Spelling suggestions: "subject:"electrolyzer"" "subject:"lectrolyzer""
1 |
On-the-Modelling of a Green Hydrogen System : Electrolyzer- and Fuel Cell ModelingGeorge, Ludwig January 2022 (has links)
With the ongoing increasing focus on the development of intermittent renewable sources, there is a clear need for energy storage solutions that can handle large fluctuations in power and store large amounts of energy. Hydrogen i seen as a candidate as a possible energy carrier for this purpose, and many hydrogen projects have been seen occurring over the world. In order to enable further development of hydrogen systems for the production and utilization of hydrogen fuel, modeling can be performed to investigate the performance, feasibility, and responses of these systems. There is, however, a need for further development of electrolyzer models for production, and fuel cell models for the utilization of hydrogen fuels. The goal of this thesis is to further develop models of electrolyzers and fuel cells with an electrical engineering perspective to be used in further research. This is done by reviewing relevant research related to these topics and narrowing down the findings into comprehensive, simple, and dynamic models in MATLAB/Simulink. These models are described in this thesis, along with the obtained static and dynamic results of the hydrogen production and utilization systems. The models include the option to parameterize to the steady-state data to replicate the static behavior and specify dynamics in terms of capacitive effects and reactant pressure controls for the fuel cell. The Simulink models created can be utilized to further develop various other system components.
|
2 |
Utilization of waste heat from hydrogen production : A case study on the Botnia Link H2 Project in Luleå, SwedenMiljanovic, Andrea, Jonsson, Fredrik January 2022 (has links)
The global hydrogen demand is steadily increasing, and one way of accelerating the green hydrogen supply is to stimulate the green hydrogen economy. Utilization of waste heat from hydrogen production can increase the profitability of produced green hydrogen. Therefore, the aim of this study is to propose a system for integration of waste heat on the district heating (DH) network in Luleå, Sweden. Furthermore, an economic evaluation of the proposed system was conducted. In this study, the system was developed and investigated for two cases i.e. for a PEM and alkaline electrolyzer with an installed capacity of 100 MW. A large-scale heat pump and a heat exchanger were further added to the system to integrate the waste heat on the DH-network, while simultaneously providing cooling to the electrolyzer stack. The system was modelled for static conditions in the software MATLAB, with retrieved hourly DH data from Luleå Energi. The results showed that 203 060 MWhth can be extracted from the PEM electrolyzer with a waste heat temperature of 79 oC, while 171 770 MWhth can be integrated on the DH network annually. For the alkaline electrolyzer, 310 630 MWhth can be extracted at a waste heat temperature of 80 oC, while 226 220 MWhth can be integrated on the DH annually. The overall system efficiency is 94.7 % and 88.4 % for PEM and alkaline connected systems, respectively. Furthermore, the Levelized Cost of Heat (LCOH) is 0.218 SEK/kWhth and 0.23 SEK/kWhth for a PEM and alkaline connected system, respectively. For future scenarios with fourth generation of DH-networks, it is predicted that the LCOH can reach 0.018 SEK/kWth for a PEM electrolyzer system, and 0.017 SEK/kWth for an alkaline electrolyzer system. One conclusion that can be drawn from this study is that the utilized heat from the proposed system is price competitive in comparison with other thermal energy sources.
|
3 |
Combined Coal Gasification and Alkaline Water Electrolyzer for Hydrogen ProductionHerdem, Munur Sacit January 2013 (has links)
There have been many studies in the energy field to achieve different goals such as energy security, energy independence and production of cheap energy. The consensus of the general population is that renewable energy sources can be used on a short-term basis to compensate for the energy requirement of the world. However, the prediction is that fossil fuels will be used to provide the majority of energy requirements in the world at least on a short-term basis. Coal is one of the major fossil fuels and will be used for a long time because there are large coal reservoirs in the world and many products such as hydrogen, ammonia, and diesel can be produced using coal.
In the present study, the performance of a clean energy system that combines the coal gasification and alkaline water electrolyzer concepts to produce hydrogen is evaluated through thermodynamic modeling and simulations. A parametric study is conducted to determine the effect of water ratio in coal slurry, gasifier temperature, effectiveness of carbon dioxide removal, and hydrogen recovery efficiency of the pressure swing adsorption unit on the system hydrogen production. In addition, the effects of different types of coals on the hydrogen production are estimated. The exergy efficiency and exergy destruction in each system component are also evaluated. Although this system produces hydrogen from coal, the greenhouse gases emitted from this system are fairly low.
|
4 |
Environmental Assessment of Electrolyzers for Hydrogen Gas ProductionSundin, Camilla January 2019 (has links)
Hydrogen has the potential to become an important energy carrier in the future with many areas of applications, as a clean fuel for transportation, heating, power generation in places where electricity use is not fit, etc. Already today hydrogen plays a key role in numerous industries such as petroleum refineries and chemical industries. There are different production methods for hydrogen. Today, natural gas reforming is the most commonly used. With the growing importance of green production paths, hydrogen production by electrolysis is expected to grow. Two main electrolyzer technologies are used today; alkaline and polymer electrolyte membrane electrolyzer. High-temperature electrolyzers are also interesting techniques, where solid oxide is under development and molten carbonate electrolyzers is researched. In this thesis, a comparative life cycle analysis was performed on the alkaline and molten carbonate electrolyzer. Due to inaccurate inventory data for the molten carbonate electrolyzer, those results are excluded from the published thesis. The environmental performance of the alkaline electrolyzer technology was compared to that of the solid oxide and the polymer electrolyte membrane electrolyzers. The system boundaries were set as cradle to gate. Thereby, the life cycle steps included in the study are raw material extraction, electrolyzer manufacturing, hydrogen production, and transports in between these steps. The functional unit was chosen as 100 kg produced hydrogen gas. The results show that the polymer electrolyte membrane electrolyzer has the lowest environmental impact out of the compared technologies. It is also determined that the lifetime and the current density of the electrolyzers have significant impact on their environmental performance. Moreover, it is established that electricity for hydrogen production has the highest environmental impact out of the electrolyzers life cycle steps. Therefore, it is important to make sure that the electricity used for hydrogen production derives from renewable sources. / Vätgas har potential att spela en viktig roll som energibärare i framtiden med många användningsområden, såsom ett rent bränsle för transporter, uppvärmning, kraftförsörjning där elproduktion inte är lämpligt, med mera. Redan idag är vätgas ett viktigt inslag i flera industrier, där ibland raffinaderier och kemiska industrier. Det finns flera metoder för att producera vätgas, där reformering av naturgas är den största produktionsmetoden idag. I framtiden spås vätgasproduktion med elektrolys bli allt viktigare, då hållbara produktionsprocesser prioriteras allt mer. Idag används främst två elektrolysörtekniker, alkalisk och polymerelektrolyt. Utöver dessa är högtemperaturelektrolysörer också intressanta tekniker, där fastoxidelektrolysören är under utveckling och smältkarbonatelektrolysören är på forskningsstadium. I det här examensarbetet har en jämförande livscykelanalys utförts på alkalisk- och smältkarbonatelektrolysören. På grund av felaktiga indata för smältkarbonatelektrolysören har dessa resultat uteslutits från den publika rapporten. Miljöpåverkan från den alkaliska elektrolysören har sedan jämförts med miljöpåverkan från fastoxid- och polymerelektrolytelektrolysörerna. Systemgränserna sattes till vagga till grind. De livscykelsteg som inkluderats i studien är därmed råmaterialutvinning, elektrolysörtillverkning, vätgasproduktion och transporter mellan dessa steg. Den funktionella enheten valdes till 100 kg producerad vätgas. Resultaten visar att polymerelektrolytteknologin har den lägsta miljöpåverkan utav de tekniker som jämförts. Resultaten påvisar också att livstiden och strömtätheten för de olika teknikerna har signifikant påverkan på teknikernas miljöpåverkan. Dessutom fastslås att elektriciteten för vätgasproduktion har högst miljöpåverkan utav de studerade livscykelstegen. Därför är det viktigt att elektriciteten som används för vätgasproduktionen kommer ifrån förnybara källor.
|
5 |
Techno-economic fesibility of a hybrid CSP (sCO2) - PV plant for hydrogen productionPerez De La Calle, Patricia January 2023 (has links)
The global need to eliminate CO2 emissions and its consequent reduction in the use of fossil fuels drives the ongoing energy transition that highly involves the research achievements of the scientific community to reach the goals of this purpose. Renewable sources like photovoltaic and wind energy, are central to this endeavor, however, the intermittency of natural resources makes it non-dispatchable and energy storage is fundamental. According to the European Roadmap [1] just a 60% of the CO2 emissions reduction goal can be achieved with available technologies and existing energy. However, the production, use and specially storage opportunities that hydrogen offers can drive non-dispatchable renewable sources to achieve its full potential by clearing up the intermittency problem as well as covering the remained 40% gap. This master's thesis aims to investigate the techno-economic feasibility of integrating a Solid Oxide Electrolyzer Cell (SOEC) into a hybrid PV-CSP(sCO2) plant. The study focuses on assessing various indicators related to electricity, energy, and hydrogen production prices. To achieve this, three different integration strategies within the hybrid PV-CSP(sCO2) plant were selected for analysis: Soec using heat from the particles coming from the receiver, soec using heat coming from the particles available in the thermal energy storage (TES) and soec recovering heat from the sCO2 power block. A sensitivity analysis was conducted on different PV sizes (MWp), battery capacities (MWh), and SOEC installed capacities (MWh) to investigate the technology's potential in the plant and determine optimal sizing of subsystems. However, the individual optimization of economic indicators presented technical and economic challenges. Scenarios allowing individual optimization of hydrogen production prices (€/kg H2) resulted in 10.9, 11.7, and 14.6 €/kg h2 for receiver, TES, and sCO2 integration strategy, respectively. These scenarios, however, require high SOEC installed capacities, leading to elevated electricity and energy production prices. On the other hand, the individual optimization of electricity and energy production prices led to better and lower results when no hydrogen production presence within the plant. However, this analysis also showed that soec capacities below 5MWh together with no installation of batteries and a new definition for calculating hydrogen production prices (LCOH) allows feasible integration of hydrogen production within the plant. LCOH(€/kg h2) results were 10.2€/kg h2, 7.6€/kg h2, and 9.4€/kg h2 for receiver, TES, and sCO2, respectively, for a soec installed capacity of 0.5MWh (119m2 size) along with energy production values not exceeding 101€/MWh. While the results present a favorable outlook for SOEC installations based on literature review data [2] [3] [4] they still face challenges when competing with the cost-efficient PEM technology, which offers 4.5-5.5€/kg H2 [5] without storage. Nonetheless, this research contributes valuable insights into the integration of SOEC technology within hybrid renewable energy systems and provides a comprehensive analysis of the techno-economic aspects related to hydrogen production following different integration strategies. The findings may inform decision-making processes and promote further advancements in sustainable energy solutions. / Det globala behovet av att eliminera CO2utsläpp och därmed minska användningen av fossila bränslen driver pågående energiomställning, som starkt involverar forskningsresultaten från vetenskapssamhället för att nå syftet med detta mål. Förnybara källor som solceller och vindkraft är centrala i detta arbete, men intermittensen hos naturliga resurser gör dem icke disponibla och energilagring är grundläggande. Enligt den europeiska vägkartan [1] kan endast 60% av målet att minska CO2-utsläppen uppnås med tillgängliga teknologier och befintlig energi. Produktionen, användningen och särskilt lagringsmöjligheterna som väte erbjuder kan emellertid driva icke-disponibla förnybara källor att nå sin fulla potential genom att lösa intermitt ensproblemet och täcka den återstående 40% klyftan. Detta examensarbete syftar till att undersöka den tekniskekonomiska genomförbarheten av att integrera en fastoxid elektrolysör (SOEC) i en hybrid PV CSP(sCO2)-anläggning. Studien fokuserar på att utvärde ra olika indikatorer relaterade till el-, energi- och vätgasproduktionspriser. För att uppnå detta har tre olika integrationsstrategier inom hybrid PV CSP(sCO2) anläggningen valts för analys: SOEC med hjälp av värme från partiklar som kommer från mottagaren, SOEC med hjälp av värme från partiklar som finns i termisk energilagring (TES) och SOEC som återvinner värme från sCO2-kraftblocket. En känslighetsanalys har genomförts för olika PVstorlekar (MWp), batterikapaciteter (MWh) och SOEC installerade kapacit eter (MWh) för att undersöka teknologins potential i anläggningen och bestämma optimal dimensionering av delsystem. Resultaten från individuell optimering av ekonomiska indikatorer ledde dock till flera tekniska och ekonomiska utmaningar. Scenarier som tillåter individuell optimering av vätgasproduktionspriser (€/kg H2) resulterade i 10, 9, 11, 7 respektive 14,6 €/kg H2 för mottagare, TES och sCO2 integrationsstrategi. Dessa scenarier kräver dock höga SOEC installerade kapaciteter, vilket leder till höga el och energipriser. Å andra sidan ledde individuell optimering av el och energiproduktionspriser till bättre och lägre resultat när ingen vätgasproduktion fanns i anläggningen. Denna analys visade också att SOEC kapaciteter under 5MWh tillsammans med ingen installation av batterier och en ny definition för beräkning av vätgasproduktionspriser (LCOH) möjliggör genomförbar integration av vätgasproduktion i anläggningen. LCOH (€/kg H2) resultaten var 10,2 €/kg h2 , 7 ,6 €/kg h2 respektive 9,4 €/kg h2 för mottagare, TES och sCO2, för en SOEC installerad kapacitet på 0,5 MWh (storlek 119m2) tillsammans med energiproduktionsvärden som inte överstiger 101 €/MWh. Medan resultaten visar en gynnsam utsikt för SOECinstallationer baserat på data från litteraturöversikter [2] [3] [4], står de ändå inför utmaningar när de konkurrerar med den kostnadseffektiva PEM teknologin, som erbjuder 4,5-5,5 €/kg H2 [5] utan lagring. Trots detta bidrar forskningen med värdefulla insikter i integrationen av SOEC teknologi i hybrid förnybara energisystem och ger en omfattande an alys av de teknisk-ekonomiska aspekterna relaterade till vätgasproduktion enligt olika integrationsstrategier. Resultaten kan informera beslutsprocesser och främja ytterligare framsteg inom hållbara energilösningar.
|
6 |
Photovoltaic Electrolysis Propulsion SystemJanuary 2015 (has links)
abstract: CubeSats are a newly emerging, low-cost, rapid development platform for space exploration research. They are small spacecraft with a mass and volume of up to 12 kg and 12,000 cm3, respectively. To date, CubeSats have only been flown in Low Earth Orbit (LEO), though a large number are currently being designed to be dropped off by a mother ship on Earth escape trajectories intended for Lunar and Martian flyby missions. Advancements in propulsion technologies now enable these spacecraft to achieve capture orbits around the moon and Mars, providing a wealth of scientific data at low-cost. However, the mass, volume and launch constraints of CubeSats severely limit viable propulsion options.
We present an innovative propulsion solution using energy generated by onboard photovoltaic panels to electrolyze water, thus producing combustible hydrogen and oxygen for low-thrust applications. Water has a high storage density allowing for sufficient fuel within volume constraints. Its high enthalpy of formation provides more fuel that translates into increased ∆V and vastly reduced risk for the launch vehicle. This innovative technology poses significant challenges including the design and operation of electrolyzers at ultra-cold temperatures, the efficient separation of the resultant hydrogen and oxygen gases from liquid water in a microgravity environment, as well as the effective utilization of thrust to produce desired trajectories.
Analysis of the gas combustion and flow through the nozzle using both theoretical equations and finite-volume CFD modeling suggests an expected specific impulse of 360 s. Preliminary results from AGI's Satellite Toolkit (STK) indicate that the ΔV produced by the system for an 8kg CubeSat with 6kg of propellant in a LEO orbit (370 km altitude) is sufficient for an earth escape trajectory, lunar capture orbit or even a Mars capture orbit. These results suggest a promising pathway for an in-depth study supported by laboratory experiments to characterize the strengths and weaknesses of the proposed concept. / Dissertation/Thesis / Masters Thesis Aerospace Engineering 2015
|
7 |
Nové typy membrán pro elektrolyzér vodík - kyslík / New types of membranes for electrolyzer hydrogen - oxygenHýbl, Jiří January 2010 (has links)
This work deals with the production of hydrogen and oxygen by electrolysis. Aims of this thesis are to measure different types of membranes and choose the best for use in elektrolyzer for hydrogen and oxygen production. Properties of membranes were tested in the laboratory electrolyzer in the short and long operation. The emerging gases from elektrolyzer were also tested on a gas chromatograph to determine the purity of produced hydrogen. At the same time are also tested different concentrations of KOH elektrolyte and the effect of concentrations on efficiency of electrolyzer.
|
8 |
Levelised cost of green hydrogen produced at onshore wind farm sites : A case study comparing local production in Sweden and importing from ChileMoberg, Torun January 2022 (has links)
Hydrogen can be produced via water electrolysis, a process powered by electricity, and is often called green hydrogen if the electricity source is renewable. The purpose of this thesis is to investigate the levelised cost of hydrogen, LCOH, from two hypothetical scenarios of green hydrogen production at onshore wind farm sites. The hydrogen is used in steel manufacturing. One scenario is set in Chile, a country with excellent wind conditions, where a large wind farm of around 1 GW supplies both a hydrogen and ammonia production. Ammonia is used as a hydrogen carrier since it is easier to transport, and the ammonia is shipped to Sweden where it is decomposed into hydrogen. The Swedish scenario includes three cases with wind farms of 28.5, 114 and 285 MW (case 1, 2 and 3), where the sites are located close to the steel plant. Both the Chilean and Swedish scenarios consist of a base case and a sensitivity analysis, all simulated in MATLAB. Parameters such as equipment efficiency and cost, levelised cost of wind energy, shipping and transportation costs, electricity price and electrolyser size were analysed to see how they affect the LCOH. The results showed that the Chilean case both could meet the hydrogen demand of a commercial steel plant and has a lower LCOH than most Swedish scenarios. The LCOH in the base case was 2.17 €/kg H2 for the Chilean case and 6.71, 6.29 and 5.14 €/kg H2, respectively, for case 1, 2 and 3. The sensitivity analysis showed that case 3 had a similar or lower LCOH than the Chilean case when it was connected to the grid, and could sell excess wind electricity, or for electrolysers of at least 100 MW. Case 3 could supply the smallest of the suggested steel plant sizes, and it would require an around three times larger wind farm and hydrogen production site to reach the level of the Chilean case. However, the Swedish case could be preferred if other factors, such as security of supply, local connection or the exclusion of fossil fueled transports, are more important than low cost and hydrogen volume.
|
9 |
Study of Seal Glass for Solid Oxide Fuel/Electrolyzer CellsMahapatra, Manoj Kumar 24 January 2010 (has links)
Seal glass is essential and plays a crucial role in solid oxide fuel/electrolyzer cell performance and durability. A seal glass should have a combination of thermal, chemical, mechanical, and electrical properties in order to seal different cell components and stacks and prevent gas leakage. All the desired properties can simultaneously be obtained in a seal glass by suitable compositional design. In this dissertation, SrO-La₂O₃-A₂O₃-B₂O₃3-SiO₂ based seal glasses have been developed and composition-structure-property relationships have been investigated. B₂O₃ free SrO-La₂O₃-Al₂O₃-SiO₂ based seal glass is the most suitable and its compatibility with the metallic interconnects and sealing performances have been evaluated.
A seal glass should be stable for 5,000-40,000 hrs in the oxidizing and reducing atmospheres at 600-900°C but both the thermal and chemical stability is a persistent problem. The effect of Al₂O₃ on a SrO-La₂O₃-Al₂O₃-B₂O₃-SiO₂ based seal glass has been studied to improve the thermal properties, such as glass transition temperature, softening temperature and thermal expansion coefficient, and the thermal stability. Al₂O₃ improves the thermal stability but does not significantly affect the thermal properties of the seal glass.
Comprehensive understanding of composition-structure-property relationships is needed to design a suitable seal glass. The thermal properties and stability of a borosilicate seal glass depend on the B2O3:SiO2 ratio in the composition. The role of B₂O₃:SiO₂ ratio on the glass network structure of the SrO-La₂O₃-Al₂O₃-B₂O₃-SiO₂ based seal glasses has been studied using Raman spectroscopy and nuclear magneto resonance spectroscopy. The thermal properties and thermal stability were correlated with the glass network structure and the calculated network connectivity. This study shows that the thermal properties degrade with increasing B₂O₃:SiO₂ ratio due to increase in the non-bridging oxygen and decrease in the network connectivity. High B₂O₃:SiO₂ ratio induces BO4 and SiO4 structural unit ordering, increases micro-heterogeneity, and subsequently degrades thermal stability. B₂O₃ free SrO-La₂O₃-Al₂O₃-SiO₂ seal glass shows the best combination of the thermal properties and thermal stability among the studied glasses.
Nickel or nickel oxide is added into a seal glass to modify the thermal properties depending on the specific composition. The role of nickel as a network former or modifier and its effect on the thermal properties and thermal stability of the SrO-La₂O₃-Al₂O₃-SiO₂ based seal glasses have been investigated. Nickel is a modifier in this glass system and does not improve the thermal properties but degrades thermal stability by decreasing network connectivity and inducing micro-heterogeneity.
The interconnect-seal glass interface stability is the most crucial for solid oxide fuel/electrolyzer cell. Crofer 22 APU and AISI 441 alloys are the preferred interconnects. The interfacial stability of the SrO-La₂O₃-Al₂O₃-SiO₂ based seal glass with these alloys have been studied as a function of time (0-1000 hrs), temperature (700-850°C), atmospheres (air, argon, and H₂O/H₂) using scanning electron microscopy (SEM), energy dispersive spectroscopy (EDS), and X-ray diffraction analysis (XRD). Complementary analytical techniques such as wave length dispersive spectroscopy (WDS) and SEM of thin samples were also carried out for selected samples. This study shows good interfacial stability of the SrO-La₂O₃-Al₂O₃-SiO₂ based seal glass with these alloys for the studied conditions.
A suitable seal glass should be hermetic and withstand 100-1000 thermal cycles for practical application. Sealing performances of the SrO-La2O3-Al2O3-SiO2 based seal glass have been evaluated by pressure-leakage method. The seal glass is hermetic for at least 2000 hrs and withstands 100 thermal cycles. Overall, present work shows that the SrO-La₂O₃-Al₂O₃-SiO₂ based glass has all the desired properties and suitable for solid oxide fuel/electrolyzer cell seal. / Ph. D.
|
10 |
Analysis of a Clean Energy Hub Interfaced with a Fleet of Plug-in Fuel Cell VehiclesSyed, Faraz January 2011 (has links)
The ‘hydrogen economy’ represents an energy system in which hydrogen and electricity are the dominant energy carriers for use in transportation applications. The ‘hydrogen economy’ minimizes the use of fossil fuels in order to lower the environmental impact of energy use associated with urban air pollution and climate change. An integrated energy system is required to deal with diverse and distributed energy generation technologies such a wind and solar which require energy storage to level energy availability and demand. A distributed ‘energy hub’ is considered a viable concept in envisioning the structure of an integrated energy system. An energy hub is a system which consists of energy input/output, conversion and storage technologies for multiple energy carriers, and would provide an interface between energy producers, consumers, and the transportation infrastructure. Considered in a decentralized network, these hubs would form the nodes of an integrated energy system or network.
In this work, a model of a clean energy hub comprising of wind turbines, electrolyzers, hydrogen storage, a commercial building, and a fleet of plug-in fuel cell vehicles (PFCVs) was developed in MATLAB, with electricity and hydrogen used as the energy carriers. This model represents a hypothetical commercial facility which is powered by a renewable energy source and utilizes a zero-emissions fleet of light duty vehicles. The models developed herein capture the energy and cost interactions between the various energy components, and also calculate the CO2 emissions avoided through the implementation of hydrogen economy principles. Wherever possible, similar models were used to inform the development of the clean energy hub model. The purpose of the modelling was to investigate the interactions between a single energy hub and novel components such as a plug-in fuel cell vehicle fleet (PFCV). The final model reports four key results: price of hub electricity, price of hub hydrogen, total annual costs and CO2 emissions avoided. Three scenarios were analysed: minimizing price of hub electricity, minimizing total annual costs, and maximizing the CO2 emissions avoided.
Since the clean energy hub could feasibly represent both a facility located within an urban area as well as a remote facility, two separate analyses were also conducted: an on-grid analysis (if the energy hub is close to transmission lines), and an off-grid analysis (representing the remote scenarios).
The connection of the energy hub to the broader electricity grid was the most significant factor affecting the results collected. Grid electricity was found to be generally cheaper than electricity produced by wind turbines, and scenarios for minimizing costs heavily favoured the use grid electricity. However, wind turbines were found to avoid CO2 emissions over the use of grid electricity, and scenarios for maximizing emissions avoided heavily favoured wind turbine electricity. In one case, removing the grid connection resulted in the price of electricity from the energy hub increasing from $82/MWh to $300/MWh.
The mean travel distance of the fleet was another important factor affecting the cost modelling of the energy hub. The hub’s performance was simulated over a range of mean travel distances (20km to 100km), and the results varied greatly within the range. This is because the mean travel distance directly affects the quantities of electricity and hydrogen consumed by the fleet, a large consumer of energy within the hub. Other factors, such as the output of the wind turbines, or the consumption of the commercial building, are largely fixed. A key sensitivity was discovered within this range; the results were ‘better’ (lower costs and higher emissions avoided) when the mean travel distance exceeded the electric travel range of the fleet. This effect was more noticeable in the on-grid analysis. This sensitivity is due to the underutilization of the hydrogen systems within the hub at lower mean travel distances. It was found that the greater the mean travel distance, the greater the utilization of the electrolyzers and storage tanks lowering the associated per km capital cost of these components. At lower mean travel distances the utilization of the electrolyzers ranged from 25% to 30%, whereas at higher mean travel distances it ranged from 97% to 99%. At higher utilization factors the price of hydrogen is reduced, since the cost recovery is spread over a larger quantity of hydrogen.
|
Page generated in 0.0283 seconds