• Refine Query
  • Source
  • Publication year
  • to
  • Language
  • 5
  • Tagged with
  • 5
  • 5
  • 5
  • 5
  • 3
  • 3
  • 3
  • 2
  • 2
  • 2
  • 2
  • 2
  • 2
  • 2
  • 2
  • About
  • The Global ETD Search service is a free service for researchers to find electronic theses and dissertations. This service is provided by the Networked Digital Library of Theses and Dissertations.
    Our metadata is collected from universities around the world. If you manage a university/consortium/country archive and want to be added, details can be found on the NDLTD website.
1

Effect of the cashew nut shell liquid (CNSL) on the rheological properties of the asphalt binder modified with SBS / Efeito do lÃquido da castanha do caju (LCC) nas propriedades reolÃgicas do ligante asfÃltico modificado por SBS

FabÃola Odete Rodrigues 30 August 2010 (has links)
The objective of this study was to modify the asphalt binder (LA) with 50/70 penetration by incorporating SBS (3, 4 and 4.5%) and the cashew nut shell liquid (CNSL) (1% w/w). The studies were directed towards assessing and analyzing the rheological master curves obtained from tests on a dynamic-shear rheometer (DSR). In addition, we assessed the effects of additives in relation to the viscosity, storage stability, and oxidative aging simulated at the RTFOT. The results indicated that the addition of SBS increases the stiffness and the elastic response of the binder at high temperatures. The master curves showed improvements in the rheological parameters at intermediate and high temperatures, where the process of permanent deformation occurs. Samples with SBS contents 3, 4 and 4.5% were tested for storage stability for 48 hours. The sample with 3% SBS showed no phase separation when stored under the conditions investigated, however, samples with 4 and 4.5% of SBS showed phase separation. In these samples (4 and 4.5%), the addition of CNSL embedded in the modified binder by SBS show the potential to estabilize the binder-polymer mixture, avoiding phase separation. The CNSL, therefore, proved to be potentially useful to prevent phase separation of the LAs with the polymer. The results also indicate that the presence of CNSL promoted a reduction in viscosity and flow activation energy of the binder modified by SBS, contributing thus to improve the thermal susceptibility of the modified binder. Tests of resilient modulus (MR) and tensile strength (RT) in asphalt mixtures containing modified binder suggest that the presence of SBS makes the mixture less susceptible to deformation and failure than mixtures with pure LA. However, the asphalt mixture containing the binder modified by SBS with the addition of CNSL presents an even greater hardening when compared to the SBS blend containing no additive. It is likely that the presence of polymerized CNSL has contributed to the hardening of the sample. / O objetivo deste trabalho foi modificar o ligante asfÃltico (LA) com penetraÃÃo 50/70 pela incorporaÃÃo de SBS (3, 4 e 4,5% m/m) e do lÃquido da castanha do caju (LCC) (1% m/m). Os estudos foram dirigidos para avaliaÃÃo dos parÃmetros reolÃgicos e anÃlise das curvas mestras obtidas atravÃs de ensaios realizados em um reÃmetro de cisalhamento dinÃminco (DSR). AlÃm disso, foram avaliados os efeitos da presenÃa dos aditivos em relaÃÃo à viscosidade, estabilidade à estocagem e envelhecimento oxidativo simulado em estufa RTFOT. Os resultados indicaram que a adiÃÃo de SBS aumenta a rigidez e a resposta elÃstica do ligante em altas temperaturas. As curvas mestras mostraram melhorias nos parÃmetros reolÃgicos em temperaturas intermediÃrias e altas, onde ocorre o processo de deformaÃÃo permanente. As amostras com teores de 3, 4 e 4,5% foram testadas quanto à estabilidade a estocagem por 48h. A amostra com teor de 3% SBS nÃo apresentou separaÃÃo de fases quando estocada nas condiÃÃes trabalhadas, no entanto, as amostras com teores de 4 e 4,5% apresentaram separaÃÃo de fases. Nessas amostras (4 e 4,5%), a adiÃÃo do LCC incorporado ao ligante modificado por SBS demonstrou estabilizar a mistura ligante-polÃmero, evitando a separaÃÃo de fases. O LCC, portanto, mostrou-se potencialmente Ãtil para prevenir a separaÃÃo de fases dos LAs modificados com o polÃmero. Os resultados tambÃm indicam que a presenÃa do LCC promoveu uma reduÃÃo na viscosidade e na energia de ativaÃÃo de fluxo do ligante modificado por SBS, contribuindo, portanto, para melhorar a susceptibilidade tÃrmica do ligante modificado. Os ensaios de mÃdulo de resiliÃncia (MR) e reistÃncia a traÃÃo (RT) nas misturas asfÃlticas contendo os ligantes modificados sugerem que a presenÃa do SBS torna a mistura menos susceptÃvel à deformaÃÃo do que as misturas com o LA puro. No entanto, a mistura asfÃltica contendo o ligante modificado por SBS com adiÃÃo de LCC apresenta um endurecimento ainda maior quando comparada a mistura que contÃm o SBS sem o aditivo. à provÃvel que a presenÃa de LCC polimerizado tenha contribuÃdo para o endurecimento da amostra.
2

Polpa de guavira (Campomanesia cambessedeana Berg) desidratada em spray dryer: efeitos das condições de processo e composição da alimentação nas propriedades físico químicas e atividade antioxidante / Guavira (Campomanesia cambessedeana Berg) pulp dehydrated in spray dryer: effects of process conditions and feed composition on the physicochemical properties and antioxidant activity

Chung, Monique Mi Song 04 February 2016 (has links)
O objetivo desse trabalho foi obter polpa de guavira desidratada por atomização, utilizando maltodextrina ou goma arábica como agentes carreadores. Inicialmente, avaliou-se a influência das condições de processo, temperatura do ar de secagem (130, 155 e 180) °C e vazão volumétrica da mistura (20 e 40) mL/min, o tipo e concentração de agente carreador (10 e 20) % nas características físicas, físico-químicas e atividade antioxidante do produto obtido. As propriedades analisadas foram umidade, atividade de água, higroscopicidade, solubilidade, cor, distribuição e tamanho médio de partículas, morfologia, compostos fenólicos totais e atividade antioxidante. A temperatura do ar de secagem e a vazão volumétrica de alimentação influenciaram significativamente todas as propriedades da guavira em pó. A umidade e atividade de água apresentaram os menores valores na temperatura intermediária, independentemente do tipo e concentração do carreador usado. A solubilidade das amostras adicionadas de maltodextrina foram superiores às amostras com goma arábica. O aumento da concentração de agente carreador, em geral, proporcionou um aumento no parâmetro L* e diminuição dos parâmetros a* e b*, tornando as amostras mais claras e reduzindo as tonalidades vermelha e amarela. A guavira em pó apresentou coloração próxima do amarelo e marrom, com grande variação nos parâmetros de cor C* e H* em função das diferentes condições de secagem. A distribuição do tamanho de partículas não teve um padrão definido e o tamanho médio das amostras com maltodextrina foram maiores do que as com goma arábica para a temperatura do ar a 130 °C. No entanto, para as outras temperaturas (155 e 180) °C não houve um comportamento específico do tamanho das partículas em função da vazão de alimentação, tipo e ou concentração de agente carreador. A análise de microscopia eletrônica de varredura permitiu observar que as partículas obtidas tanto com maltodextrina como goma arábica apresentaram formato esférico, superfície rugosa e com adesão de partículas menores nas de maior tamanho, sendo que a superfície das partículas com goma arábica também apresentaram concavidades. A atividade antioxidante foi superior quando utilizada a temperatura de secagem intermediária. A partir das condições selecionadas na primeira etapa (temperatura do ar de 155 °C, vazão volumétrica da mistura de 40 mL/min e 10% de maltodextrina ou goma arábica) a polpa de guavira em pó foi caracterizada quanto a temperatura de transição vítrea, as isotermas de adsorção e a estabilidade à estocagem do ácido ascórbico, compostos fenólicos totais e da atividade antioxidante da polpa de guavira em pó produzida por spray drying ao longo de 120 dias. As temperaturas de transição vítrea foram de (25,2 ± 2,7 °C e 31,4 ± 0,4) °C para os pós produzidos com goma arábica e maltodextrina, respectivamente. O modelo de BET apresentou ajuste muito bom (R2>0,99) para descrever o comportamento de sorção de água das amostras nas temperaturas de (20, 30 e 40) °C. A polpa de guavira em pó produzida com goma arábica apresentou maior adsorção de água do que as amostras obtidas com maltodextrina. No estudo da estabilidade, as amostras foram acondicionadas em embalagem de polietileno laminado e armazenadas a 25 °C e umidade relativa de 75%. A embalagem de polietileno laminado foi eficiente na manutenção do teor de ácido ascórbico e atividade antioxidante da guavira em pó por um período de 120 dias, independente do carreador adicionado. O teor de compostos fenólicos para a guavira em pó com goma arábica apresentou uma redução nos primeiros 22 dias, contudo a amostra com maltodextrina manteve-se estável durante 120 dias de armazenamento. / The aim of this work was to obtain dried guavira pulp by spray drying, using maltodextrin or arabic gum as carrier agents. Initially, it was evaluated the influence of the process conditions, inlet air temperature (130, 155 e 180) °C and mixture feed flow rate (20 e 40) mL/min, carrier agent type and concentration (10 e 20) % in physical, physicochemical properties and antioxidant activity of the product. The analyzed properties were moisture content, water activity, higroscopicity, solubility, distribution and average particle size, morphology, total phenolic compounds and antioxidant activity. The inlet air temperature and mixture feed flow significantly influenced all the properties of guavira powder. The moisture content and water activity showed lower values in intermediate temperature, independent of the carrier agent type and concentration. The solubility of the samples with maltodextrin were higher than the samples with arabic gum. Increasing the carrier agent concentration generally resulted in an increase of the parameter L* and a reduction of a* and b* parameters, making lighter samples and reducing the red and yellow hues. The color of the guavira powder presented next to yellow and brown coloring, with great variation in parameters C* and H* depending on the different drying conditions. The size distribution of the particles had no definite pattern and the particles average size of the samples with maltodextrin were higher the samples with arabic gum for the inlet air temperature at 130 °C. However, for the other temperatures (155 and 180) °C there is a specific behavior of the particle size depending of the feed flow rate, carrier agent type and concentration. The scanning electronic microscopic analysis observed that the particles obtained with maltodextrin or arabic gum presented spherical, roughness surface and adhesion of the smaller particles into larger, the particles with arabic gum also presented concavities. The antioxidant activity was higher at intermediate inlet air temperature. From the selected conditions at the first phase (inlet air temperature of 155 °C, feed flow rate of 40 mL/min and 10% of maltodextrina or arabic gum) the guavira pulp powder were evaluated the glass transition temperature, the adsorption isotherms and the storage stability of ascorbic acid and antioxidant activity of the guavira powder produced to over 120 days. The glass transition temperatures were (25,2 ± 2,7 °C e 31,4 ± 0,4) °C for the powder obtained with arabic gum and maltodextrin, respectively. The BET model presented good adjustment (R²>0,99) to describe the water sorption behavior of the samples at test temperatures of (20, 30 e 40) °C. The guavira powder with arabic gum showed higher water adsorption than the samples with maltodextrin. In the stability study, samples were packed in polyethylene-laminated packaging and stored at 25 °C and relative humidity of 75%. The packaging was effective in maintaining ascorbic acid and antioxidant activity of the guavira powder for a period of 120 days for samples with the addition of maltodextrin and gum arabic. The content of phenolic compounds for guavira powder with gum arabic showed a reduction in the first 22 days, but the sample with maltodextrin remained stable for 120 days of storage.
3

Polpa de guavira (Campomanesia cambessedeana Berg) desidratada em spray dryer: efeitos das condições de processo e composição da alimentação nas propriedades físico químicas e atividade antioxidante / Guavira (Campomanesia cambessedeana Berg) pulp dehydrated in spray dryer: effects of process conditions and feed composition on the physicochemical properties and antioxidant activity

Monique Mi Song Chung 04 February 2016 (has links)
O objetivo desse trabalho foi obter polpa de guavira desidratada por atomização, utilizando maltodextrina ou goma arábica como agentes carreadores. Inicialmente, avaliou-se a influência das condições de processo, temperatura do ar de secagem (130, 155 e 180) °C e vazão volumétrica da mistura (20 e 40) mL/min, o tipo e concentração de agente carreador (10 e 20) % nas características físicas, físico-químicas e atividade antioxidante do produto obtido. As propriedades analisadas foram umidade, atividade de água, higroscopicidade, solubilidade, cor, distribuição e tamanho médio de partículas, morfologia, compostos fenólicos totais e atividade antioxidante. A temperatura do ar de secagem e a vazão volumétrica de alimentação influenciaram significativamente todas as propriedades da guavira em pó. A umidade e atividade de água apresentaram os menores valores na temperatura intermediária, independentemente do tipo e concentração do carreador usado. A solubilidade das amostras adicionadas de maltodextrina foram superiores às amostras com goma arábica. O aumento da concentração de agente carreador, em geral, proporcionou um aumento no parâmetro L* e diminuição dos parâmetros a* e b*, tornando as amostras mais claras e reduzindo as tonalidades vermelha e amarela. A guavira em pó apresentou coloração próxima do amarelo e marrom, com grande variação nos parâmetros de cor C* e H* em função das diferentes condições de secagem. A distribuição do tamanho de partículas não teve um padrão definido e o tamanho médio das amostras com maltodextrina foram maiores do que as com goma arábica para a temperatura do ar a 130 °C. No entanto, para as outras temperaturas (155 e 180) °C não houve um comportamento específico do tamanho das partículas em função da vazão de alimentação, tipo e ou concentração de agente carreador. A análise de microscopia eletrônica de varredura permitiu observar que as partículas obtidas tanto com maltodextrina como goma arábica apresentaram formato esférico, superfície rugosa e com adesão de partículas menores nas de maior tamanho, sendo que a superfície das partículas com goma arábica também apresentaram concavidades. A atividade antioxidante foi superior quando utilizada a temperatura de secagem intermediária. A partir das condições selecionadas na primeira etapa (temperatura do ar de 155 °C, vazão volumétrica da mistura de 40 mL/min e 10% de maltodextrina ou goma arábica) a polpa de guavira em pó foi caracterizada quanto a temperatura de transição vítrea, as isotermas de adsorção e a estabilidade à estocagem do ácido ascórbico, compostos fenólicos totais e da atividade antioxidante da polpa de guavira em pó produzida por spray drying ao longo de 120 dias. As temperaturas de transição vítrea foram de (25,2 ± 2,7 °C e 31,4 ± 0,4) °C para os pós produzidos com goma arábica e maltodextrina, respectivamente. O modelo de BET apresentou ajuste muito bom (R2>0,99) para descrever o comportamento de sorção de água das amostras nas temperaturas de (20, 30 e 40) °C. A polpa de guavira em pó produzida com goma arábica apresentou maior adsorção de água do que as amostras obtidas com maltodextrina. No estudo da estabilidade, as amostras foram acondicionadas em embalagem de polietileno laminado e armazenadas a 25 °C e umidade relativa de 75%. A embalagem de polietileno laminado foi eficiente na manutenção do teor de ácido ascórbico e atividade antioxidante da guavira em pó por um período de 120 dias, independente do carreador adicionado. O teor de compostos fenólicos para a guavira em pó com goma arábica apresentou uma redução nos primeiros 22 dias, contudo a amostra com maltodextrina manteve-se estável durante 120 dias de armazenamento. / The aim of this work was to obtain dried guavira pulp by spray drying, using maltodextrin or arabic gum as carrier agents. Initially, it was evaluated the influence of the process conditions, inlet air temperature (130, 155 e 180) °C and mixture feed flow rate (20 e 40) mL/min, carrier agent type and concentration (10 e 20) % in physical, physicochemical properties and antioxidant activity of the product. The analyzed properties were moisture content, water activity, higroscopicity, solubility, distribution and average particle size, morphology, total phenolic compounds and antioxidant activity. The inlet air temperature and mixture feed flow significantly influenced all the properties of guavira powder. The moisture content and water activity showed lower values in intermediate temperature, independent of the carrier agent type and concentration. The solubility of the samples with maltodextrin were higher than the samples with arabic gum. Increasing the carrier agent concentration generally resulted in an increase of the parameter L* and a reduction of a* and b* parameters, making lighter samples and reducing the red and yellow hues. The color of the guavira powder presented next to yellow and brown coloring, with great variation in parameters C* and H* depending on the different drying conditions. The size distribution of the particles had no definite pattern and the particles average size of the samples with maltodextrin were higher the samples with arabic gum for the inlet air temperature at 130 °C. However, for the other temperatures (155 and 180) °C there is a specific behavior of the particle size depending of the feed flow rate, carrier agent type and concentration. The scanning electronic microscopic analysis observed that the particles obtained with maltodextrin or arabic gum presented spherical, roughness surface and adhesion of the smaller particles into larger, the particles with arabic gum also presented concavities. The antioxidant activity was higher at intermediate inlet air temperature. From the selected conditions at the first phase (inlet air temperature of 155 °C, feed flow rate of 40 mL/min and 10% of maltodextrina or arabic gum) the guavira pulp powder were evaluated the glass transition temperature, the adsorption isotherms and the storage stability of ascorbic acid and antioxidant activity of the guavira powder produced to over 120 days. The glass transition temperatures were (25,2 ± 2,7 °C e 31,4 ± 0,4) °C for the powder obtained with arabic gum and maltodextrin, respectively. The BET model presented good adjustment (R²>0,99) to describe the water sorption behavior of the samples at test temperatures of (20, 30 e 40) °C. The guavira powder with arabic gum showed higher water adsorption than the samples with maltodextrin. In the stability study, samples were packed in polyethylene-laminated packaging and stored at 25 °C and relative humidity of 75%. The packaging was effective in maintaining ascorbic acid and antioxidant activity of the guavira powder for a period of 120 days for samples with the addition of maltodextrin and gum arabic. The content of phenolic compounds for guavira powder with gum arabic showed a reduction in the first 22 days, but the sample with maltodextrin remained stable for 120 days of storage.
4

Avaliação do uso de um polietileno de alta densidade e baixo peso molecular oxidado como agente de compatibilização em asfalto modificado com copolímero SBS / Analysis of the use of an oxidized, high-density polyethylene with low molecular weight as a compatibilizing agent in asphalt binders modified with SBS copolymer

Verdade, Lucas Lauer 26 August 2015 (has links)
O copolímero SBS é o aditivo mais empregado mundialmente na modificação de ligantes asfálticos, por melhorar diversas de suas características. Um dos principais problemas deste tipo de formulação é a separação de fases, que pode ser minimizada com a incorporação de aditivos. Um novo polietileno de alta densidade e baixo peso molecular oxidado (com denominação comercial TITAN 9686) foi utilizado nesta pesquisa, com o objetivo de testar a hipótese de que a adição de proporções adequadas deste aditivo possa melhorar as características reológicas do asfalto+SBS. O experimento laboratorial foi delineado com base na técnica de experimentos com misturas, englobando um total de nove formulações compostas com asfalto, SBS e TITAN. O teor de SBS variou entre 0 e 5% em peso e o de polietileno variou entre 0 e 2% em peso. Foi utilizado óleo aromático no teor de 4% em peso para todas as nove misturas. As misturas foram analisadas em três condições de envelhecimento: virgem, curto prazo (na estufa RTFO) e longo prazo (na estufa PAV). Foram realizados os seguintes ensaios reológicos: (i) de cisalhamento em regime oscilatório em diferentes condições de temperatura e frequência (para medida do módulo complexo e do ângulo de fase, usados na determinação do grau de desempenho, no cálculo dos parâmetros G*/sen(δ) e G*.sen(δ) e na construção de curvas-mestre), (ii) de viscosidade Brookfield, (iii) de fluência e recuperação sob múltiplas tensões (para medida do percentual de recuperação e da compliância não-recuperável), (iv) de varredura de amplitude linear (para cálculo do parâmetro a f e para ajuste do modelo de fadiga) e (v) de estabilidade à estocagem. Acerca das características escolhidas para mensurar a melhora ou piora das propriedades das misturas asfalto+SBS com a adição de TITAN, podem ser feitas as seguintes observações: (i) a estabilidade à estocagem é melhorada com a adição de TITAN, em particular no teores entre 1 e 2%; (ii) a sensibilidade ao envelhecimento tanto a curto quanto a longo prazos diminui com a adição de TITAN; (iii) a adição de TITAN aumenta a resistência à deformação permanente, à luz dos parâmetros Jnr e R e aumenta a sensibilidade dos ligantes asfálticos modificados com SBS a mudanças bruscas nos níveis de tensão aplicados; e (iv) a adição de TITAN contribui com o aumento da resistência à fadiga, à luz dos parâmetros Nf , a baixos níveis de deformação, e af , e a prejudica reduzindo o parâmetro Nf a altos níveis de deformação e aumentando a temperatura crítica de fadiga ou o parâmetro G*.sen(δ). Tendo por base estas evidências, é possível concluir que a adição de TITAN, em linhas gerais, melhorou a estabilidade dos ligantes asfálticos modificados com até 5,0% de SBS. Com base nas análises realizadas, é possível afirmar que teores da ordem de 1 a 2% de TITAN, para teores de SBS entre 3,0 e 5,0%, são recomendáveis, à luz das propriedades, índices e parâmetros analisados neste trabalho. / The SBS copolymer is the most widely used additive in asphalt binder modification, since it enhances many of the properties of the original material. A critical problem that arises from this type of modification is phase separation, which can be minimized by adding other modifiers to the formulation. A new oxidized, high-density polyethylene with low molecular weight (commercial designation of \"TITAN 9686\") was used in the study with the purpose of verifying the hypothesis that the addition of suitable contents of this modifier can improve the rheological properties of the SBS-modified binder. The laboratory matrix of formulations was based on the experiments with mixtures, and nine types of materials were prepared with asphalt binder, SBS and TITAN. The SBS contents ranged from 0 to 5% by weight, whereas the polyethylene contents ranged from 0 to 2% by weight. These formulations also contained 4% of aromatic oil by weight. Three aging conditions were selected: unaged, short-term aged in the rolling thin-film oven (RTFO) and long-term aged in the pressurized aging vessel (PAV). The following tests were carried out: (i) dynamic oscillatory shear at different temperatures and frequencies of loading for the determination of the complex modulus, the phase angles and the master curves, as well as the performance grades and the numerical values of the parameters G*/sin(δ) and G*.sen(δ); (ii) rotational viscosity; (iii) creep and recovery at multiple stress levels for the determination and the percent recovery and the nonrecoverable compliance; (iv) linear amplitude sweep, in order to calculate the parameter a f and fit the fatigue model to the data; and (v) storage stability. With respect to the characteristics used in the evaluation of the properties of the AC+SBS mixtures after the addition of TITAN, the following observations can be made: (i) storage stability is improved when TITAN is added to the formulation, especially at contents ranging from 1 to 2%; (ii) the sensitivity to the short-term and long-term aging processes decreased with the incorporation of TITAN; (iii) the changes in the R and the Jnr values indicate that the addition of TITAN makes the asphalt binder more resistant to rutting, and also increases the sensitivity of the SBS-modified binders to sudden increases in the stress level; and (iv) the presence of TITAN in the material leads to an increase in the fatigue resistance as based on the parameters Nf and af at low strain levels and the increases in the critical fatigue temperature and the parameter G*.sen(δ). With reference to these evidences, it is possible to conclude that the addition of TITAN generally improves the storage stability of the SBS-modified binders with no more than 5% of copolymer by weight. Based on the results of the present study, it is possible to say that percentages between 1 and 2% of TITAN by weight are recommended for SBS contents between 3 and 5% by weight.
5

Avaliação do uso de um polietileno de alta densidade e baixo peso molecular oxidado como agente de compatibilização em asfalto modificado com copolímero SBS / Analysis of the use of an oxidized, high-density polyethylene with low molecular weight as a compatibilizing agent in asphalt binders modified with SBS copolymer

Lucas Lauer Verdade 26 August 2015 (has links)
O copolímero SBS é o aditivo mais empregado mundialmente na modificação de ligantes asfálticos, por melhorar diversas de suas características. Um dos principais problemas deste tipo de formulação é a separação de fases, que pode ser minimizada com a incorporação de aditivos. Um novo polietileno de alta densidade e baixo peso molecular oxidado (com denominação comercial TITAN 9686) foi utilizado nesta pesquisa, com o objetivo de testar a hipótese de que a adição de proporções adequadas deste aditivo possa melhorar as características reológicas do asfalto+SBS. O experimento laboratorial foi delineado com base na técnica de experimentos com misturas, englobando um total de nove formulações compostas com asfalto, SBS e TITAN. O teor de SBS variou entre 0 e 5% em peso e o de polietileno variou entre 0 e 2% em peso. Foi utilizado óleo aromático no teor de 4% em peso para todas as nove misturas. As misturas foram analisadas em três condições de envelhecimento: virgem, curto prazo (na estufa RTFO) e longo prazo (na estufa PAV). Foram realizados os seguintes ensaios reológicos: (i) de cisalhamento em regime oscilatório em diferentes condições de temperatura e frequência (para medida do módulo complexo e do ângulo de fase, usados na determinação do grau de desempenho, no cálculo dos parâmetros G*/sen(δ) e G*.sen(δ) e na construção de curvas-mestre), (ii) de viscosidade Brookfield, (iii) de fluência e recuperação sob múltiplas tensões (para medida do percentual de recuperação e da compliância não-recuperável), (iv) de varredura de amplitude linear (para cálculo do parâmetro a f e para ajuste do modelo de fadiga) e (v) de estabilidade à estocagem. Acerca das características escolhidas para mensurar a melhora ou piora das propriedades das misturas asfalto+SBS com a adição de TITAN, podem ser feitas as seguintes observações: (i) a estabilidade à estocagem é melhorada com a adição de TITAN, em particular no teores entre 1 e 2%; (ii) a sensibilidade ao envelhecimento tanto a curto quanto a longo prazos diminui com a adição de TITAN; (iii) a adição de TITAN aumenta a resistência à deformação permanente, à luz dos parâmetros Jnr e R e aumenta a sensibilidade dos ligantes asfálticos modificados com SBS a mudanças bruscas nos níveis de tensão aplicados; e (iv) a adição de TITAN contribui com o aumento da resistência à fadiga, à luz dos parâmetros Nf , a baixos níveis de deformação, e af , e a prejudica reduzindo o parâmetro Nf a altos níveis de deformação e aumentando a temperatura crítica de fadiga ou o parâmetro G*.sen(δ). Tendo por base estas evidências, é possível concluir que a adição de TITAN, em linhas gerais, melhorou a estabilidade dos ligantes asfálticos modificados com até 5,0% de SBS. Com base nas análises realizadas, é possível afirmar que teores da ordem de 1 a 2% de TITAN, para teores de SBS entre 3,0 e 5,0%, são recomendáveis, à luz das propriedades, índices e parâmetros analisados neste trabalho. / The SBS copolymer is the most widely used additive in asphalt binder modification, since it enhances many of the properties of the original material. A critical problem that arises from this type of modification is phase separation, which can be minimized by adding other modifiers to the formulation. A new oxidized, high-density polyethylene with low molecular weight (commercial designation of \"TITAN 9686\") was used in the study with the purpose of verifying the hypothesis that the addition of suitable contents of this modifier can improve the rheological properties of the SBS-modified binder. The laboratory matrix of formulations was based on the experiments with mixtures, and nine types of materials were prepared with asphalt binder, SBS and TITAN. The SBS contents ranged from 0 to 5% by weight, whereas the polyethylene contents ranged from 0 to 2% by weight. These formulations also contained 4% of aromatic oil by weight. Three aging conditions were selected: unaged, short-term aged in the rolling thin-film oven (RTFO) and long-term aged in the pressurized aging vessel (PAV). The following tests were carried out: (i) dynamic oscillatory shear at different temperatures and frequencies of loading for the determination of the complex modulus, the phase angles and the master curves, as well as the performance grades and the numerical values of the parameters G*/sin(δ) and G*.sen(δ); (ii) rotational viscosity; (iii) creep and recovery at multiple stress levels for the determination and the percent recovery and the nonrecoverable compliance; (iv) linear amplitude sweep, in order to calculate the parameter a f and fit the fatigue model to the data; and (v) storage stability. With respect to the characteristics used in the evaluation of the properties of the AC+SBS mixtures after the addition of TITAN, the following observations can be made: (i) storage stability is improved when TITAN is added to the formulation, especially at contents ranging from 1 to 2%; (ii) the sensitivity to the short-term and long-term aging processes decreased with the incorporation of TITAN; (iii) the changes in the R and the Jnr values indicate that the addition of TITAN makes the asphalt binder more resistant to rutting, and also increases the sensitivity of the SBS-modified binders to sudden increases in the stress level; and (iv) the presence of TITAN in the material leads to an increase in the fatigue resistance as based on the parameters Nf and af at low strain levels and the increases in the critical fatigue temperature and the parameter G*.sen(δ). With reference to these evidences, it is possible to conclude that the addition of TITAN generally improves the storage stability of the SBS-modified binders with no more than 5% of copolymer by weight. Based on the results of the present study, it is possible to say that percentages between 1 and 2% of TITAN by weight are recommended for SBS contents between 3 and 5% by weight.

Page generated in 0.0967 seconds