The aim of my dissertation work was to create an application for pocket PC with operating system Windows Mobile and touch screen, an application that would enable to position the current location of the pocket PC based on the GPS data, on distance measurement between two and more points of which the location is obtained from GPS, and on measurement of territory surface defined by certain number of points obtained from the GPS. The application also enables to display the characteristics of the received GPS signal, information about the number of visible satellites and also information about maximum deviation from positioning. In order to increase the accuracy of the positioning, an averaging function has been implemented. As additional function, a possibility of route location has been created. It measures the passed distance and records some other route characteristics. The application has been successfully tested on pocket PC E-ten M600+ and GPS receiver Navilock but it has been designed with general-purpose and should be compatible with all devices working with operating system Windows Mobile and touch screen. The text section of my dissertation work describes the positioning principle on the basis of satellites with known position, deals with the accuracy of these systems and describes few possibilities how to increase their accuracy. It also discusses the NMEA 0183 Protocol that is used by the majority of GPS modules for communication. The text section also describes several mathematic and cartographic calculations needed for realization of the application. In the end of the text section there is a detailed description of the created application.

Thesis deals with comparison of influence of chosen solution method on pre crash movement of vehicles in one simulation program and on differences between calculations for one method in different programs. Compared solution methods are kinematics and dynamics solutions of pre crash movement, compared programs are Virtual CRASH and PC-Crash.

Today, the telecommunication world is focused on mobility. This is popular because since the 1990s most people have integrated their mobile phones into their life. A new factor is the rise of the voice over IP(VoIP) technology, with VoIP over Wireless LANs (WLANs) as the clear next growth area for mobile communications. The purpose of this thesis was to understand how to save power based upon changing when some operations are performed in a VoIP client. In order to do this, we decided to port minisip to an HP iPAQ 5500 Personal Digital Assistant (PDA), in order to explore some of the issues of running such a client on a PDA - due to its constraints with regard to storage, processing power, and battery power. Minisip is a SIP open source user agent running on Linux and Windows. This thesis builds upon earlier theses which showed that minisip can offer a secure communications platform with the latest functions which are desired in a mobile personal VoIP system. However, most of these earlier theses utilized desktop, laptop, or server based system, i.e., with few resources constrains. The focus of this thesis was to examine the case of a highly constrained user platform such as an iPAQ. / Dagens telekommunikationssystem fokuserar på mobilitet. Detta har blivit populärt under 90-talet då mobilitet blev naturligt integrerad i människans vardagliga liv i form av exempelvis mobiltelefoner. Voice over IP (VoIP) har blivit en stor del av dagen teknik där trådlösa system Wireless LANs (WLANs) har blivit en större del av mobilkommunikation. Målet med denna rapport är att förstå hur strömförbrukningen kan minimeras genom att utföra vissa operationer med hjälp av en VoIP-klient. För att åstadkomma detta porterade vi minisip, en SIP agent som är baserad på öppen källkod och körs på Linux och Windows, till en HP iPAQ 5500, en så kallad Personal Digital Assistant (PDA). Vi valde PDAn för att kunna utforska de begränsningar den medför i form av lagringsutrymme, processorkapacitet, och batteri. Denna rapport bygger vidare på tidigare rapporter som visar att minisip kan erbjuda en säker kommunikationsplattform med de senaste funktionerna som önskas i mobila VoIPsystem. De flesta av dessa tidigare rapporter baseras på system med få begränsningar rörande resurser såsom stationära- eller bärbara datorer samt serverbaserade system. Denna rapports fokus är att utforska detta fall i en miljö med större begränsningar på resurser som till exempel en iPAQ.

>Magister Scientiae - MSc / This thesis presents a system for performing whole gesture recognition for South African Sign Language. The system uses feature vectors combined with Hidden Markov models. In order to construct a feature vector, dynamic segmentation must occur to extract the signer's hand movements. Techniques and methods for normalising variations that occur when recording a signer performing a gesture, are investigated. The system has a classification rate of 69%.

This thesis deals with a development of application running on mobile devices with Windows Mobile operating system. The main task of this application is observing canvas with running presentation and saving time marks, that inform about slide change or animation. Description of system requirements, system analysis using UML language, solutions on image processing level, decription of implementation in C++ language and application tests results are described in the text. Problems of mobile device software development are also outlined in the document. A great part is dedicated to work with multimedia on Windows Mobile 5.0 system, especially to problems linked with DirectShow technology.

No description available.

No description available.

No description available.

This paper presents a two-level morphological description of Tagalog for use in PC-Kimmo and a mechanism created for updating the results output from PC-Kimmo in order to meet the standards for current database and natural language processing applications. There are two main research tasks presented in this paper which constituted this project. First, a complete morphological engine for Tagalog is presented. Next, a tool is introduced that takes the morphological engine output and stores it in XML format.

Model glassy polymers, polymethyl methacrylate (PMMA) and polycarbonate (PC) are used to experimentally probe several aspects of polymer fracture. In Chapter 1, the method of pre-stress is employed as a means of improving the fracture properites of brittle PMMA. Samples are tested under equi-biaxial compression, simple shear and a combination of biaxial compression and shear. Equi-biaxial compression is shown to increase the threshold stress level for projectile penetration whereas shear pre-stress has a large effect on the overall energy absorbed during an impact. There is also an apparent interaction observed between compression and shear to dramatically increase the threshold stress. Pre-stressed laminates of PMMA and PC show an increase in damage area because of the unique formation of a secondary cone. In Chapter 2, the effect of stress state on stress relaxation in PMMA and PC is investigated. Direct comparisons are made between uniaxial and biaxial loading conditions. The experimental methods used highlight the effect of hydrostatic stress on the relaxation process. The data shows an increase in relaxation time and increase in the breadth of the relaxation spectrum with increases in hydrostatic stress. This suggests that the stress state can have a significant effect on the useful lifetime of pre-stressed articles. In Chapter 3, Mode I and II fracture studies are performed from quasi-static to low velocity impact rates on PMMA and PC. Mode II testing utilizes an angled double-edge notched specimen loaded in compression. The shear banding response of PMMA is shown to be highly sensitive to rate, with diffuse shear bands forming at low rates and sharp distinct shear bands forming at high rates. As the rate increases, shear deformation becomes more localized to the point where Mode II fracture occurs. PC is much less rate dependent and stable shear band propagation is observed over the range of rates studied with lesser amounts of localization. A new theory is formulated relating orientation in a shear band to intrinsic material properties obtained from true-stress true-strain tests. In a qualitative sense the theory predicts the high rate sensitivity of PMMA. A kinematic limit for orientation within a shear band is also derived based on entanglement network parameters. Mode II fracture in PMMA is shown to occur at this kinematic limit. For the case of PC, the maximum impact rates were not high enough to reach the kinematic limit. In Chapter 4, the deformation response, as observed in a shear band is interpreted through the characterization of the "intrinsic material properties" obtained from true stress - true strain 8compression tests. The relatively high rate sensitivity of PMMA deformed at room temperature is related to the proximity of the beta transition to the test temperature. This is also shown in corollary experiments on PC where deformation near the beta transition is accompanied by an increase in rate sensitivity. Physical aging results in a more narrow alpha transition and is shown to increase strain localization and decrease rate sensitivity at low strain rates.