No / A low-profile (λ/43) miniaturized multi-element antenna is presented, which displays vertical polarization with an omni-directional radiation pattern. The antenna uses a logarithmic spiral shape as the main radiating element such that the impedance bandwidth of the antenna is much improved in comparison with both a strip-line square spiral design and a strip-line circular spiral design. The antenna demonstrates stable gain and useful efficiency over the operating frequency band. Significantly, the antenna provides a low profile, omnidirectional pattern in the azimuth plane, polarizes normal to the ground-plane with a 1.2% bandwidth and 0.5 dBi gain.

The demand of wireless communication has increased significantly in the past few decades due to huge demand to deliver multimedia content instantly. The expansion of mobile content paired with affordable mobile devices has opened a new trend for having access to the latest information on mobile devices. This trend is made possible by the technology of smart antenna systems as well as array signal processing algorithms. Array signal processing is not limited to wireless communication, but also found in other applications such as radar, sonar and automotive. One of the important components in array signal processing is its ability to estimate the direction of incoming signals known as directional-of-arrival (DOA). The performance of DOA algorithms depends on the steering vector since it contains information about the direction of incoming signals. One of the main factors to affect the DOA estimation is the array geometries since the array factor of the array geometries determines the definition of the steering vector. Another issue in DOA estimation is that the DOA algorithms are designed based on the ideal assumption that the antenna arrays are free from imperfection conditions. In practice, ideal conditions are extremely difficult to obtain and thus the imperfect conditions will severely degraded the performance of DOA estimation. The imperfect conditions include the presence of mutual coupling between elements and are also characteristic of directional antenna. There are three topics being discussed in this thesis. The first topic being investigated is new geometry of antenna array to improve the performance of DOA estimation. Two variants of the circular-based array are proposed in this thesis: semi-circular array and oval array. Another proposed array is Y-bend array, which is a variant of V-shape array. The proposed arrays are being put forward to offer a better performance of DOA estimation and have less acquired area compared with the circular array. It is found out that the semi-circular array has 5.7% better estimation resolution, 76% lower estimation error, and 20% higher estimation consistency than the circular array. The oval array improves the estimation resolution by 33%, estimation error by 60%, and estimation consistency by 20% compared with the circular array. In addition, for the same number of elements, the oval array requires 12.5% to 15% less area than the circular array. The third proposed array, Y-bend array, has 23% smaller estimation resolution, 88% lower estimation error, and 7% higher estimation consistency than the V-shape array. Among the proposed arrays, the semi-circular possessed the best performance with 25% smaller estimation resolution, ten times smaller estimation error, and 5% higher estimation consistency over the other proposed arrays. Secondly, this thesis investigates the DOA estimation algorithm when using the directional antenna array. In this case, a new algorithm is proposed in order to suit the characteristics of the directional antenna array. The proposed algorithm is a modified version of the Capon algorithm, one of the algorithms in beamforming category. In elevation angle estimation, the proposed algorithm achieves estimation resolution up to 1°. The proposed algorithm also manages to improve the estimation error by 80% and estimation consistency by 10% compared with the Capon algorithm. In azimuth angle estimation, the proposed algorithm achieves 20 times lower estimation error and 20% higher estimation consistency than the Capon algorithm. These simulation results show that the proposed algorithm works effectively with the directional antenna array. Finally, the thesis proposes a new method in DOA estimation process for directional antenna array. The proposed method is achieved by means of modifying covariance matrix calculation. Simulation results suggest that the proposed method improves the estimation resolution by 5° and the estimation error by 10% compared with the conventional method. In summary, this thesis has contributed in three main topics related to DOA estimation; array geometry design, algorithm for the directional antenna array, and method in DOA estimation process for the directional antenna array.

Typically, MAC protocols for mobile ad hoc networks assume omnidirectional antennas, and use of directional antennas offers many advantages, such as range extension, reduced co-channel interference, increased the degree of spatial reuse, improved the throughput of networks, and reduced the transmission power. There are many wireless ad hoc MAC protocol have been proposed. However, these protocols do not provide significant improvement of network performance because they can¡¦t let nodes to support multiple simultaneous transmissions or receptions ability. In this paper, we proposed a newly designed MAC protocols, we used adaptive beam-forming system to reduce the co-channel interference problem, and our proposed MAC protocol will enable nodes with multiple simultaneous transmissions and receptions ability. The handshake mechanism of proposed MAC protocol is that used receiver initialize handshake mechanism such as MACA/BI. We changed the Ready-to-Receive (RTR) control packet, which was used to poll neighbor nodes to be a dual-used control packet, Ready-to-Receive-Transmission (RTRT). Our simulation results will show that our proposed MAC protocol do exploit the advantage of space division multiple access that significantly reduced the problem of poor networks throughput which caused by bottleneck nodes in wireless ad hoc networks.

In the purview of efficient communication in MANETs for enhanced data rates and reliable routing of information, this thesis deals with dual polarised directional antenna based communication. This thesis proposes a dual polarised directional communication based cross-layer solution to mitigate the problems of interference, exposed nodes, directional exposed nodes, and deafness, and to achieve efficient routing of information. At the physical layer of network protocol stack, this thesis proposes the use of dual polarised directional antenna for the mitigation of interference. Use of dual polarised directional communication at the physical layer calls for appropriate modifications in the functionality of MAC and network layers. At the MAC layer, the DPDA-MAC protocol proposed in this thesis achieves mitigation of the problems of exposed nodes, directional exposed nodes and deafness, by using dual polarised directional antenna at physical layer. At network layer, the DPDA-MRP protocol presented in this thesis facilitates the discovery of multiple routes between the source and destination nodes to route information in accordance with the desired dual polarised directional communication. To achieve efficient dual polarised directional communication and routing of information, it is essential to maintain well populated Neighbour Table (NT) and Routing Table (RT). This thesis proposes a novel Corruption Detection Pulse (CDP) based technique to handle corruption of broadcast packets such as Link ID and RREQ arising due to hidden node problem. Since the nodes participating in the formation of MANETs have limited battery energy, the protocols proposed in this thesis are featured with a provision for dynamic power control to achieve energy efficient communication. Nodes maintain Received Signal Strength Indicator (RSSI) information in the NT, which along with the information of node location is used in the formulation of decision logic of dynamic power control. Through numerous simulation studies, this thesis demonstrates the benefits of dual polarised directional communication to enhance the performance of MANET. The design principles, benefits and conceptual constraints of proposed DPDA-MAC protocol are analysed with SPDA-MAC and CSMA/CA, while those for DPDA-MRP are analysed with SPDA-MRP and DSR through performance metrics of throughput, Packet Delivery Ratio (PDR) and per hop delay. The thesis also analyses the impact of variations of channel capacity, node density, rate of packet transmission and mobility of nodes on the performance of the proposed and conventional protocols invoked in MANETs.

No description available.

Traditionally medium access control protocols for ad hoc networks have been designed for nodes using omni directional antennas. Through the use of directional antennas, it is possible to obtain higher efficiency. In this thesis we investigate the impact of these antennas on aggregate throughput and end-to-end delay. The use of omni-directional antennas not only results in lower power efficiency, but also decreases network efficiency due to interference caused by the transmission of packets in undesired directions. This thesis explores the effect of using smart antennas and proposes a signaling mechanism for forming the extended links using the network layer. For the performance assessment of the wireless networks using directional antennas, baseline models of phased array antenna and channel have been developed using the discrete event simulator OPNET ModelerTM 8.0. Simulation scenarios have been created for single hop as well as multihop networks. From the results of the simulation we observe that although the nodes forming the extended link experience decrease in end-to-end delay, the data successfully transmitted using extended link is correlated to the spatial distribution of nodes. / Master of Science

Master of Science / Department of Electrical and Computer Engineering / Punit Prakash / Thermal therapies employing interstitial microwave applicators for hyperthermia or ablation are in clinical use for treatment of cancer and benign disease in various organs. However, treatment of targets in proximity to critical structures with currently available devices is risky due to unfocused deposition of energy into tissue. For successful treatment, complete thermal coverage of the tumor and margin of surrounding healthy tissue must be achieved, while precluding damage to critical structures. This thesis investigates two approaches to increase precision of microwave thermal therapy. Chapter 2 investigates a novel coaxial antenna design for microwave ablation (MWA) employing a hemi-cylinderical reflector to achieve a directional heating pattern. A proof of concept antenna with an S₁₁ of -29 dB at 2.45 GHz was used in ex vivo experiments to characterize the antennas’ heating pattern with varying input power and geometry of the reflector. Ablation zones up to 20 mm radially were observed in the forward direction, with minimal heating (less than 4 mm) behind the reflector. Chapter 3 investigates the use of magnetic nanoparticles (MNP) of varying size and geometry for enhancing microwave tissue heating. A conventional dipole, operating at 2.45 GHz and radiating 15 W, was inserted into a 20 mm radius sphere of distributed MNPs and heating measurements were taken 5 mm, 10 mm, and 15 mm radially away. A heating rate of 0.08°C/s was observed at 10 mm, an increase of 2-4 times that of the control measurement. These approaches provide strong potential for improving spatial control of tissue heating with interstitial and catheter-based microwave antennas.

ITC/USA 2009 Conference Proceedings / The Forty-Fifth Annual International Telemetering Conference and Technical Exhibition / October 26-29, 2009 / Riviera Hotel & Convention Center, Las Vegas, Nevada / Most range safety telemetry tracking systems have antenna designs that feature an S-band (2200-2400 MHz) Telemetry Tracking and UHF-Band (400-450 MHz) Command Destruct feed along side an omni-directional antenna. The antennas must have, by design, high angular velocity (w) and acceleration (α) parameters to achieve these tasks. Generally, these parameters are user configurable through software and monitored through BIT (Built In Test) log files. The parameters are nominally set to their maximum values (ie. w=10 deg/sec and α = 15 deg/sec².) Considering the dynamics of a sample satellite launch vs. the ground tracking and omni antennas' combined capabilities, this document analyzes whether the target will stay within the beam.

Wireless communication systems are increasingly deployed by family, businesses, government and SOHO users because of the freedom wireless communications afford, simplicity of installation and ease of use. Along with its rapid development, the security problem in wireless communication network has attracted more and more attention. It has been estimated that the IEEE 80.211 standard is susceptible to attacks both on data content and user authentication, such as eavesdropping, spoofing and Denial of Service. These attacks are due to the standard's inherent flaws and space signal sharing caused by the omni-directional antenna it usually uses. In recent years, few studies have been undertaken which examine the use of the smart directional antenna to mitigate the security risks in mobile wireless computing networks. One of the major reasons is the antenna size, as portability is a key requirement. Due to the dielectric-material embedding and FDTD optimal design technology, a smart antenna with controllable directionality can now achieve an overall volume reduction of 80%. This has promise for application in the wireless security realm. This thesis provides a conventional background in wireless computing networks and security theory. In addition, security level definition, program in Matlab™ and corresponding experimental results are provided. To show the effectiveness of improving security in WLAN with the use of a smart directional antenna, this thesis proposes a model for predicting electromagnetic environments using a directional transmission antenna based on the Finite Element method. To validate the numerical results, a new experimental method (using Network Stumbler software) to measure the signal strength in different locations is introduced. Results from experiments using the two methods are consistent. The latter method gives the users the possibility of using a laptop (with an appropriate wireless card, software and roguing around) to detect the real-time signal strength in different locations instead of using expensive measure apparatus. Such an advantage can be valuable for the efficient implementation of indoor wireless networks for security purposes. Finally, it contributes a security solution using DE-ESMB and DE-ESPAR smart antennas in WLAN. Through these simulated and experimental results, one can conclude that the security performance in WLAN can be greatly improved by using smart directional antenna. There are five chapters in this thesis: Chapter 1 introduces the wireless communication network. Information about architecture, topology and popular wireless standards is presented in this chapter. Chapter 2 investigates the security problem in IEEE 802.11 Standards. Recent improvements in security, and their limitations, are also included. This problem is investigated by performing laboratory experiments, including a real attack on 802.11 Standards and packet capture experiments using AiroPeek NX software. Chapter 3 describes the useful parameters of smart directional antennas, and then presents the security level definition in WLAN. Simple software in Matlab™ to determine the security level according to the beamwidth of the adopted antenna is also introduced. Chapter 4 is the important part of this thesis. Simulation results of signal strength in different locations using FEMLAB™ are presented, which are consistent with the follow-up experimental results carried out in a typical office area. This chapter also describes the final security solution using the newly-designed DE-ESMB and DE-ESPAR directional antennas. Chapter 5 is a summary of the thesis. It presents the conclusions and suggests area of future research for improving the security level using smart antennas in WLAN.

Improving the performance of the wireless multihop ad hoc networks faces several challenges. In omni-directional antenna based solutions, the use of the RTS/CTS mechanism does not completely eliminate the hidden-terminal and exposed-terminal problems. Deafness is an additional challenge to the directional antenna based solutions. This dissertation, first develops analytical models for quantifying the throughput and delay in wireless multihop ad hoc networks. The models consider the impact of hidden terminals using the realistic signal to interference and noise ratio model and consider random node distribution. The proposed analysis is applicable to many wireless MAC protocols and applications. The analytical results reveal several important issues. The first issue is quantifying the impact of adjusting the transmission range on the throughput and delay in wireless multihop ad hoc networks. The other issue is the hidden terminal region is closely related to the distance between the transmitter and the receiver. Thus, it is possible to adjust the transmission range to optimize the whole network performance. These results provide important guidelines for network planning and protocol optimization in wireless multihop ad hoc networks. Second, it proposes a new Enhanced Busy-tone Multiple Access (EBTMA) medium access control (MAC) protocol for minimizing the negative impact of both the hidden-terminal and the exposed-terminal problems. The new protocol can also enhance the reliability of packet broadcasts and multicasts which are important for many network control functions such as routing. Different from other busy-tone assisted MAC protocols, the protocol uses a non-interfering busy-tone signal in a short period of time, in order to notify all hidden terminals without blocking a large number of nodes for a long time. In addition, the proposed EBTMA protocol can co-exist with the existing 802.11 MAC protocol, so it can be incrementally deployed. Third, it investigates how to support the directional antennas in ad hoc multihop networks for achieving higher spatial multiplexing gain and thus higher network throughput. A new MAC protocol called Dual Sensing Directional MAC (DSDMAC) protocol for wireless ad hoc networks with directional antennas is proposed. The proposed protocol differs from the existing protocols by relying on a dual sensing strategy to identify deafness, resolve the hidden-terminal problem and to avoid unnecessary blocking. Finally, this dissertation provides important results that help for network planning and protocol optimization in wireless multihop ad hoc networks in quantifying the impact of transmission range on the throughput and the delay. The accuracy of these results has been verified with extensive discrete event simulations. / Graduate