Rational conversion of biologically active peptides to nonpeptide compounds with retained activity is an appealing approach in drug development. One important objective of the work presented in this thesis was to use computational modeling to aid in such a conversion of the peptide angiotensin II (Ang II, Asp-Arg-Val-Tyr-Ile-His-Pro-Phe). An equally important objective was to gain an understanding of the requirements for ligand binding to the Ang II receptors, with a focus on interactions with the AT2 receptor. The bioactive conformation of a peptide can provide important guidance in peptidomimetic design. By designing and introducing well-defined secondary structure mimetics into Ang II the bioactive conformation can be addressed. In this work, both γ- and β-turn mimetic scaffolds have been designed and characterized for incorporation into Ang II. Using conformational analysis and the pharmacophore recognition method DISCO, a model was derived of the binding mode of the pseudopeptide Ang II analogues. This model indicated that the positioning of the Arg side chain was important for AT2 receptor binding, which was also supported when the structure–activity relationship of Ang II was investigated by performing a glycine scan. To further examine ligand binding, a 3D model of the AT2 receptor was constructed employing homology modeling. Using this receptor model in a docking study of the ligands, binding modes were identified that were in agreement with data from point-mutation studies of the AT2 receptor. By investigating truncated Ang II analogues, small pseudopeptides were developed that were structurally similar to nonpeptide AT2 receptor ligands. For further guidance in ligand design of nonpeptide compounds, three-dimensional quantitative structure–activity relationship models for AT1 and AT2 receptor affinity as well as selectivity were derived.

It is widely accepted that palladium is one of the most useful catalysts in organic chemistry, and many palladium(0)-catalysed carbon–carbon bond-forming reactions have been developed over the years. In addition, the ever-growing need for more environmentally benign processes in the chemical industry has driven scientists to look for greener options while developing new methodologies for organic synthesis. This thesis describes a series of studies on Suzuki and Heck coupling reactions in water and the application of palladium(0) catalysis to the development of new HIV-1 integrase inhibitors. The previously described 'transition-metal-free Suzuki-type coupling' reaction was shown to take place due to sub-ppm levels of palladium contaminants present in the commercially available sodium carbonate base. Based on this finding, a new, microwave-assisted Suzuki protocol utilizing ppb/ppm levels of palladium in water was developed. This methodology was adapted to terminal Heck coupling, although the scope of the protocol was found to be rather limited. Finally, both Suzuki and Heck reaction processes were successfully scaled up to 100 mmol using an automated batch stop-flow microwave apparatus. As the methodologies utilizing ultralow palladium concentrations were not applicable to aryl chlorides, attention was shifted towards palladium on carbon. This simple catalyst, together with microwave heating employing simultaneous cooling, was found to be beneficial in the Suzuki coupling of aryl chlorides with phenylboronic acid in water. Ligand-controlled internal arylation of ethylene glycol vinyl ether with aryl halides was shown to be possible in water alone without any additives. Reactions were run under air, using conventional heating and the products formed were isolated as aryl methyl ketones in good to excellent yields. The electron-rich (dippp)2Pd complex was shown to be beneficial for the microwave-assisted internal arylation of some aryl chlorides. Furthermore, the active role of the hydroxyl group of ethylene glycol vinyl ether in the formation of a cationic intermediate leading to internal Heck coupling product was elucidated. Finally, to demonstrate the usefulness of palladium(0) catalysis in the development of new pharmaceutical entities, a series of HIV-1 integrase inhibitors was synthesised and evaluated in strand transfer assays and in vitro. Based on the results and docking studies performed, valuable information related to the structure–activity relationship was obtained.

Hepatitis C is a global health problem that affects approximately 120–180 million people. This viral infection causes serious liver diseases and the therapy available suffers from low efficiency and severe side effects. Consequently, there is a huge unmet medical need for new therapeutic agents to combat the hepatitis C virus (HCV). Inhibition of the viral NS3 protease has recently emerged as a promising approach to defeat this infection, and the first HCV NS3 protease inhibitors have now entered clinical trials. In this project, several novel HCV NS3 protease inhibitors have been designed, synthesized and biochemically evaluated. Inhibitors with various P1 C-terminal functional groups intended as potential bioisosteres to the carboxylic acid found in product-based inhibitors have been revealed. Special focus has been placed on establishing structure–activity relationships of inhibitors containing the promising P1 C-terminal acyl sulfonamide group. The properties of the acyl sulfonamide functionality that are important for producing potent inhibitors have been identified. In addition, the advantages of the acyl sulfonamide group compared to the carboxylic acid have been demonstrated in both enzymatic and cell-based assays. Besides the acyl sulfonamide functionality, the acyl cyanamide and the acyl sulfinamide groups have been identified as new carboxylic acid bioisosteres in HCV NS3 protease inhibitors. The synthetic work included the development of a fast and convenient methodology for the preparation of aryl acyl sulfonamides. The use of microwave heating and Mo(CO)6 as a solid carbon monoxide source provided aryl acyl sulfonamides from aryl halides in excellent yields. This method was subsequently used in the decoration of novel HCV NS3 protease inhibitors comprising a non-natural P1 moiety. This new class of compounds can be used as lead structures in a future optimization process aimed at producing more drug-like HCV NS3 protease inhibitors.

The hepatitis C virus (HCV), with a global prevalence of roughly 2%, is among the most serious diseases today. Among the more promising HCV targets is the NS3 protease, for which several drug candidates have entered clinical trials. In this work, computational methods have been developed and applied to the design of inhibitors of the HCV NS3 protease. Comparative molecular field analysis (CoMFA) modeling and molecular docking are the two main computational tools used in this work. CoMFA is currently the most widely used 3D-QSAR method. Methodology for improving its predictive performance by evaluating 6120 combinations of non-default parameters has been developed. This methodology was tested on 9 data sets for various targets and found to consistently provide models of enhanced predictive accuracy. Validation was performed using q2, r2pred and response variable randomization. Molecular docking was used to develop SARs in two series of inhibitors of the HCV NS3 protease. In the first series, preliminary investigations indicated that replacement of P2 proline with phenylglycine would improve potency. Docking suggested that phenylglycine-based inhibitors may participate in two additional interactions but that the larger, more flexible phenylglycine group may result in worse ligand fit, explaining the loss in potency. In the second series, β-amino acids were explored as α-amino acid substitutes. Although β-amino acid substitution may reduce the negative attributes of peptide-like compounds, this study showed that β-amino acid substitution resulted in reduced potency. The P3 position was least sensitive to substitution and the study highlighted the importance of interactions in the oxyanion hole. Finally, docking was used to provide the conformations and alignment necessary for a CoMFA model. This CoMFA model, derived using default settings, had q2 = 0.31 and r2pred = 0.56. Application of the optimization methodology provided a more predictive model with q2 = 0.48 and r2pred = 0.68.

Infection by the hepatitis C virus (HCV) leads to inflammation of the liver, i.e. hepatitis. The acute infection often progresses to a chronic phase during which the liver function is gradually impaired. Approximately 20% of these chronic cases develop liver cirrhosis, with an ensuing increased risk of liver cancer. Global estimates of the total number of chronic cases range from 123–170 million. Yet, neither specific anti-HCV drugs nor vaccines are available. When drugs become available for daily clinical use, rapid development of drug-resistant strains is expected, making resistance an important issue. One of the most studied targets for specific anti-HCV drugs is the NS3 protease. The main objectives of the work presented in this thesis were to design and synthesise peptidomimetic inhibitors of this enzyme, and to establish the structure–activity relationships (SARs) regarding the inhibition of the wild type as well as of the known resistant variants A156T and D168V. Substituted prolines are common P2 residues in HCV NS3 protease inhibitors. To decrease the peptide character of the inhibitors, the non-coded phenylglycine was evaluated as a proline replacement in combination with known and novel P3 and P1 residues and P2 substituents. The results confirmed that phenylglycine is a promising P2 scaffold, with a possible π-stacking interaction with histidine 57 of the active site. However, to benefit from its full potential, additional optimisation is required. A 2(1H)-pyrazinone-based scaffold was introduced as P3 residue. Utilising the scope of the method developed for the pyrazinone scaffold synthesis, the phenylglycine side-chain was transferred to the scaffold. In combination with an aromatic P1 building-block, this design yielded achiral, peptidomimetic inhibitors, three times more potent than the tripeptide lead. The SARs for the inhibition of the resistant variants A156T and D168V were investigated for compounds based on either P2 proline or phenyl­glycine. It was concluded that the vulnerability of the inhibitors to alterations in the enzyme depends on the P2 and the P1 residue, not only on the P2 as previously suggested. These results provide important information for the design of a new generation of inhibitors with improved properties.

This thesis focuses on the design and synthesis of inhibitors targeting Mycobacterium tuberculosis ribonucleotide reductase (RNR) and hepatitis C virus (HCV) NS3 protease; enzymes that have been identified as potential drug targets for the treatment of tuberculosis and hepatitis C, respectively. Small peptides have been recognized as inhibitors of these enzymes. However, the use of peptides as drugs is limited due to their unfavorable properties. These can be circumvented by the development of less peptidic molecules, often referred to as peptidomimetics. When this work was initiated, only a few inhibitors targeting M. tuberculosis RNR had been identified, whereas the HCV NS3 protease was an established drug target. Therefore, early peptidomimetic design strategies were applied to inhibitors of RNR while the NS3 protease inhibitors were subjected to modifications in a later stage of development. It has previously been shown that peptides derived from the C-terminus of the small subunit of M. tuberculosis RNR can compete for binding to the large subunit, and thus inhibit enzyme activity. To investigate the structural requirements of these inhibitors, different series of peptides were evaluated. First, peptides from an N-terminal truncation, an alanine scan and a designed library were synthesized and evaluated to examine the importance of the individual amino acid residues. Then, a set of N-terminally Fmoc-protected peptides was evaluated, and it was found that the N-terminal group improved the affinity of the peptides even when the length of the compounds was reduced. Furthermore, potential inhibitors of less peptidic character were generated by the introduction of a benzodiazepine-based scaffold. To further reduce the peptidic character and investigate the binding properties of HCV NS3 protease inhibitors, a series of tripeptides incorporating a β-amino acid was synthesized. Inhibition was evaluated and docking studies were performed to understand how the structural changes affected inhibitory potency. The results illustrated the importance of preserving the hydrogen bonding network and retaining electrostatic interactions in the oxyanion hole between inhibitor and protein.

Sustainable chemical processes are becoming increasingly important in all fields of synthetic chemistry. Catalysis can play an important role in developing environmentally benign chemical processes, and transition metals have an important role to play in the area of green chemistry. In particular, palladium(II) catalysis includes many key features for successful green chemistry methods, as demonstrated by a number of eco-friendly oxidation reactions catalyzed by palladium(II). The aim of the work presented in this thesis was to develop novel and greener palladium(II)-catalyzed coupling reactions. In striving to achieve this aim, the first open-vessel, room-temperature palladium(II)-catalyzed oxidative Heck reaction, using oxygen from the air as the reoxidant of palladium, was developed. In a further investigation of the palladium(II)-catalyzed oxidative Heck reaction, base-free conditions for the transformation were identified and suitable conditions for microwave-assisted oxidative Heck reactions were established. A convenient and low-cost palladium(II)-catalyzed method for the synthesis of styrene derivatives, by coupling arylboranes with vinyl acetate, was developed. The reaction mechanism was studied using ESI-MS, which enabled the detection of cationic palladium intermediates in ongoing productive reactions, and a plausible catalytic cycle was proposed. In an attempt to make the oxidative Heck and the styrene synthesis reactions more attractive from an industrial point of view, conditions for continuous flow synthesis were identified. The results were generally good and rapid synthesis of the desired products was obtained. The first palladium(II)-catalyzed C–P bond-forming Hirao-type reaction, employing arylboranes instead of the commonly used aryl halides, was developed. An ESI-MS study was performed, and a plausible catalytic pathway was suggested. Finally, a novel method for synthesizing aryl ketones from benzoic acids and nitriles, via palladium(II)-catalyzed decarboxylation of the benzoic acids, was established. Further, the reaction mechanism was studied by ESI-MS and a plausible catalytic route presented.

This thesis describes the use of chiral counter-ions for the enantiomeric separation of amines in non-aqueous capillary electrophoresis. The investigations have been concentrated on studies of the influence, of the chiral counter-ion, the solvent, the electrolyte and the analyte, on the enantioselective separation. Modified divalent dipeptides have been introduced in capillary electrophoresis for the separation of amino alcohols and chiral resolution of amines. Association constants for the ion-pair between dipeptide and amino alcohol could be utilized for development of separation systems with higher amino alcohol selectivity. Chiral discrimination (ion-pair formation) between the dipeptides and amines are preferably generated in non-aqueous background electrolytes (BGEs). The amount of triethylamine in the BGE determined the dipeptide charge and a divalent dipeptide promoted higher enantioselectivity than a monovalent dipeptide. An N-terminal-end blocking group and glutamic acid at the C-terminal-end of the dipeptide was important for chiral separation of the amines. Chemometric and univariate methods have been employed for evaluation of suitable solvent compositions in the BGE. An experimental design including a single solvent as well as binary, ternary and quaternary mixtures of polar organic solvents, showed that optimal enantioresolution was obtained with an ethanol:methanol 80:20 mixture in the BGE.  Furthermore, water was found to have an adverse influence on enantioselectivity and no enantioresolution was obtained with BGEs containing more than 30 % water. An alkali metal hydroxide added to the BGE affected the chiral separation by competing ion-pair formation with the selector. The electroosmosis was reduced in order of decreasing alkali metal ion solvated radius and became anodic using K, Rb or Cs in ethanolic BGEs. The correlation between the amino alcohol structure and the enantioselectivity was investigated using chemometrics. The obtained models showed that enantioselectivity for the amino alcohols was promoted by e.g. degree of substitution and substituent size on the nitrogen.

<p>Proteins have such structural features that they may interact with different types of surfaces by all possible forces, i.e., electrostatic, hydrogen bonding, hydrophobic. In this thesis two different types of coatings for fused silica capillaries aimed to eliminate such interactions have been studied. The first is a covalent, electroosmosis-free coating with polyacrylamide (PAA) and the second involves a non-covalent coating with the quaternary ammonium compound N, N-didodecyl –N, N- dimethylammonium bromide (DDAB) with a strong anodic electroosmosis. Optimal conditions regarding efficiency and resolution were established by variations of the composition and ionic strengths of buffers at pH below the isoelectric point of the proteins. To achieve high efficiency and resolution the choice of buffer constituents was extremely important. </p><p>The PAA coating was very stable at neutral and acidic conditions. Ammonium acetate (0.12 M) and ammonium hydroxyacetate (0.15 M) both at pH 4 provided the best separations with plate numbers up to 1 700 000 plate/m that is among the highest reported in the literature. Capillaries coated with DDAB were stable enough to, without recoating, permit consecutive separations of the proteins up to 9 hours (90 injections). High apparent efficiencies (over 1 million plates/m) were achieved with ammonium acetate (0.07 M), ammonium hydroxyacetate (0.08 M) and sodium phosphate (0.1 M) at pH 4. </p><p>Zone broadening was studied by determination of the variance contributions from all main parameters. Significant variances were contributions from longitudinal diffusion, capillary curvature, injection plug, detector time response and detector slit width while other variances, e.g., variances for Joule heat and vertical sedimentation were negligible. The remaining undetermined variance may have its origin in all types of relatively slow interactions including adsorption onto the capillary surfaces and protein-buffer component interactions. The results indicate that the latter is the main cause to zone broadening in protein separations.</p>

<p>The interactions between anionic, crosslinked gels and cationic surfactants have been investigated. When exposed to oppositely charged surfactant, the gel collapses into a dense complex of polyion and micelles. During deswelling, the gel phase separates into a micelle-rich, collapsed surface phase, and a swollen, micelle-free core, both still part of the same network. As more surfactant is absorbed, the surface phase grows at the expense of the core, until the entire gel has collapsed. Polyacrylate (PA) gels with dodecyl- (C₁₂TAB), and cetyltrimethylammonium bromide (C₁₆TAB), as well as hyaluronate gels with cetylpyridinium chloride, have been studied. </p><p>Kinetic experiments have been performed on macro- as well as microgels, using micromanipulator assisted light microscopy for the latter. A surfactant diffusion controlled deswelling model has been employed to describe the deswelling. The deswelling kinetics of PA microgels have been shown to be controlled by surfactant diffusion through the stagnant layer surrounding the gel, as the surface phase is relatively thin for the major part of the deswelling. For macroscopic PA gels the surface phase is thicker, and the kinetics with C₁₂TAB were therefore also influenced by diffusion through the surface phase, while for C₁₆TAB they were dominated by it. </p><p>Relevant parameters have also been determined using equilibrium experiments. An irregular, balloon-forming deswelling pattern, mainly found for macrogels, as well as unexpectedly long lag times and slow deswelling for microgels, are reported and discussed. </p><p>The microstructure of fully collapsed PA/C₁₂TAB complexes has been studied using small-angle X-ray scattering. A cubic <i>Pm3n</i> structure was found at low salt concentration, which melted into a disordered micellar phase as the salt concentration was increased. Further increasing the salt concentration dissolved the micelles, resulting in no ordering.</p>