Organic semiconductors have generated huge interested in recent years for low-cost and flexible electronics. Current and future device applications for semiconducting polymers include light-emitting diodes, thin-film transistors, photovoltaic cells, chemical and biological sensors, photodetectors, lasers, and memories. The performance of conjugated polymer devices depends on two major factors: the chain conformation in polymer film and the device architecture. Highly ordered chain structure usually leads to much improved performance by enhancing interchain interaction to facilitate carrier transport. The goal of this research is to improve the performance of organic devices with the nanoimprint lithography. The work begins with the controlling of polymer chain orientation in patterned nanostructures through nanoimprint mold design and process parameter manipulation, and studying the effect of chain ordering on material properties. After that, step-and-repeat thermal nanoimprint technique for large-scale continuous manufacturing of conjugated polymer nanostructures is developed. The actual chain orientation of molecular groups in polymer micro- and nanostructures patterning by nanoimprint is complicated. However, this information is crucial for intelligently controlling the electrical and photophysical properties of conjugated polymers by nanoimprint. Systematic investigation of polymer chain configuration by Raman spectroscopy is carried out to understand how nanoimprint process parameters, such as mold pattern size, temperature, and polymer molecular weight, affects polymer chain configuration. The results indicate that chain orientation in nanoimprinted polymer micro- and nanostructures is highly related to the nanoimprint temperature and the dimensions of the mold structures. The ability to create nanoscale polymer micro- and nanostructures and manipulate their internal chain conformation establishes an original experimental platform that enables studying the properties of functional polymers at the micro- and nanoscale and understanding their fundamental structure-property relationships. In addition to the impact on basic research, the techniques developed in this work are important in applied research and development. Large-area conjugated polymer micro- and nanostructures can be easily fabricated by thermal step-and-repeat nanoimprint for organic flat-panel displays, organic circuits and organic solar panels. The ability to manipulate chain orientation through nanoimprint presents a new route to fine-tune the electrical and photophysical properties of conjugated polymers, which can lead to improved performance for all organic electronics. The techniques developed here also allow for easy incorporation of other micro- and nanoscale soft functional polymers in miniaturized devices and systems for new applications in electronics, photonics, sensors and bioengineering.

Three-dimensional (3D) polymer structures are very attractive because the extra structural dimension can provide denser integration and superior performance to accomplish complex tasks. Successful fabrication of 3D multilayer microstructures in thermoplastic polymers using optimized nanoimprint lithography techniques such as layer-transfer and transfer-bonding methods are developed in this dissertation work. The capability and flexibility of the techniques developed here are expected to have deep impact on the applications of soft materials such as polymers including functional polymers in micro- and nanofabricated devices and systems. Although NIL technique is developing rapidly in recent years, there are still issues that need to be addressed for broader adoption of the nanoimprint technique. One of the problems is the residual layer that remains in the polymer pattern after nanoimprint. The conventional approach, oxygen reactive-ion-etching (RIE) process, to remove the residual layers, increases the cost and lowers the overall throughput of the nanoimprint process. More severely, it can degrade or even damage the functional polymers. In order to overcome these problems, new residual layer removal techniques need to be developed. In this dissertation, two methods are newly developed, which do not negatively affect the chemistry of the polymer materials. The techniques are suitable for all thermoplastic polymers, particularly functional polymers. Another advantage of nanoimprint is its ability to directly create functional polymers structures. This is because thermal nanoimprint only needs temperature and pressure for pattern replication, which both are benign to functional polymers. This feature combined with newly developed techniques such as transfer-bonding and residue removal techniques opens up the possibilities in nondestructive functional polymers patterning at the micro- and nanoscale for novel applications in electronics, optoelectronics, photonics and bioengineering. Finally, several applications of 3D multilayer structures fabricated by the techniques developed in this dissertation are demonstrated. The first application is a multilayer metal-dielectric-metal structure with embedded microfluidic channels. This structure can be used as an on-chip tunable filter for integrated microfluidic applications. The second application is a multilayer microfluidic channels in which each layer has a different channel size. This device can be used for particle separation and filtration based on lateral fluid flow.

No description available.

Ce travail a pour objectif de développer de nouveaux microcapteurs à onde acoustique de surface (SAW) capables de détecter le dioxyde de souffre (SO₂) à l’échelle de traces par l’intermédiaire d’une couche sensible à base d’un polymère fonctionnel. Une famille originale de cinq polyuréthaneimides (PUIs) à blocs contenant un nombre contrôlé de sites amines tertiaires de structures différentes a été synthétisée et caractérisée. Ces matériaux présentent des propriétés originales, en solution et à l’état solide, qui sont dues essentiellement à la présence des sites basiques et à la structure à blocs associant des blocs souples polyéthers et des blocs rigides en partie fluorés. Leur excellent caractère filmogène a permis leur application en tant que couche sensible au SO₂ sur des microcapteurs SAW. Deux structures de microcapteurs à onde de Love, bicouche et tri-couche, ont été développées en respectant les conditions de génération de l’onde. La structure bicouche comporte le Quartz-ST 90° comme substrat et l’un des PUIs joue le double rôle de couche guidante et sensible. Cette structure génère bien l’onde de Love mais elle présente une forte sensibilité à la température, inconvénient majeur pour les capteurs de gaz. L’ajout d’une couche guidante à base de ZnO, dans une structure tri-couche, a permis de rendre le dispositif peu sensible à la température et donc compatible avec l’application visée. Les résultats des tests de détection du SO₂ montrent que tous les PUIs étudiés contribuent à une amélioration de la sensibilité comparativement au dispositif sans couche polymère. La présence des sites amines tertiaires conduit à une amélioration importante de la sensibilité qui n’est pas seulement gouvernée par leur basicité mais également par leur encombrement stérique dont le rôle apparaît déterminant / This work aimed at developing new surface acoustic wave (SAW) microsensors capable of detecting traces of sulfur dioxide (SO₂) through a sensitive layer based on a functional polymer. An original family of five polyurethaneimide (PUI) block copolymers containing a controlled number of tertiary amine sites with different chemical structures was synthesized and characterized. These materials exhibited original properties in solution and solid state, which were mainly due to the presence of the basic sites and the block structure combining polyether soft blocks and partially fluorinated hard blocks. Their excellent film-forming character allowed their application as SO₂ sensitive layers on SAW microsensors. Two bi-layer and three-layer structures of Love wave microsensors were developed by respecting the conditions of the Love wave generation. The bi-layer structure included the Quartz ST-90° as the piezoelectric substrate and one of the PUIs acting as both guiding and sensitive layer. This structure generated the Love wave but its high sensitivity to temperature was a major drawback for gas sensors. The addition of a ZnO guiding layer in a three-layer structure led to a microsensor almost insensitive to temperature and thus compatible with the targeted application. The experimental results for SO₂ detection showed that all the PUIs contributed to improve the sensitivity compared to the device without polymer layer. The presence of tertiary amine sites led to a significant improvement in gas sensitivity which was not only governed by their basicity but also by their steric hindrance which played a determining role

La fabrication de surfaces polymères complexes avec des chimies et des topographies contrôlées à l’échelle micro et nanométrique est en pleine expansion en raison de la large gamme d'applications. Une nouvelle méthode prometteuse consiste à utiliser la photopolymérisation radicalaire contrôlée par les nitroxydes (NMP2) qui exploite une alcoxyamine photosensible (AA).Pour démontrer le potentiel de fabrication de surfaces de polymères complexes, un film de polymère a d'abord été formé en irradiant avec une formulation contenant un mélange de monomère acrylique et l’alcoxyamine. Ensuite, le dépôt d'un second monomère acrylique sur ce film durci peut redémarrer une nouvelle réaction de photopolymérisation du fait de la présence d'alcoxyamines à la surface. Les radicaux peuvent être réactivés par exposition aux lampes UV et permettent de commencer un nouveau procédé de polymérisation. Une autre alternative est d'utiliser l’écriture directe par laser pour produire des structures en 2D ou 2.5D de polymère, en déplaçant le faisceau laser sur la surface de l'échantillon.Un soin particulier a été axé sur l'impact de paramètres photoniques et chimiques sur le processus de repolymérisation. Les mécanismes moléculaires qui régissent la repolymérisation pourraient être déduits de cette étude.Certaines applications montrent le potentiel de l'alcoxyamine pour générer des surfaces hydrophiles / hydrophobes ou fluorescentes pour des applications avancées. / The fabrication of complex polymer surfaces with controled chemistry and topography at the micro and nanoscale has drawn a huge attention during the last years due to the wide range of applications. A promising new method consists in using the nitroxide mediated photopolymerization (NMP2). this method exploits a photosensitive alkoxyamine (AA) that creates latent reactive radical species.To demonstrate the potential for fabrication of complex polymer surfaces, a polymer film was first formed by irradiating with a formulation containing a mixture of acrylic monomer and alkoxyamine. Then, depositing a second acrylic monomer over this cured film can reboot a new photopolymerization reaction due to the presence of alkoxyamines at the surface. The radicals can be reactivated by exposure to UV and start a new polymerization process. Another alternative is to use UV-laser direct writing to produce 2D or 2.5D polymer structure by displacing the laser beam at the surface of the sample.A special care was focused on investigating the impact of photonic and chemical parameters on the extend of the repolymerization process. The molecular mechanisms governing the repolymerization could be deduced from this study.Some applications are provided showing the potential of the alkoxyamine for generating hydrophilic/hydrophobic or fluorescent surfaces for advanced applications.

The convergence of supramolecular and polymer sciences has led to the construction of analogs of traditional covalently-constructed polymeric structures and architectures by supramolecular methods. Host-guest complexations of polymers are also possible through well-defined synthesis of polymeric building blocks, for novel supramolecular polymers. Monotopic polymeric building blocks were synthesized by controlled radical polymerizations with a crown or paraquat initiator. The combinations of terminal and central functionalities of host and guest polymeric building blocks provided chain-extended and tri-armed homopolymers, and diblock and tri-armed copolymers. A supramolecular graft copolymer was formed from a main-chain poly(ester crown ether) and a paraquat terminated polystyrene. This comb-like copolymer was characterized by a large viscosity increase. A four-armed polystyrene-b-poly(n-butyl methacrylate) was synthesized from a pseudorotaxane macroinitiator derived from a complex of a crown-centered polystyrene and a dufunctional paraquat compound. A single peak with higher molecular weight from size exclusion chromatography proved the copolymer formation. Supramolecular interactions enhance the ionic conductivity of semi-crystalline ionic polymers; the ionic conductivity of a C₆-polyviologen and dibenzo-30-crown-10 mixture was 100 times higher than the polyviologen itself. However, ionic conductivities of amorphous polyviologens with polyethers were influenced only by glass transition temperature changes. New imidazolium ionic liquid monomers and imidazolium based polymers were synthesized for potential applications in electroactive devices, such as actuators. Structure-property relationships for pendant imidazolium polyacrylates and main-chain imidazolium polyesters were investigated. Terminal ethyleneoxy moeties enhanced ionic conduction 2~3 times; however, the alkyl chain length effect was negligible. For the imidazoium polyesters, higher ion conductivities result from 1) mono-imidazolium over bis-imidazolium, and 2) bis(trifluoromethanesulfonyl)imide polymers over hexafluorophosphate analogs. A semi-crystalline hexafluorophosphate polyester with C₁₀-sebacate-C₁₀, displayed 400-fold higher ionic conductivity than the amorphous C₆-sebacate-C₆ analogue, suggesting the formation of a biphasic morphology in the former polyester. New dicationic imidazolium salts have interesting features. 1,2-Bis[N-(N'-alkylimidazoilum)]ethane salts stack well in the solid state and possess multiple solid-solid phase transitions. They complex with dibenzo-24-crown-8 and a dibenzo-24-crown-8 based pyridyl cryptand with <i>K_a</i> = ~30 and 360 M¹, respectively. Some of these dicationic imidazolium salts have low entropies of fusion, typical of plastic crystals. These newly discovered imidazolium homopolymers have ionic conductivities up to 10⁴ (S cm⁻¹); however, better properties are still required. Well-designed block copolymers should provide both good electrical and mechanical properties from bicontinuous morphologies, such ion channels. / Ph. D.

Ce travail est axé sur l’amélioration des propriétés de biospécificité de sondes polymères fluorescentes, d’architectures contrôlées synthétisées par polymérisation RAFT, pour deux applications principales : le ciblage de tumeurs cancéreuses in vivo et le marquage de protéines pour des études in cellulo. Pour une imagerie ciblée de l’angiogénèse tumorale in vivo, des systèmes de ciblage multivalents à deux niveaux ont été élaborés en combinant à la fois i) des polymères bien contrôlés synthétisés par polymérisation RAFT et par le procédé PISA, ii) des clusters peptidiques tétravalents présentant une forte affinité pour les intégrines αvβ3 et iii) des fluorophores émettant dans le rouge lointain/proche-infrarouge pour un suivi in vitro et in vivo par microscopie optique. Deux types de sondes ont été synthétisés, des conjugués linéaires et des nanoparticules chevelues. La présentation multivalente du cluster peptidique permet d’augmenter considérablement l’affinité pour les intégrines αvβ3. Les premières évaluations biologiques indiquent une internalisation cellulaire des sondes polymères médiée par les clusters peptidiques ainsi qu’un marquage sélectif des cellules sur-exprimant les intégrines αVβ3. Pour le marquage de protéines, deux stratégies ont été explorées : le marquage de protéines natives par couplage covalent de sondes ω-fonctionnelles et le marquage de protéines recombinantes par des sondes porteuses d’un ligand spécifique. Pour la première stratégie, une fonction ester activé a été introduite en extrémité ω de sondes polymères par chimie thiol-ène pour marquer les résidus lysines des protéines natives. Cette approche a abouti à un poly-marquage difficile à contrôler mais offrant une brillance élevée. Pour la seconde stratégie, un groupement acide nitrilotriacétique (NTA) a été introduit en extrémité α des sondes polymères afin de marquer spécifiquement les protéines taguées Histidines. Cette approche a permis un marquage efficace de différentes protéines et permet de contrôler précisément le nombre de sondes par protéine ainsi que leur site de fixation sur la protéine. Finalement, suite à ces travaux, une nouvelle stratégie de synthèse de polymères séquencés par addition successive de monomères hétéro-bifonctionnels en utilisant des réactions chimiques très efficaces, sélectives et orthogonales a été proposée et validée. / This work is focused on improving the biospecificity properties of fluorescent polymer probes, with controlled architectures, for two main applications: the in vivo targeting of cancer tumors and the labeling of proteins for in cellulo studies. For a targeted imaging of tumor angiogenesis in vivo, targeting systems presenting two levels of multivalency were developed by combining both i) well-controlled polymers synthesized by RAFT polymerization and the PISA process, ii) peptide tetravalent clusters exhibiting a high affinity for the αvβ3 integrins and iii) fluorophores emitting in the far red / near-infrared for a monitoring in vitro and in vivo by optical microscopy. Two types of probes were synthesized, linear conjugates and hairy nanoparticles. Multivalent presentation of the peptide cluster induced a significant increase of the affinity for αvβ3 integrins. The first biological evaluations also indicated an efficient cellular internalization of polymer probes mediated by the peptide clusters and a selective labeling of cells over-expressing αvβ3 integrins. For protein labeling, two strategies were explored: the labeling of native proteins by covalent coupling of ω-functional polymer probes and the labeling of recombinant proteins by probes bearing a specific ligand at one chain-end. For the first strategy, an activated ester function was introduced at the ω-end of polymer probes by thiol-ene chemistry to label the lysine residues of native proteins. This approach resulted in a poly-labeling, difficult to control but providing highly bright bioconjugates. For the second strategy, a nitrilotriacetic acid group (NTA) was introduced at the α-end of polymers probes to specifically label Histidine tagged proteins. This approach enabled an efficient labeling of different proteins with a more precise control of the number of probes per protein and of the binding site. Finally, following this work, a new synthetic strategy of sequenced polymers by successive addition of hetero-bifunctional monomers using highly efficient, selective and orthogonal chemical reactions was proposed and validated.

Unravelling details of charge, structure and molecular interactions of functional polymer coatings defines an important analytical challenge that requires the extension of current methodologies. In this article we demonstrate how streaming current measurements interpreted with combined self consistent field (SCF) and soft surface electrokinetic theories allow the evaluation of the segment distribution within poly(ethylene oxide) (PEO) brushes beyond the resolution limits of neutron reflectivity technique.

Les travaux menés dans le cadre de cette thèse sont focalisés sur les procédés deréplication permettant la transformation des mélanges en composants par les technologiesen séquentiel ou bien en continu, selon les applications visées. Les développementsconcernent la mise en place et l’hybridation de différents procédés de micro-réplication(estampage à chaud de polymère thermoplastique et par laminage circulaire entre deuxrouleaux). Ces deux procédés sont développés et optimisés pour l’élaboration decomposants micro-structurés ou de microcomposants possédant des propriétésfonctionnelles mécaniques ou thermo-physiques requises à partir de différents mélangeschargés en poudres métalliques ou en nanotubes de carbone. Des exemples de réalisationde composants structurés, à base d’un système micro-fluidique possédant plusieurs canauxde 200 microns par 200 microns et des réservoirs de diamètre de 2 mm, sont prises commeexemple tout au long de ces travaux de cette thèse. Différents travaux de caractérisationsont été entrepris pour optimiser les procédés de micro-réplication par estampage à chaud etpar laminage circulaire entre deux rouleaux. / The Ph.D subject concerns the study of two micro-replication processes by hotembossing and roll to roll processes for thermoplastic polymers and loaded polymers withpowders or carbon nanotubes. The micro-replication processes, realized in sequential orcontinuous ways, use some different elaborated loaded feedstocks in order to obtainstructural components or micro-component with high aspect ratio and mechanical orthermo-physical properties.A chain combining hot embossing and roll embossing and powder metallurgy have beendeveloped in our lab and investigated. The different micro mould die cavities have beenrealized with different micro-manufacturing process, elastomeric mould has been obtainedby casting process. Finally, a metallic structured die cavity has been obtained by combininghot embossing and debinding and sintering stages. The second topic is the comparison ofmetallic die cavity mould obtained by roll embossing or rolls embossing. Two demonstratorshave been developed during the preparation of this Ph.D period: first a metallic micro-fluidicsystem with micro-structuration with diameter of 1 mm for the reservoir and 200 microns by200 microns for the channel have been realized and characterized by different methods.Secondly, some functional micro-component has been obtained with carbon nanotube andsome specific properties in terms of mechanic and thermo-physical properties have beencharacterized.