Abstract Background The organisations actions are continuing to be disconnected from Earth system research and to what level organisations have an impact, if all to minimize risk of collapse of Earth systems are unknown (Whiteman etl al 2013) this is the problem this paper is seeking to address. By connecting organizations sustainability work with Earth boundaries research by developing the Swedish SIQ business excellence model. Purpose The purpose of this paper is to develop SIQ model so it contains what is necessary to identify organizations impact on Earth 9 boundaries.  Method A qualitative research method has been used and the analysis has been done by using the Planetary Boundaries research and top-down & bottom-up perspective as a lens to identify problem, solution and to analyse the SIQ model, then data has been collected by literature studies. Results The result chapter is the presentation of a model than show the relation between the Earth system and boundaries. This is followed by the analysis of the SIQ model that suggest main development needs in the environmental management criteria. The development should incorporate a top-down & bottom-up perspective in order to effectively consider external criteria’s such as Earth boundaries in the management of the organization at management and activity level. Discussion For organisations to consider external factors such as Earth boundaries the SIQ criteria’s and goals has to interact. And by interacting Earth boundaries with the SIQ model the gap between organizations and environmental science are reduces. By reducing this gap the organizations activities can contribute to minimize the degradation on Earth systems and risk for collapse / Bakgrund Företagens aktiviteter fortsätter att vara särkopplade från vetenskapen om Jordens globala system och till vilken utsträckning företagen motverkar kollaps av Jordens system är oklart (Whiteman et al. 2014) och det är denna utmaning som denna uppsats söker att utforska genom att koppla företagens hållbarhetsarbete med Jordens 9 gränser genom at utveckla SIQ modellen. Syfte Syfte med denna uppsats är att utveckla SIQ modellen så den innehåller det som krävs för att företagen skall identifiera sin inverkan på Jordens 9 gränser. Metod En kvalitativ metod har använts och för att analysera har gjorts genom att använda Jordens 9 gränser och top-down/bottom-up perspektivet som lins för att identifiera problem, lösningar och analysen av SIQ modellen och datainsamlingen har gjorts genom litteraturstudier. Resultat Resultatkapitlet introducerar en modell som visar samverkan mellan Jordens system och 9 gränser ner till företagen aktiviteter. Modellen följs av analysen av SIQ modellen som visar störst utvecklingspotential i miljöledningskriterierna. Utvecklingen bör samverka med top-down/bottom-up perspektiven för att modellen skall på bästa sätt omhänderta externa faktorer såsom Jordens gränser i styrningen av företagen på överordnad och utförarnivå. Diskussion För att företagen skall kunna omhänderta alla externa faktorer såsom Jordens gränser så måste SIQ kriterierna och företagens mål samverka. Genom att integrera Jordens gränser med SIQ modellen så har gapet mellan företagen och miljövetenskapen minskats. Genom att minska detta gap kan företagens aktiviteter bidra till att minimera nerbrytningen och risk för kollaps av Jordens system.

Content of this work is of practical use of EFQM model using self-assessment criteria in the selected company. Work takes into account the individual elements in the functioning of the company to identify gaps in the organization and the discovery of hidden potentials of the company.

No

In today's society, the linear economy dominates. As a result of the earth’s limited resources, an ever-increasing focus is on the need for companies to become sustainable. One concept that has become more prevalent in this context is the Triple Bottom Line, which emphasizes the importance of a balance between people, profit, and planet. In manufacturing industries, circular economy can be a way to reach sustainability and the Triple Bottom Line. However, many companies prioritize quality and profitability. The Business Excellence Model is a business model that focuses on quality and achieving business excellence. However, many consider that quality and business excellence do not go hand in hand with sustainability and circular economy. The purpose of the study was to understand how the manufacturing industry, through its Business Excellence Model, can contribute to a more sustainable future by using circular economy in its business development. This was done by expanding existing theories of Business Excellence Model and exploring how manufacturing companies can integrate a Triple Bottom Line perspective with the help of circular economy. A qualitative method was used to conduct the study and data collection was done through semi-structured interviews with researchers and professionals in relevant areas. Based on the theory, a conceptual model was developed that links the theoretical framework. The empirical results of the interviews were then compared against existing theories to answer the research questions. The study resulted in seven factors that can be important to keep in mind for a Triple Bottom Line Business Excellence Model. These factors are clear and committed leadership, committed and loyal employees, customers and stakeholders, collaboration, long-term perspective, a holistic perspective, and sustainable business. Some of these factors already existed in the excellence models, while others were added. There were also three strategies that should be considered to make a successful shift from Single Bottom Line to Triple Bottom Line. These strategies were: changing management strategy, expanding the perspective, and finding a way to do business of sustainability. The conclusion that could be drawn from this is that manufacturing companies may be facing a paradigm shift where they must realize that they can make money and do business on sustainability. / I dagens samhälle dominerar den linjära ekonomin och till följd av jordens begränsade resurser riktas ett allt större fokus mot att företag måste bli hållbara. Ett koncept som har blivit alltmer förekommande i detta sammanhang är Triple Bottom Line som betonar vikten av en balans mellan ekonomisk, miljömässig och social hållbarhet. Inom tillverkande industrier kan cirkulär ekonomi vara en väg för att nå hållbarhet och specifikt Triple Bottom Line. Många företag prioriterar dock kvalitet och lönsamhet. Business Excellence Model är en affärsmodell som fokuserar mycket på kvalitet och att uppnå så kallad business excellence. Många anser emellertid att kvalitet och business excellence inte går ihop med hållbarhet och cirkulär ekonomi. Syftet med studien var att förstå hur tillverkningsindustrin, genom sin Business Excellence Model, kan bidra till en mer hållbar framtid med hjälp av cirkulär ekonomi i sin verksamhetsutveckling. Det genom att expandera existerande teorier om Business Excellence Model och undersöka hur tillverkande företag kan integrera ett Triple Bottom Line-perspektiv med hjälp av cirkulär ekonomi. En kvalitativ metod användes för att genomföra studien och datainsamling skedde genom semistrukturerade intervjuer med forskare och yrkesverksamma inom relevanta områden. Utifrån teorin togs det fram en konceptuell modell som kopplar samman det teoretiska ramverket. Det empiriska resultatet från intervjuerna jämfördes därefter mot existerande teorier för att svara på de formulerade forskningsfrågorna. Studien resulterade i sju faktorer som kan vara viktiga att ha i åtanke för en Triple Bottom Line Business Excellence Model. Dessa faktorer är tydligt och engagerat ledarskap, engagerade och lojala medarbetare, kunder och intressenter, samarbete, långsiktighet, helhetsperspektiv och hållbara affärer. Vissa av dessa faktorer existerade redan i excellence-modellerna, medan andra tillkom som nya. Det uppkom även tre strategier som bör beaktas för att göra ett lyckat skifte från Single Bottom Line till Triple Bottom Line. Strategierna är: ändra ledningsstrategi, vidga perspektivet och hitta ett sätt att göra business av hållbarhet. Slutsatsen som kunde dras utifrån detta är att tillverkande verksamheter står inför ett eventuellt paradigmskifte där de måste inse att man kan tjäna pengar på och göra business av hållbarhet.

The construction industry has inherent problems due to its structure and fragmentation. Its poor performance has been challenged by its client base and it has been forced to seek ways to deliver improved performance. This project was initiated as a response to this challenge and represents one organisation's attempt to deliver improvements. This organisation provides both design and construction solutions, offering ‘total life of asset support' from business consultancy through to decommissioning, in a neutral contractual environment. Initial investigations of the integration of design and construction and of the use of the EFQM Excellence Model concluded that a holistic view of the organisation's performance was needed. Most organisations use traditional, easily quantifiable measures, such as time and cost, whilst neglecting the softer cultural issues, as a way of assessing overall business performance. This prompted further research into the use of performance measurement and also a review of the culture that existed within the organisation. It became clear that many performance initiatives failed because of the lack of ‘Change Action driven by Results (CAR)'. The failure to initiate change or implement action based on the results achieved, means that performance measures are not being integrated into the management systems of the organisations. Based on the conclusions of this work, this project has developed and implemented the Integrated Business Improvement System (IBIS) within the primary case study unit and also two other organisations, all of which are part of AMEC Plc. The project details the barriers that were experienced during the development and implementation of the system and concludes that it is the human component that is critical for the successful implementation and use of any improvement system. The findings of this work have been presented in five peer- reviewed papers.

During the last twenty years, Total Quality Management and Business Excellence Models [BEMs] have been very attractive to organisations as an improvement strategy, as there has been a push by governments to encourage this trend in both public and private sector organisations through the development of national quality awards. There remain difficulties in the successful implementation of BEMs, as there have been high implementation failures rates in various industrial settings. It appears that these failures have been the result of a failure to identify key influential factors that might be incorporated into organisations’ BEM implementation guidelines. Therefore, this research attempts to identify the key influential factors for the successful implementation of a BEM and then examines the role of these factors when they are incorporated with the implementation strategy of a BEM in a public sector organisation in the United Arab Emirates, the Abu Dhabi Police. The research takes a mixed-methods approach including a systematic literature review, a questionnaire survey of 300 employees and 25 interviews with top managers and BEM implementation team members in the Abu Dhabi Police. The quantitative data is assessed using descriptive and inferential statistical analysis. A paired-samples t-test is used to compare perceptions and the actual presence of key influential factors. Additionally, the correlation between these factors and the implementation efficiency of the BEM is investigated by using a Pearson’s correlation coefficient analysis. The interviews are also subjected to thematic analysis. The key findings are that there are 18 key influential factors which significantly impacted on the successful implementation of the BEM in this public sector organisation; therefore they should be considered as a whole during any such implementation. These factors can be grouped into associated stages of commitment, implementation and measurement, leading to the development of a conceptual framework to be used as a roadmap for the implementation of BEMs by public sector organisations.

The objective of this diploma thesis is to map the opinions of organisations and the public on the value and benefits of the National Quality Award of the Czech Republic based on the realised survey. The results of this survey are used to reason the suggestions to improve the importance of the prize and its perception in the society. Apart from the general quality conception, the theoretical part of the thesis also includes the presentation of the EFQM Excellence Model principle that represents a base for the National Quality Award of the Czech Republic. The particular programmes of this prize are also presented - the ones the organisations may apply for. The practical part contains the analyses and data evaluations from the questionnaires that were answered by organisations as well as the respondents from the public. The practical part also includes the review of the quality prizes awarded abroad.

The master´s thesis analyzes the performance of company Řetězárna Ltd. by using the Model START, which is based on the EFQM Excellence Model principle. The first part is devoted to the theoretical description of performance measurement. The second part of the master´s thesis deals with the application of these theoretical findings in practice, in the form of an analysis according to the Model START. In the last part of the master´s thesis, according to the results of the analytical part, are proposed new possible improvements to increase the performance of Řetězárna Ltd.

Master´s thesis is focused on valuation of efficiency of NEPA Ltd. This valuation of efficiency is performed on EFQM Excellence Model. Theoretical part of thesis is focused on description of selected models of valuation of efficiency with a bigger orientation to EFQM Excellence Model. In practical part is NEPA Ltd. introduced, included it´s field of business and on the base of EFQM Excellence Model is valuation of efficiency made. In conclusion are series of recommendations for increase efficiency.

O desenvolvimento da Indústria Automobilística mundial como também a brasileira, se caracteriza pela importância cada vez maior de projetos conjuntos entre montadoras e seus fornecedores, os quais passaram de meros fornecedores de componentes, para parceiros de desenvolvimento e tecnologia, compartilhando investimentos e riscos, tornando a gestão dos projetos com fornecedores um fator estratégico de suma importância para as montadoras. Para pesquisar a evolução dos fatores críticos de sucesso na Gestão de Projetos Automotivos no Brasil, foram estudados 3 projetos sucessivos de desenvolvimento de painéis para veículos comerciais, ocorridos em uma grande montadora no período de 1988 a 2002. Baseado em avaliações bibliográficas relativas à Qualidade, à Gestão de Projetos e à Gestão de Fornecedores, definiu-se pela utilização do modelo de excelência do EFQM, o Project Excellence Model para pesquisa e classificação dos fatores críticos de sucesso dos projetos. Participantes desses três projetos e stakeholders nos diversos níveis hierárquicos da montadora e dos fornecedores foram entrevistados e através da metodologia dos incidentes críticos, levantados os principais fatores positivos que levaram à sucessos e fatores negativos que ocasionaram insucessos ao projeto. A classificação desses fatores através de Critérios e Categorias permitiu a comparação sistemática dos projetos e a definição dos fatores críticos de sucesso e dos fatores de sucesso. Pesquisas na literatura e consultas aos autores e a participantes de projetos de desenvolvimento de painéis em outras montadoras mostraram tendências semelhantes aos dos três projetos, realçando o aumento das responsabilidades dos fornecedores pelo desenvolvimento e fornecimento de sistemas com base na engenharia simultânea e codesign. Estas pesquisas mostraram a aplicabilidade dos Critérios do Project Excellence Model para a classificação dos fatores críticos na gestão dos projetos e a necessidade de uma subdivisão destes em Categorias. / The worldwide development of the Automotive Industry, as well as the Brazilian one, is characterized by the increase of importance of common projects of the automotive industries and their suppliers, which have passed from merely part suppliers to partners of development and technology, sharing investment and risks, transforming the project management with suppliers into a strategic factor of huge importance for the automotive industries. To investigate the critical success factors of Brazilian Automotive Project Management, it was studied three successive development projects of panels for commercial vehicles occurred between 1988 and 2002 in an important automotive industry. Based on literature research related to Quality, Project Management and Supplier Management, it was defined the application of the EFQM Project Excellence Model to research and classify the critical success factors of those projects. Participants of the three projects and stakeholders at different levels from the Automotive Industry and their Suppliers were interviewed and through the critical incident methodology, were detected the main positive factors, that lead to success and the main negative factors that lead to unsuccessfulness of the projects. The classification of those factors in Criteria and Categories allowed a systematic comparison of the projects and the definition of the critical success factors and the success factors. Research of the literature and interviews with participants on panel ´s development projects in other Automotive Industries showed the same tendencies of the three projects, which emphasized the increased responsibilities of the suppliers regarding the development and supplying of systems based on simultaneous engineering and co design. These researches showed the applicability of the Project Excellence Model Criteria in the classification of the project’s critical success factors and success factors and also showed the necessity of a subdivision, in Categories.