Studies various nanostructured materials have gained considerable interest within the past several decades. This novel class of materials has opened up a new realm of possibilities, both for the fundamental comprehension of matter, but also for innovative applications. The size-dependent effect observed for these systems often lies in their interaction with the surrounding environment and understanding such interactions is the pivotal point for the investigations undertaken in this thesis. Three families of nanoparticles are analyzed: semiconductor quantum dots, metallic silver nanoparticles and rare-earth oxide nanomaterials. The radical scavenging ability of cerium oxide nanoparticles (CeO2) is quite controversial since they have been labeled as both oxidizing and antioxidant species for biological systems. Here, both aqueous and organic stabilized nanoparticles are examined in straightforward systems containing only one reactive oxygen species to ensure a controlled release. The apparent absence of their direct radical scavenging ability is demonstrated despite the ease at which CeO2 nanoparticles generate stable surface Ce3+ clusters, which is used to explain the redox activity of these nanomaterials. On the contrary, CeO2 nanoparticles are shown to have an indirect scavenging effect in Fenton reactions by annihilating the reactivity of Fe2+ salts. Cadmium selenide quantum dots (CdSe QD) constitute another highly appealing family of nanocolloids in part due to their tunable, size-dependent luminescence across the visible spectrum. The effect of elemental sulfur treatment is investigated to overcome one of the main drawbacks of CdSe QD: low fluorescence quantum yield. Herein, we report a constant and reproducible quantum yield of 15%. The effect of sulfur surface treatment is also assessed following the growth of a silica shell, as well as the response towards a solution quencher (4-amino-TEMPO). The sulfur treated QD is also tested for interaction with pyronin Y, a xanthene dye that offers potential energy and electron transfer applications with the QD. Interaction with the dye molecule is compared to results obtained with untreated quantum dots, as well as CdSe/ZnS core shell examples. In another chapter of this thesis, the catalytic potential of silver nanoparticles is addressed for the grafting of polyhydrosiloxane polymer chains with various alkoxy groups. A simple one-pot synthesis is presented with silver salts and the polymer. the latter serves as a mild reducing agent and a stabilizing ligand, once silver nanoparticles are formed in-situ. We evaluate the conversion of silane into silyl ethers groups with the addition of several alcohols, whether primary, secondary or tertiary, and report the yields of grafting under the mildest conditions: room temperature, under air and atmospheric pressure.

This thesis focuses on pioneering a scalable route to fabricate quantum information devices based upon single InAs/InP quantum dots emitting in the telecommunications wavelength band around 1550 nm. Using metallic gates in combination with nanotemplate, site-selective epitaxy techniques, arrays of single quantum dots are produced and electrostatically tuned with a high degree of control over the electrical and optical properties of each individual quantum dot. Using metallic gates to apply local electric fields, the number of electrons within each quantum dot can be tuned and the nature of the optical recombination process controlled. Four electrostatic gates mounted along the sides of a square-based, pyramidal nanotemplate in combination with a flat metallic gate on the back of the InP substrate allow the application of electric fields in any direction across a single quantum dot. Using lateral fields provided by the metallic gates on the sidewalls of the pyramid and a vertical electric field able to control the charge state of the quantum dot, the exchange splitting of the exciton, trion and biexciton are measured as a function of gate voltage. A quadrupole electric field configuration is predicted to symmetrize the product of electron and hole wavefunctions within the dot, producing two degenerate exciton states from the two possible optical decay pathways of the biexciton. Building upon these capabilities, the anisotropic exchange splitting between the exciton states within the biexciton cascade is shown to be reversibly tuned through zero for the first time. We show direct control over the electron and hole wavefunction symmetry, thus enabling the entanglement of emitted photon pairs in asymmetric quantum dots. Optical spectroscopy of single InAs/InP quantum dots atop pyramidal nanotemplates in magnetic fields up to 28T is used to examine the dispersion of the s, p and d shell states. The g-factor and diamagnetic shift of the exciton and charged exciton states from over thirty single quantum dots are calculated from the spectra. The g-factor shows a generally linear dependence on dot emission energy, in agreement with previous work on this subject. A positive linear correlation between diamagnetic coefficient and g-factor is observed.

<p>A digital microfluidic biochip (DMFB) is a device that digitizes fluidic samples into tiny droplets and operates chemical processes on a single chip. Movement control of droplets can be realized by using electrowetting-on-dielectric (EWOD) technology. DMFBs have high configurability, high sensitivity, low cost and reduced human error as well as a promising future in the applications of point-of-care medical diagnostic, and DNA sequencing. As the demands of scalability, configurability and portability increase, a new DMFB architecture called Microelectrode Dot Array (MEDA) has been introduced recently to allow configurable electrodes shape and more precise control of droplets.</p> <p>The objective of this work is to investigate a routing algorithm which can not only handle the routing problem for traditional DMFBs, but also be able to route different sizes of droplets and incorporate diagonal movements for MEDA. The proposed droplet routing algorithm is based on 3D-A* search algorithm. The simulation results show that the proposed algorithm can reduce the maximum latest arrival time, average latest arrival time and total number of used cells. By enabling channel-based routing in MEDA, the equivalent total number of used cells can be significantly reduced. Compared to all existing algorithms, the proposed algorithm can achieve so far the least average latest arrival time.</p>

This paper details the design and simulation of a fault-tolerant Quantum-dot Cellular Automata (QCA) NOT gate. A version of the standard NOT gate can be constructed to take advantage to the ability to easily integrate redundant structures into a QCA design. The fault-tolerant characteristics of this inverter are analyzed with QCADesigner v2.0.3 (Windows version) simulation software. These characteristics are then compared with the characteristics of two other non-redundant styles of NOT gates. The redundant version of the gate is more robust than the standard style for the inverter. However, another simple inverter style seems to be even more than this fault-tolerant design. Both versions of the gate will need to be studied further in the future to determine which design is most practical. / Thesis (M.S.)--Wichita State University, College of Engineering, Dept. of Electrical and Computer Engineering / "July 2006." / Includes bibliographic references (leaves 31-33)

Studies various nanostructured materials have gained considerable interest within the past several decades. This novel class of materials has opened up a new realm of possibilities, both for the fundamental comprehension of matter, but also for innovative applications. The size-dependent effect observed for these systems often lies in their interaction with the surrounding environment and understanding such interactions is the pivotal point for the investigations undertaken in this thesis. Three families of nanoparticles are analyzed: semiconductor quantum dots, metallic silver nanoparticles and rare-earth oxide nanomaterials. The radical scavenging ability of cerium oxide nanoparticles (CeO2) is quite controversial since they have been labeled as both oxidizing and antioxidant species for biological systems. Here, both aqueous and organic stabilized nanoparticles are examined in straightforward systems containing only one reactive oxygen species to ensure a controlled release. The apparent absence of their direct radical scavenging ability is demonstrated despite the ease at which CeO2 nanoparticles generate stable surface Ce3+ clusters, which is used to explain the redox activity of these nanomaterials. On the contrary, CeO2 nanoparticles are shown to have an indirect scavenging effect in Fenton reactions by annihilating the reactivity of Fe2+ salts. Cadmium selenide quantum dots (CdSe QD) constitute another highly appealing family of nanocolloids in part due to their tunable, size-dependent luminescence across the visible spectrum. The effect of elemental sulfur treatment is investigated to overcome one of the main drawbacks of CdSe QD: low fluorescence quantum yield. Herein, we report a constant and reproducible quantum yield of 15%. The effect of sulfur surface treatment is also assessed following the growth of a silica shell, as well as the response towards a solution quencher (4-amino-TEMPO). The sulfur treated QD is also tested for interaction with pyronin Y, a xanthene dye that offers potential energy and electron transfer applications with the QD. Interaction with the dye molecule is compared to results obtained with untreated quantum dots, as well as CdSe/ZnS core shell examples. In another chapter of this thesis, the catalytic potential of silver nanoparticles is addressed for the grafting of polyhydrosiloxane polymer chains with various alkoxy groups. A simple one-pot synthesis is presented with silver salts and the polymer. the latter serves as a mild reducing agent and a stabilizing ligand, once silver nanoparticles are formed in-situ. We evaluate the conversion of silane into silyl ethers groups with the addition of several alcohols, whether primary, secondary or tertiary, and report the yields of grafting under the mildest conditions: room temperature, under air and atmospheric pressure.

No description available.

Studiens syfte var att se om känslan glädje leder till att man uppmärksammar en viss typ av information i större utsträckning än annan. I detta fall för positivt belönande ord respektive positivt icke belönande ord. Denna studie är en replikering av Tamir &amp; Robinsons (2007) studie som fick belägg för detta. Deltagarna delades in i två grupper där experimentgruppen som bestod av 9 deltagare fick i uppgift att skriva ner en händelse som gjort och fortfarande gör dem glada för att väcka ett tillstånd av glädje. Kontrollgruppen som bestod av 10 deltagare fick istället i uppgift att minnas och skriva ner hur deras sovrum ser ut för att hamna i ett neutralt tillstånd. Deltagarna slumpades in i respektive grupper och fick 5 minuter på sig att göra denna uppgift. Efter uppgiften fick deltagarna fylla i ett formulär som mäter aktuellt känsloläge, och här skilde sig grupperna signifikant från varandra.Glädje var den känslan som skiljde sig signifikant mellan grupperna. Dot probe task användes för att mäta uppmärksamhetsbias men inga signifikanta skillnader mellan grupperna visades. Detta innebär att glädje i denna studie inte styrde uppmärksamheten mot generellt belönande information. E-prime 2.0 användes som verktyg för att bygga och utföra experimentet.

<p>A digital microfluidic biochip (DMFB) is a device that digitizes fluidic samples into tiny droplets and operates chemical processes on a single chip. Movement control of droplets can be realized by using electrowetting-on-dielectric (EWOD) technology. DMFBs have high configurability, high sensitivity, low cost and reduced human error as well as a promising future in the applications of point-of-care medical diagnostic, and DNA sequencing. As the demands of scalability, configurability and portability increase, a new DMFB architecture called Microelectrode Dot Array (MEDA) has been introduced recently to allow configurable electrodes shape and more precise control of droplets.</p> <p>The objective of this work is to investigate a routing algorithm which can not only handle the routing problem for traditional DMFBs, but also be able to route different sizes of droplets and incorporate diagonal movements for MEDA. The proposed droplet routing algorithm is based on 3D-A* search algorithm. The simulation results show that the proposed algorithm can reduce the maximum latest arrival time, average latest arrival time and total number of used cells. By enabling channel-based routing in MEDA, the equivalent total number of used cells can be significantly reduced. Compared to all existing algorithms, the proposed algorithm can achieve so far the least average latest arrival time.</p>

Currently, a major challenge for solid-state spin qubit systems is achieving one-qubit operations on a timescale shorter than the spin coherence time, T2*, a goal currently two orders of magnitude away. By taking advantage of the quasi-one-dimensional structure of a nanowire and the strong spin-orbit interaction of InAs, it is estimated that π-rotations can be implemented using electric dipole spin resonance on the order of 10 ns. To this end, a procedure for the fabrication of homogeneous InAs nanowire quantum dot devices is presented herein for future investigations of solid state spin qubits as a test bed for quantum computing. Both single and double quantum dot systems are formed using local gating of InAs nanowires. Single quantum dot systems were characterized through electron transport measurements in a dilution refrigerator; in one case, the charging energy was measured to be 5.0 meV and the orbital energy was measured to be 1.5-3.5 meV. The total capacitance of the single quantum dot system was determined to be approximately 30 aF. An estimate of the quantum dot geometry resulting from confinement suggests that the quantum dot is approximately 115 nm long. The coupling energy of the double quantum dot system was measured to be approximately 4.5 meV. The electron temperature achieved with our circuitry in the dilution refrigerator is estimated to be approximately 125 mK.

<p>This dissertation develops a novel application of the resonant-infrared matrix-assisted pulsed laser evaporation (RIR-MAPLE) technique toward the end goal of conjugated-polymer-based optoelectronic device fabrication. Conjugated polymers are attractive materials that are being investigated in the development of efficient optoelectronic devices due to their inexpensive material costs. Moreover, they can easily be combined with inorganic nanomaterials, such as colloidal quantum dots (CQDs), so as to realize hybrid nanocomposite-based optoelectronic devices with tunable optoelectronic characteristics and enhanced desirable features. One of the most significant challenges to the realization of optimal conjugated polymer-CQD hybrid nanocomposite-based optoelectronics has been the processes by which these materials are deposited as thin films, that is, conjugated polymer thin film processing techniques lack sufficient control so as to maintain preferred optoelectronic device behavior. More specifically, conjugated-polymer-based optoelectronics device operation and efficiency are a function of several attributes, including surface film morphology, internal polymer chain morphology, and the distribution and type of nanomaterials in the film bulk. Typical conjugated-polymer thin-film fabrication methodologies involve solution-based deposition, and the presence of the solvent has a deleterious impact, resulting in films with poor charge transport properties and subsequently poor device efficiencies. In addition, many next-generation conjugated polymer-based optoelectronics will require multi-layer device architectures, which can be difficult to achieve using traditional solution processing techniques. These issues direct the need for the development of a new polymer thin film processing technique that is less susceptible to solvent-related polymer chain morphology problems and is more capable of achieving better controlled nanocomposite thin films and multi-layer heterostructures comprising a wide range of materials. Therefore, this dissertation describes the development of a new variety of RIR-MAPLE that uses a unique target emulsion technique to address the aforementioned challenges.</p><p>The emulsion-based RIR-MAPLE technique was first developed for the controlled deposition of the conjugated polymers poly[2-methoxy-5-(2'-ethyl-hexyloxy)-1,4-phenylene vinylene] (MEH-PPV) and poly[2-methoxy-5-(2'ethylhexyloxy)-1,4-(1-cyanovinylene) phenylene] (MEH-CN-PPV) into homogenous thin films. Therein, it was identified that target composition had the most significant influence on film surface morphology, and by tuning the concentration of hydroxyl bonds in the target bulk, the laser-target absorption depth could be tuned so as to yield more or less evaporative deposition, resulting in films with tunable surface morphologies and optical behaviors.</p><p>Next, the internal morphologies of emulsion-based RIR-MAPLE-deposited MEH-PPV thin films were investigated by measuring their hole drift mobilities using the time-of-flight (TOF) photoconductivity method in the context of amorphous materials disorder models (Bässler's Gaussian Disorder model and the Correlated Disorder model) in order to provide a quantitative measure of polymer chain packing. The polymer chain packing of the RIR-MAPLE-deposited films was demonstrated to be superior and more conducive to charge transport in comparison to spin-cast and drop-cast MEH-PPV films, yielding enhanced hole mobilities.</p><p>The emulsion-based RIR-MAPLE technique was also developed for the deposition of different classes of inorganic nanoparticles, namely un-encapsulated nanoparticles and ligand-encapsulated nanoparticles. These different classes of nanoparticles were identified to have different film growth regimes, such that either rough or smooth films were obtained, respectively. The ligand-encapsulated nanoparticles were then co-deposited with MEH-PPV as conjugated polymer-CQD hybrid nanocomposites, wherein the distributions of the constituent materials in the film bulk were identified to be tunable, from homogeneous to highly clustered. The RIR-MAPLE deposition regime determined the said distributions, that is, if the polymer and CQDs were sequentially deposited from a sectioned target or simultaneously deposited from a single target, respectively. The homogeneous conjugated polymer-CQD nanocomposites were also investigated in terms of their charge transport properties using the TOF photoconductivity technique, where it was identified that despite the enhanced dispersion of CQDs in the film bulk, the presence of a high concentration of CQDs degraded hole drift mobility, which indicates that special considerations must be taken when incorporating CQDs into conjugated-polymer-based nanocomposite optoelectronics.</p><p>Finally, the unique capability of RIR-MAPLE to enable novel conjugated polymer-based optical heterostructures and optoelectronic devices was evaluated by the successful demonstration of a conjugated polymer-based distributed Bragg reflector (DBR), a plasmonic absorption enhancement layer, and a conjugated polymer-based photovoltaic solar cell featuring a novel electron-transporting layer. These optical heterostructures and optoelectronic devices demonstrate that all of the constituent polymer and nanocomposite layers have controllable thicknesses and abrupt interfaces, thereby confirming the capability of RIR-MAPLE to achieve multi-layer, conjugated polymer-based heterostructures and device architectures that are appropriate for enhancing specific desired optical behaviors and optoelectronic device efficiencies.</p> / Dissertation