京都大学 / 新制・課程博士 / 博士(工学) / 甲第24148号 / 工博第5035号 / 新制||工||1786(附属図書館) / 京都大学大学院工学研究科合成・生物化学専攻 / (主査)教授 杉野目 道紀, 教授 大江 浩一, 教授 中尾 佳亮 / 学位規則第4条第1項該当 / Doctor of Philosophy (Engineering) / Kyoto University / DGAM

No description available.

No description available.

No description available.

No description available.

No description available.

No description available.

Poly(arylene ether phosphine oxide)s (PEPO) are a recently identified subset of an important macromolecular series which includes industrially important high performance thermoplastics, such as the polysulfones, e.g. UDEL@ and polyether ketones, e.g. PEEK@, PEKK@, etc. The PEPO materials show an elevated glass transition temperature, high thermal and oxidative stability, improved solubility, and increased flame resistance. It has been demonstrated that a variety of metal salts including metals such as iron, zinc, cobalt, and copper, can be complexed at a molecular level with the phosphoryl group in films of these polymers producing novel transparent metal/polymer "composites". A procedure for obtaining homogeneous films from solutions of the metal halide complexed polymers has been developed. FTIR experiments as well as Tl phosphorus (31 P) NMR measurements were conducted to demonstrate the existance of metal complexation in the solid state. The effect of the chemical composition of the chain, type of metal salt, molar concentration of the metal salt, and heating cycle were investigated and found to influence properties of the films such as solubility, glass transition temperature, thermal stability, and storage mexiulus. Additionally, linear poly(arylene ether phosphine oxide)s were reduced to different extents to the corresponding phosphine containing polymers. Properties such as intrinsic One of these phosphine polymers was subsequently used in the generation of a rhodium catalyst for the hydroformylation of octene-l. The utilization of polymer-supported catalysts has important advantages such as catalyst recovery and the ease of separation of the product. The catalyst activity of the polymeric rhodium complex was studied as a function of reaction time as well as ligand to rhodium ratio. For a phosphorus/rhodium ratio of two these heterogeneous catalysts suffer in tenns of reaction rate in relation to their homogeneous counterparts. However, at phosphorus/rhodium ratios of approximately eight the reaction is almost quantitative after three hours, and the selectivity is greatly improved over that of monomeric homogeneous catalysts for the same P/Rh ratio. / Master of Science

Chemical modification of naturally occurring cellulose into ester and ether derivatives has been of growing interest due to inexhaustible cellulose resources, and to excellent properties and extremely broad applications of these derivatives. However, traditional esterification and etherification involve relatively harsh conditions (strongly acidic or strongly alkaline), greatly limiting the content and range of functional groups that may be installed onto the cellulose backbone. Amorphous solid dispersion (ASD) is an effective method to promote oral delivery of poorly-soluble drugs by dispersing crystalline drugs in a polymer matrix, creating drug supersaturation upon release. Cellulose 𝜔-carboxyesters have been proven to be effective ASD matrices for many different drugs; however, synthesis of such polymers involves protecting-deprotecting chemistry and one synthetic route only leads to one structure. Developing a new generation of cellulosic polymers for oral drug delivery such as ASD matrices requires new synthetic techniques and powerful tools. Olefin cross-metathesis (CM) is a mild, efficient and modular chemistry with extensive applications in organic, polymer, and polysaccharide chemistry. Successful CM can be achieved by appending olefin “handles” from cellulose esters and reacting with electron-deficient olefins like acrylic acid. Cellulose ethers have much better hydrolytic stability compared to esters and are also commercially very important. The overarching theme of this dissertation is to investigate modification of cellulose ether derivatives, and to design and synthesize effective ASD polymers by olefin CM. We first validated the strategy of performing CM by appending metathesis “handles” through etherification and then subjected these terminal olefins to various partners (acrylic acid and different acrylates). After demonstration of the concept, we applied different starting materials (e.g. ethyl cellulose, methyl cellulose, microcrystalline cellulose, and hydroxypropyl cellulose) with distinctive hydrophobicity/hydrophilicity balance. Furthermore, α,β-unsaturated CM products tended to undergo radical crosslinking through abstraction of 𝛾-protons and recombination of polymer radicals. In order to resolve this issue, we first applied post-CM hydrogenation and then explored a thiol-Michael addition to the α,β-unsaturation, which also incorporates an extra functional group through the thioether. We have successfully prepared a collection of cellulose 𝜔-carboxyether derivatives through the above-mentioned method and preliminary drug induction experiments also revealed that these derivatives hold high promise for ASD application. We also explored the possibility of conducting CM in a reverse order: i.e. appending electron-deficient acrylate groups to the polymer, then subjecting it to electron-rich small molecule terminal olefins. The failure of this metathesis approach was speculated to be due mainly to low acrylate reactivity on an already crowded polymer backbone and the high reactivity of rapidly diffusing, small molecule terminal olefins. Last but not least, we further utilized olefin CM to conjugate bile salt derivatives (e.g. lithocholic acid and deoxycholic acid) to a cellulose backbone by converting bile salts into acrylate substrates. Successful CM of bile salt acrylates to cellulose olefin “handles” further demonstrated the great versatility, excellent tolerance, and very broad applicability of this strategy. Overall, we have founded the strategy for performing successful olefin CM in many cellulose ether derivatives with acrylic acid and a variety of different acrylates. Post-CM hydrogenation efficiently removes the α,β-unsaturation and provides stable and effective cellulose 𝜔-carboxyether derivatives for ASD application. Tandem CM/thiol-Michael addition not only eliminates the crosslinking tendency but also enables an even broader library of polymer structures and architectures for structure-property investigations. We anticipate these methods can be readily adapted by polysaccharide chemists and applied with numerous complex structures, which would greatly broaden the range of cellulose and other polysaccharide derivatives for applications including ASDs, P-glycoprotein inhibition, antimicrobial, coating, and other biomedical applications. / Ph. D.

Due in large part to the growth and development of reliable surface characterization techniques, as well as to advances in the physical and chemical techniques used to modify surfaces, the technology of surface modification has seen rapid expansion over the past two decades. A major thrust of this research is the growth of controlled/"living" polymeric brushes from the surface of various substrates, an advance that promises to be a facile and reproducible way of altering surface properties. A unique initiator bearing ATRP (atom transfer radical polymerization), cleavage, and condensation functionalities was prepared and attached to the hydrolyzed surface of silica gel. Preliminary results indicate that control of reversibly terminated grafts of varying degrees of polymerization with polydispersity indices approaching 1.5 can be readily achieved-significant findings in the quest to design desired surface characteristics. Important physical characteristics may also be altered by way of varying molecular topologies. In the second major research thrust, the use of self-assembly to construct such topologies in the form of pseudorotaxanes fashioned from diverse macrocycles with multifarious guest ions is discussed. While the underlying goal was to investigate and understand the mode of complexation based on such environmental factors as substituent affects and neighboring group influences, new insight was gained on the synthetic manipulation of cooperative events-events that freely occur in nature. The complexation behavior of several functionalized bis-(meta-phenylene)-32-crown-10 macrocycles with various paraquat guest moieties was. As expected, studies indicated that electron-donating substituents on the crown ether drive association, a likely result of increased p -p interactions among host and guest species. The association between a bicyclic macrocycle and dimethyl paraquat was also investigated. Not surprisingly, binding of paraquat by the bicyclic was much stronger than the binding found in analogous macrocycles. Lastly, the endgroup functionalization of poly(propyleneimine) dendrimers with two crown ether macrocycles was performed and the complexation with host-specific guests studied. Curiously, two extreme binding regimes were found: the larger 32-membered crown ether assembly displayed anti-cooperative behavior upon complexation with paraquat, while the smaller 24-membered macrocyclic system exhibited cooperative effects with 2o ammonium ions. These cooperative results are among the very first described for non-biological systems and hint at their potential use in developing highly efficient, synthetically designed supramolecular systems. / Master of Science