<p>  </p> <p>Globally, communities are embracing the cured-in-place-pipe (CIPP) process due to the need to address damaged buried water and sewer pipes. CIPP involves the chemical manufacture of a new plastic pipe inside an existing buried water and sewer pipe, without the need for excavation. The process is popular because it can be 80% less costly than alternative methods and construction workers can be present for hours to not days to weeks. However, as CIPP use has grown, so have the number of hazardous material (HAZMAT) incidents caused by using this practice. Evacuations of daycare centers, schools, homes, healthcare, institutional, and other buildings have been caused. In some cases, chemical exposure victims have required medical assistance and hospital admission. For decades, organizations within the CIPP industry and municipalities have encouraged chemical waste discharge into ambient air, resulting in preventable exposures. Recent work has indicated tons of volatile organic compounds (VOC) may be released during a single CIPP project into the air. Chemicals released include hazardous air pollutants (HAP), carcinogens (CAR), endocrine disrupting chemicals (EDR), and other compounds with little toxicological information. While polymer composites have been manufactured for other applications for more than 50 years, little information exists about what chemicals and materials are used to manufacture CIPPs. As CIPP use has grown along with the number of bystander chemical exposures, concerns about the type, magnitude, and toxicity of chemical emissions from CIPP projects have markedly increased. To reduce the potential for human harm and environmental degradation, a better understanding of CIPP composite chemistry and manufacturing is needed. This dissertation aimed to elucidate the processes that control the composition of waste generated during plastic CIPP manufacture and ascertain how to modify the manufacturing practice to minimize impacts on composite integrity and emission toxicity. </p> <p>Chapter 1 focused on indoor VOC exposure simulation and styrene contamination/ decontamination to evaluate the risk of occupant exposure during CIPP installation. Styrene is a common monomer used in many CIPP resins and can be discharged into the air at CIPP worksites. A review of prior incidents revealed that CIPP waste (liquid, organic chemicals, etc.) could enter nearby buildings through multiple routes including windows, doors, or heating, ventilation, and air conditioning outdoor air intakes. When CIPP is manufactured inside a sanitary sewer pipe, waste can enter buildings through sewer laterals of nearby buildings and through foundation cracks. Study results showed that plumbing seal backflows in bathrooms caused by sewer repair work are hydraulically possible: the minimum pressure required to displace water in the plumbing trap was estimated to be 0.995 kPa and 8.85 kPa for a sink and toilet, separately. These pressures are much lower than those applied by the contractor during the sewer lining (up to 193.05 kPa). Based on the indoor exposure events, the dissipation potential of vapors, as well as the hydraulic calculations, indoor air chemical contamination and decontamination profiles were also examined. A mass balance model of chemical vapor dispersion was developed. Modeling results revealed that bathroom exhaust fan operation during a CIPP project can increase the indoor styrene concentration by enhancing the inflow of styrene-containing air from the sink and toilet. However, the styrene concentration decreased as air leaked across the bathroom door due to reduced suction in the plumbing. Based on incident reviews, chemical magnitudes, and modeling results it was concluded that CIPP waste discharge should be treated as hazardous material discharge, because of its threat to human health. Actions are needed to reduce waste generation and contain the waste, so it does not leave the worksite. Chapter 2 aimed to determine the manufacturing conditions that most influence chemical residual left in the thermally manufactured CIPP. Bench-scale testing of multiple styrene- and non-styrene composites revealed the manufacturing conditions (curing time, temperature, initiator loading) necessary to produce a high integrity composite while minimizing chemical residual and air emissions. Even though the VOC loading of the non-styrene resin (4 wt.%) was much less than that of styrene resin (39 wt.%), the non-styrene resin did contain HAP, EDR, CAR compounds including ethylbenzene, 2-ethylhexanoic acid, methacrylic acid, styrene, toluene, and <em>m</em>-xylene. Study results also revealed that by changing initiator loading a drastic reduction in the amount of styrene (-42 wt.%) and styrene oxide (-33 wt.%) residual left in the newly manufactured composite was achieved. Discoveries prompted a new hypothesis that this decreased residual also prompted a decreased amount of VOCs emitted into the air. The explanation is that this occurs because that a greater amount of the monomer styrene was incorporated into the resin during polymerization and not permitted to enter the air. Despite decades of polymer composite use, this study provides a new fundamental understanding of composite chemicals and techniques for reducing air pollutant emissions during plastic composite manufacture. In Chapter 3, the complexity of organic vapor chemicals found in the air during thermal heating of CIPP composites was explored and quantified. The emission rate of a popular monomer, styrene, was quantified from the materials before, during, and after composite manufacture. Scaling up bench-scale results, 1.9 to 14 US tons and 0.18 to 1.35 US tons of VOCs (0.05 to 0.36 US tons and 0.001 to 0.007 US tons of styrene) were estimated to be emitted during curing of styrene- and non-styrene CIPPs (i.e., typically 1-3 m of diameter pipes). By modifying standard air sampling methods, previously undetectable chemicals associated with CIPP manufacture were found in the styrene-laden air. These include acetophenone, benzaldehyde, phenol, and 1,3,5-trimethylbenzene. Results have immediate relevance to improved air monitoring for public and worker safety. Further, results can be used to examine the cumulative health and environmental risks of the CIPP pollutant mixtures. Chapter 4 focused on identifying CIPP technology/knowledge gaps and feedback from health officials from multiple state and federal agencies. Through this study, a public health workgroup was assembled to include disciplinary experts and 13 federal, state, and city health agencies and public health associations. Building on dialogue with U.S. health officials, the state of knowledge pertaining to CIPP chemical exposures, mitigation, and response actions was reviewed. Topics included 1) CIPP manufacturing process and waste; 2) sewers and buildings; 3) chemical exposure and health; 4) chemical risk assessment; 5) risk communication. This study helped establish relationships among federal, state, and city officials to improve public health response. Additionally, a primer for CIPP chemical fate and transport, as well as assisting in identifying and prioritizing public health information needs was developed. Identification and prioritization of current public health knowledge gaps and proposed practices for reducing exposures to the public and workers were reported. CIPP-related bench and research results throughout the dissertation can serve as an important basis for environmental policy and public health guidelines on the prevention and mitigation aspects of environmental and human health impacts resulting from CIPP manufacturing practices.</p>

<p>  </p> <p>The pandemic prompted buildings globally to transition to low or no occupancy as social distancing to reduce the spread of Coronavirus Disease (COVID-19). This consequence prompted concerns about the chemical and microbiological safety of building drinking water due to stagnation. At the same time, microplastic (MP) pollution received increasing global attention due to their presence in the environment and recent discoveries within water distribution systems and at building faucets. MP sources have primarily been targeted as originating within the drinking water sources, but plastic plumbing components are less discussed and known to deteriorate into fragments and smaller pieces that reach faucets. Literature at the time of this work as sparse on stagnation impacts to drinking water quality and the fate of MPs in plumbing. In particular, health officials and building owners issued and received many differed guidance documents telling building owners do different things and no standard guideline was available to reduce the health risks caused by stagnant building drinking water. This dissertation  examined three different types of buildings during closed to low water use conditions and conducted bench-scale testing to explore the phenomena observed in the field. Chapter 1 describes water quality impacts during a 7 year old ‘green’ middle school as it transitioned from Summer (low water use) to Fall (normal use). Field experiments revealed that more than half of first draw water samples exceeded the copper (acute) health-based action limit during low water use. Copper concentration within the school increased as distance from building entry point increased. Chapter 2 and 3 describe report on chemical and microbiological water quality in buildings at a university buildings (Chapter 2), and elementary school (Chapter 3). Chapters 2 and 3 revealed that stagnation negatively impacted chemical and microbiological building water quality (cold and hot) but flushing was effective at remediating high concentration of heavy metals and <em>Legionella pneumophila</em> at most locations. But in large buildings, where building plumbing system was more complicated, flushing did not always result in improved water quality. Also discovered was that water quality again deteriorated even after whole building water system was flushed. It is important to understand own building systems to maintain water quality as each building complexity requires specific knowledge and solutions. Chapter 4 describes current knowledge associated with MPs in drinking water and results of bench scale experiments on MP fate and transport in building plumbing. This work identified that while MPs have been reported at building faucets, sampling details lacking from available studies often resulted in study results not being comparable across others. Based on the review of the issue, it was found that MPs have likely reached building faucets for decades but have received no characterization until recently. Bench-scale testing using two MPs, of different density, in copper and crosslinked polyethylene (PEX) pipes revealed size influenced the amount of MPs retained in a pipe. Research needs were identified to determine the fundamental factors that control MP fate in plumbing and their presence at building faucets. </p>

<p>In this work, two overarching global crises are addressed with an engineering lens; the COVID-19 pandemic and climate change. Regarding the latter, an investigation is completed into the fluxes of CO2 in the wake of a simple wind farm for identification of potentially beneficial siting of Direct Capture of CO2. In this analysis, large-eddy simulations are used to quantify scalar entrainment in the turbines’ wake for several empirical CO2 profiles. In instances with positive or a combination of CO2 gradients, it was found that the concentration of CO2 increased in wake through downward mixing and entrainment. In a negative CO2 gradient, the opposite was found, with the wind turbine mixing away the increased surface<br> concentration and entraining down lower concentration air from above. These findings were used to make recommendations on scenarios in which wind turbines were beneficial to Direct Capture plants.<br> In addition, as part of the ongoing response to the COVID-19 pandemic, an innovative new technology was designed and constructed; a prototype photoacoustic spectrometer for the rapid detection of viruses. With the vision to become a viral "breathalyzer", the primary stage of development involved the creation of a prototype for proof-of-concept of viral detection using PAS. An extensive literature review was completed to determine optimal<br> design, with several distinct innovations integrated with the end-product in mind; such as a pure silicon resonator cell and a light-emitting diode source for low-cost, portable detection.<br> This was estimated to be of sufficient quality to detect single virions, as found through Finite Element Analysis.<br> Additionally, the validation of a proposed improvement on the medical mask, named Hy-Cu, is shown. Through various tests, Hy-Cu was found to have greater breathability than KN95 or surgical masks, as well as comparable efficiency in filtration of viral droplets.<br> Additionally, the novel inclusion of a diamond-like carbon-coated copper mesh layer resulted in viral inactivation of 99% after a period of 2 hours, allowing Hy-Cu to be safely reused without risk of transmission.<br> </p> <p> </p>

<p dir="ltr">Aquaculture is a controlled aquatic farming sector and one of the most important human food sources. Fish farming is one of the predominant, fast-growing sectors that supply seafood products worldwide. Along with its benefits, aquaculture practices can discharge large quantities of nutrients into the environment through non-treated or poorly treated wastewater. This study aims to understand the nutrient composition of fish wastewater and the use of indigenous bacteria, cyanobacteria, and microalgae as an alternative biological treatment method. Wastewater samples from a local fish farming facility were collected and treated using six different species of cyanobacteria and microalgae include <i>Chroococcus</i><i> </i><i>minutus</i>, <i>Porphyridium</i><i> </i><i>cruentum</i>, <i>Chlorella vulgaris</i>, <i>Microcystis aeruginosa</i>, <i>Chlamydomonas </i><i>reinhardtii</i>, and <i>Fischerella</i><i> </i><i>muscicola</i>. All the samples were incubated for 21 days, and the following parameters were measured weekly: Chemical oxygen demand (COD), phosphate, total dissolved nitrogen, and dissolved inorganic nitrogen. In addition, dissolved organic nitrogen (DON), bioavailable DON (ABDON), and biodegradable DON (BDON) were calculated from the mass-balance equations. Colorimetric and digestive methods were used for the parameter measurements. The results showed that <i>C. </i><i>reinhardtii</i> reduced the soluble COD concentration by 74.6%, DON by 94.3%, and phosphorous by more than 99%. Moreover, <i>M. aeruginosa</i>, and <i>C. </i><i>minutus</i> significantly reduced inorganic nitrogen species (>99%). This alternative fish wastewater treatment method was explored to gain insight into fish wastewater nutrient composition and to create a sustainable alternative to conventional fish wastewater treatment methods.<b> </b></p>

<p dir="ltr">In our daily lives, we rely on a multitude of discrete products to meet our needs. Traditional product design approaches have primarily focused on economic and technical aspects, often overlooking the pressing environmental and social challenges facing society. Recognizing the limitations of our ecological systems to cope with the waste generated by our current industrial processes, there is a growing need to anticipate the potential consequences of product design across technical, economic, environmental, and social dimensions to pave the way for a sustainable future. One promising strategy within this context is the integration of sustainability principles into optimization-based design models that consider a product's entire life cycle. While there have been previous efforts to optimize product life cycles, a comprehensive exploration of optimization-based design methods with a focus on multiple objectives for discrete products is essential. This dissertation explores the integration of sustainability principles with optimization-based design by taking the electric traction motor used in electric vehicles as a case study. This complex and environmentally significant technology is ideal for investigating the tradeoffs and benefits of incorporating sustainability objectives into the design process.</p><p dir="ltr">The key tasks undertaken in this study are as follows:</p><ul><li>Development of a parametric design and optimization framework for a surface-mounted permanent magnet synchronous motor. In this task, a special emphasis is placed on reducing reliance on materials with a high supply risk, such as rare earth elements.</li><li>Creation of a parametric life cycle assessment model that combines life cycle assessment and optimization-based design to minimize a single-score environmental impact. This model offers insights into the environmental performance of product design and underscores the importance of minimizing environmental impact throughout a product's life cycle.</li><li>Integration of a life cycle costing model, incorporating techno-economic assessment and total cost of ownership perspectives, into the parametric life cycle assessment and optimization-based design models. This model is used to minimize levelized production and driving costs, shedding light on the trade-offs within this family of cost metrics and the optimization of manufacturing systems for motor production.</li><li>Proposal of a circular economy model/algorithm to assess the advantages of integrating the circular economy paradigm during the early design phase. All the mentioned objective functions are considered to study the impacts of applying the circular economy paradigm.</li></ul><p dir="ltr">The contributions of this research can be summarized as follows:</p><ul><li>Utilized a diverse array of analytical methodologies to parameterize the design process of a motor, incorporating the integration of Life Cycle Assessment (LCA) and Techno-Economic Analysis (TEA) models, as well as the incorporation of disassembly planning for informed decision-making in the early stages of design.</li><li>Proposed a generalized objective function denoted as the Supply Risk-equivalent (SR-eq.), aimed at mitigating the risks associated with the dependency on critical materials in product manufacturing.</li><li>Introduced a novel approach for visualizing non-dominated solutions within a multi-objective framework, with experimentation conducted on up to six distinct objectives.</li><li>Substantiated the significance of decarbonizing the electric grid while maintaining competitive cost structures, the importance of advancing non-destructive evaluation (NDE) procedures for assessing the condition of end-of-life (EoL) subassemblies, and optimizing the collection rate of EoL motors.</li></ul><p dir="ltr">Demonstrated that the optimization of technical metrics as surrogate indicators for economic and environmental performance does not necessarily yield designs that are concurrently optimal in economic and environmental terms.</p>