Design, electric vehicle, city mobility, batteries, electricity

This diploma thesis deals with the design of a two-storey extension of a penzion house in Sebranice near Boskovice. The building is located on a flat terrain and is adjacent to the existing building of a country house. The building has a ballroom, new facilities for the existing building, wellness, garage, reception, meeting room, dining room and seven accommodation units for temporary accommodation for a maximum of 18 people. The vertical load-bearing structures are designed from a structural system of ceramic blocks of the HELUZ systém, the building are based on foundation strips. The ceilings and stairs are monolithic reinforced concrete. The roof is sloping, saddle, formed by a purlin system. The work contains project documentation for the construction.

The subject of the diploma thesis is the design of a new building of a free-standing building for housing for the elderly, in the form of project documentation for the construction. The building is designed brick with monolithic reinforced concrete ceilings. Perimeter masonry is designed from ceramic brick blocks th. 300 mm supplemented by contact insulation system ETICS th. 200 mm, which will be provided with silicone plaster with a grain size of 1.5 mm. The internal load-bearing masonry is designed from acoustic ceramic brick blocks of thickness 250 and 300 mm. The partitions are designed from acoustic partitions. The ceilings are designed with a heavy floating floor with excellent acoustic properties. The roof above the two-storey part is designed as a single-skin flat with extensive greenery. Above the three-storey part is a hipped roof made of lattice trusses and sheet metal roofing. The windows are designed with plastic insulating triple glazing. The balcony railing is designed for aluminum with safety glass filling. The building is heated by a gas boiler and controlled ventilation is designed throughout the building using a central recuperation.

Civil two floors building serving as a base for athletes with further use for offices, cafe-bar, a fitness center and billiards club. The building is being designed in Jihlava in the area of football pitches with athletic oval. The building is situated near the cinema, children's playground and the Zoological Garden in Jihlava. Built-up land area is 2006 m2. The maximum capacity of the building is 418 persons and 430 capacity of grandstands. The building is constructed of ceramic bricks Porotherm. The roof construction is made of wooden trusses with a slope of three degrees. The draft of the object emphasizes the building layout, fire safety and energy savings.

The project addresses the new residential building in the cadastral Chotebor city, county Vysočina.Jedná is a four-storey apartment building with two facilities (hairdressers, school). Apartment building has two main entrances A and B which are located in Eastern strany.Objekt the basement, flat-roofed single-shell střechou.Objekt flat is located on parcels 1228,4466,1221 / 1.1227 / 1,1223,1260 / 1.Obvodové walls of the porotherm 30 Profi and is insulated with expanded polystyrenem.Dům is designed with regard to the disposition solutions, safety in use, fire safety, the static page and energy savings

The topic of this diploma thesis is design of new production hall in the cadastral area of city Hrusinec. The building is located in an existing industrial area. The building consists of two adjacent structures. The higher of them is single-story production hall and the lower is three-story high office building. In horizontal plane the buildings have rectangular shape. Hall part is designed as a steel structure on foundation blocks. Roof is supported by truss girders. Office building is designed as a monolithic reinforced concrete skeleton also on foundation blocks. The flat roof of the office building is a single-layer with typical composition. Functionally, the building is designed as a single unit. The total employee capacity is approximately 54 workers.

The new building sport center without cellar. The object is based on strip foundation. The footing bottom is in frost resistant depth. Construction system is in both ways. Vertical walls are made by cut bricks POROTHERM. The external cladding is replenished by thermal insulation plaster POROTHERM TO. Horizontal constructions are made by filigree ceiling panels. Stairway is made by reinforced concrete. Heating system is ensured by gas boiler.

This diploma thesis deals with a project of a road bridge. The bridge is located on a second class road S 7.5/50 and goes over a I/11 road and a local road crossing in Bystřice. Three options of the road bridge are conceived out of which the connected beam girder is chosen for further development. A calculation of the structural stability of the load-bearing construction, that includes time analysis of the construction work (i.e. particular phases of the construction), is added to the project. The structural stability calculation is assessed in accordance with valid European standards. Drawing documentation, a time schedule and 3D visualization of the road bridge is also attached to the diploma thesis.

The submitted diploma thesis deals with the design of a new building for public amenities - Educational and cultural centre in the cadastral area of the municipality Wallachian Bystřice. The building is of a complex ground plan shape that should symbolize crystal growing from the hillside. The building is located in the centre of the village. The building is designed as a single-storey with a technical floor for pipework and ductwork. The building is based on the foundation slab. The bearing structure of the building is created from a reinforced concrete load-bearing wall in combination with wooden circular columns and sandwich panels from KVH profiles. The roof is formed by circular purlins and rafters. The roof structure is a single casing green intensive and extensive. In terms of the features, the building is divided into two main parts consisting of the exhibition part and the congress part, both units have their own entrances and sanitary facilities.

Diploma thesis deals with design documentation of training centerm determined to services for public. Building is situated in Královéhradecký region, in Náchod, cadastral district Náchod, located on 1150/1, 1151/6 and 1152/1 building plots with 1949 m2 area. Trainig center has three floors. In the first floor there is nursery school and in the second and the third floor there are situated rooms of the training center with administration. Center has wheelchair access and private parking spaces. The building is designed as a brick building with Isover insulation system with ventilated facade. Vertical supporting structure is from KM Beta Sendwix and Spiroll ceiling panels – the horizontal supporting structure. The building has not walkeble flat roof structure. Zhe inclination is performed by thermal insulation at a gradient of 3%. For heating there is designed Schiedel Absolut chimney.