Fundação de Amparo a Pesquisa do Estado de Minas Gerais / In the context of the so-called smart materials, shape memory alloys (SMA) have been extensively investigated aiming at various applications in different types of engineering prob- lems as well as interdisciplinary problems. Specifically, SMAs have been used for the mitiga- tion of mechanical vibrations, owing to their characteristic pseudoelastic effect, which is re- sponsible for the occurrence of hysteresis. Another relevant feature of these materials is the coexistence of two crystallographic phases (martensite and austenite), which have dissimilar mechanical properties, whose relative fractions depend on temperature and stress. In the present dissertation, this latter feature is explored in association with a strategy of passive vibration control which is based on tunable dynamic vibration absorbers (TDVA). These de- vices, once connected to a vibrating structure, can have their inertia and/or stiffness and/or damping adjusted to match the excitation frequency. Specifically, such tuning is achieved by controlling the martensite/austenite fraction by applying convenient thermal loads. By means of numerical simulations, which include the integration of the equations of motion, it is put in evidence the possibility of tuning a TDVA applied to a single degree-of-freedom system, with- in a given frequency band using two configurations of the resilient element (SMA rod and helicoidal spring). The results enable to evaluate the levels of vibration mitigation achieved and confirm that the strategy investigated can provide improved performance in terms of vibration attenuation. / No contexto dos chamados materiais inteligentes, as ligas com memória de forma (Shape Memory Alloys SMA) vêm sendo intensivamente investigadas com vistas a aplicações em diversos tipos de sistemas de engenharia e em problemas interdisciplinares. Especificamente, as SMA têm sido utilizadas para a mitigação de vibrações mecânicas, graças ao chamado efeito pseudoelástico, responsável pela ocorrência de histerese. Outra característica relevante desses materiais é a coexistência de duas fases cristalográficas (martensita e austenita), com propriedades mecânicas distintas, cujas frações relativas dependem da temperatura e da tensão. No presente trabalho, esta última característica é explorada em associação com uma estratégia de controle passivo de vibrações, baseada nos chamados absorvedores dinâmicos de vibrações sintonizáveis (ADV), que são dispositivos conectados à estrutura vibratória, cuja rigidez e/ou inércia podem ser ajustados em conformidade com a frequência de excitação, de modo que a vibração da estrutura seja altenuada. Especificamente, explora-se a possibilidade de confecção de ADVs sintonizáveis cuja rigidez pode ser ajustada por meio de variações controladas da fração relativa martensita/austenita induzidas por alterações da temperatura. Por meio de simulações numéricas, evidencia-se a possibilidade de sintonizar um ADV aplicado a um sistema vibratório de um grau de liberdade, dentro de uma dada faixa de valores de frequência, utilizando duas configurações do elemento resiliente (barra e mola helicoidal de SMA), e quantificam-se as reduções de amplitudes obtidas. Os resultados das simulações confirmam o aumento da eficiência na atenuação de vibrações proporcionado pela estratégia empregada. / Mestre em Engenharia Mecânica

Truck drivers spend all day moving goods. They are exposed to vibrations every time they drive. Modern cabin suspension and an air-suspended seat already offer a high level of comfort. This, however, is designed for vertical dynamics and you can observe the cab of a truck performs large pitching vibrations during acceleration. These are examined here. A pitch model of the cabin is set up for this purpose. On the basis of this model it is examined which reduction of the vibration can be achieved by the use of a hydraulically translated vibration absorber. The advantage of this absorber is the use of the hydraulic transmission to reduce the heavy mass at high absorber inertia. 4 kg of fluid mass act as 131 kg absorber mass reducing vibrations by more than 10%. The conventional vibration absorber is inacceptable due to the additional load. The investigation based on VDI 2057 Part 1 shows that driving comfort can be increased.

Performance of static analysis of the London Eye structure is the subject of this diploma thesis. First chapters of the thesis analyses overview of realized structures of the Ferris wheel. The main part of the thesis analyses the London Eye structure itself. Specifically are described response analyses, sensitivity analyses, analyses of ultimate limit state and serviceability, stress analyses, analyses of fatigue stress and lifetime analyses. The thesis describes among static analysis also a design of dynamic vibration absorbers. The results of each analysis are evaluated in the final chapters.

L'usure ondulatoire des rails associée aux vibrations de torsion des essieux de métro a été mise en évidence il y a près d'un demi siècle. L'utilisation d'absorbeurs dynamiques comme solution potentielle à ce problème a été suggérée pour la première fois dans le projet américain du TCRP "Rail Corrugation Mitigation in Transit" en 1998. Cette thèse, réalisée dans le cadre du projet européén "Wheel-rail CORRUGATION in Urban transport", a pour objectif de concevoir un absorbeur dynamique et d'étudier son influence sur la réduction de l'usure ondulatoire liée aux vibrations de torsion. Dans le cadre de ce travail, d'autres types d'usure ondulatoire ont également été traités par des absorbeurs dynamiques.<p><p>Les trois premiers chapitres de cette thèse sont dédiés à la description des différents types d'usure ondulatoire et à la présentation des méthodes de prédiction. La méthode de dimensionnement des absorbeurs dynamiques est présentée au chapitre 4, ainsi que quelques perspectives de leur efficacité à réduire l'usure ondulatoire. Dans le chapitre 5, un tronçon réel du RER parisien a été étudié. D'une part les prédictions obtenues par différentes méthodes ont été comparées aux mesures sur site. D'autre part, le bénéfice résultant de l'utilisation d'un absorbeur dynamique a été étudié numériquement. Dans le chapitre 6, le cas de l'usure ondulatoire liée aux vibrations de torsion a été étudié spécifiquement. Un absorbeur dynamique a été développé pour réduire ce type d'usure ondulatoire. Son efficacité a été évaluée théoriquement et numériquement, avec un modèle multi-corps flexible du véhicule et de la voie. Dans le chapitre 7, un absorbeur dynamique visant à réduire les vibrations de torsion d'un essieu de métro à échelle réduite a été construit au laboratoire. Son efficacité a été validée expérimentalement en reproduisant les conditions d'apparition des vibrations de torsion de l'essieu sur le banc d'essais du Laboratoire des Technologies Nouvelles de l'INRETS. La correspondance entre les prédictions d'usure à échelle réduite et à échelle réelle a été établie. Une demande de brevet a été déposée par le Laboratoire des Structures Actives pour ce système (N° 06120344.4). / Doctorat en sciences appliquées / info:eu-repo/semantics/nonPublished