Aim: The aim of this study is to determine the varying levels of salivary statherin production in patients with varying levels of risk for diabetes. The goal is to identify a causal relationship and thus, statherin could be used as a preliminary biomarker for identifying patients with diabetes. Materials and Methods: Saliva from 47 participants were collected in order to quantify the levels of statherin production via western blot analysis. Participants were also asked to fill out self-reported questionnaires regarding risk factors for type 2 diabetes. The questionnaire consisted of 7 questions regarding age, sex, history of diabetes, hypertension, level of physical activity, and weight class. Each individual factor as well as total risk for type two diabetes was compared to levels of salivary statherin levels via the unpaired t-test and one way ANOVA testing. Results: Risk factors for type two diabetes such as; age, sex, history of diabetes, hypertension, level of physical activity, and weight class showed no correlation to levels of salivary statherin secretion. All risk factors combined as a total risk level for type two diabetes also did not show a correlation to levels of salivary statherin secretion. Conclusions: It can be concluded in this study that salivary statherin protein does not show a correlation for risk or status of type two diabetes. Salivary statherin does not act as a useful biomarker for detection of type two diabetes.

Introduction: The aim of this study was to determine the types and prevalence of complications following MARPE protocol at University of the Pacific and to investigate the complication of asymmetry using CBCT analysis. Methods: In the first portion of this study, 97 patients who started treatment prior to July 2020 and who had MARPE expander treatment at the University of the Pacific were included. Chart review and evaluation of progress clinical photographs were used to report the following complications: inflammation, pain, appliance malfunction, broken microscrew, and pulpitis. In the second portion of this study, 77 patients from a private practice orthodontist who started treatment prior to January 2021 were included in this study. The complication of asymmetry was measured using CBCT measurements from T1 (prior to treatment start) and T2 (immediately following MARPE expansion). The change in U6 molar angulation changes was also assessed. Results: It was determined in the first portion of this study that the most common complication was inflammation around the MARPE site, with 82% of the study population exhibiting any severity of inflammation. 3 patients exhibited severe inflammation requiring removal of MARPE. 18% reported pain in the MARPE area. 9 patients exhibited appliance malfunction, 1 patient exhibited broken microscrew, and 1 patient exhibited pulpitis. It was determined in the second portion of this study that 47% of patients exhibited asymmetry greater than 1 mm and the average asymmetry at ANS was 1.47 mm. No correlation was exhibited between amount of asymmetric expansion and the following measures: age, molar inclination, palatal thickness, posterior screw expansion and palatal vault height. 3 Conclusions: Inflammation of the MARPE is the most common complication that can result in early removal of the expander. Other complications such as asymmetry and pain are common as well.

In December 2019, the coronavirus disease 2019 (COVID-19) was first identified as an acute infectious disease in Wuhan, China and subsequently led to an ongoing pandemic. At the onset of the pandemic, dental professionals were understood to face the greatest exposure risk to SARS-Cov-2 due to aerosolization of fluids from the oral cavity and respiratory airways . As a result, dental professionals, including academic institutions and their students and residents halted much of their operations to minimize exposure risks and potentially slow the spread of infection to peers and patients alike. Currently, there is little in the literature that describes the changes that academic institutions have implemented in the face of pandemics. This study will discuss the chronology, modifications, and possible resultant outcomes of COVID-19 related events in respect to Graduate Endodontic programs in the United States.

The aims of this study were to determine the efficacy of the KontrolFlexTM AccufileTM compared to the READY•STEEL™ Flexofile® using an electronic apex locator and to evaluate the instrument’s design via scanning electron microscopy. Actual canal lengths of thirty extracted teeth were determined under magnification. An alginate model was used to determine experimental canal lengths with the Root ZX II apex locator and size #10 Accufiles and Flexofiles. Differences between actual lengths and experimental lengths were compared with Student’s t test. The average experimental lengths were short of the actual length by -0.10 mm (±0.34) and -0.12 mm (±0.16) for the Accufile and Flexofile, respectively with no statistical difference (p > 0.05). SEM images revealed similar non-cutting “batt” tips and a square cross-section for the Accufile and triangular for the Flexofile. Both files provided similarly high levels of reliability when used with the Root ZX II electronic apex locator.

The purpose of this study was to examine the effect of partial and total immersion in sodium hypochlorite on nickel-titanium rotary files and to determine whether resistance to fracture was influenced by the immersion time. One hundred K3™ and 100 ProFile® rotary files were either partially or totally immersed in 5.25% sodium hypochlorite for zero, one, five, thirty, or sixty minutes. After immersion, files were subjected to cyclic fatigue testing. Time to fracture was recorded and analyzed by a two-way ANOVA. Tukey's honest significant difference was used to identify any differences in immersion times. Within all ProFile groups and partial immersion K3 groups, there was no significant decrease in time to fracture with increased immersion time in sodium hypochlorite. Only the K3 total immersion groups revealed a significant decrease in time to fracture with increased immersion time in sodium hypochlorite.

The purpose of this study was to compare three direct digital sensors (Kodak 6100, Schick CDR, and Dexis PerfectSize), a phosphor plate system (OpTime), and F-speed film to standard D-speed film in the detection of artificial bone lesions prepared in mandible bone sections. Multiple artificial bone lesions were prepared at varying depths in the cortical bone. Specimens were imaged with six different radiographic systems. Radiographs were randomly presented to nine different observers. A logistic regression analysis indicated that the ability of the different radiographic systems to detect the bone lesions was significantly different at the mean percentage of cortical bone remaining. The Kodak filtered, Schick filtered, OpTime unfiltered, Schick unfiltered, and Dexis filtered images were significantly better at lesion detection compared to D-speed film. Also, all filtered digital images were significantly better at lesion detection than D-speed film.

Introduction: There are currently no established guidelines to determine which cases general practitioners should refer to an endodontist for root canal treatment. The American Association of Endodontists (AAE) has developed the EndoCase mobile application (ECA), which utilizes either a full or abridged rubric to assign case difficulty level and provide referral guidelines to general practitioners and dental students. Objective: The objective of this study was to determine whether the abridged criteria of the EndoCase application can help predict the incidence of procedural errors in nonsurgical root canal treatment of mandibular molars in an undergraduate dental clinic based on the difficulty level. Methods: A list of patients who received primary root canal treatment on mandibular first molars in the undergraduate dental clinic from 2015-2020 was obtained. Ninety patients qualified for inclusion. Case difficulty level was assessed using the ECA by three providers with differing levels of experience. Incidence of procedural errors was determined from post-operative radiographs by two calibrated independent observers. Results: The most common endodontic mishaps were errors during access cavity preparation followed by the presence of voids in the root filling, with an incidence of 54.4% and 45.6%, respectively. There were no significant differences regarding case difficulty level and the incidence of total procedural errors nor number of treatment visits. Of the individual error types, the presence of obturation >2mm short of the radiographic apex was weakly correlated with case difficulty level (r = 0.226, pConclusion: There is minimal correlation between the difficulty level of mandibular molars determined by the ECA and the number of treatment visits or overall incidence of procedural errors.

Aims Use of 3D printed models in Endodontics has been gaining popularity since the technology to create them became more affordable. Currently, there are no studies that evaluate the influence of 3D models on endodontic surgical treatment planning and on operator confidence. Therefore, aims of this study were to: (i) Determine whether the availability of a 3D printed analogue can influence treatment-planning and operator confidence; and, (ii) Assess which factors of operator confidence are influenced, if any. Materials and Methods Endodontists were asked to analyze a pre-selected CBCT scan of an endodontic surgical case and to answer a questionnaire that determined their surgical approach for that case. After 30 days, the same participants were asked to analyze again the same CBCT scan. This time however, a 3D printed model of the scan was made available to the participants and to perform a mock osteotomy on the model. The participants were then asked to respond to the same questionnaire that they responded to 30 days prior to determine if there would be any changes to their treatment plan. A new set of questions were added to the survey to evaluate the influence of the 3D printed model on participants’ confidence in performing endodontic surgery. The responses were statistically analyzed using Chi square test followed by either logistic or ordered regression analysis while adjusting for experience of participant. Adjustment for multiple comparison analysis was done using Bonferroni correction. Statistical significance was set at £0.005. Results Availability of the 3D printed model and the CBCT scan together resulted in statistically significant differences in the participants’ responses to their ability to clearly detect bone landmarks, accurately predict the location of osteotomy, and in determining the following: size of osteotomy, angle of instrumentation, involvement of critical structures in flap reflection and involvement of vital structures during curettage. In addition, the participants’ confidence in performing surgery was significantly higher versus having CBCT scans alone. There were no statistically significant changes with decisions on flap design and extent, visualizing critical structures, lesion size, injury to vital structures during osteotomy, the length of root that could be resected and the number of roots involved. Conclusions The availability of 3D printed models did not alter the participants’ surgical approach, but it significantly improved their confidence for endodontic microsurgery, which can be attributed to better visualization of anatomical structures.