CeiKNSBN is a new photorefractive material in the KNSBN family, which has some advantages compared to other crystals. Based on two-wave mixing theory, different methods are used to investigate the photorefractvie properties of the Ce:KNSBN crystal. Most parameters of the CeiKNSBN crystal are in the same orders with those of Cu:KNSBN crystal. The diffraction efficiency from the CeiKNSBN crystal is affected by the applied electric field. The applied field increases the response rate of the grating formation and enhances the diffraction efficiency. There exists an optimum applied field and grating spacing related to the maximum diffraction efficiency, and the history of applied field influences the value of diffraction efficiency. Fanning loss and thermal effects should be considered in the diffraction theory for the CeiKNSBN crystal. The phase conjugate properties of the CeiKNSBN crystal are demonstrated in the four-wave mixing configuration and in the SPPC CAT conjugator. The experimental results agree with the analytical solution under some conditions. The He-Ne laser generates higher SPPC in the CeiKNSBN crystal than that by the argon-ion laser. The Doppler frequency detuning technique is first, to our knowledge, applied in the SPPC CAT configuration. The SPPC reflectivity is enhanced and the uniformity of the reflectivity is improved by this technique.

No description available.

Le développement de systèmes IRM à plus haut champ magnétique statique s'est accompagné d'une interrogation légitime concernant l'effet des champs électromagnétiques RF sur les patients. L'effet peut être renforcé par l'introduction d'éléments conducteurs à l'intérieur de la bobine RF comme c'est le cas pour les capteurs endoluminaux utilisés pour l'analyse des parois digestives. Ces capteurs entraînent des risques d'échauffements locaux élevés pour le patient en raison du TAS local induit par le champ électrique RF en présence d'un fil conducteur. Ces capteurs ayant le potentiel de présenter un bénéfice pour le patient, il est nécessaire de s'affranchir de ces limitations. Le premier objectif de la thèse est le développement d'un capteur endoluminal à liaisons optiques. Un dispositif de découplage actif optique a été développé et caractérisé. Les images RMN in vitro montrent une distribution du RSB comparable au découplage classique, validant ainsi l'efficacité du découplage optique. Concernant la transmission optique du signal RMN, des travaux ont été réalisés afin de s'affranchir des contraintes liées à l'utilisation d'un guide d'onde pour la conversion électro-optique par effet Pockels. Le capteur a été rendu plus compact. En revanche, l'importance de contrôler le TAS local dans des conditions expérimentales données demeure un besoin ne s'arrêtant pas à ceux des capteurs endoluminaux. Le second objectif est donc la validation expérimentale d'une sonde électro-optique pour la mesure du champ électrique RF durant un examen IRM. Cette sonde a permis d'effectuer des mesures du champ électrique dans l'air et dans différents milieux biologiques à 3 T et 4,7 T et estimer le TAS local / The recent advancement in MRI systems and the increase of the static magnetic field strength were accompanied by a strong concern about the effect of RF electromagnetic fields on patients. The effect can be increased by the use of conductive elements inside the volume coil as in the case of endoluminal coils used to analyze digestive walls. These coils lead to an increase of the local SAR which is induced by RF electric field in the presence of the coaxial cable connecting the coil to the MR system, resulting in strong local heating. Giving that these coils have the potential to present a real benefit to the patient, it worth to overcome these limitations. Accordingly, the first objective of the thesis is the development of a fully optical endoluminal receiver coil. An optical active detuning system has been developed and characterized. The NMR images show a signal-to-noise ratio distribution similar to that obtained with conventional detuning techniques, thus validating the efficiency of the optical detuning. Concerning the electro-optical conversion and the optical transmission of the NMR signal, experiments were performed to overcome constraints related to the use of waveguide for electro-optical conversion by Pockels effect. Moreover, the importance of monitoring global and local SAR during MRI exams remains a need which is not limited only to the endoluminal coils. The second objective of the thesis is then the experimental validation of an electro-optical probe for real-time measurements of RF electric field. This probe can measure the RF electric field in air and in biological media at 3 T and 4.7 T MRI systems and allows the estimation of the local SAR

No description available.

Les roues aubagées sont des composants dont le comportement dynamique est très sensible au désaccordage involontaire causé par les tolérances de fabrication qui rendent les aubes légèrement différentes les unes des autres. Cette sensibilité se traduit généralement par une amplification des vibrations. L’objectif de ce travail de recherche est de proposer de nouvelles méthodologies permettant d’optimiser la conception en vibration des roues aubagées vis à vis du désaccordage involontaire. L’optimisation est faite pour la réponse forcée et sous une contrainte de marge à la stabilité aéroélastique. Dans ce contexte, le désaccordage intentionnel par modification géométrique des aubes est utilisé. Pour réduire les temps de calcul, une nouvelle méthode de réduction de modèles de roues aubagées désaccordées intentionnellement par modification géométrique est développée et validée. La modélisation des incertitudes incluant le désaccordage involontaire, est faite avec une approche probabiliste non paramétrique. Une application à l’optimisation de la conception en vibration d’une roue réelle a finalement été effectuée en deux phases : (1) une optimisation de la répartition des différentes aubes désaccordées intentionnellement sur la roue aubagée et (2) une optimisation du niveau de modification géométrique de ces aubes. Les résultats montrent qu’une conception robuste par désaccordage intentionnel de la roue aubagée a été effectuée / Bladed disks are components which dynamic behaviour are very sensitive to mistuning induced by the manufacturing process which makes blades differ from one another. This sensitivity increases in general the vibrations. The objective of this research is to propose new methods for optimizing design in vibration of bladed disks with respect to mistuning. Optimization is done for the forced response while keeping a sufficient aeroelastic stability margin. In this context, detuning by modifying geometrically the blades’ shapes is used. To reduce numerical computational costs, a new reduction method for geometrically detuned bladed disks is developed and validate. Uncertainties modeling including mistuning is done with a non-parametric probabilistic approach. An application by optimizing the design in vibration of a realistic bladed disk is finally done in two steps : (1) An optimization of the different detuned blades arrangements around the disk and (2) an optimization of the geometric modification level of blades. The results show that a robust design of the bladed disks has been done using geometric detuning

La décroissance de la consommation électrique des dispositifs électroniques leur a permis une croissance sans précédent. Néanmoins, les éléments de stockage d’énergie (piles et batteries), bien qu’ayant initialement promus ce développement, sont devenus un frein à la prolifération des microsystèmes électroniques, de part leur durée de vie limitée ainsi que des considérations environnementales (recyclage). Pour palier à ce problème, la possibilité d’exploiter l’énergie de l’environnement immédiat du dispositif a été proposée et a fait l’objet de nombreuses recherches au cours des dernières années. En particulier, la récupération d’énergie mécanique exploitant l’effet piézoélectrique est l’une des pistes les plus étudiées actuellement pour la conception de microgénérateurs autonomes capables d’alimenter les dispositifs électroniques. Par ailleurs, dans ce domaine, il a été démontré qu’un traitement non-linéaire de la tension de sortie de l’élément actif permet d’améliorer les capacités de récupération de l’énergie vibratoire. L’une de ces approches, nommée «Synchronized Switch Harvesting on Inductor» (récupération par commutation synchronisée sur inductance) et consistant en une inversion de la tension de manière synchrone avec le déplacement, s’est montrée particulièrement efficace, pouvant augmenter la quantité d’énergie récupérée par un facteur supérieur à 10. Cette dernière conduit à un processus cumulatif qui augmente artificiellement la tension de sortie de l’élément piézoélectrique ainsi qu’à une réduction du déphasage entre tension et vitesse de déplacement ; ces deux effets conduisant à l’augmentation importante des capacités de conversion. Néanmoins, l’étude des microgénérateurs d’énergie s’est quasiment toujours faite en considérant une excitation sinusoïdale, ce qui correspond rarement à la réalité. Peu de travaux expérimentaux, et encore moins théoriques, ont été menés en considérant une excitation large bande ; ceci étant d’autant plus vrai pour les dispositifs incluant un élément non-linéaire. Ainsi l’objectif de cette thèse est d’étudier le comportement des récupérateurs d’énergie piézoélectriques interfacés de manière non-linéaire. Pour ce faire, différentes approches seront envisagées, en considérant le processus de commutation comme un « auto-échantillonnage » du signal, ou en appliquant des théories d’analyse stochastique pour quantifier les performances du dispositif. Ainsi, plusieurs formes d’excitation appliquée au système pourront être analysées, permettant d’étudier la réponse du système sous des conditions plus réalistes. Toujours dans l’optique d’une implémentation réaliste, un autre objectif de cette thèse consistera à évaluer l’impact de la récupération d’énergie par couplage sismique sur la structure hôte, démontrant la nécessité d’envisager le système dans sa globalité afin de disposer de systèmes performants capables de convertir efficacement l’énergie vibratoire sous forme électrique pour un usage ultérieur. / A nonlinear interface consisting in a switching device has been proved to improve the piezoelectric harvester performance. Although existing works are usually done under single frequency excitation. practical cases are more likely broadband and random. In addition, the coupling effect due to the harvesting process is also an interesting issue to discuss. In terms of energy conversion process in seismic piezoelectric harvesters, mechanical interactions between host structure and harvester is an essential issue as well. The purpose of this work is to analysis seismic type piezoelectric harvesters from a practical perspective and to provide an optimal design of the latter. The broadband modeling based on the concepts of self-sampling and self-aliasing is described under broadband excitations for the nonlinear interface called "Periodic Switching Harvesting on Inductor" (PSHI). For this technique, the switching device is considered to be turned on at a fixed switching frequency. Then stochastic modeling is applied to have mathematical expressions that can describe broadband performance of the harvester with power spectral density (PSD) function of signals. As the switch is turned on at a given frequency, the modeling can be derived using cyclostationary theory. The effectiveness of stochastic modeling is validated with experimental measurements and time-domain iterative calculations, and the harvester performance under a band-limited noise excitation is discussed under bell-curved spectra excitations. An optimal switching frequency slightly less than twice the harvester resonant frequency is proved to have the optimal power output under the optimal resistive load. This switching frequency is however dependent on the electromechanical coupling factor of the harvester. Another part of this work discusses the interaction between the host structure and the harvester. The analysis is conducted with a Two-Degree-of-Freedom (TDOF) model. An energy conversion loop is therefore formed between the host structure and the harvester, within the harvester and the resistive load. The TDOF model is verified with Finite Element model and experimental work. An optimal mass ratio is proved to provide the maximal power output. The modeling is further applied to a practical self-powered Structural Health Monitoring system providing the best design of the harvester. A practical consideration of the broadband excitation is also introduced showing the effect of frequency detuning between the host structure and the harvester. Compared to constant force factor case, the harvester performance with a constant electromechanical coupling factor is surprisingly with very little decreases due to the mismatching of harvester and host structure resonant.

Ultra narrow-band filters and the use of two loops in a cascade configuration dominate current clock conditioners based on phase-locked-loop (PLL) schemes. Since a PLL exhibits a low-pass transfer function with respect to the reference clock, the noise performance at very close-to-carrier offset frequencies is still determined by the input signal. Although better cleaning can be achieved with extremely narrow loops, an ultra low cut-off frequency could not be selected since the stability of the configuration deteriorates as the filter bandwidth is reduced. This fact suggests that a full-spectrum clock conditioning is not possible using traditional PLL architectures, and an alternative scheme is necessary to attenuate the very-close-to-carrier phase noise (PN). In addition, ultra-narrow loop filters can compromise on-chip integration because of the large size capacitors needed when chosen as passive. Input signal attenuation with relaxed bandwidth requirements becomes the main aspect that a comprehensive clock cleaner must address to effectively regenerate a reference signal. This dissertation describes the Band-Reject Nested-PLL (BRN-PLL) scheme, a modified PLL-based architecture that provides an effective signal cleaning procedure by introducing a notch in the input transfer function through inner and outer loops and a high-pass filter (HPF). This modified response attenuates the reference-signal PN and reduces the size of the loop-filter capacitors substantially. Ultra narrow loops are no longer required because the notch size is related to the system bandwidth. The associated transfer function for the constitutive blocks (phase detectors and local oscillators) show that the output close-to-carrier and far-from-carrier PN sections are mainly dominated by the noise from the inner-PLL phase detector (PD) and local oscillator (LO) located in the outer loop, respectively. The inner-PLL PD transfer function maintains a low-pass characteristic with a passband gain inversely proportional to the PD gain becoming the main contribution around the carrier signal. On the other hand, the PN around the transition frequency is determined mainly by the reference and the inner-PLL LO. Their noise contributions to the output will depend on the associated passband local maxima, which is located at the BRN-PLL transition frequency. Hence, in this region, the inner-PLL LO is selected so that its effect can be held below that of the outer-PLL PD. The BRN-PLL can use a high-Q MEMS-based VCO to further improve the transition region of the output PN profile and an LC-VCO as outer-PLL LO to reduce the noise floor of the output signal. In particular, two tuning mechanisms are explored for the MEMS-VCO: series tuning using varactors and phase shifting of a resonator operating in nonlinear regime. Both schemes are implemented to generate a tunable oscillator with no PN-performance degradation.

<p>Atoms, molecules and clusters all constitute building blocks of macroscopic matter. Therefore, understanding the electronic and geometrical properties of such systems is the key to understanding the properties of solid state objects.</p><p>In this thesis, some atomic, molecular and cluster systems (clusters of O₂, CH₃Br, Ar/O₂, Ar/Xe and Ar/Kr; dimers of Na; Na and K atoms) have been investigated using synchrotron radiation, and in the two last instances, laser light. We have performed x-ray photoelectron spectroscopy (XPS) on all of these systems. We have also applied ultraviolet photoelectron spectroscopy (UPS), resonant Auger spectroscopy (RAS) and near-edge x-ray absorption spectroscopy (NEXAFS) to study many of the systems. Calculations using <i>ab initio</i> methods, namely density functional theory (DFT) and Møller-Plesset perturbation theory (MP), were employed for electronic structure calculations. The geometrical structure was studied using a combination of <i>ab initio</i> and molecular dynamics (MD) methods.</p><p>Results on the dissociation behavior of CH₃Br and O₂ molecules in clusters are presented. The dissociation of the Na₂ molecule has been characterized and the molecular field splitting of the Na 2<i>p</i> level in the dimer has been measured. The molecular field splitting of the CH₃Br 3<i>d</i> level has been measured and the structure of CH₃Br clusters has been determined to be similar to the structure of the bulk solid. The diffusion behavior of O₂, Kr and Xe on large Ar clusters, as a function of doping rate, has been investigated. The shake-down process has been observed from excited states of Na and K. Laser excited Na atoms have been shown to be magnetically aligned. The shake-down process was used to characterize the origin of various final states that can be observed in the spectrum of ground-state K.</p>

Atoms, molecules and clusters all constitute building blocks of macroscopic matter. Therefore, understanding the electronic and geometrical properties of such systems is the key to understanding the properties of solid state objects. In this thesis, some atomic, molecular and cluster systems (clusters of O2, CH3Br, Ar/O2, Ar/Xe and Ar/Kr; dimers of Na; Na and K atoms) have been investigated using synchrotron radiation, and in the two last instances, laser light. We have performed x-ray photoelectron spectroscopy (XPS) on all of these systems. We have also applied ultraviolet photoelectron spectroscopy (UPS), resonant Auger spectroscopy (RAS) and near-edge x-ray absorption spectroscopy (NEXAFS) to study many of the systems. Calculations using ab initio methods, namely density functional theory (DFT) and Møller-Plesset perturbation theory (MP), were employed for electronic structure calculations. The geometrical structure was studied using a combination of ab initio and molecular dynamics (MD) methods. Results on the dissociation behavior of CH3Br and O2 molecules in clusters are presented. The dissociation of the Na2 molecule has been characterized and the molecular field splitting of the Na 2p level in the dimer has been measured. The molecular field splitting of the CH3Br 3d level has been measured and the structure of CH3Br clusters has been determined to be similar to the structure of the bulk solid. The diffusion behavior of O2, Kr and Xe on large Ar clusters, as a function of doping rate, has been investigated. The shake-down process has been observed from excited states of Na and K. Laser excited Na atoms have been shown to be magnetically aligned. The shake-down process was used to characterize the origin of various final states that can be observed in the spectrum of ground-state K.