This thesis focuses on the concept, design, and simulation of the Reconfigurable Multi-Source Inverter for EV applications and its effectiveness when combined with a HESS. The current trends in the automotive market, including different vehicle types, and the adoption of electrified vehicles by the public are discussed. The benefits and logistics of different vehicle architectures are analyzed and compared. Hybrid vehicles will be essential in helping transition society from conventional internal combustion engine vehicles to purely electric vehicles. The individual components of these electrified vehicles are reviewed, and common topologies are discussed with the benefits of each system compared. The batteries required for these electric vehicles are costly and require many individual cells in order to operate efficiently. Many hybrids vehicles make use of expensive power electronics, such as DC/DC converters to help boost the operating voltage of the battery pack without adding additional cells. A Reconfigurable Multi-Source Inverter in introduced and its switching structure is explained in depth. Its’ ability to make use of multiple DC sources to create four different voltage levels is outlined and possible modulation techniques are presented. This thesis aims to introduce a novel Reconfigurable Multi-Source Inverter using a Space Vector Pulse Width Modulation (SVPWM) scheme and is further investigated through simulations and with plans for experimental validation on an R-L load. / Thesis / Master of Applied Science (MASc) / One of the main factors affecting the cost of electrified vehicles is the expense of building a high voltage battery pack. Motor’s used in electric vehicle applications typically operate at higher voltages and therefore require large battery pack or costly power electronics to step the voltage of the pack up to a suitable operating level. A Reconfigurable Multi-Source Inverter uses a combination of two sources to create different voltage levels. This novel inverter can be used to maximize the voltage of smaller packs to help reduce the overall cost of vehicle electrification.

Technology advancements enable and encourage higher system electrifications in various applications. More electrified applications need more capable and higher performing sources of energy in terms of power delivery, power regeneration, and energy capacity. For example, in electric, hybrid electric, and plug-in hybrid electric vehicle applications (EVs, HEVs, and PHEVs), the power and energy ratings of the vehicle energy storage system (ESS) have a direct impact on the vehicle performance. Many researchers investigated and studied various aspects of hybrid energy storage systems (HESS) wherein multiple ESSs are combined together to share system loads, increase ESS capabilities, and cycle life. Various configurations and their application specific topologies were also proposed by other researchers; the potential of HESS has been proven to be very promising. In this research, the goal is to present the theory of a HESS configuration that has not been discovered thus far. This HESS configuration is called a series-parallel reconfigurable HESS (SPR-HESS) since it is capable of recombining multiple storage systems into different series, parallel, or series-parallel configurations, via power electronic converters, to accommodate different operation modes and load requirements. Simulations, as well as experimental verifications, are presented in this thesis. / Thesis / Doctor of Philosophy (PhD)

In this thesis, a physics-based single particle modeling is presented to analyze a proposed direct coupled hybrid energy storage modules using lithium-ion battery and ultracapacitor. Firstly, a state of the art for the energy storage system in the electrified vehicles are summarized. Several energy storage elements including lead-acid battery, nickel-metal hydride battery, lithium-ion battery, ultracapacitor, and lithium-ion capacitor are reviewed. Requirements of the energy storage systems in electric, hybrid electric, and plug-in hybrid electric vehicles are generalized. Typical hybrid energy storage system topologies are also reviewed. Moreover, these energy storage elements and hybrid energy storage system topologies are compared to the requirements of the energy storage systems in terms of specific power and specific energy. Secondly, the performance of different battery balancing topologies, including line shunting, ring shunting, synchronous flyback, multi-winding, and dissipative shunting are analyzed based on a linear programming methodology. As a traction battery in an electric or plug-in electric vehicle, high voltage lithium-ion packs are typically configured in a modular fashion, therefore, the analysis considers the balancing topologies at module level and cell level and focuses on minimum balancing time, minimum plug-in charge time, minimum energy loss, and component counts of every balancing topology for the entire battery pack. Thirdly, different modeling techniques for the lithium-ion battery and ultracapacitor are presented. One of the main contributions of this thesis is the development of a physics-based single particle modeling embedded with a solid-electrolyte interface growth model for a lithium-ion battery in battery management system. This development considers the numerical solution of diffusion equation, cell level quantities, parametrization method, effects of number of shells in a spherical particle, SOC-SOH estimation algorithms, and aging effects. The accuracy of the modeling is validated by experimental results of a Panasonic NCR18650A lithium-ion battery cell. Fourthly, the physics-based modeling is applied to analyze the performance of a proposed direct coupled hybrid energy storage module topology based on the Panasonic NCR18650A lithium-ion battery and Maxwell BCAP0350 ultracapacitor. There are many ways to directly connect battery cells and ultracapacitor cells in a module which would influence the performance of the module. The results show that a module has 9 cells in a battery string and 14 cells in an ultracapacitor string can obtain the highest power capability and utilize the most of the energy in an ultracapacitor. More ultracapacitor strings connected in parallel would increase the power density but reduce the energy density. Moreover, the simulation and experimental results indicate that the direct coupled hybrid modules can extend the operating range and slow the capacity fade of lithium-ion battery. An SOC-SOH estimation algorithm for the hybrid module is also developed based on the physics-based modeling. Finally, a pack design methodology is proposed to meet U.S. Advanced Battery Consortium LLC PHEV-40, power-assist, and 48V HEV performance targets for the battery packs or the proposed direct coupled topologies. In order to explore replacement tradeoffs between the battery and ultracapacitor, a case study of the direct coupled topologies is presented. From the case study, ultracapacitors enhance the power capability for short term pulse power and marginally reduce the cost of an entire energy storage system. Moreover, the hybrid module topologies can keep a relatively long all-electric range when the batteries degrade. / Dissertation / Doctor of Philosophy (PhD)

Numerous countries are trying to reach almost 100\% renewable penetration. Variable renewable energy (VRE), for instance wind and PV, will be the main provider of the future grid. The efforts to decrease the greenhouse gasses are promising on the current remarkable growth of grid connected photovoltaic (PV) capacity. This thesis provides an overview of the presented techniques, standards and grid interface of the PV systems in distribution and transmission level. This thesis reviews the most-adopted grid codes which required by system operators on large-scale grid connected Photovoltaic systems. The adopted topologies of the converters, the control methodologies for active - reactive power, maximum power point tracking (MPPT), as well as their arrangement in solar farms are studied. The unique L(LCL)2 filter is designed, developed and introduced in this thesis. This study will help researchers and industry users to establish their research based on connection requirements and compare between different existing technologies. Another, major aspect of the work is the development of Virtual Inertia Emulator (VIE) in the combination of hybrid energy storage system addressing major challenges with VRE implementations. Operation of a photovoltaic (PV) generating system under intermittent solar radiation is a challenging task. Furthermore, with high-penetration levels of photovoltaic energy sources being integrated into the current electric power grid, the performance of the conventional synchronous generators is being changed and grid inertial response is deteriorating. From an engineering standpoint, additional technical measures by the grid operators will be done to confirm the increasingly strict supply criteria in the new inverter dominated grid conditions. This dissertation proposes a combined virtual inertia emulator (VIE) and a hybrid battery-supercapacitor-based energy storage system . VIE provides a method which is based on power devices (like inverters), which makes a compatible weak grid for integration of renewable generators of electricity. This method makes the power inverters behave more similar to synchronous machines. Consequently, the synchronous machine properties, which have described the attributes of the grid up to now, will remain active, although after integration of renewable energies. Examples of some of these properties are grid and generator interactions in the function of a remote power dispatch, transients reactions, and the electrical outcomes of a rotating bulk mass. The hybrid energy storage system (HESS) is implemented to smooth the short-term power fluctuations and main reserve that allows renewable electricity generators such as PV to be considered very closely like regular rotating power generators. The objective of utilizing the HESS is to add/subtract power to/from the PV output in order to smooth out the high frequency fluctuations of the PV power, which may occur due to shadows of passing cloud on the PV panels. A control system designed and challenged by providing a solution to reduce short-term PV output variability, stabilizing the DC link voltage and avoiding short term shocks to the battery in terms of capacity and ramp rate capability. Not only could the suggested system overcome the slow response of battery system (including dynamics of battery, controller, and converter operation) by redirecting the power surges to the supercapacitor system, but also enhance the inertial response by emulating the kinetic inertia of synchronous generator.

A method has been developed, Physical Hybrid Model, to investigate the physical large scale electrical effects of a Battery Energy Storage System (BESS) on a distribution grid by scaling the response from a small size Research Development and Demonstration (RD&D) platform. In order to realize the model the control system of an existing RD&D platform was refurbished and stability of components ensured. The Physical Hybrid Model proceeds as follows: Data from a distribution grid are collected. A BESS cycle curve is produced based on analyzed measurements. Required BESS power and capacity in investigated grid is scaled down by factor k to that of the physical test installation of the RD&D platform. The scaled BESS cycle is sent as input to control of the battery cycling of the RD&D platform. The response from the RD&D platform is scaled – up, and used in simulation of the distribution grid to find the impact of a BESS. The model was successfully implemented on a regional distribution grid in southern Sweden.

In this thesis, security measures and vulnerability mitigation are mainly addressed. How to improve the system vulnerability is one of the main issues for power system operation and planning. Recent research revealed that Energy Storage Systems (ESSs) have a great potential to be used to improve system vulnerability. A vulnerability assessment is proposed in this thesis to identify the impact factors in the power systems due to generation outage and line outage. A Bus Impact Severity (BIS) analysis is then proposed and used to find the vulnerable buses in the system. The buses with the larger BIS value defined in this thesis are the better locations for ESSs placement. Formulations for optimal locations and capacities of ESSs placement are derived and then solved by Genetic Algorithm (GA). Test results show that the proposed method can be used to find the optimal locations and capacities for ESSs for system vulnerability improvement.

Power converters are used in many distributed energy resources (DER) applications. With proper controls, DER systems can reduce losses and achieve higher energy efficiency if various power sources and loads are integrated through DC bus. High voltage electric vehicle (EV) DC charging station is becoming popular in order to reduce charging time and improve energy efficiency. A DC EV charging station model involving photovoltaic, energy storage system (ESS), fuel cell and DC loads is studied in this work. A dynamic programming technique that considers various uncertainties involved in the system is adopted to obtain optimal dispatch of ESS and fuel cell system. The effects of different tariffs, demand response programs and contract capacities of demand in the power scheduling are investigated and the results are presented.

This thesis presents the application of a series interconnection module for small distributed generation (DG) or renewable energy systems integration in the distribution network. The concept used one set of voltage source converter (VSC) with battery energy storage system to control the injected voltage magnitude and phase angle for power injection and voltage sag mitigation applications. Through an energy storage device and the VSC, the module allows storage of surplus energy during off peak period and release for use during daytime peak load period, therefore, exhibits a load leveling characteristic. Due to its series connection characteristic, it is convenient in preventing islanding operation and suitable for voltage sag mitigation. The concept is suitable for locations where the voltage phase shift is not a problem. Due to the use of only one set of VSC, it is economic for customer site distributed energy resource applications.

In this thesis, a capacitor semi-active hybrid energy storage system for electric vehicle is proposed. A DC-to-DC bi-directional converter is required to couple the supercapacitor to the system DC bus. Through literature reviews, it was decided that a dual-bridge resonant converter with HF transformer isolation is best suited for the hybrid energy storage application. First, a dual-bridge series resonant converter with capacitive output filter is proposed. Modified gating scheme is applied to the converter instead of the 50% duty cycle gating scheme. Comparing to the 50% duty cycle gating scheme where only four switches work in ZVS, The modified gating scheme allows all eight switches working in ZVS at design point with high load level, and seven switches working in ZVS under other conditions. Next, a dual-bridge LCL-type series resonant converter with capacitive output filter is proposed. Similarly, the modified gating scheme is applied to the converter. This converter shows further improvement in ZVS ability. Operating principles, design examples, simulation results and experimental results of the two newly proposed converters are also presented. In the last part of the thesis, a capacitor semi-active hybrid energy storage system is built to test if the proposed converters are compatible to the system. The dual-bridge LCL-type series resonant converter is placed in parallel to the supercapacitor. The simulation and experimental results of the hybrid energy storage system match closely to the theoretical waveforms. / Graduate

This work presents an experimental and numerical study of phase change behaviour in a horizontal cylindrical latent heat energy storage system (LHESS). Fins with two orientations, straight fins and angled fins, are added into the PCM to enhance heat transfer. The PCM used in this study is lauric acid which has desirable thermal properties for LHESS. The experimental work concentrates on studying the heat transfer mechanism during phase change, impacts of the HTF inlet temperature and HTF flow rates. Moreover, heat transfer enhancement effectiveness of straight fins and angles fins is compared. Numerical model is simulated using COMSOL Multiphysics software package. It is observed that conduction is the dominant heat transfer mechanism during the initial stage of charging, and natural convection plays a more important role afterwards. Conduction plays a major role during solidification. Complete melting time is affected by the HTF inlet temperature and HTF flow rates.