Spelling suggestions: "subject:"deterioration"" "subject:"eterioration""
201 |
Air-gap transmission lines on printed circuit boards for chip-to-chip interconnectionsSpencer, Todd Joseph 24 May 2010 (has links)
Low-loss off-chip interconnects are required for energy-efficient communication in dense microprocessors. To meet these needs, air cavity parallel plate and microstrip lines with copper conductors were fabricated on an FR-4 epoxy-fiberglass substrate using conventional microelectronics manufacturing techniques. Copper transmission lines were separated by a composite dielectric of air and Avatrel 2000P and by a dielectric layer of air only. The composite dielectric lines were characterized to 10 GHz while the all air dielectric lines were characterized to 40 GHz. The transmission line structures showed loss as low 1.5 dB/cm at 40 GHz with an effective dielectric constant below 1.4. These novel structures show low loss in the dielectric due to the reduced relative permittivity and loss tangent introduced by the air cavity.
Transmission line structures with a composite dielectric were built by coating the sacrificial polymer poly(propylene carbonate) (PPC) over a copper signal line, encapsulating with an overcoat polymer, electroplating a ground line, and decomposing PPC to form an air cavity. The signal and ground wires were separated by a layer of 15 µm of air and 20 µm of Avatrel 2000P. Air cavity formation reduced dielectric constant more than 30 percent and loss of less than 0.5 dB/cm was measured at 10 GHz.
Residue from PPC decomposition was observed in the cavity of composite dielectric structures and the decomposition characteristics of PPC were evaluated to characterize the residue and understand its formation. Analysis of PPC decomposition based on molecular weight, molecular backbone structure, photoacid concentration and vapor pressure, casting solvent, and decomposition environment was performed using thermogravimetric analysis and extracting kinetic parameters.
Novel interaction of copper and PPC was observed and characterized for the self-patterning of PPC on copper. Copper is dissolved from the surface during PPC spincoating and interacts with the polymer chains to improve stability. The improved thermal stability allows selective patterning of PPC on copper. Decomposition characteristics, residual metals analysis, and diffusion profile were analyzed. The unique interaction could simplify air-gap processing for transmission lines.
Inorganic-organic hybrid polymers were characterized for use as overcoat materials. Curing characteristics of the monomers and mechanical properties of the polymer films were analyzed and compared with commercially available overcoat materials. The modulus and hardness of these polymers was too low for use as an air-gap overcoat, but may be valuable as a barrier layer for some applications.
The knowledge gained from building transmission line structures with a composite dielectric, analyzing PPC decomposition, interaction with copper, and comparison of hybrid polymers with commercial overcoats was used to build air-gap structures with improved electrical design. The ground metal was separated from the signal only by air. The signal wire was supported from above using 60 µm of Avatrel 8000P as an overcoat. Structures showed loss of less than 1.5 dB/cm at 40 GHz, the lowest reported value for a fully encapsulated transmission line structure.
|
202 |
Environmental life cycle driven decision making in product designLu, Di 02 June 2010 (has links)
There is growing interest in the assessment of products from a life cycle perspective. Product life cycles are often dominated by extensive chemical supply chains that lead up to the materials contained in the products and the overwhelming contribution that the production of these chemicals make to the overall life cycle due to their energy intensity. Hence, chemical engineers are uniquely positioned to carry out significant components of this assessment because of their skills in chemical process design and analysis. Furthermore, the complexity and extent of life cycle concerns creates opportunities for new process systems tools to be developed to support product design and analysis.
The specific thesis objectives are threefold. The first is to develop a systematic methodology to optimize material selections for a product based on life cycle inventory (LCI) characteristics. The second is to use this methodology combined with sustainability assessment standards to assess whether these standards are congruent with life cycle assessment. The third is to develop an approach to design product sustainability assessment standards that are clear and consistent with life cycle principles. The overall contributions will be in the applied domain of life cycle assessment and its integration into standards setting, and in contributions to optimization tools and methods.
The three objectives will be illustrated in the domain of carpet systems. Previous research has generated a substantial database of gate-to-gate (GTG) life cycle inventories for various chemicals that make up carpet, extending from the inputs to the final carpet mill back to the natural resources such as oil, natural gas and mined calcium carbonate. Carpet recycling is a promising alternative approach for reducing life cycle impacts and is being practiced at a growing scale in the U.S. This thesis uses the specific individual LCI gate-to-gate blocks for virgin materials and for important carpet recycling and general polymer recycling processes. A database for the GTG LCI will be used to construct a virtual chemical tree that automatically that represents the potential cradle-to-gate (CTG) use of resources. The alternatives for each possible route for the product will be generated, and optimization approaches will be applied to optimize the performance of the carpet system according to life cycle objectives.
Sustainability assessment standards are currently being developed for a range of building products, such as carpet, resilient flooring, commercial textile coverings and office furniture. This activity has been stimulated through the considerable success of the U.S. Green Building Council's (USGBC) LEED standard. The LEED Standard is points-based: the building design and construction earns points for having certain attributes or promoting certain activities. The points are totaled and then the building earns a rating based on the total being above a certain threshold. The second thesis objective is met through extending the LCI optimization methodology to represent point-based standards. A product can then be optimized to maximize the number of points it earns or to minimize its life cycle attributes. This approach can be used to evaluate the effectiveness of an emerging carpet sustainability standard, NSF-140, in integrating LCI into the standard.
The last objective, standard design, is approached through designing the tables that award points in the standard to be consistent with life cycle information. Certain minimum principles of consistency are articulated and then the designs shown to be consistent with these principles in the case that the life cycle impact assessment method maps the life cycle inventory to impact through a linear weighting.
|
203 |
Rehabilitation of Precast Deck Panel BridgesAlvi, Atiq H. 26 October 2010 (has links)
USF completed a research study in 2005, which prioritized the replacement of 85 deteriorating composite precast deck panel bridges. This thesis re-evaluates the original recommendations in the wake of failures of two of these bridges in 2007. Since funding will not allow all identified bridges to be replaced, it was necessary to determine the most effective repair methods. To assess USF’s recommendations, a forensic study was undertaken in which the most current inspection and work program documents on the two failed bridges were reviewed and FDOT personnel interviewed. The best repair procedures were determined by reviewing repair plans, specifications, reports and site visits. The study found the two bridges that failed had been correctly prioritized by USF (No. 1 of 18 and No. 8 of 15). A new, accelerated repair method encompassing complete bay replacement was developed in a pilot project funded by the Florida Department of Transportation.
|
204 |
Structural assessment of bridge piers with damage similar to alkali silica reaction and/or delayed ettringite formationKapitan, Jacob G., 1982- 20 July 2015 (has links)
In recent years, it has been discovered that some structural elements of the I-10 and I-35 corridor passing through San Antonio, Texas (San Antonio Y) are suffering from premature concrete deterioration related to alkali-silica reaction (ASR) and/or delayed ettringite formation (DEF). While there is considerable evidence of materials related distress, the degree of damage to structural capacity has not been quantified. In a comprehensive search of literature, very little research has been identified that quantifies the amount of structural damage caused by ASR and/or DEF on the load carrying capacity of structural piers. Due to the fact that this integral stretch of interstate highway sees a large volume of traffic, it is desirable to determine a method of assessing the degree of structural damage, and the necessity of taking remedial actions. The purpose of this thesis is to develop an assessment methodology which can be used by The Texas Department of Transportation (TxDOT) to evaluate the current and future integrity of structural elements in the San Antonio Y. The key steps included in the methodology are conducting a literature review on the effects of ASR and/or DEF on the structural properties of reinforced concrete, evaluating in-situ engineering properties of existing concrete, investigating the basis for the original design, and performing an experimental investigation to determine the effect of cracking on the load carrying capacity of typical SAY piers. This thesis presents the findings from this research. / text
|
205 |
Analysis and modeling of the long-term performance of amorphous photovoltaic arrays.Choi, Hong Kyu. January 1989 (has links)
A validated predictive model of a-Si:H solar cell arrays was developed. The performance of a-Si:H solar cells was modeled by predicting the performance before degradation first, and then modifying it with terms that account for degradation and recovery effects. A unique approach for the determination of the fundamental rate controlling parameters for the degradation and recovery process was carried out by observing the variation of the short-circuit current. The experimental annealing of a-Si:H silicon samples showed that the percent recovery from the degraded state to the as-grown state by annealing was virtually independent of the initial state at the start of the annealing process. This allowed the recovery parameters to be determined independently of the prior degradation process. An extremely simple and fast running algorithm for the long-term performance was developed in terms of the incident solar radiation, the panel temperature, and the total radiation exposed. Also it was found that the entire process of the Staebler-Wronski effect could be adequately represented by a correlation in which the degradation and recovery processes are solely a function of the total radiation exposure of the panel at ambient conditions.
|
206 |
Stone deterioration and replacement of natural building stones at the Cologne cathedral - A contribution to the preservation of cultural heritageGraue, Birte Johanna 27 March 2013 (has links)
Die vorliegende Arbeit beschäftigt sich mit der Verwitterung von Naturwerkstein als Funktion von mineralogischen und petrophysikalischen Eigenschaften unter unterschiedlichen umwelt- und bauphysikalischen Bedingungen. Am Beispiel des Kölner Doms wird zum einen die große Anzahl an unterschiedlichen Baumaterialien, die in diesem Bauwerk angetroffen werden, vorgestellt. Darüber hinaus werden auch die daraus resultierenden Probleme von Interferenzen der verschiedenen Materialien untereinander in Hinblick auf ihre Verwitterung beleuchtet. Physikalische und chemische Verwitterungsprozesse werden anhand von Laborversuchen und Tests empirisch erfasst. Diese werden mit den festgestellten spezifischen petrophysikalischen Eigenschaften der unterschiedlichen Gesteine korreliert und im Zusammenhang mit den in situ festgestellten Verwitterungsphänomenen und –prozessen diskutiert. Um die unterschiedlichen Einflüsse der Verwitterungs- und Umweltbelastungen zu evaluieren, wird die Natursteinverwitterung an drei Standorten – dem industriell geprägten Köln, Xanten mit einem städtischen Klima und im ländlichen Altenberg im Bergischen Land – vergleichend studiert. Hierbei zeigt sich der starke Einfluss der Luftverschmutzung auf die Natursteinverwitterung nicht nur für karbonatische sondern auch für silikatische Gesteine. Beispielhaft werden am Drachenfels Trachyt die Mineralkomposition, die Gefügeeigenschaften und die petrophysikalischen Eigenschaften des Gesteins im Gesamtzusammenhang miteinander korreliert und mit den festgestellten Schadensphänomenen und den ermittelten physikalischen und chemischen Verwitterungsprozessen abgeglichen. Aus diesen Erkenntnissen heraus wird ein Modell zur Verwitterung dieses Naturwerksteins entwickelt. In Hinblick auf Natursteinersatz als Erhaltungsmaßnahme für historische Kulturgüter aus Stein werden die Untersuchungsergebnisse, die Erkenntnisse aus den Laborversuchen und den Diskussionen zusammengeführt und bestehende grundsätzliche Anforderungen an ein Ersatzgestein weiter differenziert. Die verschiedenen Wechselwirkungsmechanismen der unterschiedlichen Naturwerksteine, die in einem Bauwerk verbaut sind, werden vor dem Hintergrund ihrer petrophysikalischen Charakteristika sowie ihres Verwitterungsverhaltens bewertet. Basierend auf dieser Beurteilung wird eine Auswahl-Systematik entwickelt, die die Evaluierung der Verträglichkeit von historischen und modernen Austauschgesteinen für historische Bauwerke unterstützt.
Aufgrund seiner langen über 600 Jahre währenden Baugeschichte ist der Kölner Dom aus über 50 verschiedenen Bausteinen errichtet. Die vorliegende Arbeit bezieht sich dabei auf acht Haupt-Bausteine. Die untersuchten „Dom-Bausteine“ sind der Drachenfels Trachyt, der Stenzelberg Latit, der Obernkirchener und der Schlaitdorfer Sandstein, der Krensheimer Muschelkalk, die Londorfer Basaltlava sowie der Montemerlo Trachyt und der Bozanov Sandstein. Eine Verwendung ähnlicher Naturwerksteine ist auch beim Xantener und beim Altenberger Dom festzustellen, die ebenfalls aus dem 13. Jahrhundert stammen. Für diese drei mittelalterlichen Bauwerke wurden nicht nur zu ihrer Entstehungszeit sondern auch in späteren Restaurierungs- und Wiederinstandsetzungsmaßnahmen ähnliche Bausteine verwendet. Kapitel 2 der vorliegenden Arbeit stellt die drei Kathedralen in ihrem bauhistorischen Kontext vor und zeigt die Verwendung der unterschiedlichen Naturwerksteine auf. Es erwies sich schon zu ihrer Erbauungszeit und auch zu Zeiten des Weiterbaus, dass die Frage nach einem adäquaten Ersatzgestein entscheidend war, seit der ursprünglich verwendete Drachenfels Trachyt ab dem 19. Jahrhundert für Weiterbau- und Instandsetzungsmaßnahmen nicht mehr zur Verfügung stand.
Die Umweltbedingungen an den drei Standorten unterscheiden sich sehr stark: Der Kölner Dom ist in einem industriell geprägten Raum zu finden, das städtische Klima von Xanten zeigt geringe industrielle Prägung, während Altenberg in einer ländlichen waldreichen Gegend liegt. Diese drei unterschiedlichen Umweltbedingungen der Kathedralen werden in Kapitel 3 beleuchtet. Darüber hinaus, werden mikroklimatische Feuchtigkeits- und Temperatur-Messungen und die entsprechenden Verteilungen in verschiedenen Bausteinen des Kölner Doms vorgestellt. Sensoren wurden in situ platziert in unterschiedlichen Tiefen innerhalb der jeweiligen Bauwerksteine und in unterschiedlich exponierten Bereichen des Bauwerks. Diese Messungen sollen dazu beitragen, die Wechselwirkungen von Feuchtigkeits- und Temperatur-Verteilung in den Bauwerksgesteinen mit den festgestellten Schäden und untersuchten Verwitterungsprozessen zu korrelieren.
Die Naturwerksteine an den drei Bauwerken in den unterschiedlichen Umweltbedingungen zeigen ähnliche Verwitterungsmuster. Am Kölner Dom ist eine sehr starke Naturstein-Verwitterung festzustellen, die die statische Sicherheit von Gebäudeteilen mitunter gefährdet. Der Drachenfels Trachyt zeigt ausgeprägte Verwitterungsmerkmale, wie Schalen- und Schuppenbildung, strukturelle Entfestigung und Bröckelzerfall bis hin zum Totalverlust. Auch die anderen Bauwerksgesteine wie Sand- und Kalksteine sowie vulkanische Gesteine zeigen signifikante Verwitterung. Die unterschiedlichen Verwitterungsphänomene sind in Kapitel 4 dargestellt. Am Xantener und Altenberger Dom wurden ähnliche Verwitterungsmerkmale festgestellt, allerdings in viel geringerem Umfang und geringerer Intensität. Die Prozesse, die die Verwitterung begründen, sind vergleichbar. Diese werden von der mineralogischen Zusammensetzung und den Gefügeeigenschaften der jeweiligen Steine bestimmt, die wiederum die petrophysikalischen Eigenschaften beeinflussen. Dadurch wird deutlich, dass die unterschiedliche Intensitätsausprägung an den drei Bauwerken in den unterschiedlichen umweltklimatischen Bedingungen begründet liegt.
Die Eigenschaften und gesteinsspezifischen Charakteristika der acht untersuchten „Dom-Bausteine“ sind festgestellt worden. In Kapitel 5 werden ihre petrographischen und petrophysikalischen Eigenschaften sowie ihr Feuchte- und Temperaturverhalten als auch ihre Festigkeitsparameter bestimmt. Diese Eigenschaften werden miteinander korreliert in Hinblick auf ihren wechselwirkenden Einfluss und ihre Abhängigkeiten untereinander und sie werden in Hinblick auf ihren Einfluss auf die typischen Verwitterungsphänomene der einzelnen Steine diskutiert.
Kapitel 6 beschreibt Experimente und Tests zur physikalischen Verwitterung von Naturwerksteinen. Das Trocknungsverhalten der acht „Dom-Bausteine“ sowie ihr Verhalten bei zyklischer Frost-Tau-Belastung und Salzbelastung werden diskutiert. Die Test-Ergebnisse werden mit den gesteinsspezifischen Eigenschaften korreliert und mit dem in situ beobachteten Verfall verglichen.
Die Ergebnisse von verschiedenen chemischen Experimenten werden in Kapitel 7 diskutiert und sollen zum Verständnis von chemischen Verwitterungsreaktionen der unterschiedlichen Steine beitragen. Neben einer generellen Beurteilung ihrer Säureresistenz soll ihr Lösungsverhalten in unterschiedlichen Lösungen untersucht werden. Mögliche chemische Verwitterungsreaktionen werden diskutiert, um das Verhalten der Naturwerksteine in unterschiedlichen Umweltbedingungen zu beleuchten
Nachdem die einzelnen extrinsischen Faktoren (u.a. Klima- und Umweltbedingungen) sowie die intrinsischen Faktoren der einzelnen Steine (petrophysikalische Eigenschaften und Mineralkomposition sowie Gefügeeigenschaften, etc.) erfasst und ihr physikalisches und chemisches Verwitterungsverhalten in Tests empirisch festgestellt wurde, werden in einem nächsten Schritt diese verschiedenen, sehr komplexen wechselwirkenden Verwitterungsreaktionen und –prozesse physikalischer und chemischer Art in situ untersucht. Kapitel 8 stellt die Untersuchungen an den verschiedenen Bauwerksteinen der drei unterschiedlichen Standorte des Kölner, Xantener und Altenberger Doms vor. Die Bildung schwarzer Verwitterungskrusten als Hauptindikator für die Natursteinverwitterung im Zusammenhang mit Luftverschmutzung variiert sehr stark in diesen drei unterschiedlichen – industriell geprägten, städtischen und ländlichen – Klimata. Darüber hinaus wird gezeigt, dass sich nicht nur auf Karbonatgesteinen schwarze Verwitterungskrusten bilden, sondern auch auf silikatischen Naturwerksteinen. Die Krustenbildung auf dem Drachenfels Trachyt ist hauptsächlich durch extrinsische Faktoren bestimmt, dabei können benachbarte Gesteine zu dieser Krustenbildung mit beitragen. Für den Drachenfels Trachyt wird ein Verwitterungsmodell entwickelt, das die Wechselwirkung der verschiedenen Rückkopplungsmechanismen physikalischer und chemischer Verwitterungsprozesse als Funktion intrinsischer und extrinsischer Faktoren darstellt.
Im abschließenden Kapitel wird die anfangs gestellte Frage nach einem adäquaten Ersatzgestein aufgegriffen. Vor dem Hintergrund der unterschiedlichen durchgeführten Untersuchungen und daraus gewonnenen Erkenntnisse werden mögliche Wechselwirkungen der unterschiedlichen miteinander verbauten Werksteine beleuchtet. Grundsätzliche Anforderungen an Ersatzgesteine umfassen mineralogische, optische und petrophysikalische Eigenschaften. Die starke Divergenz der festgestellten Steinparameter der verschiedenen untersuchten Gesteine (Mineralkomposition, Porosität, Wasseraufnahme und –sättigung, Trocknungsverhalten, Feuchte- und Temperaturdehnung, Festigkeitsparameter, etc.) zeigt, dass es anhand dieses Anforderungskataloges fast unmöglich ist, ein ideales Ersatzgestein zu finden, falls die Parameter nicht differenzierter betrachtet werden. Dazu wird die Summe der Eigenschaften und Charakteristika in Hinblick auf ihre Signifikanz für die Materialeigenschaften und das Materialverhalten auf der einen Seite sowie für die Ausprägung von Schadensphänomenen und ihr Verwitterungsverhalten auf der anderen Seite miteinander korreliert und bewertet. Anhand einer entsprechenden Punktevergabe werden ein „Material-interner Index“ und ein „Verwitterungs-Index“ erstellt. Aus diesen beiden Bewertungs-Skalen ergeben sich die „Schlüssel-Parameter“ des Originalgesteins, die bei einem Kompatibilitätsabgleich mit einem potenziellen Austauschgestein im Rahmen des genannten Anforderungskataloges übereinstimmen sollten. Diese systematische Herangehensweise der Evaluierung führt zu einer Entwicklung von allgemeinen Qualitätskriterien für die Kompatibilität zur Auswahl geeigneter Ersatzgesteine für historische Bauwerke, in denen mehr als ein Naturwerkstein verbaut ist. Sie trägt zur Beurteilung der Verträglichkeit von historischen und modernen Austauschmaterialien in einem Bauwerk bei.
Die neu gewonnenen Erkenntnisse sollen also einen Beitrag leisten bei der Aufstellung von Sanierungs- und Konservierungskonzepten, im Besonderen bei der Evaluierung von Materialkompatibilitäten und der entsprechenden Auswahl von Ersatzgestein, und damit die Entwicklung und Umsetzung von qualitativ hochwertigen Erhaltungsstrategien für Baudenkmäler aus Naturwerkstein unterstützen.
|
207 |
Interregional ecology - resource flows and sustainability in a globalizing worldKissinger, Meidad 11 1900 (has links)
In a globalizing world, trade has become essential to supporting the needs and wants of billions of people. Virtually everyone now consumes resource commodities and manufactured products traded all over the world; the ecological footprints of nations are now scattered across the globe.
The spatial separation of material production (resource exploitation) from consumption eliminates negative feedbacks from supporting eco-systems. Most consumers remain unaware of the impacts that their trade dependence imposes on distant ecosystems (out of sight out of mind).
I take the first steps in developing a conceptual and practical framework for an ‘interregional ecology’ approach to exploring and analyzing sustainability in an increasingly interconnected world.
Such an approach accounts for some of the ‘externalities’ of globalization and international trade. It underscores the increasing dependence and impact of almost any country on resources originating from others and recognizes that the sustainability of any specified region may be increasingly linked to the ecological sustainability of distant supporting regions.
I empirically describe and quantify some of the interregional material linkages between selected countries. I document the flows of renewable resources into the U.S. and quantify the U.S. external material footprint (EF) on specific countries. I then document the physical inputs involved in production of most agricultural export products from Costa Rica and Canada. Finally, I focus on major export products such as bananas, coffee and beef in Costa Rica and agricultural activities in
the Canadian Prairies and document some of the ecological consequences (loss of habitat, soil degradation, water contamination and biodiversity loss) of that production. My research findings
show increasing U.S. imports, increasing reliance on external sources and growing external ecological footprints. They also show how production activities mostly for overseas consumption led to changes in ecological structure and function in the studied export countries.
This dissertation adds a missing trans-national dimension to the sustainability debate effectively integrating the policy and planning domain for sustainability in one region with that in others.
While my research focuses mainly on documenting the nature and magnitude of interregional connections I also consider some of the implications of the interregional approach for sustainability planning.
|
208 |
Dangų degradacijos modeliai ir jų taikymas Lietuvos automobilių keliams / Models Of Pavement Deterioration And Their Adaptation To Lithuanian Automobile RoadsBraga, Aivaras 27 September 2005 (has links)
Planning road maintenance and development activities, prioritizing road construction, reconstruction and rehabilitation works, performing project economic evaluations, forecasting road operation expenditures and road user effect always requires prediction of pavement behaviour. For this purpose models of pavement deterioration are used. Commonly they are integrated in more sophisticated computational systems, known as Pavement Management systems (PMS) and Highway Development and Management systems (HDM). The implementation of these systems started in Lithuania shortly after the Re-establishment of the Independence. This was triggered by the violent drop in financing of the road sector, forcing to change obsolete road management strategy and planning approach. The need for project economic evaluations, transport modelling and long term pavement performance forecasts grew up after Lithuania joined the European Union and this brought the opportunity for financing road infrastructure projects from the EU funds. At present only on the Lithuanian state road network the total value of implemented projects, justified by evaluations and modelling with PMS, amounts to about 500 million Litas annually. Any Pavement Management System is just as good as the models within it, used for pavement deterioration prediction. The performed test calculations show that prediction models, currently used for this purpose in PMS we have in Lithuania, are of doubtful accuracy and have to be improved.
|
209 |
Staff Nurses' Perceptions of Rapid Response Teams in Acute Care HospitalsJohal, Jagdeep K. 27 September 2008 (has links)
The purpose of the present study were to (a) explore the relationship between the frequency of use of Rapid Response Teams (RRTs) by hospital staff nurses and the support received from RRTs; (b) to investigate staff nurses’ perceptions of their individual level, group level and organizational level learning as a result of single or multiple exposures to the RRT; (c) to identify predictors of learning outcomes and (d) to identify overall impressions and advantages and disadvantages of the RRT. A mail survey was used to collect data. The response responses rate was 33%, 131 registered nurses responded to the survey (pre-test = 12, study = 119). The results of Pearson r correlation suggest that a high frequency of access of RRTs was positively related to process support (r = .25, p < .01). Also, perceived content and process support from RRTs was positively related to maintenance and building of staff nurses’ mental models regarding patient deterioration pertaining to self, group and organization. Multiple regression analyses show that sociodemographic and independent variables predict organizational learning outcomes (mental model maintenance and building). Overall impressions of the RRTs were high. A content analysis of nurses’ comments indicated that there were more advantages to having the RRTs than disadvantages. This study suggests that RRTs are influential in changing nurses’ perceptions about managing patient deterioration. Training programs for RRTs should include both content and process support, which may enhance building and maintaining mental models. / Thesis (Master, Nursing) -- Queen's University, 2008-09-25 21:27:44.682
|
210 |
Biochemical and ultrastructural changes associated with chilling injury in soybean seeds during imbibition.Roskruge, Carol Lynette. January 1996 (has links)
Biochemical and ultrastructural changes associated with chilling injury (CI) in
soybean seeds imbibed at 5°C and 25°C were investigated. Soybean seed
germination appeared to be affected by chilling temperatures and initial seed
moisture content. Seeds with higher moisture contents exhibited 85% germination,
while low moisture content seeds had a 32% germination.
Leakage rates were greater in chilled seeds, indicating that membrane integrity in
the tissues was impaired at chilling. The low rates of potassium ion leakage between
6 and 24 hours of imbibition compared to the high peroxide levels observed during
this period led to the suggestion that lipid peroxidation was a better marker of CI
than leakage.
Transient changes in lipid hydroperoxide levels were observed in chilled and non-chilled
seeds and axes. However, in axes, the increase in lipid hydroperoxides after
12 hours of imbibition at chilling temperatures was associated with an 18% decline
in linoleic acid levels of total lipid fraction. Similarly, a 10% decline was observed in
the polar lipid fraction. These results suggest that the capacity of seeds to control
lipid peroxidation may be an important component in CI and that a consequence of
peroxidation is likely to be a loss of fatty acid unsaturation.
Sugar levels were not affected by chilling and non-chilling temperatures and no
relationship could be established with CI.
Antioxidant defense enzymes (catalase and superoxide dismutase) were expressed
at chilling and non-chilling temperatures and increases were observed after 24 hours of imbibition which showed an apparent correlation with increases to lipid
hydroperoxide levels. Enzyme levels decreased after 48 hours of imbibition at a time
which coincided with the decline observed in the peroxide levels. Overall, no
marked differences were observed in chilled and non-chilled cells at the
ultrastructural level, except that vacuolar reserve mobilization was markedly
impeded. / Thesis (M.Sc.)-University of Natal, Pietermaritzburg, 1996.
|
Page generated in 0.1255 seconds