Pacientes portadores de doença pulmonar obstrutiva crônica (DPOC) podem apresentar assincronia toracoabdominal (ATA). Existem diversos métodos de estimativa da ATA, porém, não há um consenso sobre qual é o mais adequado. O objetivo deste estudo foi comparar dois métodos de estimativa da assincronia toracoabdominal e avaliar a ineficiência ventilatória em pacientes DPOC no repouso e durante o exercício. Foram avaliados 22 pacientes com DPOC (VEF1 40,2±10,5% predito) e 13 indivíduos controle (GC) pareados por idade, gênero e índice de massa corpórea. A cinemática toracoabdominal foi avaliada utilizando pletismografia optoeletrônica no repouso e durante o exercício leve e moderado (70% da carga máxima) no ciclo ergômetro. A ATA foi calculada entre a caixa torácica superior (CTS) e inferior (CTI) e o abdome (ABD) utilizando os métodos de ângulo de fase (AF) e relação de fase (RF). A ineficiência ventilatória foi calculada em cada compartimento como a diferença entre o volume máximo (VM) e o volume calculado (VC) de acordo com o ciclo respiratório (determinado pela soma de volume dos três compartimentos) dividida pelo volume máximo (VM-VC)/VM. Os pacientes com DPOC foram classificados como assíncronos (grupo AT) ou não assíncronos (grupo NA) utilizando como referência os valores do GC. Foi utilizado o teste qui-quadrado ou de Fisher para avaliar a discriminação de pacientes entre os métodos e o ANOVA de dois fatores para comparações entre os grupos. O nível de significância foi ajustado para 5%. O método AF determinou maior número de pacientes com ATA quando comparado com RF no repouso (respectivamente, 15 vs. 7) e no exercício leve (11 vs. 3) e moderado (14 vs. 8). Os valores de assincronia no grupo AT entre CTS-CTI e CTI-ABD foram maiores no repouso (AF: 35,7±45,4° e -42,2±42,5° e RF: 61,8±29,1° e -66,9±27,4°, respectivamente) e no exercício leve (AF: 53,3±35,6° e -55,8±40,4°; RF: 106,1±40,3° e - 124,8±17,2°) e moderado (AF: 61,6±55,1° e -75,9±44,8°; RF: 85,9±23,6° e -81,8±42,2°) quando comparados com os grupos NA (p < 0,05) e GC (p < 0,05). Na análise entre CTSABD não houve diferença entre os grupos. Observou-se que o grupo AT apresentou menor contribuição e maior ineficiência ventilatória da CTI em todos os momentos de avaliação e, durante o exercício moderado, menor volume corrente quando comparado com os grupos NA e GC. Os nossos resultados sugerem que o ângulo de fase apresenta maior detecção de ATA nos pacientes com DPOC. A presença de assincronia parece ocorrer principalmente na caixa torácica inferior e associada com menor contribuição e maior ineficiência ventilatória deste compartimento / Chronic obstructive pulmonary disease (COPD) patients can present thoracoabdominal asynchrony (TAA). There are several TAA estimation techniques, however, there is no consensus about which is the most appropriate. The aim of this study was to compare two thoracoabdominal asynchrony quantification techniques and to assess chest wall ventilatory inefficiency in COPD patients at rest and during exercise. We evaluated 22 COPD patients (FEV1 40,2±10,5% predicted) and 13 healthy controls (CG) matched by age, gender and body mass index. Thoracoabdominal kinematics was assessed via optoelectronic plethysmography at rest and during mild and moderate exercise (70 % maximum workload) in a cycle ergometer. TAA was calculated among upper (URC) and lower ribcage (LRC) and abdomen (ABD) by using the phase angle (PA) and phase relation (PR) approaches. Ventilatory Inefficiency was estimated in each compartment as the difference between the maximal volume (VM) and the volume (VC) calculated according to respiratory timing (sum of volume in the 3 compartments) divided by the maximal volume (VM-VC)/VM. COPD patients were classified as asynchronous (AT group) or not (NA group) by using as reference the values on the controls. Chi-square or Fisher\'s exact test was used for assessing the patients differentiation between the two TAA quantification approaches and two-way ANOVA was used to compare respiratory parameters among groups (CG, AT and NA). Statistical significance was set at 5% level. PA approach determined more patients as asynchronous when compared to RF at rest (respectively, 15 vs. 7) and during mild (11 vs. 3) and moderate (14 vs. 8) exercise. Asynchrony values in AT group among URC-LRC and LRC-ABD were greater at rest (respectively, 35.7±45.4° and -42.2±42.5° with PA and 61.8±29.1° and -66.9±27.4° with PR) and during mild (PA: 53.3±35.6° and -55.8±40.4°; PR: 106.1±40.3° and -124.8±17.2°) and moderate exercise (PA: 61.6±55.1° and - 75.9±44.8°; PR: 85.9±23.6° and -81.8±42.2°) when compared to NA (p < 0.05) and CG (p < 0.05). Analysis among URC-ABD presented no difference between groups. It was observed that AT group presented a smaller LRC contribution and greater ventilatory inefficiency during all assessing moments and, during moderate exercise, had a lower tidal volume when compared to NA and CG. Our results suggest that phase angle approach presents larger TAA detection in COPD patients. This asynchrony seems to occur mainly in the lower ribcage and be associated with decreased contribution and increased ventilatory inefficiency of this compartment

This work deal with the analysis of influence of pressure‘s sizes in vacuum chamber of specimen Evironmental Scanning Electron Microscope and the influence of sizes of aperture diaphragm by scintillation detector. The analysis proceeds in detector of secondary electrons. The detector is modelled by system 3D CAD SolidWorks with the help of system CAE Cosmos FloWorks.

This thesis describes the design work for the measurement of air values. The first part describes the airflow, pressure build-up in pipes and losses due to airflow losses. There is also a description of fans and explain their characteristics depending on the pressure generated by airflow. The next part describes the design of the measuring chamber, electronics and control for fully automatic measurement of air quantities.

Mechanical properties of marine sediment near Koper and numerical modelling of a deep excavation Engineering geological conditions near the port Koper in southwestern Slovenia forces geotechnical experts and civil engineers to solve problems in foundation various types of objects and purpose of the practice since the fifties of last century, when it began an intensive development of infrastructure of the port. The results of series of geological and geotechnical surveys, monitoring, and long experience with foundation in the local geology shows that it is almost always the 3rd geotechnical category, or foundation of complex structures in difficult geological conditions below the water table. The entire area belongs to Alpine-Dinaric tectonic area. The rock foundation is composed of complexes of flysch sediments Eocene age at which mounted files of recent marine sediments in the area widely submerged river valley fluvial sands and gravels. From the geotechnical point of view it is interesting site, where most buildings were based on a layer of soft marine sediments, where it is through the creation of special methods implemented in the establishment of deep-level endurable layers of gravel and sand of the river Rižana or at the level footingwall flysch. Set of marine sediments near the port Koper,...

Le bruit généré par la détente d'un écoulement sous pression à travers des plaques multi-perforées ou des diaphragmes est étudié expérimentalement. Cette analyse est menée sur deux configurations géométriques distinctes dans lesquelles la plaque perforée est placée à la sortie d'un conduit cylindrique (configuration de jet libre) ou à l'intérieur de celui-ci (configuration de jet confiné).Dans un premier temps, une étude paramétrique acoustique est effectuée pour ces deux configurations en variant les caractéristiques géométriques des plaques perforées et les points de fonctionnement dans des régimes subsoniques et supersoniques. Les différentes sources de rayonnement pouvant apparaitre sur de tels systèmes de détente, sont alors identifiées. Par ailleurs, les effets acoustiques de chacun des paramètres géométriques sont mis en lumière, offrant ainsi une aide à la conception silencieuse de tels systèmes. Dans un second temps, l'intérêt est porté sur l'analyse de la composante à large bande dominante: le bruit de mélange. Cette étude est menée sur la configuration de jet libre et s'appuie sur des visualisations strioscopiques ainsi que sur des mesures de vélocimétrie par image de particules couplées à des acquisitions acoustiques en champ lointain. Dans le cas des diaphragmes, les différents résultats mettent en évidence des mécanismes sources du bruit de mélange similaires à ceux observés dans la littérature pour les jets isolés issus de tuyères. Le rayonnement à l'aval, dominant, est généré par l'interaction de grosses structures turbulentes cohérentes à la fin du cône potentiel du jet, tandis que dans les autres directions, le bruit est généré par la turbulence de petite échelle dans les couches de cisaillement du jet.Pour les plaques multi-perforées, des mécanismes comparables sont également identifiés. Néanmoins, selon la géométrie de ces plaques, deux zones sources distinctes du rayonnement aval sont identifiées favorisant l'apparition de deux bosses dans les spectres en champ lointain. Dans le cas de perforations éloignées, la bosse à plus haute fréquence domine le spectre aval et l'interaction des grosses structures turbulentes se produit au niveau de la fin du cône potentiel des jets. Lorsque les perforations sont en revanche proches, c'est la bosse à basse fréquence qui domine et l'interaction des grosses structures turbulentes cohérentes semble se produire près de la fin du cône potentiel du gros jet équivalent formé à l'aval à partir du mélange de l'ensemble des jets issus des perforations. Dans les autres directions, l'espacement des perforations joue également un rôle important sur le rayonnement acoustique, du fait d'une interaction plus ou moins rapide des jets entre eux. Cela a alors pour effet de modifier les zones de cisaillement et en conséquence le rayonnement acoustique de la même manière que dans la direction aval. / The noise generated by the expansion of a pressurized flow through multi-perforated plates or diaphragms is experimentally investigated. The analysis is conducted on two distinct geometrical configurations in which the perforated plate is placed at the outlet of (free jet configuration) or inside (ducted jet configuration) a cylindrical duct.Firstly, an acoustic parametric study is carried out on these two configurations for various perforated plate geometries and for a number of operating points ranging from subsonic to supersonic. The different acoustic sources that can arise from such systems are thus identified. Furthermore, the effect of each geometrical parameter onto the radiated sound field is highlighted, thus providing guidelines for the silent design of such pressure release devices.In a second step, the focus is on the dominant broadband component, that is, the mixing noise. This part of the study is dedicated to the free jet configuration and is based on Schlieren imaging, as well as on Particle Image Velocimetry measurements, both coupled far-field sound measurements.In the diaphragm cases, the aerodynamic results show that the source mechanisms are similar to those reported in the literature about isolated jets from conventional nozzles. The downstream radiation is generated by the interaction of large coherent structures at the end of the jet potential core, while in the other directions it is generated by the small-scale turbulence from the shear layer.For multi-perforated plates, comparable mechanisms are also observed. However, depending on the plate geometry, two distinct source regions contributing to the downstream radiation are identified. They explain the presence of two broadband humps in the far-field spectra. In the case of widely spaced perforations, the higher frequency hump in the downstream spectrum increases and the interaction of the large turbulent structures occurs mainly at the end of the potential core of the small jets issuing the perforations. Conversely, when these perforations are close to each other, the small jets rapidly merge into a single larger one that has a longer potential core. As a result, larger coherent structures interact downstream of the small jet mixing region and therefore, a low-frequency hump dominates the downstream spectrum. In the other directions, the perforation spacing has also a significant impact on the acoustic radiation, due to a more or less rapid interaction of the jets. Consequently, the turbulence, as well as the shear zones of the various mixing layers, are modified. The geometric parameters thus have similar effects on the cross-stream as on the downstream radiation.

This Diploma thesis is focused on physical and chemical effects which contribute to the decomposition of organic dyes by diaphragm discharge generated in water solutions. Due to the application of DC high voltage source in continuous regime, there is an effect of electrolysis contributing to the dye decomposition by diaphragm discharge. The aim of this work was to find out when the electrolysis is running (or when is the moment of discharge breakdown) and which factors influence the breakdown. The other goal was decomposition of selected textile and food organic dyes by electrolysis itself. In the theoretical part, theory about creation of electrical discharges in aqueous solutions is noted and various types of underwater discharges are described. Background researches about underwater electrical discharges used in the world are mentioned as well as the use of diaphragm discharges and various ways how to remove organic dyes from wastewater. Finally, theories of electrolysis, UV-VIS spectroscopy and basis of other analytical methods useful for detection of organic molecules are described. Experimental part is oriented to experiment procedure which was carried out in a reactor with separated electrode areas. Separation was made by dielectric diaphragm with a pinhole in the centre. Its initial diameter was 0.4 mm. Used chemicals and course of experiments are described in this part, too. First, the breakdown moment in the reactor was investigated (i. e. determination, when only electrolysis was operating) by formation of hydrogen peroxide and measurement of dynamic (time resolved) electrical characteristics. Next, decomposition of selected dyes by electrolysis was carried out. As the decomposition was related to decolorization of the solution, UV-VIS spectroscopy in the range of 350–700 nm was used for determination of dye concentration. Next part focused on results presents various factors which had an effect on breakdown of diaphragm discharge. These factors are kind of used electrolyte, initial conductivity of solution, kind of dye, temperature of solution and type of reactor (or solution volume). From the result, the most important factor is initial solution conductivity. After the determination of the breakdown moment, the electrolysis of organic dyes was performed. The applied current was 10 mA, initial conductivity was 500 µS/cm and used electrolyte was NaCl. Moreover comparison of dye decomposition in dependence on the different applied power was realized. From this comparison one can assume, there is no significant contribution of electrolysis (the efficiency is approximately 15 %) to the diaphragm discharge in aqueous solution.

This diploma thesis focuses on the construction and technological preparation of the office building in the Lomnického street. The aim of this work is to choose the appropriate construction process. The thesis contains a technical report of a construction and technological project, solutions of wider transport relations, time and financial object plan, itemized budget, design of a site equipment, design of the main building machines and mechanisms, time schedule, technological regulation, inspection and test plan, calculation of two options of the excavation of building pit and details to waterproofing of the substructure. In detail, the thesis is dedicated to secure the building pit enclosed by diaphragm walls.

My diploma thesis is focused on a comparison of direct-current and high frequency (15-80 kHz) electric discharge, which generates non-thermal plasma in water solution of sodium chloride. Mainly current-voltage and Lissajous charts are discussed in the first part of this thesis. These charts describe different discharge phases: electrolysis, bubble formation, discharge breakdown and discharge regular operation in a pin-hole of a dielectric barrier. Influence of frequency, electrolyte conductivity, thickness of the diaphragm (or length of the capillary) and pin-hole diameter on discharge breakdown and bubble generation was studied, too. Measurements were realized in a polycarbonate reactor with total volume of 110 ml, which was divided by a changeable polyacetal insulating wall. This wall divided the reactor into two approximately equal spaces with one stainless steel planar electrode in each part. The Shapal-MTM ceramic discs (thickness of 0.3–1.5 mm and diameter of the central pin-hole of 0.3-0.9 mm) were mounted in the centre of the insulating wall. Initial conductivity of sodium chloride solution was chosen within the interval of 100900 S/cm. The second part of my thesis compares an influence of the direct-current (DC) and high frequency (HF) power sources on physical solution properties (conductivity, pH and temperature) and generation of hydrogen peroxide. A plasma reactor with total volume of 4 l and with mixing set up was divided into two equal spaces with one planar platinum electrode in each part. Diaphragm with thickness of 0.6 mm and pin-hole diameter of 0.6 mm was installed in the middle of the separating wall. Experiment was held at discharge operation of 45 W for 40 minutes with both power sources. Detection of hydrogen peroxide was realised by using a titanium reagent forming a yellow complex, which was analysed by absorption spectroscopy. If HF discharge power is plotted as a function of applied frequency, exponential decrease of frequency with increasing power can be observed. Higher breakdown voltage is necessary for thicker dielectric barriers, on the other hand for bigger diameter of the pin-hole lower breakdown voltage and higher power is needed in DC as well as in HF regime. Breakdown voltage is decreased by the increasing conductivity in both regimes; due to more charge carriers in the higher conductivity lower breakdown voltage is needed. However frequency in HF regime and DC discharge power increases. HF discharge power is decreased by the increasing conductivity. Solution conductivity and temperature are increased by initial conductivity value in both discharge regimes. Solution pH drops to acidic conditions when HF or DC positive regime is applied due to the generation of reactive species and electrolysis (in DC regime). However solution becomes alkaline when DC negative regime is applied. Concentration of hydrogen peroxide is produced linearly when HF or DC negative regime is applied and it depends on initial solution conductivity.