Folien aus mehrwandigen Kohlenstoffnanoröhren, auch Buckypaper genannt, stellen eine vielversprechende Alternative zu herkömmlichen Schirmmaterialien für elektromagnetische Strahlung dar. Zum Aufbau eines grundlegenden Verständnisses und zur Verbesserung der Verarbeitbarkeit gegenüber kommerziell erhältlichem Buckypaper, wurden nach Auswahl eines geeigneten Herstellungsverfahrens Buckypaper aus unterschiedlichen Nanomaterialien hergestellt. Zur Untersuchung der Auswirkung ausgewählter Herstellungsparameter erfolgte dabei eine Parametervariation mittels statistischer Versuchsplanung. Zusätzlich wurden im Vorfeld weitere Einflussfaktoren betrachtet. Dadurch konnten unterschiedliche Einwaagemengen und Rohmaterialien, verschiedene Lösungsmittel und Konzentrationen der Nanomaterialien sowie diverse Prozessparameter des angewandten Nassprozesses untersucht werden. Im Rahmen der Charakterisierung der hergestellten Proben, mittels unter anderem Vierleiter- und Schirmdämpfungsmessung sowie Rasterelektronenmikroskopie, wurden die signifikanten Einflüsse der untersuchten Parameter identifiziert und beschrieben. Es konnten dadurch sehr homogene Buckypaper mit hoher Leitfähigkeit und guter Schirmungseffektivität hergestellt werden, die eine verbesserte Grundlage für die weitere Entwicklung mikrostrukturierter Schutzfolien bilden. Aus dem Ergebnis der Arbeit lassen sich optimale Herstellungsparameter von Buckypaper für den Einsatz als Schirmmaterial im Bereich der elektromagnetischen Verträglichkeit ermitteln. / Freestanding multiwalled carbon nanotube sheets, also known as buckypaper, represent a promising alternative for various applications, especially for electromagnetic interference shielding. In order to develop a fundamental understanding and improve the processability compared to commercially available buckypaper, sheets from different nanotube materials were produced after a suitable manufacturing process had been selected. Design of experiments was used to investigate the effects of various manufacturing parameters. Other influencing factors were considered in advance. Several raw materials of different weights, varying solvents and concentrations of the nanomaterials as well as various processing parameters of the applied wet process were thereby examined. Significant influences on the properties of produced buckypaper were identified during characterization by, among other means, four-point probe, shielding attenuation measurements and scanning electron microscopy. From the result, optimal manufacturing parameters can be determined. Thus, very homogeneous buckypaper with high electrical conductivity as well as good mechanical strength and shielding effectiveness could be produced. This provides a solid foundation for further development of frequency selective electromagnetic interference shields.

Esta tese apresenta três novos ataques a equipamentos de pagamento eletrônico que possuem teclado mecânico, conhecidos como \"PIN pads\". Mostramos de três formas distintas como tais equipamentos possuem vulnerabilidades de segurança na camada física que permitem o vazamento do PIN (Personal Identification Number) quando o mesmo é digitado. Demonstramos experimentalmente que é possível inferir com elevada taxa de acerto (100% em um dos ataques) a senha digitada, de forma não-invasiva. Os ataques desenvolvidos são baseados na introdução de sensores nos próprios equipamentos ou em seu ambiente de operação: acelerômetros para análise de vibração, microfones para análise acústica e células de carga para medição de forças do pressionamento. Devido à massificação no uso de sensores por dispositivos de consumo, o roubo de informação por meios não convencionais é atividade crescente. Os resultados dos ataques de baixo custo realizados expõem sérias deficiências no processo de certificação de segurança de tais equipamentos. / This thesis presents three new attacks on electronic payment equipment having mechanical keypads, known as \"PIN pads\". We show in three different ways how they have security vulnerabilities at the physical layer allowing the leak of the PIN (Personal Identification Number) when it is entered. We experimentally demonstrated that it is possible to infer with high success rate (100% in one of the attacks) the password entered on the device, in a non-invasive way. The attacks are based on the placement of sensors inside the equipment itself or in its operating environment: accelerometers for doing vibration analysis, microphones for acoustic analysis and load cells for measuring the pressing force. Due to massive deployment of sensors in consumer devices, information theft by unconventional means is increasing. The results of the low-cost attacks here developed expose serious shortcomings in the process of security certification of such equipment.

Esta tese apresenta três novos ataques a equipamentos de pagamento eletrônico que possuem teclado mecânico, conhecidos como \"PIN pads\". Mostramos de três formas distintas como tais equipamentos possuem vulnerabilidades de segurança na camada física que permitem o vazamento do PIN (Personal Identification Number) quando o mesmo é digitado. Demonstramos experimentalmente que é possível inferir com elevada taxa de acerto (100% em um dos ataques) a senha digitada, de forma não-invasiva. Os ataques desenvolvidos são baseados na introdução de sensores nos próprios equipamentos ou em seu ambiente de operação: acelerômetros para análise de vibração, microfones para análise acústica e células de carga para medição de forças do pressionamento. Devido à massificação no uso de sensores por dispositivos de consumo, o roubo de informação por meios não convencionais é atividade crescente. Os resultados dos ataques de baixo custo realizados expõem sérias deficiências no processo de certificação de segurança de tais equipamentos. / This thesis presents three new attacks on electronic payment equipment having mechanical keypads, known as \"PIN pads\". We show in three different ways how they have security vulnerabilities at the physical layer allowing the leak of the PIN (Personal Identification Number) when it is entered. We experimentally demonstrated that it is possible to infer with high success rate (100% in one of the attacks) the password entered on the device, in a non-invasive way. The attacks are based on the placement of sensors inside the equipment itself or in its operating environment: accelerometers for doing vibration analysis, microphones for acoustic analysis and load cells for measuring the pressing force. Due to massive deployment of sensors in consumer devices, information theft by unconventional means is increasing. The results of the low-cost attacks here developed expose serious shortcomings in the process of security certification of such equipment.

Electric and magnetic fields in the vicinity of strong sources of radiation (e.g. radar and broadcasting) can exceed the limits mentioned in the national standards for the exposition of persons. Field probes are needed to warn personnel if they are going too close to the RF-sources. For acceptance reasons the field probes should be universal in such a way that no user adjustment of frequency is required. The limits for power density, electric and magnetic field strength depend on the frequency. In contrast, field probes covering a large frequency range, e.g. 1 MHz to 18 GHz or even larger, normally have a flat frequency response. Therefore, the person using the field probe has to know the frequency of the electromagnetic field and to evaluate fieldstrength with respect to the frequency dependent limit value defined by law. Human mistakes while making that evaluation can lead to expositions above the limit value. On the other hand, the evaluation of the power density in the presence of multiple strong sources of radiation at different frequencies with different limit values also leads to measurement problems. A new approach has been undertaken to overcome these difficulties in the development of a rectifying field probe. It consists in shaping the antenna factor of the probe inversely proportional to the limit value. The isotropic response of field probes can be achieved, if three dipole antennas are arranged perpendicular to each other. The presence of dielectric supporting material leads to degradation of the isotropic response of such a field probe. The effect will be investigated. For typical substrates the isotropic response is degraded by up to 3.8 dB. An compensation for this effect will be proposed that leads to a residual unisotropic response of less than 0.2 dB.

Inledning: En distributionskedja fungerar genom att förädla en råvara till färdig produkt genom råvaruleverantörer, producenter, leverantörer, återförsäljare och konsumenter. I den klassiska distributionskedjan är det i regel leverantörerna som hanterar den slutgiltliga förpackningen och står för det varumärke konsumenten ser i butik. Denna marknad har under senare tid upplevt en stor förändring i form av återförsäljarnas egna märkesvaror (EMV). Dessa varor är tillverkade för att vara så lika marknadsledaren som möjligt och står ofta dessutom direkt bredvid dem i butikshyllan. I regel kostar de lite mindre men upplevs ha liknande värde och kvalitet. Marknadsandelarna för dessa egna märkesvaror har de senaste åren ökat stort och förväntas öka ännu mer. Återförsäljarna tillverkar inte dessa egna märkesvaror själva - de produceras av leverantörerna. Då denna marknad är mättad förlorar leverantörerna marknadsandelar då dessa produkter tar plats på marknaden. Denna studie vill gå till botten med hur leverantörerna hanterar denna trend för att fortsätta vara lönsamma och vara en del av distributionskedjan. Syfte: Studien syftar till att utforska leverantörers möjligheter, risker och strategiska beslut i hänseende till en organisations plats och styrka i distributionskedjan. Metod: Detta är en kvalitativ studie som utgår från leverantörens perspektiv. Empirin har samlats in genom semistrukturerade intervjuer med nyckelpersoner hos leverantörsorganisationer som är engagerade i EMV-produktion. Slutsats: EMV erbjuder leverantörerna många möjligheter till tillväxt och utökad konkurrensstyrka, men till en sämre marginal och kostnadsstruktur vilket kan ha förödande konsekvenser. EMV utmanar den klassiska synen på distributionskedjan och konkurrensstrategier. / Introduction: A classic distribution chain consists of a raw material supplier, manufacturer, wholesaler, retailer and consumer. In this chain it's usually the manufacturers that delivers the branded product which ends up in the store shelf. This market has in recent times had a great change in the form of the retailers own brands (PL). These products are made to be similar to the market leader, and they are often placed right next to them on the store shelf. As a rule they have a slightly lower price but the similar quality. These products have risen in popularity and they are expected to rise even more. The retailers however do not manufacture their own products - that is the manufacturer's job. Considering the market is completely mature, this implicates that whenever a new product enters, it does this on the cost of someone else. This study wants to examine how the manufacturers work to keep their place in the distribution chain. Purpose: The purpose of this study is to explore the manufacturer's opportunities, risks and strategic possibilities regarding their place in the distribution chain. Methodology: This is a qualitative study from the suppliers perspective. The data is collected through semi-structured interviews with key personalities from within the organizations who are engaged with private label production. Conclusions: EMV offer the manufacturers many possibilities for growth and strength, but at the cost of lower margins. PL challenges the classic view of the distribution chain and strategies of competition.

Electric and magnetic fields in the vicinity of strong sources of radiation (e.g. radar and broadcasting) can exceed the limits mentioned in the national standards for the exposition of persons. Field probes are needed to warn personnel if they are going too close to the RF-sources. For acceptance reasons the field probes should be universal in such a way that no user adjustment of frequency is required. The limits for power density, electric and magnetic field strength depend on the frequency. In contrast, field probes covering a large frequency range, e.g. 1 MHz to 18 GHz or even larger, normally have a flat frequency response. Therefore, the person using the field probe has to know the frequency of the electromagnetic field and to evaluate fieldstrength with respect to the frequency dependent limit value defined by law. Human mistakes while making that evaluation can lead to expositions above the limit value. On the other hand, the evaluation of the power density in the presence of multiple strong sources of radiation at different frequencies with different limit values also leads to measurement problems. A new approach has been undertaken to overcome these difficulties in the development of a rectifying field probe. It consists in shaping the antenna factor of the probe inversely proportional to the limit value. The isotropic response of field probes can be achieved, if three dipole antennas are arranged perpendicular to each other. The presence of dielectric supporting material leads to degradation of the isotropic response of such a field probe. The effect will be investigated. For typical substrates the isotropic response is degraded by up to 3.8 dB. An compensation for this effect will be proposed that leads to a residual unisotropic response of less than 0.2 dB.

The intentions of the so-called "More Electrical Aircraft" (MEA) are higher efficiency and lower weight. A main topic here is the application of electrical instead of hydraulical, pneumatical and mechanical systems. The necessary power electronic devices have intermediate DC-links, which are typically supplied by a three-phase system with active B6 and passive B12 rectifiers. A possible alternative is the B6 diode bridge in combination with an active power filter (APF). Due to the parallel arrangement, the APF offers a higher power density and is able to compensate for harmonics from several devices. The use of the diode bridge rectifier alone is not permitted due to the highly distorted phase current. The following investigations are dealing with the development of an active power filter for a three-phase supply with variable frequency from 360 to 800 Hz. All relevant components such as inductors, EMC-filters, power modules and DC-link capacitor are designed. A particular focus is put on the customized power module with SiC-MOSFETs and SiC-diodes, which is characterized electrically and thermally. The maximum supply frequency slope has a value of 50 Hz/ms, which requires a high dynamic and robustness on the control algorithm. Furthermore, the content of 5th and 7th harmonics must be reduced to less than 2 %, which demands a high accuracy. To cope with both requirements, a two-stage filter algorithm is developed and implemented in two independent signal processors. Simulations and laboratory experiments confirm the performance and robustness of the control algorithm. This work comprehensively presents the design of aerospace rectifiers. The results were published in conferences and patents. / Hauptziele des sogenannten "More Electrical Aircraft" (MEA) sind Effizienzerhöhung und Gewichtseinsparung. Ein Schwerpunkt hierbei ist die Nutzung von elektrischen statt hydraulischen, pneumatischen und mechanischen Systemen. Die notwendigen Leistungselektroniken haben DC-Zwischenkreise, welche mittels aktiven B6 und passiven B12 Gleichrichtern aus dem Dreiphasennetz gespeist werden. Eine mögliche Alternative ist die B6 Diodenbrücke in Kombination mit einem aktiven Netzfilter, welcher aufgrund der parallelen Anordnung eine höhere Leistungsdichte aufweist und darüber hinaus mehrere Geräte gleichzeitig entstören kann. Die alleinige Nutzung einer Diodenbrücke ist aufgrund des hohen Anteils von Stromharmonischen nicht zulässig. Diese Arbeit beschäftigt sich mit der Entwicklung eines aktiven Filters für ein Dreiphasensystem mit variabler Frequenz von 360 bis 800 Hz. Es werden alle relevanten Bauteile wie Induktivitäten, EMV-Filter, Leistungsmodule und Zwischenkreiskondensator ausgelegt. Besonderes Augenmerk liegt auf dem kundenspezifischen Modul mit SiC-Dioden und SiCMOSFETs, welches vollständig elektrisch und thermisch charakterisiert wird. Die Änderung der Netzfrequenz beträgt bis zu 50 Hz/ms, was eine hohe Dynamik und Robustheit von der Filterregelung verlangt. Weiterhin ist im statischen Fall eine hohe Genauigkeit gefordert, da die 5. und 7. Harmonische auf unter 2% geregelt werden müssen. Um beiden Anforderungen gerecht zu werden, wird ein zweistufiger Regelungsalgorithmus entwickelt der auf zwei digitalen Signalprozessoren implementiert wird. Simulationen und Labormessungen bestätigen die Robustheit des Regelungskonzeptes. Diese Arbeit stellt umfassend die Entwicklung von Luftfahrtgleichrichtern dar. Die Ergebnisse wurden in Konferenzen und Patenten veröffentlicht.

The intentions of the so-called "More Electrical Aircraft" (MEA) are higher efficiency and lower weight. A main topic here is the application of electrical instead of hydraulical, pneumatical and mechanical systems. The necessary power electronic devices have intermediate DC-links, which are typically supplied by a three-phase system with active B6 and passive B12 rectifiers. A possible alternative is the B6 diode bridge in combination with an active power filter (APF). Due to the parallel arrangement, the APF offers a higher power density and is able to compensate for harmonics from several devices. The use of the diode bridge rectifier alone is not permitted due to the highly distorted phase current. The following investigations are dealing with the development of an active power filter for a three-phase supply with variable frequency from 360 to 800 Hz. All relevant components such as inductors, EMC-filters, power modules and DC-link capacitor are designed. A particular focus is put on the customized power module with SiC-MOSFETs and SiC-diodes, which is characterized electrically and thermally. The maximum supply frequency slope has a value of 50 Hz/ms, which requires a high dynamic and robustness on the control algorithm. Furthermore, the content of 5th and 7th harmonics must be reduced to less than 2 %, which demands a high accuracy. To cope with both requirements, a two-stage filter algorithm is developed and implemented in two independent signal processors. Simulations and laboratory experiments confirm the performance and robustness of the control algorithm. This work comprehensively presents the design of aerospace rectifiers. The results were published in conferences and patents. / Hauptziele des sogenannten "More Electrical Aircraft" (MEA) sind Effizienzerhöhung und Gewichtseinsparung. Ein Schwerpunkt hierbei ist die Nutzung von elektrischen statt hydraulischen, pneumatischen und mechanischen Systemen. Die notwendigen Leistungselektroniken haben DC-Zwischenkreise, welche mittels aktiven B6 und passiven B12 Gleichrichtern aus dem Dreiphasennetz gespeist werden. Eine mögliche Alternative ist die B6 Diodenbrücke in Kombination mit einem aktiven Netzfilter, welcher aufgrund der parallelen Anordnung eine höhere Leistungsdichte aufweist und darüber hinaus mehrere Geräte gleichzeitig entstören kann. Die alleinige Nutzung einer Diodenbrücke ist aufgrund des hohen Anteils von Stromharmonischen nicht zulässig. Diese Arbeit beschäftigt sich mit der Entwicklung eines aktiven Filters für ein Dreiphasensystem mit variabler Frequenz von 360 bis 800 Hz. Es werden alle relevanten Bauteile wie Induktivitäten, EMV-Filter, Leistungsmodule und Zwischenkreiskondensator ausgelegt. Besonderes Augenmerk liegt auf dem kundenspezifischen Modul mit SiC-Dioden und SiCMOSFETs, welches vollständig elektrisch und thermisch charakterisiert wird. Die Änderung der Netzfrequenz beträgt bis zu 50 Hz/ms, was eine hohe Dynamik und Robustheit von der Filterregelung verlangt. Weiterhin ist im statischen Fall eine hohe Genauigkeit gefordert, da die 5. und 7. Harmonische auf unter 2% geregelt werden müssen. Um beiden Anforderungen gerecht zu werden, wird ein zweistufiger Regelungsalgorithmus entwickelt der auf zwei digitalen Signalprozessoren implementiert wird. Simulationen und Labormessungen bestätigen die Robustheit des Regelungskonzeptes. Diese Arbeit stellt umfassend die Entwicklung von Luftfahrtgleichrichtern dar. Die Ergebnisse wurden in Konferenzen und Patenten veröffentlicht.