<p>Over the past 20 years, the development in ComputationalElectromagnetics has produced a vast choice of methods based onthe large number of existing mathematical formulations of theMaxwell equations. None of them dominate over the others,instead they complement each other and the choice of methoddepends on the frequency range of the electromagnetic waves.This work is focused on the most popular method in the highfrequency scenario, namely the Geometrical Theory ofDiffraction (GTD). The main advantage of GTD is the ability topredict the electromagnetic field asymptotically in the limitof vanishing wavelength, when other methods, such as the Methodof Moments, become computationally too expensive.</p><p>The low cost of GTD is due to both the fact that there is noruntime penalty in increasing the frequency and that the raytracing, which GTD is based on, is a geometrical technique. Thecomplexity is then no longer dependent on electrical size ofthe problem but instead on geometrical sub problems which aremanageable. For industrial applications the geometricalstructures, with which the rays interact, are modelled bytrimmed Non-Uniform Rational B-Spline (NURBS) surfaces, themost recent standard used to represent complex free-formgeometries.</p><p>Due to the introduction of NURBS, the geometrical subproblems tend to be mathematically and numerically cumbersome,but they can be highly simplified by proper Object Orientedprogramming techniques. This allowed us to create a flexiblesoftware package, MIRA: Modular Implementation of Ray Tracingfor Antenna Applications, with an architecture that separatesmathematical algorithms from their implementation details andmodelling. In addition, its design supports hybridisationtechniques in combination with other methods such as Method ofMoment (MoM) and Physical Optics (PO).</p><p>In a first hybrid application, a triangle-based PO solveruses the shadowing information calculated with the ray tracerpart of MIRA. The occlusion is performed between triangles andtheir facing NURBS surfaces rather than between their facingtriangles, thus reducing the complexity. Then the shadowinginformation is used in an iterative MoM-PO process in order tocover higher frequencies, where the contribution of theshadowing effects, in the hybrid formulation, is believed to bemore significant.</p><p>Thesis presented at the Royal Institute of Technology ofStockholm in 2003, for the degree of Licentiate in ScientificComputing.</p>

The purpose of this study is to develop further knowledge of how specific educational attributes such as educational quality is affecting domestic terrorism activity. Using a time frame between 1999 and 2007, involving 133 countries. The research results indicate that educational quality does in most instances have a negative correlating effect on domestic terrorism activity. Though not to the same extent as the hypothesis suggests, where school completions rates appears to positively correlate with increased risk of domestic terrorism activity. However as theorized quality education proves to have more significant importance for a reduced risk of domestic terrorism compared to previous educational indicators that generally positively correlate with increased risk of domestic terrorism, when controlling for specific country conditions.

abstract: Two commercial blade antennas for aircraft applications are investigated. The computed results are compared with measurements performed in the ASU ElectroMagnetic Anechoic Chamber (EMAC). The antennas are modeled as mounted on a 13-inch diameter circular ground plane, which corresponds to that of the measurements. Two electromagnetic modeling codes are used in this project to model the antennas and predict their radiation and impedance characteristics: FEKO and WIPL-D Pro. A useful tool of WIPL-D Pro, referred to as WIPL-D Pro CAD, has proven to be convenient for modeling complex geometries. The classical wire monopole was also modeled using high-frequency methods, GO and GTD/UTD, mounted on both a rectangular and a circular ground plane. A good agreement between the patterns of this model and FEKO has been obtained. The final versions of the solvers used in this work are FEKO (Suit 6.2), WIPL-D Pro v11 and WIPL-D Pro CAD 2013. Features of the simulation solvers are presented and compared. Simulation results of FEKO and WIPL-D Pro have good agreements with the measurements for radiation and impedance characteristics. WIPL-D Pro has a much higher computational efficiency than FEKO. / Dissertation/Thesis / M.S. Electrical Engineering 2014

Over the past 20 years, the development in ComputationalElectromagnetics has produced a vast choice of methods based onthe large number of existing mathematical formulations of theMaxwell equations. None of them dominate over the others,instead they complement each other and the choice of methoddepends on the frequency range of the electromagnetic waves.This work is focused on the most popular method in the highfrequency scenario, namely the Geometrical Theory ofDiffraction (GTD). The main advantage of GTD is the ability topredict the electromagnetic field asymptotically in the limitof vanishing wavelength, when other methods, such as the Methodof Moments, become computationally too expensive. The low cost of GTD is due to both the fact that there is noruntime penalty in increasing the frequency and that the raytracing, which GTD is based on, is a geometrical technique. Thecomplexity is then no longer dependent on electrical size ofthe problem but instead on geometrical sub problems which aremanageable. For industrial applications the geometricalstructures, with which the rays interact, are modelled bytrimmed Non-Uniform Rational B-Spline (NURBS) surfaces, themost recent standard used to represent complex free-formgeometries. Due to the introduction of NURBS, the geometrical subproblems tend to be mathematically and numerically cumbersome,but they can be highly simplified by proper Object Orientedprogramming techniques. This allowed us to create a flexiblesoftware package, MIRA: Modular Implementation of Ray Tracingfor Antenna Applications, with an architecture that separatesmathematical algorithms from their implementation details andmodelling. In addition, its design supports hybridisationtechniques in combination with other methods such as Method ofMoment (MoM) and Physical Optics (PO). In a first hybrid application, a triangle-based PO solveruses the shadowing information calculated with the ray tracerpart of MIRA. The occlusion is performed between triangles andtheir facing NURBS surfaces rather than between their facingtriangles, thus reducing the complexity. Then the shadowinginformation is used in an iterative MoM-PO process in order tocover higher frequencies, where the contribution of theshadowing effects, in the hybrid formulation, is believed to bemore significant. Thesis presented at the Royal Institute of Technology ofStockholm in 2003, for the degree of Licentiate in ScientificComputing. / NR 20140805

L'objectif de cette thèse est de développer, caractériser et analyser l'imagerie radar en configuration bistatique. Dans le cadre de notre étude, nous nous plaçons dans le cas général d'une configuration bistatique sans condition sur la configuration d'acquisition. Nous avons alors développé un algorithme de reconstruction d'images tenant compte des polarisations d'émission et de réception. Ainsi, nous avons pu caractériser les images obtenues et donner l'expression des résolutions d'une image bistatique en fonction de la configuration d'acquisition. Ensuite, nous avons étudié les images bistatiques reconstruites lors de l'observation de cibles complexes ainsi que celles obtenues lors de la détection de cibles sur une surface océanique afin de les comparer avec celles d'une configuration monostatique. Les résultats ainsi obtenus permettent de valider l'intérêt de la configuration bistatique et de présenter les nouvelles perspectives qu'offre ce sujet de recherche en imagerie radar.

Eutypa dieback, one of several grapevine trunk diseases (GTDs), is of serious concern to the grape industry globally. This disease is caused by the fungus Eutypa lata but it is often seen in consortia growth with Phaeoacremonium minimum and Phaeomoniella chlamydospora. It is vital to understand the mechanisms for how this disease functions to develop control measures to combat it. Brown rot fungi are able to use a complex of low molecular weight (LMW) metabolites to induce a Fenton reaction to deconstruct woody tissue. These metabolites are part of a chelator mediated Fenton (CMF) chemistry that produces reactive oxygen species that are capable of depolymerizing wood polymers. We propose that a mechanism similar to CMF chemistry may be occurring in grapevine trunk disease pathogens. This thesis investigates how LMW metabolites produced by the fungi contribute to the disease and decay progression in GTDs. Research on Mite control in the laboratory with abamectin was also investigated, as research in this area was required when mites infested our fungal cultures and suitable laboratory controls were not available. Research on the GTD fungi was initiated by first examining whether metabolites produced by the three fungi can function in a manner to promote reactions like the CMF system. We separated and identified specific metabolites that potentially could contribute to CMF chemistry. We found that all three GTD fungi were able to produced LMW metabolites that promoted CMF chemistry, and we hypothesized that this mechanism contributes to processes leading to tissue necrosis in grapevine trunk wood. To explore the development of effective control measures based on this newly discovered mechanism for pathogenesis, we also explored the use of antioxidant/chelator compounds, BHA and BHT, in the control of the consortia fungi. Biocontrol organisms, Bacillus subtilis and Trichoderma atroviride, that produce antioxidants were also tested as biocontrols against the fungi involved in Eutypa Dieback disease. We found that BHA was highly effective in inhibiting fungal growth for all three fungi at concentrations higher than 0.5mM, and both B. subtilis and T. atroviride proved to be effective biocontrol agents in inhibiting E. lata, P. minimum, and P. chlamydospora.