Iron (Fe) speciation is important for many biogeochemical processes. The high abundance and limited solubility of Fe(III) are responsible for the widespread occurrence of Fe(III) minerals in the environment. Co-precipitation and adsorption onto mineral surfaces limits the free concentrations of compounds such as arsenate (As(V)), Fe(III) and, phosphate (P(V)). Mineral dissolution, on the other hand, might lead to elevated concentrations of these compounds. Fe speciation is strongly affected by natural organic matter (NOM), which suppresses hydrolysis of Fe(III) via complexation. It limits the formation of Fe(III) minerals and Fe(III) co-precipitation. This thesis is focused on interactions between Fe(III) and NOM as well as their impact on other elements (i.e. As(V) and P(V)). X-ray absorption spectroscopy (XAS) was used to obtain molecular scale information on Fe and As speciation. This was complemented with infrared spectroscopy, as well as traditional wet-chemical analysis, such as pH and total concentration determinations. Natural stream waters, soil solutions, ground water and soil samples from the Krycklan Catchment, in northern Sweden, were analyzed together with model compounds with different types of NOM. A protocol based on ion exchange resins was developed to concentrate Fe from dilute natural waters prior to XAS measurements. Iron speciation varied between the stream waters and was strongly affected by the surrounding landscape. Stream waters originating from forested or mixed sites contained both Fe(II, III)-NOM complexes and precipitated Fe(III) (hydr)oxides. The distribution between these two pools was influenced by pH, total concentrations and, properties of NOM. In contrast, stream waters from wetland sites and soil solutions from a forested site only contained organically complexed Fe. Furthermore, the soil solutions contained a significant fraction Fe(II)-NOM complexes. The soil samples were dominated by organically complexed Fe and a biotite-like phase. Two pools of Fe were also identified in the ternary systems with As(V) or P(V) mixed with Fe(III) and NOM: all Fe(III) was complexed with NOM at low total concentrations of Fe(III), As(V) and/or P(V). Hence, Fe(III) complexation by NOM reduced Fe(III)-As(V)/P(V) interactions at low Fe(III) concentrations, which led to higher bioavailability. Exceeding the Fe(III)-NOM complex equilibrium resulted in the occurrence of Fe(III)-As(V)/P(V) (co-)-precipitates.

Thesis (Ph. D.)--Miami University, Dept. of Geology, 2007. / Title from second page of PDF document. Includes bibliographical references.

O desenvolvimento industrial tem, como conseqüência, a maior geração de resíduos, muitos deles tóxicos aos seres vivos. Dentre esses, benzeno, tolueno e xilenos (BTX), derivados do petróleo, estão contaminando aqüíferos por acidentes no transporte e no armazenamento. Por esse motivo, diversas pesquisas têm sido realizadas buscando formas de biodegradar BTX. Esses trabalhos indicam que os principais fatores que podem influenciar a degradação biológica dos BTX são temperatura, pH, disponibilidade de nutrientes, concentração de tóxicos e diversidade de microrganismos. Visando contribuir com o estudo desses fatores, este trabalho teve por objetivo avaliar a influência do inóculo e de aceptores de elétrons no processo de degradação anaeróbia de BTX. Neste trabalho três inóculos foram pesquisados: 1- biomassa proveniente de reator anteriormente submetido à mistura de gasolina comercial e água; 2- biomassa proveniente de reator da estação de tratamento de esgoto da USP - São Carlos; 3- biomassa proveniente de reator tratando água residuária de abatedouro de aves. Os resultados obtidos comprovaram que a origem do inóculo foi fundamental na degradação anaeróbia de BTX, pois os inóculos apresentaram diferentes períodos de adaptação e porcentagens de degradação do tóxico. Depois de 93 dias de operação os inóculos 1, 2 e 3 apresentaram eficiência de remoção de BTX da ordem de 57%, 83% e 90%, respectivamente. O reator com o inóculo 3 foi submetido a condições metanogênica, sulfetogênica com presença e ausência de Ferro (III). Os resultados demonstraram que a degradação dos BTX foi influenciada pelas diferentes condições adotadas. A adição de Fe (III) melhorou a degradação dos BTX, do reator sob condições sulfetogênicas. / The industrial development has increased the generation of residues. Some of them are toxics and impact the environment. Benzene, toluene and xylenes (BTX), petroleum sub products, are examples of such toxic compounds. These compounds may contaminate aquifers as a result of accidents during transportation or of leakages of storage tanks. Several factors are reported to affect the biodegradation of BTX, such as: temperature, pH, availability of nutrients, concentration of toxics and diversity of microorganisms. This research aimed to study some of these factors, such as different inoculum sources and different electrons acceptors during BTX degradation processes in an horizontal-flow anaerobic immobilized biomass (HAIB) reactor. In this research three inocula were studied: 1- an adapted microbial community for BTX degradation; 2 - microorganisms collected from a pilot-scale UASB reactor treating domestic wastewater; and 3 - Microorganisms collected from an UASB treating poultry slaughterhouse industry wastewater. The results have shown that the inoculum sources were fundamental to the adaptation period for the toxic biodegradation, producing different BTX removal efficiencies. After 93 days of operation, the inocula 1, 2 and 3 showed BTX removal efficiency of 57, 83 and 90%, respectively. The inoculum 3 was submitted to conditions of methanogesis and sulfetogenesis in the presence and absence of Fe (III). The results demonstrated that BTX degradation was affected by the different conditions adopted, showing that the addition of Fe (III) improved biodegradation in the reactor under sulfate reduction condition.

O desenvolvimento industrial tem, como conseqüência, a maior geração de resíduos, muitos deles tóxicos aos seres vivos. Dentre esses, benzeno, tolueno e xilenos (BTX), derivados do petróleo, estão contaminando aqüíferos por acidentes no transporte e no armazenamento. Por esse motivo, diversas pesquisas têm sido realizadas buscando formas de biodegradar BTX. Esses trabalhos indicam que os principais fatores que podem influenciar a degradação biológica dos BTX são temperatura, pH, disponibilidade de nutrientes, concentração de tóxicos e diversidade de microrganismos. Visando contribuir com o estudo desses fatores, este trabalho teve por objetivo avaliar a influência do inóculo e de aceptores de elétrons no processo de degradação anaeróbia de BTX. Neste trabalho três inóculos foram pesquisados: 1- biomassa proveniente de reator anteriormente submetido à mistura de gasolina comercial e água; 2- biomassa proveniente de reator da estação de tratamento de esgoto da USP - São Carlos; 3- biomassa proveniente de reator tratando água residuária de abatedouro de aves. Os resultados obtidos comprovaram que a origem do inóculo foi fundamental na degradação anaeróbia de BTX, pois os inóculos apresentaram diferentes períodos de adaptação e porcentagens de degradação do tóxico. Depois de 93 dias de operação os inóculos 1, 2 e 3 apresentaram eficiência de remoção de BTX da ordem de 57%, 83% e 90%, respectivamente. O reator com o inóculo 3 foi submetido a condições metanogênica, sulfetogênica com presença e ausência de Ferro (III). Os resultados demonstraram que a degradação dos BTX foi influenciada pelas diferentes condições adotadas. A adição de Fe (III) melhorou a degradação dos BTX, do reator sob condições sulfetogênicas. / The industrial development has increased the generation of residues. Some of them are toxics and impact the environment. Benzene, toluene and xylenes (BTX), petroleum sub products, are examples of such toxic compounds. These compounds may contaminate aquifers as a result of accidents during transportation or of leakages of storage tanks. Several factors are reported to affect the biodegradation of BTX, such as: temperature, pH, availability of nutrients, concentration of toxics and diversity of microorganisms. This research aimed to study some of these factors, such as different inoculum sources and different electrons acceptors during BTX degradation processes in an horizontal-flow anaerobic immobilized biomass (HAIB) reactor. In this research three inocula were studied: 1- an adapted microbial community for BTX degradation; 2 - microorganisms collected from a pilot-scale UASB reactor treating domestic wastewater; and 3 - Microorganisms collected from an UASB treating poultry slaughterhouse industry wastewater. The results have shown that the inoculum sources were fundamental to the adaptation period for the toxic biodegradation, producing different BTX removal efficiencies. After 93 days of operation, the inocula 1, 2 and 3 showed BTX removal efficiency of 57, 83 and 90%, respectively. The inoculum 3 was submitted to conditions of methanogesis and sulfetogenesis in the presence and absence of Fe (III). The results demonstrated that BTX degradation was affected by the different conditions adopted, showing that the addition of Fe (III) improved biodegradation in the reactor under sulfate reduction condition.

Alkenes can undergo a variety of chemical reactions to form more complex molecules with a range of functional groups. This makes them useful starting materials for synthesizing a wide range of organic compounds. Chapter I provided an overview of the development history of alkenyl C−H bond activation. The early reactions of C−H compounds with metal complexes, as well as stoichiometric activation of the transition metal-activated C–H bond, were discussed. Then the first successful and efficient organometallic-catalyzed transformations of a C−H bond, the first transition metal-catalyzed vinylic C–H functionalization, and the first transition metal-catalyzed olefinic C–H functionalization under mild conditions were demonstrated. Finally, enantioselective vinylic C–H functionalization was discussed. In Chapter II, a method for enantioselective vinylic C(sp2)−H bond activation using a Ru(II) catalyst and a chiral transient directing group was developed. Chiral amine was also utilized to control the Z/E stereoselectivity. The method demonstrated a broad substrate scope with good yield, high Z/E ratio stereoselectivity, and excellent enantioselectivity. Its synthetic utility was demonstrated by the synthesis of key structural motifs of particularly useful natural products and pharmaceutical compounds. Additionally, a rare vinylic C−H bond activated ruthenic complex was isolated and determined by single-crystal X-ray diffraction. The methodology suggested in this work is expected to facilitate the further development of asymmetric vinylic C−H functionalization reactions. In Chapter III, a practical and efficient methodology for Ru(II)-catalyzed enantioselective alkenyl C–H bond functionalization of indole-substituted acrylaldehyde derivatives via the chiral transient directing group (CTDG) strategy to obtain optically active pyrrolo[1,2-a]indole derivatives was suggested. The methodology resulted in a series of optically active products with good yields (up to 80%), good stereoselectivity (up to 25.0:1 Z/E), and excellent enantioselectivity (up to 95% ee). Furthermore, synthetic transformations were explored. Chapter IV presented the first demonstration of a sequentially composed catalytic substitution reaction of alkenes for building multi-amido methylated derivatives while reserving the π- components. The process involved a simple Fe (III)-catalyst and bisamidomethane reagent, which directly and selectively transformed α-substituted styrenes into several biologically and pharmaceutically relevant N-heterocycles through tandem processes.

Desenvolveu-se um método espectrofotométrico para determinação de íons Cu(II), Fe(II) e Fe(III) com o reagente cromogênico di-2-piridil cetona benzoilhidrazona (DPKBH), em condições estacionárias e em fluxo. Fez-se a caracterização estrutural e estequiométrica do complexo de Cu(II) com DPKBH usando-se técnicas espectroscópicas de infravermelho e massas, além de análise térmica e elementar. Estudou-se, ainda, a estequiometria dos complexos de Fe(II) e Fe(III) com DPKBH utilizando espectrometria de massas com ionização por electrospray. Desenvolveu-se, preliminarmente, um método espectrofotométrico para a determinação de íons Cu(II) com DPKBH e aplicou-se em amostras de aguardente. Posteriormente, adaptou-se para análise por injeção em fluxo, utilizando-se injetor comutador manual. Em seguida, desenvolveu-se em condições estacionárias um método espectrofotométrico para determinação de Fe(II) e Fe(III) e Cu(II) em uma mesma amostra, com o uso de agentes mascarantes. Fez-se também a adaptação do método para análise em fluxo empregando multicomutação e amostragem binária. Finalmente, determinou-se a concentração de íons Cu(II), Fe(II) e Fe(III) em amostras sintéticas e Cu(II) e ferro total em amostras de sedimento coletadas no reservatório de Guarapiranga. Os resultados obtidos foram comparados com o método de referência de ICP-OES, apresentando concordância para um nível de confiança de 95% da média. / A spectrophotometric method was developed to the determination of Cu(II), Fe(II) and Fe(III) with the chromogenic reagent di-2pyridyl ketone benzoylhydrazone (DPKBH) in stationary conditions as a flow injection process. The structural characterization and the stoichiometry of Cu(II)/DPKBH complex were achieved using infrared spectrometry, mass spectrometry, thermal and elementar analysis. Toe stoichiometry of the Fe(II) and Fe(III) complexes with DPKBH was studied by electrospray ionization mass spectrometry. The spectrophotometric method for the determination of Cu(II) with DPKBH was developed in stationary conditions and, after this, it was adapted to flow injection analysis, using a manual commutator. Subsequently, a spectrophotometric method was developed to determine Fe(II), Fe(III) and Cu(II) in the same sample, in stationary conditions, using masking reagents. This method was also adapted to flow injection analysis, using multicommutation and binary sampling. Finally, Cu(II), Fe(II) and Fe(III) were determined in sediments from Guarapiranga reservoir. The obtained results were compared with the ICP-OES standard methods, showing a good agreement into a 95% confidence level (t-test).

Desenvolveu-se um método espectrofotométrico para determinação de íons Cu(II), Fe(II) e Fe(III) com o reagente cromogênico di-2-piridil cetona benzoilhidrazona (DPKBH), em condições estacionárias e em fluxo. Fez-se a caracterização estrutural e estequiométrica do complexo de Cu(II) com DPKBH usando-se técnicas espectroscópicas de infravermelho e massas, além de análise térmica e elementar. Estudou-se, ainda, a estequiometria dos complexos de Fe(II) e Fe(III) com DPKBH utilizando espectrometria de massas com ionização por electrospray. Desenvolveu-se, preliminarmente, um método espectrofotométrico para a determinação de íons Cu(II) com DPKBH e aplicou-se em amostras de aguardente. Posteriormente, adaptou-se para análise por injeção em fluxo, utilizando-se injetor comutador manual. Em seguida, desenvolveu-se em condições estacionárias um método espectrofotométrico para determinação de Fe(II) e Fe(III) e Cu(II) em uma mesma amostra, com o uso de agentes mascarantes. Fez-se também a adaptação do método para análise em fluxo empregando multicomutação e amostragem binária. Finalmente, determinou-se a concentração de íons Cu(II), Fe(II) e Fe(III) em amostras sintéticas e Cu(II) e ferro total em amostras de sedimento coletadas no reservatório de Guarapiranga. Os resultados obtidos foram comparados com o método de referência de ICP-OES, apresentando concordância para um nível de confiança de 95% da média. / A spectrophotometric method was developed to the determination of Cu(II), Fe(II) and Fe(III) with the chromogenic reagent di-2pyridyl ketone benzoylhydrazone (DPKBH) in stationary conditions as a flow injection process. The structural characterization and the stoichiometry of Cu(II)/DPKBH complex were achieved using infrared spectrometry, mass spectrometry, thermal and elementar analysis. Toe stoichiometry of the Fe(II) and Fe(III) complexes with DPKBH was studied by electrospray ionization mass spectrometry. The spectrophotometric method for the determination of Cu(II) with DPKBH was developed in stationary conditions and, after this, it was adapted to flow injection analysis, using a manual commutator. Subsequently, a spectrophotometric method was developed to determine Fe(II), Fe(III) and Cu(II) in the same sample, in stationary conditions, using masking reagents. This method was also adapted to flow injection analysis, using multicommutation and binary sampling. Finally, Cu(II), Fe(II) and Fe(III) were determined in sediments from Guarapiranga reservoir. The obtained results were compared with the ICP-OES standard methods, showing a good agreement into a 95% confidence level (t-test).

Zahlreiche Studien belegen, dass Maillard-Reaktionsprodukte (MRP) in vivo einen Einfluss auf den physiologischen Metallionenhaushalt haben können. Da bisher noch keine Korrelation zwischen dem Entstehen von definierten MRP und einem erhöhten Metallionenbindungsvermögen ermittelt werden konnte, war es das Ziel dieser Arbeit, die Komplexbildungseigenschaften der ausgewählten MRP Nε-Carboxymethyllysin, Isomaltol und Maltosin sowie deren Strukturanaloga Maltol, Deferipron, Mimosin und Pyridosin mit den physiologisch relevanten Metallionen Cu(II), Zn(II), Fe(III), Al(III) und Mn(II) zu untersuchen. Dazu wurden die MRP Nε-Carboxymethyllysin und Maltosin sowie die parallel untersuchten Substanzen Pyridosin, Maltosin-3-benzylether, Nα-Hippuryl- und Nα-Acetylmaltosin in ausreichender Menge und Reinheit synthetisiert. Dabei gelang es, für Maltosin und Pyridosin neue und effiziente Synthesewege zu entwickeln, bei welchen zum ersten Mal beide Substanzen gezielt aufgebaut wurden. Die Komplexbildungskonstanten der Liganden mit den Metallionen wurden pH-potentiometrisch bestimmt (I[KNO3] = 0,15 M; θ = 25 °C). Durch die Auswertung der Protonierungskonstanten der gebildeten Komplexe und das Vermessen geeigneter Derivate konnten für die untersuchten Komplexe zusätzlich die Koordinationsstellen der Liganden aufgeklärt werden. Die Untersuchungen zu den Komplexbildungseigenschaften bestätigten erstmals die Vermutung, dass MRP in der Lage sind, Metallionen zu binden. Dabei wurde weiterhin ermittelt, dass die Bindung von Cu(II) durch Nε-Carboxymethyllysin und von Fe(III), Al(III) und Cu(II) durch Maltosin durchaus von physiologischer Relevanz sind. Die Bedeutung der Ergebnisse wurde qualitativ durch Versuche mit Maltosin-derivatisiertem Rinderserumalbumin unterstrichen. Als besonderes Ergebnis der Arbeit ist herauszustellen, dass das MRP Maltosin und die Verbindung Pyridosin deutlich stabilere Komplexe mit Fe(III) bilden als das zur Fe(III)-Chelattherapie eingesetzte Medikament Deferipron. Diese festgestellte Eigenschaft bietet interessante Perspektiven für zukünftige Studien zur möglichen Anwendung von z. B. Maltosin als Pharmakon. / Several studies show that Maillard reaction products (MRP) may influence the physiological metal ion balance. But none of these studies prove a correlation between the formation of defined MRP and an enhanced metal ion binding. Therefore it was the aim of this work to investigate the complex formation characteristics of the selected MRP Nε-carboxymethyllysine, isomaltol and maltosine as well as the structural analogues maltol, deferiprone, mimosine and pyridosine with the physiological relevant metal ions Cu(II), Zn(II), Fe(III), Al(III) and Mn(II). For that purpose the MRP Nε-carboxymethyllysine and maltosine plus the parallel analysed substances pyridosine, maltosine-3-benzylether, Nα-hippuryl- and Nα-acetylmaltosine were synthesised. Thereby new and efficient syntheses for maltosine and pyridosine were developed. The stability constants of the ligands with the metal ions were determined by pH-potentiometry (I(KNO3) = 0,15 M; θ = 25 °C). Furthermore the donor atoms within the formed complexes were determined by the evaluation of the protonation constants of the formed complexes and by the analysis of adequate derivatives. The studies to the complex formation characteristics confirm for the first time the assumption, that MRP are able to form stable complexes with metal ions. Withal it was ascertained that the coordination of Cu(II) by Nε-carboxymethyllysine and of Fe(III), Al(III) and Cu(II) by maltosine may be of physiological relevance. The significance of the results was pointed out by experiments with maltosine derivatised bovine serum albumine. The fact that the MRP maltosine and the compound pyridosine form more stable complexes with Fe(III) as the medicament for the Fe(III) chelate therapy deferiprone is a particular result of this work. This property affords interesting perspectives for future studies about a possible appliance of e.g. maltosine as pharmaceutical.

Zahlreiche Studien belegen, dass Maillard-Reaktionsprodukte (MRP) in vivo einen Einfluss auf den physiologischen Metallionenhaushalt haben können. Da bisher noch keine Korrelation zwischen dem Entstehen von definierten MRP und einem erhöhten Metallionenbindungsvermögen ermittelt werden konnte, war es das Ziel dieser Arbeit, die Komplexbildungseigenschaften der ausgewählten MRP Nε-Carboxymethyllysin, Isomaltol und Maltosin sowie deren Strukturanaloga Maltol, Deferipron, Mimosin und Pyridosin mit den physiologisch relevanten Metallionen Cu(II), Zn(II), Fe(III), Al(III) und Mn(II) zu untersuchen. Dazu wurden die MRP Nε-Carboxymethyllysin und Maltosin sowie die parallel untersuchten Substanzen Pyridosin, Maltosin-3-benzylether, Nα-Hippuryl- und Nα-Acetylmaltosin in ausreichender Menge und Reinheit synthetisiert. Dabei gelang es, für Maltosin und Pyridosin neue und effiziente Synthesewege zu entwickeln, bei welchen zum ersten Mal beide Substanzen gezielt aufgebaut wurden. Die Komplexbildungskonstanten der Liganden mit den Metallionen wurden pH-potentiometrisch bestimmt (I[KNO3] = 0,15 M; θ = 25 °C). Durch die Auswertung der Protonierungskonstanten der gebildeten Komplexe und das Vermessen geeigneter Derivate konnten für die untersuchten Komplexe zusätzlich die Koordinationsstellen der Liganden aufgeklärt werden. Die Untersuchungen zu den Komplexbildungseigenschaften bestätigten erstmals die Vermutung, dass MRP in der Lage sind, Metallionen zu binden. Dabei wurde weiterhin ermittelt, dass die Bindung von Cu(II) durch Nε-Carboxymethyllysin und von Fe(III), Al(III) und Cu(II) durch Maltosin durchaus von physiologischer Relevanz sind. Die Bedeutung der Ergebnisse wurde qualitativ durch Versuche mit Maltosin-derivatisiertem Rinderserumalbumin unterstrichen. Als besonderes Ergebnis der Arbeit ist herauszustellen, dass das MRP Maltosin und die Verbindung Pyridosin deutlich stabilere Komplexe mit Fe(III) bilden als das zur Fe(III)-Chelattherapie eingesetzte Medikament Deferipron. Diese festgestellte Eigenschaft bietet interessante Perspektiven für zukünftige Studien zur möglichen Anwendung von z. B. Maltosin als Pharmakon. / Several studies show that Maillard reaction products (MRP) may influence the physiological metal ion balance. But none of these studies prove a correlation between the formation of defined MRP and an enhanced metal ion binding. Therefore it was the aim of this work to investigate the complex formation characteristics of the selected MRP Nε-carboxymethyllysine, isomaltol and maltosine as well as the structural analogues maltol, deferiprone, mimosine and pyridosine with the physiological relevant metal ions Cu(II), Zn(II), Fe(III), Al(III) and Mn(II). For that purpose the MRP Nε-carboxymethyllysine and maltosine plus the parallel analysed substances pyridosine, maltosine-3-benzylether, Nα-hippuryl- and Nα-acetylmaltosine were synthesised. Thereby new and efficient syntheses for maltosine and pyridosine were developed. The stability constants of the ligands with the metal ions were determined by pH-potentiometry (I(KNO3) = 0,15 M; θ = 25 °C). Furthermore the donor atoms within the formed complexes were determined by the evaluation of the protonation constants of the formed complexes and by the analysis of adequate derivatives. The studies to the complex formation characteristics confirm for the first time the assumption, that MRP are able to form stable complexes with metal ions. Withal it was ascertained that the coordination of Cu(II) by Nε-carboxymethyllysine and of Fe(III), Al(III) and Cu(II) by maltosine may be of physiological relevance. The significance of the results was pointed out by experiments with maltosine derivatised bovine serum albumine. The fact that the MRP maltosine and the compound pyridosine form more stable complexes with Fe(III) as the medicament for the Fe(III) chelate therapy deferiprone is a particular result of this work. This property affords interesting perspectives for future studies about a possible appliance of e.g. maltosine as pharmaceutical.

Les transitions de spin provoquent des changements de propriétés physiques des complexes de métaux du bloc d les subissant, notamment de leur structure et propriétés spectroscopiques. Ce mémoire porte sur la spectroscopie Raman de composés du fer(II) et du fer(III), pour lesquels on induit une transition de spin par variation de la température ou de la pression. Trois complexes de fer(II) de type FeN4(NCS)2 avec des comportements de transition de spin différents ont été étudiés : Fe(Phen)2(NCS)2 (Phen : 1,10-Phénanthroline), Fe(Btz)2(NCS)2 (Btz : 2,2’-bi-4,5-dihydrothiazine) et Fe(pyridine)4(NCS)2. Un décalage de l’ordre de 50 cm-1 est observable pour la fréquence d’étirement C-N du ligand thiocyanate des complexes FeN4(NCS)2, lors de la transition de spin induite par variation de la température ou de la pression. Il est possible d’utiliser cette variation de fréquence afin de tracer un profil de transition. Quatre complexes isomères de type FeL222(CN)2 (L222 : 2,13- diméthyl-6,9-dioxa-3,12,18-triazabicyclo[12.3.1]-octadéca-1(18),2,12,14,16-pentaène) ont également été étudiés. Un taux de décalage de l’ordre d’environ 0,03 cm-1/K est observé pour plusieurs bandes du complexe FeL222(CN)2. La bande à 1415 cm-1 disparaît à plus haute température au profit d’une bande à 1400 cm-1. Pour le complexe de chiralité R,R’, les bandes à 1008 cm-1 et 1140 cm-1 se déplacent vers des fréquences plus élevées à partir de 223 K. Les transitions de spin sont observées dans certains complexes de fer(III). Dans cette famille de composés, le complexe Fe(EtDTC)3 (EtDTC : N,N-diéthyldithiocarbamate) a été étudié . Aucun changement n’a été observé dans l’intensité des bandes d’étirement fer-soufre sur les spectres à température variable. Cependant, la bande Fe-S associée à la forme bas-spin à 530 cm-1 augmente en intensité au profit de la bande associée à la forme haut-spin à 350 cm-1 lors des mesures à haute pression, passant d’un rapport d’amplitude de 50% à pression ambiante à 80% à 21 kbar. Un dédoublement de la bande d’étirement C-N du ligand dithiocarbamate à 1495 cm-1 est également observé à des pressions supérieures à 5 kbar. Une comparaison des changements des fréquences de vibration de tous les complexes est effectuée. / AbstractSpin crossover processes lead to significant changes of molecular structures and spectroscopic properties measured for complexes of d-block transition metals. This thesis focuses on vibrational Raman spectroscopy of iron(II) and iron(III) compounds with spin transitions induced through temperature and pressure variations. Three iron(II) complexes of type FeN4(NCS)2 with different spin transition patterns have been studied: Fe(Phen)2(NCS)2 (Phen : 1,10-Phenanthroline), Fe(Btz)2(NCS)2 (Btz : 2,2’-bi-4,5- dihydrothiazine) and Fe(pyridine)4(NCS)2. A 50 cm-1 shift has been found for the C-N stretching frequency of the thiocyanate ligand in these compounds as a consequence of the spin transition induced by temperature or pressure. These frequency variations have been used to trace different transition profiles. Four different isomers of FeL222(CN)2 (L222 : [2,13-dimethyl-6,9-dioxa-3,12,18-triazabicyclo[12.3.1]-octadeca-1(18),2,12,14,16- pentaene]) type complexes have also been studied. A variation with temperature of approximately 0,03 cm-1/K has been observed for a few bands for the FeL222(CN)2 complex. A band at 1415 cm-1 decreases in intensity in favour of a band at 1400 cm-1 as temperature rises. The bands at 1008 cm-1 and 1140 cm-1 for the complex of R,R’ configuration shift to higher frequencies around 223 K. Spin transitions have also been investigated in some iron(III) complexes. In this family of compounds, the Fe(EtDTC)3 (EtDTC : N,N-diéthyldithiocarbamate) complex has been studied. No change has been observed in the intensity of the iron-sulphur stretching bands in spectra measured at variable temperature. However, at high pressure the low-spin Fe-S band at 530 cm-1 gains intensity compared to the high spin band at 350 cm-1. A splitting of the C-N stretching band of the dithiocarbamate ligand at 1495 cm-1 is observed at pressures above 5 kbar. A comparison of all changes in vibrational spectra is presented.