<p>Protein folding and export to the membrane are crucial events in the cell. Both processes may be initiated already at the ribosome, assisted by factors that bind to the polypeptide as it emerges from the ribosome. The signal recognition particle (SRP) scans the ribosome for nascent peptides destined for membrane insertion and targets these ribosomes to the site for translocation in the membrane. Trigger factor (TF) is a folding chaperone that interacts with nascent chains to promote their correct folding, prevent misfolding and aggregation. </p><p>In this thesis, we first investigated membrane targeting and insertion of two heterologous membrane proteins in E. coli by using in vitro translation, membrane targeting and cross-linking. We found that these proteins are dependent on SRP for targeting and that they initially interact with translocon components in the same way as native nascent membrane proteins. </p><p>Moreover we have characterised the SRP and TF interactions with the ribosome both with cross-linking experiments and with quantitative binding experiments. Both SRP and TF bind to ribosomal L23 close to the nascent peptide exit site where they are strategically placed for binding to the nascent polypeptide. </p><p>Quantitative analysis of TF and SRP binding determined their respective KD values for binding to non translating ribosomes and reveals that they bind simultaneously to the ribosome, thus having separate binding sites on L23. </p><p>Finally, binding studies on ribosome nascent chain adds clues as to how TF functions as a chaperone.</p>

Graduation date: 2005

OmniMerge performs a systematic search to enumerate all conformations of a molecule (at a given level of torsion-angle resolution) that satisfy a set of local geometric constraints. Constraints would typically come from NMR experiments, but applications such as docking or homology modeling could also give rise to similar constraints. The molecule to be searched is partitioned into small subchains so that the set of possible conformations for the whole molecule may be constructed by merging the feasible conformations for the subchain parts. However, instead of using a binary tree for straightforward divide-and-conquer, OmniMerge defines a sub-problem for every possible subchain of the molecule. Searching every subchain provides a counter-intuitive advantage: with every possible subdivision available for merging, one may choose the most favorable merge for each subchain, particularly for the bottleneck chain(s). Improving the bottleneck step may therefore cause the whole search to be completed more quickly. Finally, to discard infeasible conformations more rapidly, OmniMerge filters the solution set of each subchain based on compatibility with the solutions sets of all overlapping subchains. These two innovations—choosing the most favorable merges and enforcing consistency between overlapping subchains—yield significant improvements in run time. By determining the extent of structural variability permitted by a set of constraints, OmniMerge offers the potential to aid error analysis and improve confidence for NMR results on peptides and moderate-sized molecules. / Singapore-MIT Alliance (SMA)

Thesis (Ph. D.)--University of Washington, 2006. / Vita. Includes bibliographical references (leaves 143-156).

Das E. coli Expressionssystem ist das am häufigsten angewandte hinsichtlich der rekombinante Proteinexpression für strukturelle und funktionelle Analysen aufgrund der hohen erzielten Ausbeuten und der einfachen Handhabbarkeit. Allerdings ist insbesondere die Expression eukaryotischer Proteine in E. coli problematisch, z.B. wenn das Protein nicht korrekt gefaltet ist und in unlöslichen Inclusion Bodies anfällt. In manchen Fällen ist die Analyse von Deletionskonstrukten oder einzelnen Proteindomänen der Untersuchung des Vollängeproteins vorzuziehen. Dies umfasst die Herstellung eines Satzes von Expressionskonstrukten, welche charakterisiert werden müssen. In dieser Arbeit werden Methoden optimiert und evaluiert für die in vitro-Faltung von Inclusion Body-Proteinen sowie die Entwicklung einer Hochdurchsatz-Charakterisierung von Expressionskonstrukten. Die Überführung von Inclusion Body-Proteinen in den nativen Zustand beinhaltet zwei Schritte: (a) Auflösen mit einen chaotropen Reagenz oder starkem ionischen Detergenz und (b) Faltung des Proteins durch Beseitigung des Chaotrops begleitet von dem Transfer in einen geeigneten Puffer. Die Ausbeute an nativ gefaltetem Protein ist oft stark eingeschränkt aufgrund von Aggregation und Fehlfaltung; sie kann allerdings durch die Zugabe bestimmter Additive zum Faltungspuffer erhöht werden. Solche Additive müssen empirisch identifiziert werden. In dieser Arbeit wurde eine Testprozedur für Faltungsbedingungen entwickelt. Zur Reduzierung der möglichen Kombinationen der getesteten Additive wurden sowohl empirische Beobachtungen aus der Literatur als auch bekannte Eigenschaften der Additive berücksichtigt. Zur Verminderung der eingesetzten Proteinmenge und des Arbeitsaufwandes wurde der Test automatisiert und miniaturisiert mittels eines Pipettierroboters. 20 Bedingungen zum schnellen Verdünnen von denaturierten Proteinen werden hierbei getestet und zwei Bedingungen zur Faltung von Proteinen mit dem Detergenz/Cyclodextrin Protein-Faltungssystem von Rozema et al. (1996). 100 &#181;g Protein werden pro Bedingung eingesetzt. Zusätzlich werden acht Bedingungen für die Faltung von His-Tag-Fusionsproteinen (ca. 200 &#181;g), welche an eine Metallchelat-Matrix immobilisiert sind, getestet. Die Testprozedur wurde erfolgreich angewendet zur Faltung eines humanen Proteins, der p22 Untereinheit von Dynactin, welche in E. coli in Inclusion Bodies exprimiert wird. So wie es sich bei vielen Proteinen darstellt, war auch für p22 Dynactin kein biologischer Nachweistest vorhanden, um den Erfolg des Faltungsexperimentes zu messen. Die Löslichkeit des Proteins kann nicht als eindeutiges Kriterium dienen, da neben nativ gefaltetem Protein, lösliche fehlgefaltete Spezies und Mikroaggregate auftreten können. Diese Arbeit evaluiert Methoden zur Detektion kleiner Mengen nativen Proteins nach dem automatisierten Faltungstest. Bevor p22 Dynactin gefaltet wurde, wurden zwei Modellenzyme zur Evaluierung eingesetzt, bovine Carboanhydrase II (CAB) und Malat Dehydrogenase aus Schweineherz-Mitochondrien. Die wiedererlangte Aktivität nach der Rückfaltung wurde korreliert mit verschiedenen biophysikalischen Methoden. Bindungsstudien mit 8-Anilino-1-Naphtalenesulfonsäure ergaben keine brauchbaren Informationen bei der Rückfaltung von CAB aufgrund der zu geringen Sensitivität und da fehlgefaltete Proteine nicht eindeutig von nativem Protein unterschieden werden konnten. Tryptophan Fluoreszenzspektren der rückgefalteten CAB wurden zur Einschätzung des Erfolges der Rückfaltung angewandt. Die Verschiebung des Intensitätsmaximum zu einer niedrigeren Wellenlänge im Vergleich zum denaturiert entfalteten Protein sowie die Fluoreszenzintensität korrelierten mit der wiedererlangten enzymatischen Aktivität. Für beide Modellenzyme war analytische hydrophobe Interaktionschromatographie (HIC) brauchbar zur Identifizierung rückgefalteter Proben mit aktivem Enzym. Kompakt gefaltetes, aktives Enzym eluierte in einem distinkten Peak im abnehmenden Ammoniumsulfat-Gradienten. Das Detektionslimit für analytische HIC lag bei 5 &#181;g. Im Falle von CAB konnte gezeigt werden, dass Tryptophan-Fluoreszenz-Spektroskopie und analytische HIC in Kombination geeignet sind um Falsch-Positive oder Falsch-Negative, welche mit einem der Monitore erhalten wurden, auszuschließen. Diese beiden Methoden waren ebenfalls geeignet zur Identifizierung der Faltungsbedingungen von p22 Dynactin. Tryptophan-Fluoreszenz-Spektroskopie kann jedoch zu Falsch-Positiven führen, da in machen Fällen Spektren von löslichen Mikroaggregaten kaum unterscheidbar sind von Spektren des nativ gefalteten Proteins. Dies zusammenfassend wurde eine schnelle und zuverlässige Testprozedur entwickelt, um Inclusion Body-Proteine einer strukturellen und funktionellen Analyse zugänglich zu machen. In einem separaten Projekt wurden 88 verschiedene E. coli-Expressionskonstrukte für 17 humane Proteindomänen, welche durch Sequenzanalyse identifiziert wurden, mit einer Hochdurchsatzreinigung und &ndash;faltungsanalytik untersucht, um für die Strukturanalyse geeignete Kandidaten zu erhalten. Nach Expression in einem Milliliter im 96er Mikrotiterplattenformat und automatisierter Proteinreinigung wurden löslich exprimierte Proteindomänen direkt analysiert mittels 1D &#185;H-NMR Spektroskopie. Hierbei zeigte sich, dass insbesondere isolierte Methylgruppen-Signale unter 0.5 ppm sensitive und zuverlässige Sonden sind für gefaltetes Protein. Zusätzlich zeigte sich, dass &ndash; ähnlich zur Evaluierung des Faltungstests &ndash; analytische HIC effizient eingesetzt werden kann zur Identifizierung von Konstrukten, welche kompakt gefaltetes Protein ergeben. Sechs Konstrukte, welche zwei Domänen repräsentieren, konnten schnell als tauglich für die Strukturanalyse gefunden werden. Die Struktur einer dieser Domänen wurde kürzlich von Mitarbeitern gelöst, die andere Struktur wurde im Laufe dieses Projektes von einer anderen Gruppe veröffentlicht. / For recombinant production of proteins for structural and functional analyses, the E. coli expression system is the most widely used due to high yields and straightforward processing. However, particularly the expression of eukaryotic proteins in E. coli is often problematic, e.g. when the protein is not folded correctly and is deposited in insoluble inclusion bodies. In some cases it is favourable to analyse deletion constructs of a protein or an individual protein domain instead of the full-length protein. This implies the generation of a set of expression constructs that need to be characterised. In this work methods to optimise and evaluate in vitro folding of inclusion body proteins as well as high-throughput characterisation of expression constructs were developed. Transferring inclusion body proteins to their native state involves two steps: (a) solubilisation with a chaotropic reagent or a strong ionic detergent and (b) folding of the protein by removal of the chaotrop accompanied by the transfer into an appropriate buffer. The yield of natively folded protein is often substantially reduced due to aggregation or misfolding; it may, however, be improved by certain additives to the folding buffer. These additives need to be identified empirically. In this thesis a screening procedure for folding conditions was developed. To reduce the number of possible combinations of screening additives, empirical observations documented in the literature as well as well known properties of certain screening additives were considered. To decrease the amount of protein and work invested, the screen was miniaturised and automated using a pipetting robot. Twenty rapid dilution conditions for the denatured protein are tested and two conditions for folding of proteins using the detergent/cyclodextrin protein folding system of Rozema et al. (1996). 100 &#181;g protein is used per condition. In addition, eight conditions can be tested for folding of His-tagged proteins (approx. 200 &#181;g) immobilised on metal chelate resins. The screen was successfully applied to fold a human protein, the p22 subunit of dynactin that is expressed in inclusion bodies in E. coli. For p22 dynactin &ndash; as is the case for many proteins &ndash; there was no biological assay available to assess the success of the folding screen. Protein solubility can not be used as a stringent criterion because beside natively folded protein, soluble misfolded species and microaggregates may occur. This work evaluates methods to detect small amounts of natively folded protein after automated folding screening. Before folding screening with p22 dynactin, two model enzymes, bovine carbonic anhydrase II (CAB) and pig heart mitochondrial malate dehydrogenase, were used for evaluation. Recovered activity after refolding was correlated to different biophysical methods. 8-anilino-1-naphtalenesulfonic acid binding-experiments gave no useful information when refolding CAB, due to low sensitivity and because misfolded protein could not be readily distinguished from native protein. Tryptophan fluorescence spectra of refolded CAB were used to assess the success of refolding. The shift of the intensity maximum to a shorter wavelength, compared to the denaturant unfolded protein, as well as the fluorescence intensity correlated to recovered enzymatic activity. For both model enzymes, analytical hydrophobic interaction chromatography (HIC) was useful to identify refolded samples that contain active enzyme. Compactly folded, active enzyme eluted in a distinct peak in a decreasing ammonium sulfate gradient. The detection limit of analytical HIC was approx. 5 &#181;g. In case of CAB, tryptophan fluorescence spectroscopy and analytical HIC showed that both methods in combination can be useful to rule out false positives or false negatives obtained with one method. These two methods were also useful to identify conditions for folding of p22 dynactin. However, tryptophan fluorescence spectroscopy can lead to false positives because in some cases spectra of soluble microaggregates are not well distinguishable from spectra of natively folded protein. In summary, a fast and reliable screening procedure was developed to make inclusion body proteins accessible to structural or functional analyses. In a separate project, 88 different E. coli expression constructs for 17 human protein domains that had been identified by sequence analysis were analysed using high-throughput purification and folding analysis in order to obtain candidates suitable for structural analysis. After 96 deep-well microplate expression and automated protein purification, solubly expressed protein domains were directly analysed using 1D &#185;H-NMR spectroscopy. It was found that isolated methyl group signals below 0.5 ppm are particularly sensitive and reliable probes for folded protein. In addition &ndash; similar to the evaluation of a folding screen &ndash; analytical HIC proved to be an efficient tool for identifying constructs that yield compactly folded protein. Both methods, 1D &#185;H-NMR spectroscopy and analytical HIC, provided complementary results. Six constructs, representing two domains, could be quickly identified as targets that are well suitable for structural analysis. The structure of one of these domains was solved recently by co-workers, the other structure was published by another group during this project.

The mechanical behaviour of coated papers during folding has been investigated. This problem has been studied with experimental techniques and numerical analyses in order to give a better understanding of the folding properties of coated papers pertinent to the mechanical behaviour in general, and particularly cracking along the fold. A microscopy investigation has been performed. The surface of the folded paper has been carefully examined to study the event of fracture and related issues. The influence of the grammage on the cracking event has been studied and it was shown that the coating material would not fail if the paper sample was sufficiently thin. It was found that a stress or strain based criterion is sufficient to describe the cracking of the coating layers and that the anisotropy of paper should be taken into account when studying the folding process. The finite element method has been used for the numerical analyses remembering that the geometry of the problem is rather complicated, excluding a solution in analytical form. Using different constitutive models for the base stock, it has been shown that the deformation of the coated paper during folding is much governed by the paper substrate. The numerical results also suggested that particular forms of plastic anisotropy can substantially reduce the maximum strain levels in the coating. Furthermore, it has also been shown that delamination buckling, in the present circumstances, has a very small influence on the strain levels in the coating layer subjected to high tensile loading. Dynamic effects have also been studied and it has been shown that a quasi-static analysis of the problem is sufficient in order to describe many of the important features related to cracking. An attempt to model strong anisotropy of paper has been presented and the results indicate that the large anisotropy in the thickness direction of coated papers needs to be taken into account in order to fully understand the mechanics of folding. Finally, an experimental investigation has been presented in order to study if important mechanical properties of the coating material could be determined by microindentation techniques. The results presented indicate that microindentation can be a powerful tool for characterization of these materials, but only if careful efforts are made in order to account for the influence from plasticity as well as from boundary effects. KEYWORDS: folding, coated papers, finite element method, cracking, indentation, anisotropy, plasticity.

Protein folding and export to the membrane are crucial events in the cell. Both processes may be initiated already at the ribosome, assisted by factors that bind to the polypeptide as it emerges from the ribosome. The signal recognition particle (SRP) scans the ribosome for nascent peptides destined for membrane insertion and targets these ribosomes to the site for translocation in the membrane. Trigger factor (TF) is a folding chaperone that interacts with nascent chains to promote their correct folding, prevent misfolding and aggregation. In this thesis, we first investigated membrane targeting and insertion of two heterologous membrane proteins in E. coli by using in vitro translation, membrane targeting and cross-linking. We found that these proteins are dependent on SRP for targeting and that they initially interact with translocon components in the same way as native nascent membrane proteins. Moreover we have characterised the SRP and TF interactions with the ribosome both with cross-linking experiments and with quantitative binding experiments. Both SRP and TF bind to ribosomal L23 close to the nascent peptide exit site where they are strategically placed for binding to the nascent polypeptide. Quantitative analysis of TF and SRP binding determined their respective KD values for binding to non translating ribosomes and reveals that they bind simultaneously to the ribosome, thus having separate binding sites on L23. Finally, binding studies on ribosome nascent chain adds clues as to how TF functions as a chaperone.

Self-assembly has emerged as a promising technique for fabrication of novel hybrid materials and nanostructures. The work presented in this thesis has been focused on developing nanoscale materials based on synthetic de novo designed polypeptides. The polypeptides have been utilized for the assembly of gold nanoparticles, fibrous nanostructures, and for sensing applications. The 42-residue polypeptides are designed to fold into helix-loop-helix motifs and dimerize to form four-helix bundles. Folding is primarily driven by the formation of a hydrophobic core made up by the hydrophobic faces of the amphiphilic helices. The peptides have either a negative or positive net charge at neutral pH, depending on the relative abundance of Glu and Lys. Charge repulsion thus prevents homodimerization at pH 7 while promoting hetero-dimerization through the formation of stabilising salt bridges. A Cys incorporated in position 22, located in the loop region, allowed for directed, thiol-dependent, immobilization on planar gold surfaces and gold nanoparticles. The negatively charged (Glu-rich) peptide formed homodimers and folded in solution at pH &lt; 6 or in the presence of certain metal ions, such as Zn2+. The folding properties of this peptide were retained when immobilized directly on gold, which enabled reversible assembly of gold nanoparticles resulting in aggregates with well-defined interparticle separations. Particle aggregation was found to induce folding of the immobilized peptides but folding could also be utilized to induce aggregation of the particles by exploiting the highly specific interactions involved in both homodimerization and hetero-association. The possibility to control the assembly of polypeptide-functionalized gold nanoparticles was utilized in a colorimetric protein assay. Analyte binding to immobilized ligands prevented the formation of dense particle aggregates when subjecting the particles to conditions normally causing extensive aggregation. Analyte binding could hence easily be distinguished by the naked eye. Moreover, the peptides were utilized to assemble gold nanoparticles on planar gold and silica substrates. Fibrous nanostructures were realized by linking monomers through a disulphide-bridge. The disulphide-linked peptides were found to spontaneously assemble into long and extremely thin peptide fibres as a result of a propagating association mediated by folding into four-helix bundles. / Ingenjörer och vetenskapsmän har ofta inspirerats av naturen i sökandet efter lösningar på tekniska problem. Allt ifrån byggnadskonstruktioner, flygplansvingar, kompositmaterial till kardborrebandet har skapats med utgångspunkt från förebilder i naturen. Många av de material och konstruktioner som återfinns i naturen har åtråvärda egenskaper som är svåra att erhålla i syntetiska matrial med traditionell teknik. Även om vi i flera fall kan härma sammansättningen och formen blir resultatet inte nödvändigtvis det samma. Den största skillnaden mellan syntetiska material och material producerade av levande organismer är hur deras komponenter sinsemellan är organiserade och sammansatta. I syntetiska material är komponenterna ofta inbördes mer eller mindre slumpvis ordnade medan de i biologiska material är organiserade med en oerhörd precision som sträcker sig ända ned på molekyl- och atomnivå. Naturens byggstenar har genom evolutionens gång förfinats för att spontant kunna organisera sig och bilda komplexa material  och strukturer. Denna process, som styrs genom att många svaga krafter inom och mellan byggstenarna samverkar, kallas ofta för självorganisering och är en förutsättning för allt liv. Självorganisering har också blivit en allt viktigare metod inom nanotekniken för att konstruera material och strukturer med nanometerprecision. I den här avhandlingen beskrivs en typ av självorganiserande material där byggstenarna utgörs av nanometerstora guldpartiklar och syntetiska proteiner. De syntetiska proteinerna är designade för att efterlikna naturliga biomolekyler och antar en välbestämd tredimensionell struktur när två av dem interagerar med varandra. Denna interaktion är mycket specifik men kan styras genom att variera kemiska parametrar som surhet och jonstyrka vilket ger en möjlighet att påverka och kontrollera proteinernas struktur. Proteinerna har vidare modifierats för att spontant organisera sig till fibrer som är flera mikrometer långa men endast några nanometer tjocka. Proteinfibrer utgör en mycket viktig typ av strukturer i biologiska system och finns i alltifrån spindelväv till muskler. Syntetiska proteinfibrer är därför både ett intressant modellsystem och ett material med många potentiellt intressanta användningsområden. Genom att fästa de syntetiska proteinerna på ytan av guldnanopartiklar går interaktionerna mellan partiklarna att kontrollera på samma sätt som interaktionerna mellan proteinerna. Krafterna mellan proteinerna och interaktionerna involverade i proteinernas veckning har använts för att reversibelt aggregera och organisera nanopartiklarna. Ett antal olika byggstenar har studerats och utvecklats till något som liknar ett mycket enkelt nano-Lego, som på en given signal spontant bygger ihop sig eller trillar isär. Guldnanopartiklar är intressanta eftersom de är stabila och lätta att modifiera kemiskt men också på grund av deras optiska egenskaper som ger dem en ovanligt vacker vinröd färg. Färgen uppstår på grund av partiklarnas ringa storlek och varierar naturligt med egenskaperna hos den omgivande miljön. Detta gör det enkelt att studera hur partiklarna interagerar eftersom de byter färg när de närmar sig varandra, men gör dem också intressanta för sensortillämpningar. En enkel och robust sensor beskrivs i avhandlingen där syntetiska proteiner, speciellt utformade för att upptäcka och binda andra molekyler, har fästs på nanopartiklarna. Med partiklarnas hjälp går det att med blotta ögat detektera ett mänskligt protein i koncentrationer under ett tusendels gram per liter. En tidig diagnos av sjukdomstillstånd kan i de flesta fall avsevärt underlätta behandlingen och behovet av enkla sensorer för att bestämma närvaro och koncentration av medicinskt intressanta molekyler är därför mycket stort.

One of the most challenging tasks remaining in the field of biochemistry is the one of understanding how the information within the amino acid sequence of proteins translates into a unique structure. Solving this problem would lead to endless possibilities for application in the medical and biotechnology industry. Many decades ago scientists realized that the process that facilitates the folding of a polypeptide chain could not be random and happen by chance; there needs to be direction in the folding free energy landscape. This landscape is defined by the thermodynamic factors entropy and enthalpy. The contribution made by enthalpy i.e. the contact energies from intra- and intermolecular interactions have been extensively investigated by various mutational studies. The influence of entropy on the other hand, is less well understood. My work focuses on the effect of altering the entropic components of forming the various parts of a known protein scaffold. This is done by genetic engineering in combination with biophysical characterisation and analysis. The results show effects on protein folding rates as well as on the pathway for nucleation and emphasis the ability of the folding landscape to readjust to entropic variations. Proteins are therefore not required to fold along a unique route to their final structure but can do so in several ways. The folding pathways we observe today have hence likely evolved as an adaptation to biological demands.

Proteins are the most important molecules in the cell since they take care of most of the biological functions which resemble life. To ensure that everything is working properly the cell has a rigorous control system to monitor the proper function of its proteins and sends old or dysfunctional proteins for degradation. Unfortunately, this system sometimes fails and the once so vital proteins start to misbehave or to accumulate and in the worst case scenario these undesired processes cause the death of their host. One example is Amyotrophic Lateral Sclerosis (ALS); a progressive and always fatal neurodegenerative disorder that is proposed to derive from accumulation of aberrant proteins. Over 140 mutations in the human gene encoding the cytosolic homodimeric enzyme Cu/Zn-Superoxide Dismutase (SOD1) are linked to ALS. The key event in SOD1 associated ALS seems to be the pathological formation of toxic protein aggregates as a result of initially unfolded or partly structured SOD1-mutants. Here, we have compared the folding behaviour of a set of ALS associated SOD1 mutants. Based on our findings we propose that SOD1 mediated ALS can be triggered by a decrease in protein stability but also by mutations which reduce the net charge of the protein. Both findings are in good agreement with the hypothesis for protein aggregation. SOD1 has also been found to be able to interact with mitochondrial membranes and SOD1 inclusions have been detected in the inter-membrane space of mitochondria originating from the spinal cord. The obvious question then arose; does the misfolding and aggregation of SOD1 involve erroneous interactions with membranes? Here, we could show that there is an electrostatically driven interaction between the reduced apo SOD1 protein including ALS associated SOD1-mutants and charged lipid membrane surfaces. This association process changes the secondary structures of these mutants in a way quite different from the situation found in membrane free aqueous environment. However, the result show that mutants interact with charged lipid vesicles to lesser extent than wildtype SOD1. This opposes the correlation between decreased SOD1 stability and disease progression. We therefore suggest that the observed interaction is not a primary cause in the ALS mechanism.