Pateikiami trys modulinių laukiamojo baldų variantai. Pagrindinė medžiaga, iš kurios padaryti baldai, yra plastikas. Plastikiniai baldai patogūs, juos paprasta prižiūrėti, lengva pernešti iš vienos vietos į kitą, ir jie yra pigesni. Norint pakeisti baldų išdėstymą nekils problemų. Šiame projekte nėra prisirišama prie plano, moduliniai baldai projektuoti oro uosto laukiamojo salei. Tačiau juos galima pritaikyti ir kitose viešose erdvėse kaip traukinių, autobusų stotis ir t.t. Atrinktos penkios idėjos, iš kurių trys galutinai išplėtotos. Visuose trijuose variantuose suprojektuotas šviečiantis modulis, centrinis akcentas su vandeniu, ir galimybe atsisėsti. Pirmajį variantą sudaro šviečiantis elementas bukam kampui, metalinis elementas stačiam kampui, plastikinis elementas smailiam kampui, plastikinė kilpa, šiukšliadėžė, centrinis akcentas. Centrinis akcentas jungia grindis ir lubas, jame įrengtas LED apšvietimas, tekančio vandens atkarpa. Antrajį variantą sudaro koriuko formos elementai – elementas atsisėsti be atlošo, šviečiantis elementas atsisėsti su atlošu, elementas su jame pasėta žole, šiukšliadėžė, centrinis akcentas. Centrinis akcentas suprojektuotas iš skirtingų dydžių korio formos marmuro plokštumų, jame įrengtas apšvietimas ir vandens telkinys. Trečiajį variantą sudaro sėdimoji dalis, šviečiantis elementas, šiukšliadėžė, centrinis akcentas. Centriniame akcente įrengtas fontanas, padaryti platesni fontano kraštai, kad būtų galima prisėsti. Po sėdimosios dalies... [toliau žr. visą tekstą] / Three variations of the modular lounge furniture are presented. The main material used to make furniture is plastic. Plastic furniture is comfortable and cheaper. It is easy to handle and move from one place to another. Therefore the change of furniture arrangement does not cause any problems. This project does not accurately follow the plan; modular furniture was designed for the airport departue lounge, but it can be adjusted to use in other public space, such as ralway or bus station, etc. Five ideas were chosen and three of them were developed till the end. All three variations include a luminous module as a central part with water and sitting possibility designed. The first variation consists of luminous element for a blunt corner, metal element for a sharp corner, plastic element for an acute corner, plastic loop, litterbin and a central part. Central part ties in a floor with a ceiling, it includes LED ilumination and running water segment installed. The second variation consists of the comb form elements – sitting element without a backrest, luminous sitting element with a backrest, element with a grass inside it, litterbin and a central part. Central part is designed using different sizes of the comb form marble flats with illumination and water body installed. The third variation consists of the sitting part, luminous element, litterbin and central part. Central part includes a fountain with wide edges to sit on. Illumination is installed under the sitting part.

The origins of the retail furniture industry commenced with family run stores, traditionally known as "momma and poppa" stores as they were entrenched in certain families. A feature of these stores was that they traded with people that they knew and enjoyed a great deal of loyalty. As the businesses grew there was a need to supply furniture to their clientele with a facility to repay the full price over a number of months. Such arrangements were typically concluded on trust as the customers were well known by the owners. The industry has evolved from this type of operation to a multi-billion rand industry. In terms of the size of business that is transacted and the size of the major furniture retailing organisations, it is simply not possible to continue doing business in accordance with the same ethos that prevailed during the early days. However, given the decentralised nature of the industry, the philosophy of knowing their customers has prevailed and this notion of wanting to conduct business on this basis has largely been responsible for a many critical functions remaining under the control of the individual stores within the broader network. In terms of the high volume of transactions that are currently concluded, it is extremely difficult to ensure that the application of policy and risk-based decisions are made on a consistent basis. From a cost effectiveness and productivity point of view, it is not possible to realise efficiencies and economies of scale that could be enjoyed if certain business processes were centralised. The intention of this research is to evaluate how the introduction of automated decision making business processes can contribute towards managing the organisation's exposure to risk with the view to achieving required levels of organizational performance and also sustainable value creation through a customer-centric philosophy. / Thesis (MBA)-University of Natal, Durban, 2003.

Klubinių baldų projektą sudaro fotelis, stalas ir pufas. Pasirinkta ši tema dėl tokių priežasčių: tokio tipo baldų pasirinkimas gan nedidelis, tokio tipo baldai salyginai brangūs ir ši tema man yra artima. Baldų formos ir spalvos įkvėptos gamtos – idėja kilo iš kokoso riešuto. Pagrindiniai kriterijai kuriais vadovautasi: funckionalumas, estetinė išvaizda, aukšta kokybė ir žema kaina. Sukurti baldai yra praktiški dėl keičiamų dažniausiai dėvimų dalių. Ištepus šias dalis ar mechaniškai pažeidus jas galima lengvai pakeisti, tai yra itin aktualu, nes nereikialauja papildomų išlaidų (transportavimas, baldo pervilkimas, darbo kaina). Dėl šios baldo savybės jį lengva pritaikyti prie interjero, gali būti keičiamos spalvos bei medžiagos (oda, audinys ir kt.). Fotelio galinėje dalyje pritvirtinta detalė yra tik mano pasiūlytas sprendinys, dėl baldo unikalios konstrukcijos, gali būti gaminami įvairūs kevalai, kitos formos detalės. Vietoje užrašo „COCONUT“ gali būti naudojami kiti užrašai, kuriuos siekiama populiarinti. Baigiamąjį darbą sudaro penki planšetai, aiškinamasis raštas, brėžinių aplankas, bukletas ir gaminys – fotelis. / Club furniture design project consists of a chair, a table and a pouffe. This theme was chosen for the following reasons: the choise of this type of furniture is relatively small, such furniture is expensive and the topic is close to me. The shape and the colour are inspired by nature – the coconut. The main criteria I followed in my diploma work were: functionality, aesthetic appearance, high quality and low price. The created furniture is practical because of the parts that can be replaced. These parts can be easily replaced when smeard or mechanically broken and that is really important because it does not require additional expenses (transportation, furniture reclothing, labour price). Due to these removable parts, the designed furniture can be easily adapted to any interior – the colour and the material of the parts can be changed (leather, cloth, ect.). The attached part in the back of the armchair is my solution, variuos parts of other form can be made and attached. Other notes that are wanted to be populatized can be used instead of „COCONUT“. The Bachelor work consists of five flatbeds, the note folder, the folder of drawings, brochure and the product – an armchair.

Thesis (J.C.L.)--Catholic University of America, 2002. / Includes bibliographical references (leaves 60-62).

Thesis (J.C.L.)--Catholic University of America, 2002. / Includes bibliographical references (leaves 60-62).

Thesis (MDes) - National School of Design, Swinburne University of Technology, 2008. / [Thesis submitted for degree of] Master of Design, to the [Faculty of Design], Swinburne University of Technology, 2008. Typescript. Bibliography: p. 159-165.

Thesis (M.S.)--Mississippi State University. Department of Forest Products. / Title from title screen. Includes bibliographical references.

Bakgrund: Globalisering och utveckling samt allt större konkurrens har ökat risker för många företag. Detta, tillsammans med de tidigare uppkomna finansiella kriserna i världen har gjort att vikten av riskhantering har ökat. Risk har blivit en betydelsefull faktor som varje företag borde ta hänsyn till och hantera utifrån egna behov. Med tillgång av råvaror, erfarenhet och kunskap är svensk möbelindustri en viktig industri för landets ekonomi där den största delen omfattar tillverkning av kontorsmöbler, vilket tillhör branschen “offentlig miljö”. Sveriges satsning på offentlig miljö är viktig för samhället på grund av allt snabbare utveckling och digitalisering där det uppstår ett allt större behov av kreativa och flexibla inredningslösningar på aktivitetsbaserade arbetsplatser. I och med ett allt större krav på kvalitet, design och hållbara produkter, ställs tillverkande möbelföretag inför olika risker som är branschspecifika och som måste behandlas. Det finns i dagsläget tre standarder ramverken som används för riskhantering, nämligen COSO ERM, ISO 31 000 samt FERMA. Ramverken är avsedda att hjälpa till företag att på ett systematiskt sätt hantera sina risker. Det som dock tidigare studier visar på är att dessa ramverken är alltför generella och inte anpassade till ett företags specifika behov. Syfte: Syftet med denna studie är:- att identifiera vilka risker och riskområden uppfattas som mest problematiska i dagsläget och i framtiden- att beskriva och analysera hur tillverkande företag inom svensk möbelindustrin hanterar risker i dagsläget samt- att utveckla en riskhanteringsmodell som är anpassad till tillverkande företag inom svensk möbelindustri. Metod: En kvalitativ intervjustudie som byggs på den teoretiska referensramen utifrån studiens nyckelord. Empirin till studien har inhämtats genom semistrukturerade intervjuer från sex företag av olika storlek som tillverkar kontorsmöbler till det offentliga rummet. Slutsats: Det insamlade empiriska materialet har gett mig en bild över olika risker som bran- schen står inför idag och som måste hanteras. Dessa risker är återförsäljare, beroendet av arki- tekter, ändrade trender inom inredning av offentliga rum samt i viss mån även problem med transport, det vill säga platta paket. Riskområden som branschen står inför i framtiden är, för- utom förändrade kontorstrender och brist på rätt kompetens, även cirkulär ekonomi, arkitek- ternas makt, återförsäljare samt platta paket. På grund av faktum att det inom branschen inte jobbas aktivt med riskhantering samt med nackdelar de befintliga riskhanteringsramverken besitter, har en anpassad riskhanteringsmodell för tillverkande företag inom branschen ut- vecklats. / Background: Globalization and development as well as increasing competition have increased risks for many companies. This, together with the previously emerging financial crises in the world, has led to the increased importance of risk management. Risk has become an important factor that each company should consider and manage based on its own needs. With the availability of raw materials, experience and knowledge, the Swedish furniture in- dustry is an important industry for the country's economy, most of which involves the manufacture of office furniture, which belongs to the industry line "public environment". Sweden's commitment to the public environment is important for society due to faster development and digitization, where there is an increasing need for creative and flexible interior design solutions for activity-based workplaces. With increasing demands on quality, design and sustainable products, manufacturing furniture companies are a subject to various risks that are industry-specific and therefore must be treated. There are currently three standard frameworks used for risk management, namely COSO ERM, ISO 31 000 and FERMA. The frameworks are intended to help companies manage their risks systematically. What previous studies indicate, however, are that these frameworks are too general and not adapted to a company's specific needs. Purpose: The purpose of this study is:-to identify which risks and risk areas are perceived as most problematic at present time and in the future,-to describe and analyze how manufacturing companies in the Swedish furniture industry cur- rently handle risks and-to develop a risk management model that is adapted to manufacturing companies in the Swe- dish furniture industry. Method: A qualitative interview study based on the theoretical reference frame and on a study keywords. Empire for the study has been obtained through semi structured interviews from six companies of various sizes that manufacture office furniture for public spaces. Conclusion: The collected empirical material has given me an insight of various risks that the industry faces today and which should be addressed. These risks are retailers, dependence on architects, changed trends in interior decoration of public spaces and to some extent transport problems, that is flat packages. Risk areas facing the industry in the future, apart from chang- ing office trends and lack of proper skilled staff, include circular economics, architects' power, retailers and flat-rate packages. Since the industry does not work actively with risk man- agement and with the disadvantages existing risk management frameworks possess, a custom- ized risk management model for manufacturing companies in the industry has been developed.

O setor de produção de móveis residenciais em madeira e derivados remodelou-se ao longo das duas últimas décadas, na década de 90 através da ampliação do comércio mundial de móveis e componentes, e a partir de 2000 pela ampliação do mercado interno. O presente trabalho pretendeu traçar um panorama atual desta produção no Brasil, voltada ao mercado interno, identificando sua base produtiva, fornecimento de insumos, produção e comercialização. Buscou-se reconhecer a dinâmica setorial e localizar no processo produtivo o desenvolvimento e apropriação de inovações. As investigações identificaram o paradigma produtivo atual (que tem como base o uso de painéis de madeira reconstituída, principalmente MDF e MDP), os critérios de diferenciação de produtos (por estratos sociais) e a interação entre os agentes. Procurou-se relacionar estas características à formação histórica do setor. / The branch of industry for the production of residential furniture made out of wood and derivatives was restructured on the last two decades, in the 90\'s through the widening of international trade, and from 2000 on, through the growth of the internal market. The purpose of this work is to present an overview of this production in Brazil, nowadays targeted to the internal market, and identify its productive basis, the supply of inputs and raw materials, production itself and sale. An attempt was made to follow the branch\'s dynamics, and to seek and localize the development and appropriation of innovative practices along the whole process. The investigations revealed: the current productive paradigm based on the generalized use of reconstituted wood (mainly medium density fiberboard - MDF, and medium density particleboard - MDP); the criteria for product differentiation according to social strata and the interaction between the agents involved in the productive process. There was also a concern in locating historically these recent changes undergone in the branch.

Made available in DSpace on 2015-04-13T12:17:15Z (GMT). No. of bitstreams: 1 Larissa albuquerque.pdf: 1586553 bytes, checksum: 8e9d51d41cb564fe61f0cfbad0f3889a (MD5) Previous issue date: 2013-11-12 / The present research aims to verify unadjusted wood residential tables and chairs anthropometric adaptation produced and commercialized in Manaus city, searching to contribute for the quality improvement of these products by the appropriate sizing considering the body segments dimensions for the local population. For this was realized bibliographic research to identify standards and scientific publications related for furniture sizing for Brazilian population, was realized also a quantitative-descriptive for hypothesis testing research aided for a form data collection application in the furniture factories mapped, allowing to collect information s about the dimensions used by the joiners in the furniture production, their knowledge about the use of the correct dimensions and the injuries that the incorrect use of these could result for people health. The data collected were analyzed with descriptive (mean, standard deviation, variance) and inferential (Student t test) statistical procedures, trying to verify if the dimensions collected in the furniture produced in the local furniture factories presented significant differences when related with the dimensions recommended in the generated tables, generated in this study. The tests results showed that the joiners doesn t uses the dimensions considered recommended for local population, neither were based on authors or scientifically publications in ergonomics area for residential wood chairs and tables. / A presente pesquisa visa verificar a adaptação antropométrica de mesas e cadeiras residenciais em madeira maciça sem ajustes produzidos e comercializados na cidade de Manaus, buscando contribuir para a melhoria da qualidade desses produtos por meio de seu dimensionamento adequado tendo em vista as medidas dos seguimentos corpóreos humanos para a população local. Para isso foram realizadas pesquisas bibliográficas para identificar normas e publicações científicas relacionadas ao dimensionamento de móveis para a população brasileira, também foi realizada uma pesquisa de campo quantitativo-descritiva de verificação de hipóteses auxiliada pela aplicação de um formulário de coleta de dados junto às marcenarias mapeadas, o que permitiu levantar informações a respeito das dimensões utilizadas pelos marceneiros na produção dos móveis aqui propostos, seu conhecimento técnico a cerca da utilização das medidas adequadas e os prejuízos que o uso incorreto das mesmas poderia gerar a saúde dos usuários. Os dados levantados foram analisados por meio de procedimentos de estatística descritiva (média, desvio padrão, variância) e inferencial (teste de t de Student), buscando verificar se as medidas encontradas nos móveis produzidos nas marcenarias locais apresentavam diferença significativa em relação aos recomendados nas tabelas, geradas neste estudo. Os resultados obtidos nos testes levaram a concluir que os marceneiros locais não utilizam as medidas consideradas recomendadas para a população local, tampouco se baseiam em autores ou publicações científicas na área da ergonomia para dimensionamento de mesas e cadeiras residenciais em madeira maciça.