Thesis (Ph.D.)--Aberdeen University, 2009. / Title from web page (viewed on July 30, 2009). Includes bibliographical references.

The objective of this study is to develop what is called aStudent table, which is designed specifically for school children in emergency circumstances, so it will be suitable for partial solutions for the problems facing children in refugee camps, who are forced to leave their homes and schools. The idea of the study focuses on the creation of the Student table so that the generation of electricity will be suitable for lighting and illumination with the use of some electronic devices used in daily school needs like laptops, so the solar cell system will be connected to a small generator through a hybrid system. A fully functional prototype has been built as part of the study. When the system works through the hybrid route for lighting and illumination the solar system will generate the power needed and when the sun light disappears the Power can be generated by bike pedals. The generation of electricity by the hybrid system is considered as an effective and environmentally friendly option with economic benefits.

Thesis (MTech (Informatics and Design))--Cape Peninsula University of Technology, 2011 / Typically the design of interior environments in the commercial spaces are conceptualised and built to create artificial environments. These environments fail to take into account the amounts of energy used to perpetuate the conditions in the spaces used.The main area of misuse lies in the usage of the interior environmental systems by occupants, which contributes to the inefficiency of these components.

Presently, wireless sensor nodes are widely used and the lifetime of the system is becoming the biggest problem with using this technology. As more and more low power products have been used in WSN, energy harvesting technologies, based on their own characteristics, attract more and more attention in this area. But in order to design high energy efficiency, low cost and nearly perpetual lifetime micro energy harvesting system is still challenging. This thesis proposes a new way, by applying three factors of the system, which are the energy generation, the energy consumption and the power management strategy, into a theoretical model, to optimally design a highly efficient micro energy harvesting system in a real environment. In order to achieve this goal, three aspects of contributions, which are theoretically analysis an energy harvesting system, practically enhancing the system efficiency, and real system implementation, have been made. For the theoretically analysis, the generic architecture and the system design procedure have been proposed to guide system design. Based on the proposed system architecture, the theoretical analytical models of solar and thermal energy harvesting systems have been developed to evaluate the performance of the system before it being designed and implemented. Based on the model's findings, two approaches (MPPT based power conversion circuit and the power management subsystem) have been considered to practically increase the system efficiency. As this research has been funded by the two public projects, two energy harvesting systems (solar and thermal) powered wireless sensor nodes have been developed and implemented in the real environments based on the proposed work, although other energy sources are given passing treatment. The experimental results show that the two systems have been efficiently designed with the optimization of the system parameters by using the simulation model. The further experimental results, tested in the real environments, show that both systems can have nearly perpetual lifetime with high energy efficiency.

Climate change is one of the global challenges of our time. The energy sector is at the focus of the European efforts to combat climate change as it accounts for 80% of the total greenhouse gas emissions in the European Union. Buildings, on the other hand, represent 40% of the energy use and 33% of the total greenhouse gas emissions in the European Union, giving the buildings sector also a key role in the European climate strategy. There are, at the same time, strong interdependencies between the energy and buildings sectors due to the high amount of energy used by buildings and their rising importance as active components in the future energy systems. These interdependencies do not only influence the investment decisions in the energy and buildings sectors, but also the effectiveness of the European climate strategy. Cooperation between the energy and buildings sectors can create beneficial outcomes for the both sectors as well as the environment. It may also encourage innovation, improve the energy performance of buildings, and help achieve a higher penetration of renewable energy into the energy system. This licentiate thesis investigates the relationship between the energy and buildings sector at the inter-company level. Presenting the data collected from interviews and a web survey answered by the energy and buildings sectors in Sweden, this thesis examines the level of cooperation between these two sectors, discusses trust issues between stakeholders, presents the factors that negatively impact cooperation, and provides recommendations for the minimisation of these factors. The findings presented in this thesis indicate an insufficient level of cooperation between the energy and buildings sectors in Sweden, to which the following factors have been identified to contribute in a negative a way: district heating monopolies; energy efficiency in buildings; building regulations; self-generation of electricity; and energy use patterns. The emphasis on self-interest by stakeholders within the both sectors appears to create trust issues between stakeholders. Accordingly, shifting the focus from self-gains to mutual gains is deemed necessary to improve the cooperation between the energy and buildings sectors. This, however requires significant changes in current practices and business models. It has been identified that the development of smart energy systems that allow a closer interaction between the energy and buildings sectors through flexible energy supply and use would minimise many of the factors that negatively impact cooperation. / Klimatförändringen är en av de stora globala utmaningar vi står inför. I Europa läggs idag stort fokus på energisektorn, som står för 80 procent av det totala utsläppen av växthusgaser. Byggnader representerar 40 procent av energianvändningen och 33 procent av växthusutsläppen, vilket också ger byggsektorn en nyckelroll i den europeiska klimatstrategin. Samtidigt finns det starka beroendeförhållanden mellan energi- och byggsektorn på grund av den höga energianvändningen i byggnader och deras ökade betydelse som en aktiv komponent i det framtida energisystemet. Dessa beroendeförhållanden påverkar inte bara investeringsbeslut i de båda sektorerna, utan även effektiviteten i den europeiska klimatstrategin. Samarbete mellan energi- och byggsektorn kan få positiva effekter för både dem själva såväl som för miljön. Samarbete mellan sektorerna kan även uppmuntra innovation, förbättra energieffektiviteten i byggnader och tillåta en högre användning av förnyelsebar energi i energisystemet.  Denna licentiatavhandling utforskar förhållandet mellan energi- och byggsektorn på företagsnivå genom att analysera data som samlats in med hjälp av intervjuer och en webbaserad enkät.  Intervjuer och enkäter har besvarades av både energi- och byggsektorerna i Sverige. Denna avhandling studerar nivån av samarbete mellan de två sektorerna, diskuterar problem gällande förtroende mellan intressenter, presenterar de identifierade faktorer som försvårar samarbete och ger rekommendationer för att minimera dessa. Resultatet visar på en otillräcklig nivå av samarbete mellan energi- och byggsektorerna i Sverige. De faktorer som försvårar samarbetet är följande: fjärrvärmemonopol; energieffektivitet i byggnader; byggregler, egenproduktion av el och användarmönster. Naturligt finns ett egenintresse hos olika intressenter inom de båda sektorerna, och detta tycks ha skapat ett förtroendeproblem mellan de olika sektorerna Att byta fokus från egen vinning till gemensamma mål bedöms vara nödvändigt för att öka samarbetet mellan energi- och byggsektorerna. Detta fodrar dock stora förändringar både i nuvarande verksamhet samt i affärsmodellerna. Det har påvisats att utvecklandet av smarta energisystem som tillåter en större interaktion mellan energi- och byggsektorerna genom flexibel energiförsörjning och användning skulle minimera många av de faktorer som inverkar negativt på samarbetet.

The research described in this dissertation was motivated by the global demand for energy that is not dependent on coal, oil, natural gas and other non-renewable fossil fuels. The technology used in this project is related to the use of biomass to produce a viable alternative to conventional sources of fuel. A bench scale biomass to liquid (BTL) facility was built and tested. This produced results confirming the feasibility of the BTL process. The findings of the pilot study outlined in this dissertation justified the conclusion that the next step will be to expand the capacity and productivity of the BTL pilot plant to an industrial scale. Biomass comes from a variety of renewable sources that are readily available. In this case, the material used in the fixed bed biomass gasification facility to generate wood gas was agricultural and forestry waste, such as straw and wood chips. The gasifier had the capacity to produce up to 10 cubic metres/hr of gas with a carbon monoxide and hydrogen content of between 20–40% by volume, when it was operated at ambient pressure and with air as the oxidizer. The gas, produced at a temperature above 700º C, was cooled in a quench/water scrubber in order to remove most of the mechanical impurities (tars and water-soluble inorganic particles), condensed and dried with corn cobs before being compressed in cylinders at over 100 bar (g) for use in the Fischer-Tropsch Synthesis (FTS). The syngas was subjected further to a series of refining processes which included removal of sulphur and oxygen. The sulphur removal technology chosen entailed applying modified activated carbon to adsorb H2S with the help of hydrolysis in order to convert organic sulphur impurities into H2S which reduced the sulphur content of the gas to less than 5 ppbv. Supported cobalt catalyst (100 grams), were loaded into a single-tube fixed bed FT reactor with an inner diameter of 50 mm. The reactor was fitted with a heating jacket through which, heated oil ran to cool the reactor during a normal reaction occurring at < 250 ºC, while nitrogen was used in the heating jacket during reduction, which occurred at temperatures up ~ 350 ºC. The FTS reaction was carried out at different pressures and temperatures. Liquid and wax products were produced from the facility. The properties of the liquid and solid hydrocarbons produced were found to be the same as FT products from other feed stocks, such as natural gas and coal.

In this master thesis, a methodology is proposed for building stock classification and archetype building development based on deterministic information available in Energy Performance Certificates (EPCs) of existing buildings in the city of Uppsala.This study aims to answer if the EPC database can be used as a reliable data source for archetype development and further UBEM models.The EPC data is cleaned and organised using Matlab. The building stock is then categorised into archetypes by energy performance and building characteristics and a model of each archetype building is created in the software EnergyPlus.The South-West part of Uppsala is used as a case study and to represent the building stock of that area 20 archetypes is developed. Simulations in EnergyPlus shows that the defined archetypes is a reliable estimation of buildings in Sweden with the same characteristics and construction period.By using GIS data the results can be aggregated to city level with the resulting total energy demand for heating calculated to 1455,7 GWh, compared to the actual value of 1397,0 GWh.The lack of validation data on a smaller scale is a large issue for this study, as well as some issues with data reliability in the EPCs. Despite this, the results of this study points to that the gathered values are a decent enough estimate to make a reliable assumption of the total energy demand for heating. The EPCs thus provide a useful source of data for energy demand purposes and building characteristics.

TECNALIA Research &amp; Innovation is the first privately funded applied research centre in Spain and one of the leading such centres in Europe. A renowned technological agent in the development of innovative and sustainable solutions for the energy and environmental challenges of industry and society, TECNALIA addresses the complex challenges of energy supply chain and energy systems. Contributing to these efforts, the project builds a model of the energy system in Basque Country, which is characterized by (1) high representation of industry; the most energy intensive sector (about 45% in the energy demand ) (2) the high consumption of fossil fuels (about 83% of Basque energy use in 2010). These challenges (and others) along with the compliance with EU targets to reduce GHGs emissions, to promote renewables and implement measures for energy savings and efficient use of energy, are key drivers to simulate different policy-based scenarios to study and analyze the impact of these measures over different time frames. The aim of this thesis is prepare energy scenarios for the Basque Country for 2050, taking into account different low-carbon pathways and integrating a life-cycle perspective which includes not only the impact during the use and operation phase of energy systems, but also the impacts during the other life cycle phases (manufacturing, installation, end of life).

No description available.

In order to answer modern challenges, which come from increasing needs in energy forprivate persons and industries as well as in order to decrease negative environmentalimpacts, caused by the processes of energy generation, it is important to constantly searchfor untapped energy efficiency potential. Moreover, nowadays, energy efficiency hasbecome one of the prerequisites of successful market competitiveness for any type ofindustry on local and global levels.An energy audit is an instrument, which can be used for understanding how the energy isused and identify possible energy-saving opportunities. It can be applied to a facility as awhole, as well as individually to equipment, system(s) or process(es). Moreover, energysaving measures can be both cross-cutting and sector-specific.The purpose of this project was to conduct a detailed energy audit of the Hagby wasterecycling plant and to identify beneficial energy saving opportunities from economic,environmental and social perspectives.In the frames of a preliminary energy audit 10 focus areas for further analysis wereidentified. For every area a baseline assessment of the current energy performance wasconducted, possible energy management opportunities were identified and evaluated aswell as results of each analysis were summarized. According to the results of the study, with the implementation of the suggestions, whichrequire no, low or medium investments it is possible to save 3,2% of the energy per year,which corresponds to 76 846 kWh. Energy consumption can further be decreased byimplementing measures, which need high initial financial investment. In that case totalsavings will be 468 846 kWh or 19,4% of total annual energy consumption. Additionalenergy might be saved just by introducing energy housekeeping measures. Finally,implementation of all the proposed EMO can bring 14,46 tons of 2 CO savings annually.Additional benefits of implementing the energy saving opportunities come from decreasingenvironmental impacts, improving working conditions of the plant employees and higherenergy security at the plant.The results of the energy audit can be a solid base for establishing an energy managementprogram at the plant, which will include performance targets, required resources and aclear procedure of realization of improvements. However, since some of the calculations inthe current study are based on various assumptions, after the company forms the energymanagement program, it is necessary to invite experts from industry in order to giveaccurate calculations for each of the focus areas.