013.
|
7 |
Modernising underground compressed air DSM projects to reduce operating costs / Christiaan Johannes Roux KrielKriel, Christiaan Johannes Roux January 2014 (has links)
Growing demand for electricity forces suppliers to expand their generation capacity.
Financing these expansion programmes results in electricity cost increases above inflation
rates. By reducing electricity consumption, additional supply capacity is created at lower
costs than the building of conventional power stations. Therefore, there is strong justification
to reduce electricity consumption on the supplier and consumer side.
The mining and industrial sectors of South Africa consumed approximately 43% of the total
electricity supplied by Eskom during 2012. Approximately 10% of this electricity was used to
produce compressed air. By reducing the electricity consumption of compressed air systems,
operating costs are reduced. In turn this reduces the strain on the South African electricity
network.
Previous energy saving projects on mine compressed air systems realised savings that were
not always sustainable. Savings deteriorated due to, amongst others, rapid employee turnover,
improper training, lack of maintenance and system changes. There is therefore a need to
improve projects that have already been implemented on mine compressed air systems.
The continuous improvement of equipment (such as improved control valves) and the
availability of newer technologies can be used to improve existing energy saving strategies.
This study provides a solution to reduce the electricity consumption and operating costs of a
deep level mine compressed air system. This was achieved by modernising and improving an
existing underground compressed air saving strategy. This improvement resulted in a power
saving of 1.15 MW; a saving equivalent to an annual cost saving of R4.16 million. It was found that the improved underground compressed air DSM project realised significant additional electrical energy savings. This resulted in ample cost savings to justify the implementation of the project improvements. It is recommended that opportunities to improve existing electrical energy saving projects on surface compressed air systems are investigated. / MIng (Mechanical Engineering), North-West University, Potchefstroom Campus, 2014
|
8 |
Efficient monitoring of mine compressed air savings / by P. Goosen.Goosen, Pieter January 2013 (has links)
In 2011 South Africa's main electricity supplier, Eskom, experienced a peak electricity demand of 89% of their total installed generation capacity. The high utilisation rate makes it difficult to perform essential maintenance on the system. Eskom implements Demand-Side Management (DSM) projects in various industries, in order to reduce the demand and to ensure sustainable electricity supply.
The mining sector consumes 14.5% of the total amount of electricity generated by Eskom. Mine compressed air systems can consume as much as 40% of a mine's total electricity requirements. This makes mine compressed air systems an ideal target for DSM. Electricity load seems to be reduced, but many DSM savings are not sustained throughout the project lifetime.
An existing project feedback method of a specific Energy Services Company (ESCo) includes the manual collection of data from the mines and manual generation of reports. These reports show energy savings of the DSM projects to help the ESCo and their clients to improve and sustain the performance of the projects. A great amount of man-hours is used which results in large time delays in the feedback-loop. In order to address this, the need for a new automatic feedback reporting system was identified.
This study mainly focusses on the development and implementation of a new method to monitor DSM savings on mine compressed air systems. It includes the reliable collection of data from mines, processing and storing of the data in a central database and generating savings reports. This is done automatically on a daily basis. In order to complete the feedback-loop, the reports are verified and emailed to clients and ESCo personnel on a daily basis.
The new reporting system is implemented at a number of mines. Four of these project implementations are used as case studies to measure and interpret the effectiveness and value of this system. It saves a significant amount of man-hours and proves to be of great value in the sustainability of DSM project savings. Both Eskom and mining companies benefit from the efficient monitoring of mine compressed air savings. / Thesis (MIng (Computer and Electronic Engineering))--North-West University, Potchefstroom Campus, 2013.
|
9 |
Sustainable DSM on deep mine refrigeration systems : a novel approach / J. van der BijlVan der Bijl, Johannes January 2007 (has links)
Thesis (Ph.D. (Mechanical Engineering))--North-West University, Potchefstroom Campus, 2008.
|
10 |
Development of a dynamic centrifugal compressor selector for large compressed air networks in the mining industry / Johan Venter.Venter, Johan January 2012 (has links)
Various commercial software packages are available for simulating compressed air
network operations. However, none of these software packages are able to
dynamically prioritise compressor selection on large compressed air networks in the
mining industry.
In this dissertation, a dynamic compressor selector (DCS) will be developed that will
actively and continuously monitor system demand. The software will ensure that the
most suitable compressors, based on efficiency and position in the compressed air
network, are always in operation. The study will be conducted at a platinum mine.
Compressed air flow and pressure requirements will be maintained without
compromising mine safety procedures. Significant energy savings will be realised.
DCS will receive shaft pressure profiles from each of the shafts’ surface compressed
air control valves. These parameters will be used to calculate and predict the
compressed air demand. All pipe friction losses and leaks will be taken into account
to determine the end-point pressure losses at different flow rates. DCS will then
prioritise the compressors of the compressed air network based on the overall
system requirement.
This software combines the benefits of supply-side and demand-side management.
Potential energy savings with DCS were proven and compressor cycling reduced. A
DCS user-friendly interface was created to easily set up any mine’s compressed air
network. / Thesis (MIng (Mechanical Engineering))--North-West University, Potchefstroom Campus, 2013
|
Page generated in 0.0911 seconds