Spelling suggestions: "subject:"fiberoptics"" "subject:"flberoptics""
261 |
An Analysis of W-fibers and W-type Fiber PolarizersPaye, Corey 04 June 2001 (has links)
Optical fibers provide the means for transmitting large amounts of data from one place to another and are used in high precision sensors. It is important to have a good understanding of the fundamental properties of these devices to continue to improve their applications.
A specially type of optical fiber known as a W-fiber has some desirable properties and unique characteristics not found in matched-cladding fibers. A properly designed W- fiber supports a fundamental mode with a finite cutoff wavelength. At discrete wavelengths longer than cutoff, the fundamental mode experiences large amounts of loss. The mechanism for loss can be described in terms of interaction between the fiber's supermodes and the lossy interface at the fiber's surface. Experiments and computer simulations support this model of W-fibers.
The property of a finite cutoff wavelength can be used to develop various fiber devices. Under consideration here is the fiber polarizer. The fiber polarizer produces an output that is linearly polarized along one of the fiber's principal axes. Some of the polarizer properties can be understood from the study of W-fibers. / Master of Science
|
262 |
Long-Period Gratings as Immuno-Diagnostic biosensorsD'Alberto, Tiffanie Gabrielle 27 January 1997 (has links)
This research presents a novel biosensor which utilizes the refractive index sensitivity of a fiber optic long-period grating. The long period grating couples light from the forward propagating guided core mode of a single-mode fiber into discrete circularly symmetric cladding modes. Due to imperfections in the cladding surface, loss bands are seen in the transmission spectrum corresponding to the coupled wavelengths. Based on the phase-matching condition between the coupling and coupled modes, the loss bands shift with changes in the refractive index of the surrounding medium. The grating surface is chemically treated to covalently bond antibody to the cladding of the sensor. Treatment with the proper antigen increases the effective index seen by the cladding modes and affects the placement of the loss bands. This sensor demonstrates specific antigen binding capacity with loss band shifts of 10 nm or more. The device offers several advantages over the widely used Enzyme-Linked Immuno-Sorbent Assays. Diagnostic applications can be expanded beyond the tests presented here. / Master of Science
|
263 |
Imbedded optical fiber sensor of differential strain and temperature in graphite/epoxy compositesReddy, Mahesh January 1986 (has links)
A novel optical fiber sensor for the measurement of strain and temperature in graphite-epoxy composite materials using differential interferometry is described. The sensor uses two single-mode optical fiber waveguides imbedded within the composite during prepreg ply lay-up. Strain and temperature changes arc obtained as a motion of an optical interference pattern. Values arc calculated for the strain and temperature dependence of the fringe motion. The results of measurement which attempt to duplicate modeled loading conditions are reported and compared with analytical results. Analytical and experimental extensions of the technique to the measurement of the differential temperature in graphite-epoxy composite specimens during cure cycle processing are also considered. / M.S.
|
264 |
Axial strain effects on optical fiber mode patternsSrinivas, K. T. 12 April 2010 (has links)
Axial strain effects in multimode fibers are studied. A few-mode fiber is mounted on a tensile testing machine and strained at various speeds. The output of a monochromatic light source passing through it is monitored and recorded. Relations are noted between the light output the magnitude of tension and the rate of the applied axial strain. Flexural behavior of the optical fiber at various tensions is also studied by monitoring the modal output pattern. Relations are compiled to serve as a beginning to model these and other related modal effects. A theoretical background is also suggested to explain the observed effects. / Master of Science
|
265 |
Analysis and modeling of the effects of reflection induced noise on the performance of fiber optic communication systemsRaman, Ashok S. 12 March 2009 (has links)
Refractive index discontinuities in fiber optic transmission systems are known to cause deleterious effects. Non-negligible return losses associated with connectors and splices in present day systems cause intermittent error bursts and bit-error-rate floors in gigabit per second systems. These are attributed to the interferometric conversion of laser phase noise into signal-dependent intensity noise. This relative intensity noise (RIN) is substantially higher than the intrinsic RIN of the laser. The power spectral density of the RIN and its impact on the performance of incoherent on-off keying digital systems are calculated.
The combined effects of this noise and other degradations present in the system are studied using a simple model. It is shown that even though RIN is a bounded degradation, it, particularly in conjunction with other impairments, results in high and sometimes unacceptable power penalties. Previous analyses are extended to include the effects of multiple reflections from a single pair of reflectors, the effects of a multiplicity of reflection points and the combined effects of reflection-induced noise and other impairments. It is shown that the effect of multiple reflections, although having only a small influence on the reflection induced noise power, changes the distribution of the noise and has more serious system effects. In the case of a multiplicity of reflection points it is shown that for as few as four reflection points, the Gaussian approximation gives results in good agreement with results calculated from a Gram-Charlier series approximation to the actual distribution function. Power penalties as a function of reflection coefficient are calculated and compared using several different approximations for the distribution of the interferometric noise. The methodology presented, although applied specifically to reflection induced noise, is applicable to a broader class of problems in which there are other signal dependent noise phenomena. / Master of Science
|
266 |
High speed all-optical clock recovery and 3R regenerationMao, Weiming 01 October 2001 (has links)
No description available.
|
267 |
Birefringent single-arm fiber optic enthalpimeter for catalytic reaction monitoringRichmond, Eric William 28 July 2008 (has links)
Changes in heat content are almost universally associated with chemical reactions. Thermometry as an analytical tool has been extensively researched and developed. Finding solutions to problems involving thermal isolation, specificity, sensitivity, and cross-sensitivity remain as active areas of interest.
Fiberoptic interferometers, which use phase phenomena associated with propagating light, are extremely sensitive to heat. This research has focused on a special "birefringent" optical fiber. Two channels of information are generated in this single-fiber interferometer which correspond to the heat evolved from a catalytic reaction isolated on the fiber surface.
Because of the unique transduction mechanism associated with the "birefringent" optical fiber, this device is sensitive to heat and remarkably insensitive to pressure.
Details of the characterization and development of the birefringent optical fiber into a useful analytical probe are presented. / Ph. D.
|
268 |
Thermo-fluid modeling and robust control of modern optic fiber drawing processesWei, Zhiyong 04 1900 (has links)
Computational thermo-fluid models of a free surface flow under the dominant radiative transfer have been developed for the design and control of a modern optic fiber drawing process. Although modeling of the fiber drawing process has been of interest for the past three decades, most of the previous studies were limited to low draw speeds and small preforms. Large preforms drawn at high speeds have been used in modern fiber drawing systems to improve production efficiency and reduce cost. Several assumptions commonly made in previous studies have to be relaxed to address the new challenges. In this study, instead of using the Rosseland approximation, the radiative transfer equation (RTE) was solved directly for the radiation fluxes using the finite volume method (FVM). The complete two-dimensional free surface flow was simulated along with the coupling of the radiative transfer. Unlike most of the previous studies that only considered the furnace domain and that assumed the glass velocity at the exit, we included the post-chamber in the computation domain and predicted the fiber solidification location. Furthermore, the mixed convection of the air in the post-chamber was also considered, and was shown to have significant effects on the fiber solidification. On the basis of the computational model, a reduced order model (ROM) was developed for a mixed HŁ /LQG controller designed to regulate the fiber diameter under the effects of disturbances. The ROM was derived on the basis of the computational model. Optimal numerical eigenfunctions were obtained through the Karhunen-Loeve expansion using the computational model. The GalerkinŁ s method was then applied to obtain the state space ROM. The numerical model was shown to be efficient and was verified experimentally. The ROM characterizes the dynamics of the system accurately as compared with the computational model. The simulations using the full computational model showed that the closed-loop system is robust and superior to the open-loop system in the regulation of fiber diameter. The modeling and control methods can be applied to the design optimization and parameter regulation of the high-speed large-preform draw processes as well as other manufacturing processes that involve similar thermal-fluid transports.
|
269 |
Design, Analysis and Development of Sensor Coil for Fiber Optics GyroscopeKumar, Pradeep January 2011 (has links) (PDF)
Interferometer Fiber Optic Gyroscope (IFOG) has established as critical sensor for advance navigation systems. Sensor coil is known to be heart of IFOG. The bias drift and scale factor performance of IFOG depend on the sensor coil. The environmental perturbations like vibration, shock, temperature and magnetic field can affect the measured phase difference between the counter propagating beams, thereby introducing a bias error resulting in degradation of IFOG performance. In general these factors are both time varying and unevenly distributed throughout the coil producing a net undesirable phase shift due to variations in the optical light path, which is undistinguishable from the rotation induced signal. The development of sensor coil for high performance includes selection of optical fiber, spool material, coil winding technique and potting adhesive.
In the thesis, the effects of various perturbations like temperature, vibration and magnetic field on the sensor coil are analysed, which degrades the gyro performance. The effect of temperature and vibration can be reduced by proper selection of spool material, winding method and by applying adhesive during the winding of sensor coil. The effect of magnetic field can be reduced by using the high birefringence polarization maintaining fiber with shorter beat length, shielding the sensor coil and reducing the number of twist during the winding.
Design and fabrication of the sensor coil is done for control grade & navigation grade FOG with fiber length of 100 m and 1000 m respectively with the polarization maintaining fiber of two different manufacturer Fiber Core, UK and Nufern, USA selected based upon the beat length and Numerical Aperture so that sensor coil has minimum effect of magnetic field and the bending of fiber. Presently the spool material used is Aluminium alloy (HE15) for the ease of fabrication and easily availability of material. The Quadrupolar winding is done to reduce the thermal gradient effects. The indigenously developed special adhesive is applied layer by layer to reduce the environmental effects. In order to study the lifetime of sensor coil accelerated aging test (85°C, RH 85 %) for 30 days is also carried out.
|
270 |
In-fiber Optical Devices Based on D-fiberSmith, Kevin H. 16 March 2005 (has links) (PDF)
This dissertation presents the fabrication and analysis of in-fiber devices based on elliptical core D-shaped optical fiber. Devices created inside optical fibers are attractive for a variety of reasons including low loss, high efficiency, self-alignment, light weight, multiplexibility, and resistance to electromagnetic interference. This work details how D-fiber can be used as a platform for a variety of devices and describes the creation and performance of two of these devices: an in-fiber polymer waveguide and a surface relief fiber Bragg grating. In D-fiber the core is very close to the flat side of the ‘D’ shape. This proximity allows access to the fields in the fiber core by removal of the cladding above the core. The D-fiber we use also has an elliptical core, allowing for the creation of polarimetric devices. This work describes two different etch processes using hydrofluoric acid (HF) to remove the fiber cladding and core. For the creation of devices in the fiber core, the core is partially removed and replaced with another material possessing the required optical properties. For devices which interact with the evanescent field, cladding removal is terminated before acid breaches the core. Etching fibers prepares them for use in the creation of in-fiber devices. Materials are placed into the groove left when the core of a fiber is partially removed to form a hybrid waveguide in which light is guided by both the leftover core and the inserted material. These in-fiber polymer waveguides have insertion loss less than 2 dB and can potentially be the basis for a number of electro-optic devices or sensors. A polarimetric temperature sensor demonstrates the feasibility of the core replacement method. This work also describes the creation of a surface relief fiber Bragg gratings (SR-FBGs) in the cladding above the core of the fiber. Because it is etched into the surface topography of the fiber, a SR-FBG can operate at much higher temperatures than a standard FBG, up to at least 1100 degrees Celsius. The performance of a SR-FBG is demonstrated in temperature sensing at high temperatures, and as a strain sensor.
|
Page generated in 0.0319 seconds