This master’s thesis deals with the possibilities of illumination of motor vehicles. Thesis is divided into two sections, from which the first discusses precisely the possibilities of lighting of motor vehicles at the present time. What are the modern lighting techniques, that can be found on the market and what is their impact on safety enhancement in road traffic. Second section is about the practical measurement of low and high beam afterglow. This measurement is being compared between two types of headlamps, namely halogen headlights and xenon headlights. Part of the measurement is as well measurement of illumination intensity precisely for these headlights. The output of measurement is the creation of own illumination intensity diagrams and afterglow diagrams of particular headlights, in comparison to isolux diagrams provided by the headlights manufacturer. Consequently are solved the issues about utilization of the isolux diagrams in expert praxis.

The dissertation is focused on the issue of implementation and evaluation of the laboratory tests fiber reinforced concrete. The issue of steel fiber is solved in terms of their physico-mechanical parameters, which are an important part of their design and reliable operation in the product design. The experimental part of the thesis is focused on laboratory tests of steel fiber of different strength classes and different weight benefits of steel fibers, the default reference mixture of plain concrete are certified mixtures commonly used as structural concrete in construction. The evaluation of the testing of samples produced steel fiber is made by three selected recommending regulations for the design and testing of structural steel fiber. In conclusion, the individual obtained experimental results are compared.

This master's thesis describes the analysis, design and implementation of an application for automatic generation of UML class diagram. Application is designed as a web service, which provides remote access, especially permanent actuality of generated class diagram. Input of the service is a compiled application written for C# .NET or Java platform. The reader is acquainted with basics of reverse engineering of mentioned platforms and with structure of UML class diagram. Then are these knowledge applied in design and implementation of the service. The main goal is to facilitate and accelerate the activities of software development team members.

This work describes 3D reconstruction using stereo vision. It presents methods for automatic localization of corresponding points in both images and their reprojection into 3D space. Application created can be used for navigation of a robot and object avoidance. Second part of the document describes chosen components of the robot. Path finding algorithms are also discussed, particulary Voronoi's diagram.

This Masterâs thesis concerns about the safety of machinery, in the literary research part you can find information about the law system and requirements of European Union and Czech Republic. There is a description of the legal enactments, which the manufacturers of machinery needs to follow. Second part of this thesis is about the safety of a milling center. The milling center is analyzed here, you can find here the description of its components. The milling center was then described with the help of block diagrams. For each component from the block diagram you can find here a list of dangerous situations which can occur and also a list of safety precautions for each situation. Based on these information the list of requirements for the milling center was made.

Title: Finite elements for electromagnetics compatible with de Rham di- agram Author: Vojtěch Rybář Department: Department of Numerical Mathematics Supervisor: prof. Ing. Ivo Doležel, CSc. Abstract: The present work is devoted to the lowest-order finite elements for solving time-harmonic Maxwell's equations in two dimensions. Suc- cessful approximation of these equations requires the finite element spaces to be compatible with the de Rham diagram. However, the most often used basis functions (the Whitney functions) do not comply with this diagram. Therefore, we construct compatible bases and study their prop- erties. Since the construction is not unique, we investigate the influence of the particular choice on the conditioning of the corresponding finite element matrices. Finally, we utilize the special structure of the stiffness matrices, propose a few iterative schemes, and compare their convergence. Keywords: Maxwell's equations, edge finite element, de Rham diagram, finite element basis 1

Verktyg för kvalitetsutveckling är en del av offensiv kvalitetsutveckling. Bland dessa verktygsuppsättningar återfinns de sju ledningsverktygen och de sju förbättringsverktygen. Verktygen hjälper bland annat till att förstå, förklara och stödja beslutsfattandet med hänsyn till att en viktig hörnsten i kvalitetsutveckling grundar sig på att basera beslut på fakta.Denna studie bygger på en systematiserad litteraturöversikt och undersöker hur de sju ledningsverktygen och ishikawa-diagrammet använts och vilka ämnen dessa analyserar inom olika branscher. Detta i syfte att bredda kunskapen kring dessa verktyg.Denna studie bidrar till att verksamheter får det lättare att relatera till snarlika problem eller utmaningar och därigenom välja lämpliga verktyg för en framgångsrik analys.Resultatet visar och bekräftar teorins beskrivningar av verktygens styrkor men också en högre grad av flexibilitet i när det är applicerbart att använda ett visst sorts verktyg. De flesta verktygen användes under analysfasen och i kombination med brainstorming. Bland branscherna är sjukvården frekvent närvarande där verktygen används för processförbättringar. Vidare visar resultatet att verktygen lever och används i högsta grad i den moderna praktiken. / Tools for Quality development are part of Total Quality Management TQM. These toolsets include the seven new management tools and the seven improvement tools. The tools help, among other things, to understand, explain and support decision-making, given that an important cornerstone of quality development is based on basing decisions on facts.This study is based on a systematized literature review and examines how the seven new management tools and the ishikawa diagram have been used and what subjects have been analyzed in different industries. This is in order to broaden the knowledge of these tools.This study helps to make it easier for organizations to relate to similar problems or challenges and thereby choose the appropriate tools for successful analysis.The results show and confirm the theory's descriptions of the tools' strengths but also a higher degree of flexibility in when it is applicable to use a certain type of tool. Most of the tools were used during the analysis phase and in combination with brainstorming. Among the industries, healthcare is frequently present where the tools are used for process improvements. Furthermore, the results show that the tools are alive and are used to a great extent in modern practice. / <p>2020-06-26</p>

This thesis deals with component software, software frameworks for the Eclipse platform and the creation of a graphical editor for designing component systems with the usage of the Eclipse platform. After introducing the conception of UML component diagram, it describes the overview of component software, components and component technologies of major players on ground of component software: OMG, Sun, Microsoft. A significant part is dedicated to software frameworks for the Eclipse platform for manipulating with meta models. EMF, GEF and GMF are described in more detail. The main part presents the design, implementation and evaluation of a graphical editor for designing component systems with emphasis on understandability and good arrangement.

This diploma thesis deals with the design of a mountain hotel with a roof structure made of a reinforced concrete shell. During designing three types of design were assessed. The aim was to find out which of the design solutions is the most suitable for the behaviour of a reinforced concrete structure. The Dlubal RFEM program was used to assess and calculate the internal forces in the structure. In this thesis I also deal with the design and assessment of individual elements of the selected design solution. The thesis also includes drawings of construction plans and drawings of reinforcement plans.

Background: The company has had a low outgoing delivery precision for a prolonged period. This creates problems as orders must be prioritized in order to be produced on time and partial deliveries are used to satisfy customers. The origin of the problem is unknown to the company, but there are suspicions that the problems arise in production. Purpose: The purpose of the study is to contribute to an improved outgoing delivery precision for Företag X. A current state analysis from the inbound to the outbound flow is conducted to find causes of delays. The study creates a prioritization basis for the company to identify the most critical article groups. This creates a tool for decision support, linked to delivery precision, for manufacturing companies. Methods: This study is a case study at Företag X. The study uses secondary data in the form of quantitative data from the company's business system, but primary data in the form of interviews and the author’s own observations. The data is used to create a cause and effect diagram and to perform an ABC/XYZ-analysis on the company's inventory that forms the basis for segmentation of the articles. Conclusions: The study's conclusion is that Företag X's low outbound delivery precision is due to several reasons such as communication gaps, insufficient production planning and measurement &amp; variation in load. The most important cause is production planning. In order to improve this, other causes must also be solved first and Företag X must follow the priority order that the study has developed. Through this, Företag X can get a better outbound delivery precision and a more efficient flow. Keywords: Delivery precision, production planning, ABC/XYZ-analysis, classification, cause and effect diagram