I) Introduction p-Conjugated polymers inherently combine electronic properties of inorganic semiconductor crystals and material characteristics of organic plastics due to their special molecular design. This unique combination has led to developing new unconventional optoelectronic technologies and, further, resulted in the evolution of semiconducting polymers (SCPs) as fundamental components for novel electronic devices, such as organic field-effect transistors (OFETs), organic light-emitting diodes (OLEDs) and organic solar cells (OSCs).[1–5] Moreover, the material flexibility, capability for thin-film formation, and solution processibility additionally allow utilizing modern printing technologies for the large-scale fabrication of flexible, light-weight organic electronics. This especially enables to significantly increase the production speed and, moreover, to drastically reduce the costs per unit.[6, 7] In particular, transistors are the most important elements in modern functional electronic devices because of acting as electronic switches in logic circuits or in displays to control pixels. However, due to molecular arrangement and interactions, the electronic performance of SCPs cannot compete with the one of monocrystalline silicon which is used in state-of-the-art high-performance microtechnology.[5, 8] Nonetheless, intensive and continuing efforts of scientists focused on improving the performance of OFETs, with the special focus on the charge carrier mobility, by optimizing the polymer structure, processing conditions and OFET device architecture. By this, it was possible to identify crucial relationships between polymer structure, optoelectronic properties, microstructure, and OFET performance.[8] Nowadays, the interdisciplinary scientific success is represented by high-performance SCPs with charge carrier mobilities exceeding the value of amorphous silicon.[3, 9] However, further research is essential to enable developing the next generation of electronic devices for application in healthcare, safety technology, transportation, and communication. II) Objective and Results Within the scope of this doctoral thesis, current high-performance p-conjugated SCPs should be studied comprehensively to improve the present understanding about the interdependency between molecular structure, material properties and charge transport. Therefore, the extensive research approaches focused on different key aspects of high charge carrier mobility polymers for organic transistors. The performed investigations comprised the impact of, first, novel design concepts, second, precise structural modifications and, third, synthetic and processing conditions and led to the major findings listed below. 1. The design concept of tuning the p-conjugation length allows to gradually modulate physical material properties and demonstrates that a strong localization of frontier molecular orbitals in combination with a high degree of thin-film ordering can provide a favorable platform for charge transport in p-conjugated semiconducting polymers.[1] 2. The replacement of thiophene units with thiazoles in naphthalene diimide-based p- conjugated polymers allows to increase interchain interactions and to lower frontier molecular orbitals. This compensates the potentially detrimental enhancement of backbone torsion and drives the charge transport to unipolar electron transport, whereas mobility values are partially comparable with those of the respective thiophene containing analogs. 3. p-Conjugated diketopyrrolo[3,4-c]pyrrole-based copolymers can be synthesized within fifteen minutes what, in combination with avoiding aqueous washings and optimizing processing conditions, allowed an increase in morphological and energetic order and, thus, improved the charge transport properties significantly. III) Conclusion The key findings of this doctoral thesis provide new significant insights into important aspects of designing, synthesizing and processing high charge carrier mobility polymers. By this, they can guide future research to further improve the performance of organic electronic devices - decisive for driving the development and fabrication of smart, functional and wearable next-generation electronics. References [1] T. Erdmann, S. Fabiano, B. Milián-Medina, D. Hanifi, Z. Chen, M. Berggren, J. Gierschner, A. Salleo, A. Kiriy, B. Voit, A. Facchetti, Advanced Materials 2016, 28 (41), 9169–9174, DOI:10.1002/adma.201602923. [2] Y. Karpov, T. Erdmann, I. Raguzin, M. Al-Hussein, M. Binner, U. Lappan, M. Stamm, K. L. Gerasimov, T. Beryozkina, V. Bakulev, D. V. Anokhin, D. A. Ivanov, F. Günther, S. Gemming, G. Seifert, B. Voit, R. Di Pietro, A. Kiriy, Advanced Materials 2016, 28 (28), 6003–6010, DOI:10.1002/adma.201506295. [3] A. Facchetti, Chemistry of Materials 2011, 23 (3), 733–758, DOI:10.1021/cm102419z. [4] A. J. Heeger, Chemical Society Reviews 2010, 39, 2354–2371, DOI:10.1039/B914956M. [5] H. Klauk, Chemical Society Reviews 2010, 39, 2643–2666, DOI:10.1039/B909902F. [6] S. G. Bucella, A. Luzio, E. Gann, L. Thomsen, C. R. McNeill, G. Pace, A. Perinot, Z. Chen, A. Facchetti, M. Caironi, Nature Communications 2015, 6, 8394, DOI:10.1038/ncomms9394. [7] H. Sirringhaus, T. Kawase, R. H. Friend, T. Shimoda, M. Inbasekaran, W. Wu, E. P. Woo, Science 2000, 290 (5499), 2123–2126, DOI:10.1126/science.290.5499.2123. [8] D. Venkateshvaran, M. Nikolka, A. Sadhanala, V. Lemaur, M. Zelazny, M. Kepa, M. Hurhangee, A. J. Kronemeijer, V. Pecunia, I. Nasrallah, I. Romanov, K. Broch, I. McCulloch, D. Emin, Y. Olivier, J. Cornil, D. Beljonne, H. Sirringhaus, Nature 2014, 515 (7527), 384–388, DOI:10.1038/nature13854. [9] S. Holliday, J. E. Donaghey, I. McCulloch, Chemistry of Materials 2014, 26 (1), 647–663, DOI: 10.1021/cm402421p.

Applications of conjugated polymer (CPs) in optoelectronic devices are critically depend on nature of thin film morphology. In thin film of CPs, the distribution of conjugation length is highly heterogeneous because of conformational defects, distortions of polymer chain and aggregates. A greater understanding of the self-assembly properties of polymer in solution, in particular control over aggregation leads to richer description of electronic properties and hence reproducible fabrication of thin film devices. Recently, chiral CPs have attracted profound interest because of their promising chiroptical properties in thin films and easy control over the selective agglomeration process. In this thesis, we have investigated the role of chiral side-chains on a series of thiophene diketopyrrolopyrrole (TDPP)-benzodithiophene (BDT) based copolymers. Chiral 3,7-dimethyloctyl chain was introduced as an asymmetric chain to incorporate chirality on one of the repeating unit (TDPP) of copolymers. Two polymers with side-chains of identical chirality (S),(S)-PTDPP-BDT; (R),(R)-PTDPP-BDT and a third polymer with similar side-chains of opposite chirality (R),(S)-PTDPP-BDT were synthesized. The chiroptical properties were investigated by UV-visible and circular dichroism (CD) spectroscopy. Figure 1: The structure of the TDPP-BDT copolymers. The copolymers dissolved in a good solvent (e.g. chloroform, chlorobenzene) in which polymers adopts random coil conformation, no chiral response has been observed. However, a critical addition of non-solvent (methanol), the copolymers stack in a chiral fashion and leads to typical bisignate Cotton effects. It is noteworthy that the two polymers, (S),(S)-PTDPP-BDT and (R),(R)-PTDPP-BDT exhibiting a nearly ideal mirror-image relationship in CD spectra (Figure 2a) whereas the (R),(S)-PTDPP-BDT lacks chiropticity even with the addition of methanol. The aggregation induced CD phenomena are dependent on the temperature of solution and do not exhibit reversibility in a heating-cooling cycle. Figure 2: (a) The mirror image Cotton effects of (S),(S)-PTDPP-BDT and (R),(R)-PTDPP-BDT (b) No CD signal was observed for the (R),(S)-PTDPP-BDT polymer. Figure 3: The variation of (a) UV-vis and (b) CD spectra of (R),(R)-PTDPP-BDT polymer with thickness of the solid film. To investigate the role of thickness and annealing temperature on optical and chiroptical properties of polymer films, thin films were prepared using drop-casting method from a solution of chlorobenzene. Both the polymer showed gradual enhancement of CD signal with the increase of film thickness but we did not see any such order with temperature (Figure 3). Figure 4: The morphology observed for the film by (a) AFM; (b); (c) FESEM. The thin film morphology of polymers is characterized by atomic force microscopy (AFM) and field emission scanning electron microscopy (FESEM) (Figure 4). AFM studies show the polymer molecules self-assembled and formed interconnected nanofibers. Whereas FESEM images clearly revealed that, the nanofibers of polymers are predominantly stack in a chiral fashion and mimic a one-handed helix which leads to bisignate Cotton effects. The (S),(S)-PTDPP-BDT and (R),(R)-PTDPP-BDT form fibers with opposite handedness whereas (R),(S)-PTDPP-BDT do not have such preferred handedness. The research described in this thesis aims to explore the role of chiral side-chains to impose chiral stacking and hence resulting chiral expression. Chirality in this class of polymers may endows them promising optoelectronic properties. (For figures pl see the abstract pdf file)

Dizertační práce pojednává o studiu, syntéze a chemické derivatizaci molekul spadajících do skupiny organických vysoce výkonných pigmentů a jejich potenciálním uplatnění v oblastech organické elektroniky. Teoretická část práce je zaměřena na nejnovější trendy v dané oblasti, a to jak z aplikačního potenciálu konkrétních derivátů, tak z pohledu syntetických možností a jejich strukturálních derivatizací. V experimentální části je pak podrobně popsána příprava pestré škály intermediátů a výsledných produktů, zahrnujících deriváty diketopyrrolopyrrolů (DPP), benzodifuranonu (BDF), epindolidionu (EP), naphthyridinedionu (NTD) a polymeru na bázi thiofenu (PT). Celkově bylo nasyntetizováno 103 molekul, přičemž 49 tvořily výsledné produkty, z nichž 27 bylo zcela nových, dosud nepublikovaných. Hlavním motivem derivatizace molekul pigmentů je zde inkorporace derivátů adamantanu do finálních struktur. V další části práce jsou blíže diskutovány jednotlivé chemické modifikace vedoucí k výsledným produktům. Na sérii N,N'-; N,O'- a O,O'-substituovaných derivátů DPP je popsána komplexní studie vlivu charakteru alkylových řetězců a také pozice jejich navázání v molekule DPP, a to nejen na selektivitu reakce, ale rovněž na optické i termické vlastnosti syntetizovaných produktů.

I) Introduction p-Conjugated polymers inherently combine electronic properties of inorganic semiconductor crystals and material characteristics of organic plastics due to their special molecular design. This unique combination has led to developing new unconventional optoelectronic technologies and, further, resulted in the evolution of semiconducting polymers (SCPs) as fundamental components for novel electronic devices, such as organic field-effect transistors (OFETs), organic light-emitting diodes (OLEDs) and organic solar cells (OSCs).[1–5] Moreover, the material flexibility, capability for thin-film formation, and solution processibility additionally allow utilizing modern printing technologies for the large-scale fabrication of flexible, light-weight organic electronics. This especially enables to significantly increase the production speed and, moreover, to drastically reduce the costs per unit.[6, 7] In particular, transistors are the most important elements in modern functional electronic devices because of acting as electronic switches in logic circuits or in displays to control pixels. However, due to molecular arrangement and interactions, the electronic performance of SCPs cannot compete with the one of monocrystalline silicon which is used in state-of-the-art high-performance microtechnology.[5, 8] Nonetheless, intensive and continuing efforts of scientists focused on improving the performance of OFETs, with the special focus on the charge carrier mobility, by optimizing the polymer structure, processing conditions and OFET device architecture. By this, it was possible to identify crucial relationships between polymer structure, optoelectronic properties, microstructure, and OFET performance.[8] Nowadays, the interdisciplinary scientific success is represented by high-performance SCPs with charge carrier mobilities exceeding the value of amorphous silicon.[3, 9] However, further research is essential to enable developing the next generation of electronic devices for application in healthcare, safety technology, transportation, and communication. II) Objective and Results Within the scope of this doctoral thesis, current high-performance p-conjugated SCPs should be studied comprehensively to improve the present understanding about the interdependency between molecular structure, material properties and charge transport. Therefore, the extensive research approaches focused on different key aspects of high charge carrier mobility polymers for organic transistors. The performed investigations comprised the impact of, first, novel design concepts, second, precise structural modifications and, third, synthetic and processing conditions and led to the major findings listed below. 1. The design concept of tuning the p-conjugation length allows to gradually modulate physical material properties and demonstrates that a strong localization of frontier molecular orbitals in combination with a high degree of thin-film ordering can provide a favorable platform for charge transport in p-conjugated semiconducting polymers.[1] 2. The replacement of thiophene units with thiazoles in naphthalene diimide-based p- conjugated polymers allows to increase interchain interactions and to lower frontier molecular orbitals. This compensates the potentially detrimental enhancement of backbone torsion and drives the charge transport to unipolar electron transport, whereas mobility values are partially comparable with those of the respective thiophene containing analogs. 3. p-Conjugated diketopyrrolo[3,4-c]pyrrole-based copolymers can be synthesized within fifteen minutes what, in combination with avoiding aqueous washings and optimizing processing conditions, allowed an increase in morphological and energetic order and, thus, improved the charge transport properties significantly. III) Conclusion The key findings of this doctoral thesis provide new significant insights into important aspects of designing, synthesizing and processing high charge carrier mobility polymers. By this, they can guide future research to further improve the performance of organic electronic devices - decisive for driving the development and fabrication of smart, functional and wearable next-generation electronics. References [1] T. Erdmann, S. Fabiano, B. Milián-Medina, D. Hanifi, Z. Chen, M. Berggren, J. Gierschner, A. Salleo, A. Kiriy, B. Voit, A. Facchetti, Advanced Materials 2016, 28 (41), 9169–9174, DOI:10.1002/adma.201602923. [2] Y. Karpov, T. Erdmann, I. Raguzin, M. Al-Hussein, M. Binner, U. Lappan, M. Stamm, K. L. Gerasimov, T. Beryozkina, V. Bakulev, D. V. Anokhin, D. A. Ivanov, F. Günther, S. Gemming, G. Seifert, B. Voit, R. Di Pietro, A. Kiriy, Advanced Materials 2016, 28 (28), 6003–6010, DOI:10.1002/adma.201506295. [3] A. Facchetti, Chemistry of Materials 2011, 23 (3), 733–758, DOI:10.1021/cm102419z. [4] A. J. Heeger, Chemical Society Reviews 2010, 39, 2354–2371, DOI:10.1039/B914956M. [5] H. Klauk, Chemical Society Reviews 2010, 39, 2643–2666, DOI:10.1039/B909902F. [6] S. G. Bucella, A. Luzio, E. Gann, L. Thomsen, C. R. McNeill, G. Pace, A. Perinot, Z. Chen, A. Facchetti, M. Caironi, Nature Communications 2015, 6, 8394, DOI:10.1038/ncomms9394. [7] H. Sirringhaus, T. Kawase, R. H. Friend, T. Shimoda, M. Inbasekaran, W. Wu, E. P. Woo, Science 2000, 290 (5499), 2123–2126, DOI:10.1126/science.290.5499.2123. [8] D. Venkateshvaran, M. Nikolka, A. Sadhanala, V. Lemaur, M. Zelazny, M. Kepa, M. Hurhangee, A. J. Kronemeijer, V. Pecunia, I. Nasrallah, I. Romanov, K. Broch, I. McCulloch, D. Emin, Y. Olivier, J. Cornil, D. Beljonne, H. Sirringhaus, Nature 2014, 515 (7527), 384–388, DOI:10.1038/nature13854. [9] S. Holliday, J. E. Donaghey, I. McCulloch, Chemistry of Materials 2014, 26 (1), 647–663, DOI: 10.1021/cm402421p.

Acceptor copolymers with low lowest unoccupied molecular orbital (LUMO) energy levels are key materials for organic electronics. In the present work, quaternization of pyridine-flanked diketopyrrolopyrrole (PyDPPPy) is used to lower the LUMO energy level of the resulting monomer (MePyDPPPy) by as much as 0.7 eV. The drastically changed electronic properties of MePyDPPPy hinder a second methylation step even in an excess of trimethyloxonium tetrafluoroborate and thereby give access to the asymmetric functionalization of N-heterocycle-flanked DPP building blocks. The corresponding n-type polymeric ionene PMePyDPPPyT2 with bithiophene as comonomer forms thixotropic organogels with the p-type polythiophene P(g42T-TT), indicative of specific cross-interactions between this couple of copolymers. Gelation of polymer blend solutions, which is absent for other couples of p-type/ n-type polymers, is of general interest for (co)processing and orientation of different electronic polymers simultaneously into films or filaments. Detailed optical and electronic characterization reveals that films processed from organogels exhibit ground-state electron transfer (GSET) enabled by suitably positioned highest occupied molecular orbital (HOMO) and LUMO energy levels of P(g42T-TT) (−4.07 eV) and PMePyDPPPyT2 (−4.20 eV), respectively. Furthermore, molecular interactions related to gelation and GSET do not appear to significantly influence the morphology of the polymer blend films.

Mechanochromic polymers are force-sensitive materials that change their color as a response to mechanical stimuli. This visualization of forces can be used to further optimize polymer-based materials by understanding microscopic force transduction or to display fatigue of material. Most mechanochromic systems rely on bond cleavage, so they can only distinguish between “on” and “off” state without any further correlation of the applied force with the optical signal. Although reversibility to the initial state is possible for most of these systems, it often demands time or input of energy making them rather unsuitable for sensing forces in real-time. In this work, the development and application of mechanochromic donor (D)-acceptor (A) torsional springs is presented as a new concept for mechanochromic materials. The mechanically induced planarization of D and A leads to a continuous red-shift of both absorption and emission color. A suitable DA-system is found in ortho-substituted diphenyldiketopyrrolopyrrole (o-DPP) having the large torsional angle required for the equilibrium geometry and therefore showing blue-shifted optical spectra compared to reference compounds with a smaller torsional angle. The covalent incorporation into tough poly(meta,meta,para-phenylene) (PmmpP) by Suzuki polycondensation enables sufficient force transduction to the DA spring during uniaxial elongation of thin-film specimens. The detected mechanochromic response correlates with the applied stress and shows full reversibility upon stress release. Theoretical experiments based on density functional theory (DFT) confirm the experimental results and offer a detailed explanation of the molecular deformations responsible for the optical shift. In addition, the application as stress sensor was tested investigating the molecular force transduction in glassy PmmpP as a function of the number average molecular weight (Mn) by blending o-DPP-PmmpP probe chains of varying Mn with pristine PmmpP. The distinct mechanochromic response for entangled and non-entangled probe chains, respectively, allows the extraction of the critical molar mass (Mc) that is required for entanglements to become effective. The resulting value for the entanglement molar mass Me ≈ 1/2 Mc is in excellent agreement with the value determined by rheology.

<p>In the last 30 years, the possibility of using polymeric thin film transistors (PTFTs) in flexible display, sensors, radio-frequency identification tag and the potential of using printing or low-cost reel-to-reel fabrication techniques has stimulated much research and technology development in these devices. However, the utilization of PTFTs needs better understanding of the organic semiconductor material’s properties and their physical and chemical mechanisms. In addition, the PTFTs show poor stability compared to the crystalline transistors. The PTFTs can have significant variations of threshold voltage, mobility, on/off ratio even when deposited using the same conditions on the same substrate. Therefore, better understanding of the PTFTs’ physical and chemical properties and the improvement of the characterization techniques are needed.</p> <p>The design and fabrication of the novel polymeric semiconductor, diketopyrrolopyrrole β-unsubstituted quaterthiophene (DKPP-βT) based bottom-gated top-contact PTFT and microfluidics PTFT are introduced in this thesis. The microfluidic PTFT consists of polydimethylsiloxane (PDMS) microchannel which guides liquids flowing over the top of the semiconductor channel.</p> <p>From consecutive electrical measurements, it was found that the threshold voltage (V_T) follows a logarithmic law function of the time. Illuminating the PTFTs results in shifts of the initial value of the threshold voltage linearly towards more positive value. The mobility is unaffected by time or by illumination. However, the off current increased proportionally with light. Also, the contact resistance extracted by the parameter compensated transmission line model (TLM) method is ohmic and gate bias independent for high gate biases.</p> <p>The novel microfluidic PTFT enables the study of the sensing property of the DKPP-βT PTFT of liquid analytes. The threshold voltage evolution in the deionized (DI) water measurements also follows logarithmic function of the time with a slightly steeper slope than in air. The mobility only slightly decreases initially on exposure to DI water. The off current in DI water measurements decrease compared with air measurements. In acid solution measurements, the threshold voltage remains stable and the mobility slightly increased, compared with measurements in water. Additionally, the subthreshold slope and off current in both acid solution and salt water measurements show similar results to the DI water measurements. While the base solution damages the device immediately. The stable performance of DKPP-βT PTFTs with DI water and low-concentration salt water in the microchannel makes it a promising biosensor.</p> / Master of Applied Science (MASc)

Diketopyrrolopyrrole (DPP)-based polymers currently rank among the best performing organic materials for high charge carrier mobility applications due to their high structural planarity and the simple synthetic access. Through chemical modifications on DPP-based polymers, the type of charge carrier transport (p-type, n-type or ambipolar) and the charge carrier mobility can be both modulated. In this thesis, the synthesis of a new n-type dithiazolyldiketopyrrolopyrrole (TzDPPTz)-based copolymer PTzDPPTzF4 with tetrafluorobenzene (F4) as comonomer is reported. PTzDPPTzF4 has a deeper lowest unoccupied molecular orbital (LUMO) energy level compared to the existing dithienyldiketopyrrolopyrrole (ThDPPTh)-based copolymer PThDPPThF4 due to the electron-deficient thiazole flanking units on the bicyclic DPP core. Moreover, the influence of homocoupling (hc) defects and backbone conformation on the properties of PTzDPPTzF4 is systematically investigated. Lastly, in order to further modulate the structural and electrical properties of DPP-based copolymers, polar side chains and comonomers with a different electron-withdrawing ability are introduced to the polymer backbone. In detail, a series of PTzDPPTzF4 polymers with similar molecular weight but varying TzDPPTz hc content from 0.6 – 12.4% is prepared via direct arylation polymerization (DAP) for the investigation of the hc-property relationship. Hc defects are found to red-shift the absorption, decrease the photoluminescence, and lower the LUMO energy level. In contrast, an influence on the film morphology or electron mobility is not observed. In order to study the conformation-property relationship, a structural variation in the DPP monomer is explored, i.e. the replacement of Tz by Th. To this end, a detailed comparative study of the properties between PTzDPPTzF4 and PThDPPThF4, which are prepared via DAP and have both comparable molecular weight and hc content, is presented. It is found that the replacement of Tz flanking units by Th flanking units on the DPP core has significant impact on the backbone conformation due to the occurrence of intramolecular hydrogen bonds, and thus strongly influences the opto-electronic and structural properties of the two polymers. PThDPPThF4 exhibits a stronger aggregation ability, a higher degree of crystallinity, a lower degree of paracrystallinity and an increased long-range order, which finally translates into a 20 times higher field-effect electron mobility. Finally, comonomer and side chain variations of DPP-based polymers are carried out for their potential use in thermoelectric investigations. Through the optimization of the polymerization conditions, a number-average molecular weight of 19.1 kg/mol is achieved for ThDPPTh-based polymers with single-oxygen side chains and F4 as comonomer. In addition, two ThDPPTh-based copolymers with biEDOT as comonomer are synthesized, which contain polar triethylene glycol (TEG) side chains as well as branched aliphatic side chains in different ratios. In summary, the economically efficient and ecologically green DAP method is demonstrated to be an efficient and versatile synthetic tool for copolymerizing TzDPPTz or ThDPPTh monomers bearing either aliphatic or polar side chains with either electron-rich or electron-deficient comonomers.

La fluorescence excitée à deux photons est actuellement largement utilisée pour l’imagerie de tissus biologiques, mais la faible sensibilité des fluorophores utilisés en microscopie confocale (excitation à un photon) à une excitation à deux photons (ADP) rend nécessaire la conception et la synthèse de nouveaux fluorophores spécifiques pour la microscopie de fluorescence par excitation bi-photonique (MFEB). Mon travail de thèse a ainsi porté sur l’ingénierie moléculaire (conception, synthèse et caractérisations) de nouveaux fluorophores pour la MFEB. Nous nous sommes particulièrement intéressés à des systèmes unidimensionnels (1D) de petite taille comportant des systèmes π étendus autour d’un cœur rigide (dicétopyrrolopyrrole ou DPP) et entourés de différents systèmes électro-actifs. Nous avons modifié par la suite les fluorophores précédents de manière à pouvoir les conjuguer à des molécules d’intérêt biologique, comme des protéines. Ces fluorophores bio-conjugables ont été greffés sur un peptide du virus HIV étudié au laboratoire : TAT (Trans-Activator of Transcription). L’imagerie par microscopie biphotonique a été effectuée avec succès sur des cellules HeLa. Nous nous sommes ensuite tourné vers la mise au point de nouvelles sondes multimodales pour associer la MEBP à une autre modalité d’imagerie : la résonance magnétique nucléaire et la microscopie électronique (imagerie corrélative). Pour ce faire nous avons développé des colorants fluorescents par excitation bi-photonique comportant une entité paramagnétique ou dense aux électrons (nanoparticules de magnétite, ion gadolinium III ou atomes lourds comme le platine et l’or). / Two-photon induced fluorescence is nowadays widely used for the imaging of biological tissues. The classical fluorophores used in confocal microscopy exhibit low sensitivity to two-photon excitation for the two-photon excitation microscopy (TPEM), led the researchers towards the development of new fluorophores, specifically engineered for TPEM. This manuscript describes our work on conception, synthesis and characterizations of new one-dimensional fluorophores based on dicétopyrrolopyrrole (DPP) central core, surrounded by various electro-active systems through π conjugated systems. We also modified such fluorophores to be able to conjugate them to molecules of biological interest, such as proteins. These bio-conjugable fluorophores were grafted on a peptide of HIV virus studied in our laboratory: TAT (Trans-Activator of transcription). The imaging by TPEM was successfully performed on HeLa cells. In addition we developed new multimodal probes for the correlative light electronic microscopy and for the correlative imaging fluorescence microscopy/ Magnetic resonance imaging (MRI). Theses multimodal probes associate a fluorescent moiety based on the DPP core associated to a paramagnetic or electron dense entity (magnetite nanoparticles, gadolinium III or heavy atoms such as platinum or gold).

The present thesis is focused on rational design and synthesis of π-conjugated donor-acceptor (D-A) type oligomers and polymers. It is organized in six different chapters and a brief discussion on the content of the individual chapter is provided below. Chapter 1 briefly describes the charge transport properties of organic semiconductors followed by recent development of different organic semiconducting materials mainly for applications in OFET and solar cells have been highlighted. Chapter 2 explores the synthesis and characterization of two new liquid crystalline, D-A type bithiophene-benzothiazole derivatives. The liquid crystalline properties of the materials have been studied in detail with optical polarizing microscopic images and differential scanning calorimetry and found that these materials possess highly ordered smectic A liquid crystalline phase. Their charge transport properties have also been investigated by fabricating OFET devices. Chapter 3 describes the photophysical properties and OFET performance of quinoxaline based donors-acceptor-donor (D-A-D) type molecules. Depending on the flexibility and rigidity of the conjugated backbone these materials show liquid crystalline behaviour. Investigation of their OFET performance indicated that these molecules exhibit p-type mobility up to 9.7 x 10-4 cm2V-1s-1 and on/ off ratio of 104. Chapter 4 investigates excited state properties and OFET behavior of D-A-D type diketopyrrolopyrrole (DPP) derivatives end-capped with alkoxynaphthalene group. UV-Visible spectroscopy measurement shows strong intramolecular charge transfer (ICT) between donor and acceptor unit. Steady-state and time-resolved fluorescence measurements confirm the formation of excimer. The excited state interactions, the interchromophore separation and geometry of the molecules influence the extent of excimer formation. Finally, the OFET behavior of these DPP based materials has been studied using different dielectric layers. Chapter 5 discusses the synthesis, characterization and properties of two new thieno[3,2-b]thiophene-DPP based donor-acceptor (D-A) type low band gap polymers (PTTDPP-BDT and PTTDPP-BZT). Investigation of OFET performance indicated that polymers exhibited ambipolar behaviour with hole mobility upto 1.0 x 10-3 cm2/Vs and electron mobility upto 8 x 10-5 cm2/Vs. Using polymer PTTDPP-BDT with electron acceptor C70PCBM, power conversion efficiency (PCE) around 3.26% in bulk heterojunction solar cell has been achieved. Chapter 6 describes the approach to tailor the energy levels of conjugated polymers (PTDPP-IDT and PTTDPP-IDT) based on Indacenodithiophene (IDT) coupled with DPP moieties. We have studied the photovoltaic performance of these conjugated polymers by blending with PCBM and P3HT. The importance of these materials in polymer/polymer blend solar cell has been emphasized. The photovoltaic devices with polymer/polymer blend solar cell exhibit high open-circuit voltages (VOC) of ~ 0.8 V. In summary, the work presented in this thesis describes synthesis, characterization and photophysical properties of new organic semiconductors and their importance in optoelectronic devices. This work also describes a general design principle of nonfullerene organic solar cell. The results described here show that these materials have potential application as active components in plastic electronics.