The biggest limitation to conventional gas chromatography (GC) is limited peak capacity, making the analysis of complex mixtures a difficult or even impossible task. Comprehensive two-dimensional gas chromatography (GC×GC) significantly increases peak capacity and resolution, improves sensitivity and generates structured 3D chromatograms. This is achieved by connecting two columns coated with different stationary phases through a special interface (modulator). The interface samples the first column effluent and periodically injects fractions of this material, as narrow injection pulses, onto the second column for further separation. Commercial instruments achieve this with cryogenic agents. Since this expensive approach permits only in-laboratory analysis, the development of simple, economical and field-capable GC×GC systems is in demand. This report summarizes the fundamentals governing GC×GC separations and a brief history of technological advances in the field. It also documents the construction of a simple interface, devoid of moving parts and cryogenic consumables, and hence highly suitable for field analysis and monitoring applications. Evaluation of the interface suggests on-par performance with more complicated cryogenic modulators. GC×GC separations of technical mixtures of fatty acid methyl esters (FAMEs), common environmental pollutants (EPA 8270), polychlorinated biphenyls (PCBs), pesticides (toxaphene), as well as selected essential oils and major distillation fractions of crude oil indicate very good performance. Most notably, the interface prototype was applied for the first ever time-resolved on-site analysis of the semivolatile organic fraction of urban air particulate matter (PM2.5).

The biggest limitation to conventional gas chromatography (GC) is limited peak capacity, making the analysis of complex mixtures a difficult or even impossible task. Comprehensive two-dimensional gas chromatography (GC×GC) significantly increases peak capacity and resolution, improves sensitivity and generates structured 3D chromatograms. This is achieved by connecting two columns coated with different stationary phases through a special interface (modulator). The interface samples the first column effluent and periodically injects fractions of this material, as narrow injection pulses, onto the second column for further separation. Commercial instruments achieve this with cryogenic agents. Since this expensive approach permits only in-laboratory analysis, the development of simple, economical and field-capable GC×GC systems is in demand. This report summarizes the fundamentals governing GC×GC separations and a brief history of technological advances in the field. It also documents the construction of a simple interface, devoid of moving parts and cryogenic consumables, and hence highly suitable for field analysis and monitoring applications. Evaluation of the interface suggests on-par performance with more complicated cryogenic modulators. GC×GC separations of technical mixtures of fatty acid methyl esters (FAMEs), common environmental pollutants (EPA 8270), polychlorinated biphenyls (PCBs), pesticides (toxaphene), as well as selected essential oils and major distillation fractions of crude oil indicate very good performance. Most notably, the interface prototype was applied for the first ever time-resolved on-site analysis of the semivolatile organic fraction of urban air particulate matter (PM2.5).

<p>Soil bottles and soil slurry experiments were conducted to investigate the effect of some additives on the aerobic and anaerobic biodegradation of chlorinated aliphatic hydrocarbons; tetrachloroethylene (PCE), trichloroethylene (TCE) and dichloroethylene (DCE) in a contaminated soil from Startvätten AB Linköping Sweden. For the aerobic degradation study the soil sample was divided into two groups, one was fertilised. The two groups of soil in the experimental bottles were treated to varying amount of methane in pairs. DCE and TCE were added to all samples while PCE was found in the contaminated soil. Both aerobic and anaerobic experiments were conducted. For aerobic study air was added to all bottles to serve as electron acceptor (oxygen). It was observed that all the samples showed a very small amount of methane consumption while the fertilised soil samples showed more oxygen consumption. For the chlorinated compounds the expected degradation could not be ascertained since the control and experimental set up were more or less the same.</p><p>For the anaerobic biodegradation study soil slurry was made with different media i.e. basic mineral medium (BM), BM and an organic compound (lactate), water and sulphide, phosphate buffer and sulphide and phosphate buffer, sulphide and ammonia. To assure anaerobic conditions, the headspace in the experimental bottles was changed to N2/CO2. As for the aerobic study all the samples were added DCE and TCE while PCE was found in the contaminated soil. The sample without the soil i.e. the control was also given PCE. It was observed that there was no clear decrease in the GC peak area of the pollutants in the different media. The decrease in GC peak area of the pollutants could not be seen, this may be so because more susceptible microorganisms are required, stringent addition of nutrients and to lower the risk of the high concentration of PCE and petroleum products in the soil from Startvätten AB.</p>

Soil bottles and soil slurry experiments were conducted to investigate the effect of some additives on the aerobic and anaerobic biodegradation of chlorinated aliphatic hydrocarbons; tetrachloroethylene (PCE), trichloroethylene (TCE) and dichloroethylene (DCE) in a contaminated soil from Startvätten AB Linköping Sweden. For the aerobic degradation study the soil sample was divided into two groups, one was fertilised. The two groups of soil in the experimental bottles were treated to varying amount of methane in pairs. DCE and TCE were added to all samples while PCE was found in the contaminated soil. Both aerobic and anaerobic experiments were conducted. For aerobic study air was added to all bottles to serve as electron acceptor (oxygen). It was observed that all the samples showed a very small amount of methane consumption while the fertilised soil samples showed more oxygen consumption. For the chlorinated compounds the expected degradation could not be ascertained since the control and experimental set up were more or less the same. For the anaerobic biodegradation study soil slurry was made with different media i.e. basic mineral medium (BM), BM and an organic compound (lactate), water and sulphide, phosphate buffer and sulphide and phosphate buffer, sulphide and ammonia. To assure anaerobic conditions, the headspace in the experimental bottles was changed to N2/CO2. As for the aerobic study all the samples were added DCE and TCE while PCE was found in the contaminated soil. The sample without the soil i.e. the control was also given PCE. It was observed that there was no clear decrease in the GC peak area of the pollutants in the different media. The decrease in GC peak area of the pollutants could not be seen, this may be so because more susceptible microorganisms are required, stringent addition of nutrients and to lower the risk of the high concentration of PCE and petroleum products in the soil from Startvätten AB.

The master’s thesis was focused on the determination of persistent organic pollutants, namely polychlorinated biphenyls were detected (PCB 28, 52, 101, 118, 138, 153 and 180) and organochlorine pesticides. A total of 31 were evaluated contamination of organochlorine compounds. The level of contamination by organic pollutants were detected in 20 samples, 9 samples were sediments from the river Jevišovka, which is located in the South Moravia and 11 samples represented arable soil samples and were collected in the vicinity of this river. In the theoretical part are characterized both groups of substances, their fate in the environment and negative effects on living organisms. The experimental part focuses on the sampling procedures and processing for analysis by gas chromatography. There is described a complex analytical process involving the three extraction methods (accelerated solvent extraction, microwave extraction and ultrasonic extraction), extract purification and self-determination by gas chromatography with electron capture detector (GC / ECD). In the samples of sediment were detected these PCB congeners (138, 153 and 180) and organochlorine pesticides (b-HCH, HCB, p,p’-DDE, p,p’-DDD, p,p’-DDT and o,p’-DDT).. In soil samples were detected PCB congener 28 and organochlorine pesticides (HCB, b-HCH, heptachlor, aldrin, dieldrin, p,p’-DDE, p,p’-DDD, p,p’-DDT and o,p’-DDT).

The submitted thesis deals with determination of selected pesticides in water samples by gas chromatography. The target pesticides belong to the group of organophosphates (chlorpyrifos, diazinon, parathion, dimethoate, phosmet) and carbamates (carbofuran, aldicarb, methiocarb, pirimicarb, and propamocarb). In the theoretical part, the division of pesticides is stated, and their properties are described, as well as their fate in the environment and their negative effects. Then, the possibilities of analytical determination based on gas chromatography are characterized. The experimental part describes the treatment of the samples and their subsequent analysis. Solid phase extraction was chosen as the extraction technique. Two kinds of cartridges were optimized (Oasis HLB and Supelclean ENVI-18) in combination with various elution reagents. The most suitable combination was then used for processing of real samples of waste-water, which was taken from WWTP in Brno Modřice. For the final determination of the target compounds by gas chromatography, two types of detectors were used: mass spectrometer and an electron capture detector.

Exposomics applies metabolomics methods and technologies to the comprehensive analysis of all low molecular weight molecules (< 1.5 kDa) in complex biological samples to characterize the interaction between cellular metabolism and exogenous lifestyle exposures that determine health and quality of life. To fully access the diverse classes of biological molecules related to an individual’s metabolic profile, metabolomics frequently requires the use of complementary analytical platforms, and employs targeted and untargeted molecular profiling strategies to identify biomarkers that are clinically relevant to an individual’s health status. Chapter 2 describes a quinoline-based boronic acid biosensor for N-acetylneuraminic acid that undergoes a striking binding enhancement under strongly acidic conditions. For the first time, this work allows for direct analysis of acidic sugars with high selectivity when using UV absorbance or fluorescence detection based on formation of a highly stable boronate ester complex with metabolites containing an α-hydroxycarboxylate moiety. Chapter 3 describes a targeted analysis of 24 different organic contaminants using GC-MS that can serve as biomarkers of recent smoke exposure following search-and-rescue training exercises by firefighters located at three different sites across the province of Ontario. Importantly, skin and possible respiratory uptake of various polycyclic aromatic hydrocarbons, methoxyphenols, and resin acids was confirmed by peak excretion of several wood smoke biomarkers in urine within 6 h following acute exposure. Chapter 4 applied a cross-platform metabolomics strategy based on CE-MS and GC-MS in order to identify and validate dietary biomarkers in matching plasma and urine samples collected from healthy participants in the pilot Diet and Gene Interaction Study (DIGEST). For the first time, we demonstrate that a panel of metabolites can serve as reliable biomarkers following contrasting Prudent and Western diets over 2 weeks of food provisions, which correlated well with self-reported diet records. This work paves the way for the development of objective biomarkers for accurate assessment of wood smoke exposures, as well as complex dietary patterns as required for new advances in occupational health and nutritional epidemiology. / Dissertation / Doctor of Philosophy (PhD) / Exposomics is an emerging multidisciplinary science aimed at deciphering the complex interactions that impact human health and gene expression, such as lifestyle choices (i.e., habitual diet) and lifelong environmental exposures. There is growing interest in identifying biomarkers that can be readily measured for chronic disease prevention given an alarming global prevalence of obesity and cardiometabolic disorders, including heart disease, type 2 diabetes and cancer. The research in this thesis focuses on developing new analytical methods for identifying and quantifying metabolites that may allow for better assessments of human health, and has contributed to the development of novel biosensors for the targeted analysis of N-acetylneuraminic (sialic) acid and related acidic sugars, as well as high resolution methods for broad spectrum analysis of biotransformed organic contaminants from smoke exposure by GC-MS, and plasma and urinary metabolites that differentiate contrasting Prudent and Western diets and correlate well with self-reported diet records.

As aves marinhas são sensíveis às alterações em todos os níveis tróficos, decorrentes de variações na disponibilidade de presas e contaminação por alguns compostos, capazes de se acumular nos tecidos dos organismos e magnificar-se através da cadeia trófica. As ilhas oceânicas brasileiras abrigam importantes colônias reprodutivas de aves marinhas e, apesar de serem consideradas locais remotos, estão sujeitas à contaminação decorrente de atividades humanas. Este trabalho avaliou a presença de poluentes orgânicos persistentes (POPs) em sangue, uma matriz não-destrutiva, de seis espécies de aves marinhas no Arquipélago de São Pedro e São Paulo e na Ilha da Trindade, que possibilita o monitoramento destes indivíduos ao longo dos anos. Os resultados indicaram que os principais POPs detectados no sangue (em ng g-1 de massa úmida) foram PCBs (0,05 a 55,09), DDTs (0,01 a 17,36) e Mirex (0,01 a 5,53). A migração influenciou nos altos níveis de POPs encontrados em Pterodroma arminjoniana e a massa (g) média dos indivíduos apresentou uma forte correlação negativa com as concentrações dos compostos predominantes no sangue. O sexo das aves não contribuiu significativamente nas concentrações de POPs em espécies monotípicas, exceto para a espécie Sula leucogaster que apresenta dimorfismo sexual acentuado. O comportamento alimentar, avaliado através da análise de isótopos estáveis de carbono e de nitrogênio (&delta;13C e &delta;15N), bem como as condições biológicas de cada animal contribuíram para explicar as variações nos perfis de contaminação entre as diferentes espécies. No geral, observou-se que as concentrações de POPS nos dois locais apresentaram valores baixos e similares sugerindo a via atmosférica como principal mecanismo de entrada desses contaminantes para estas regiões. Os resultados inéditos de POPs em sangue das aves marinhas nas duas mais recentes unidades de conservação marinhas criadas no Brasil, podem contribuir como referência para o monitoramento desses compostos em longo-prazo nessas regiões. / Seabirds are sensitive to changes at all trophic levels, due to variations in prey availability and contamination by some compounds, which can be accumulated in the tissues of organisms and to be magnified through the trophic chain. The Brazilian oceanic islands harbor important seabird breeding colonies and, although they are considered remote sites, they are subject to contamination from human activities. This work evaluated the presence of Persistent Organic Pollutants (POPs) in blood, a non-destructive matrix, of six species of seabirds in the São Pedro and São Paulo Archipelago (SPSPA) and Trindade Island (TI), that allows the monitoring of these individuals over the years. The results indicated that the major POPs detected in blood (ng g-1 in wet weight) were PCBs (0.05 to 55.09), DDTs (0.01 to 17.36) and Mirex (0.01 to 5,53). Migration influenced the high levels of POPs found in Pterodroma arminjoniana and the mean mass (g) of the individuals drove a strong negative correlation with the concentrations of the predominant compounds in the blood. The gender of the individuals did not contribute significantly to the concentrations of POPs in monotypic species, except for the species Sula leucogaster that presents marked sexual dimorphism. The feeding behavior was evaluated through the analysis of stable isotopes of carbon and nitrogen (&delta;13C and &delta;15N) as well as the biological conditions of each animal contributed to explain the variations in the contamination profiles between the different species. In general, we observed that POPS concentrations at both sites presented low and similar values suggesting the atmospheric transport as the main input mechanism of these compounds for these regions. The unpublished results of POPs, in blood of seabirds from the two most recent marine conservation units created in Brazil, can contribute as reference values for their long-term monitoring in those regions.

Submitted by Biblioteca da Faculdade de Farmácia (bff@ndc.uff.br) on 2018-03-05T14:14:06Z No. of bitstreams: 1 JÚLIA GONÇALVES MAYER.pdf: 2883327 bytes, checksum: 6ae955490e1664e27d2c9669ad07a02c (MD5) / Made available in DSpace on 2018-03-05T14:14:06Z (GMT). No. of bitstreams: 1 JÚLIA GONÇALVES MAYER.pdf: 2883327 bytes, checksum: 6ae955490e1664e27d2c9669ad07a02c (MD5) / Coordenação de Aperfeiçoamento de Pessoal de Nível Superior / Os métodos analíticos utilizados para medir o percentual de ácido graxo trans (AGT) em alimentos envolvem cromatografia em fase gasosa com detecção de ionização de chama (CG-DIC), espectrometria de massas (CG-EM) e espectroscopia no infravermelho com transformada de Fourier e refletância total atenuada (FT-IR-ATR). O presente estudo teve como objetivo investigar a viabilidade e a aplicabilidade do uso das técnicas de FT-IR-ATR, sem extração, com extração prévia da gordura e após hidrólise e metilação dos ácidos graxos, para avaliar o conteúdo de AGT em biscoitos recheados e comparar os resultados obtidos com os encontrados para a determinação de ácido elaídico pela técnica de CG-EM. Foram escolhidas 9 marcas de biscoitos recheados sabor chocolate e 1 pacote de gordura vegetal hidrogenada, para ser usada como padrão secundário para análise de AGT por FT-IR-ATR. As amostras foram analisadas, inicialmente, quanto aos seus conteúdos de umidade e lipídeos totais. Para todas as amostras não foi observada concentração de umidade superior a 6,03 g/100 g. Os lipídeos totais variaram de 12,51±0,58 a 23,84±0,09 g/100 g. A presença de AGT foi identificada por FT-IR-ATR pela visualização da banda próxima a 966 cm−1 e confirmada com adição de padrão às amostras. Ao analisar as amostras de biscoito homogeneizadas e sem outro preparo, não foi viável a utilização do método de FT-IR-ATR, visto que a absorção de radiação infravermelha de substâncias da amostra se sobrepõe à absorção na região das ligações duplas trans, o que demonstra que a matriz do alimento pode influenciar na análise. Quanto a presença dos AGT, ácido elaídico (C18:1, n-9 trans) foi identificado e confirmado em todas as amostras através de CG-EM. Ao comparar a quantificação pelos métodos CG-EM e FT-IR-ATR em amostras de extratos e na forma de ácidos graxos metilados (FAME), foram observadas concentrações baixas de ácido elaídico/ácidos graxos trans (de 0,03±0,01 a 0,86±0,01 g/100 g de biscoito) obtidas pelos diferentes métodos. Não foram encontradas diferenças significativas entre as concentrações de AGT determinadas pelos três métodos testados para oito das nove amostras analisadas. O presente trabalho mostrou que a técnica de FT-IR-ATR, analisando o extrato lipídico e as amostras em forma de FAME foi adequado para estimar os teores de AGT em biscoito recheado de chocolate, visto que proporciona uma análise mais rápida, com um menor número de etapas e menor consumo de reagentes em relação às análises por CG-EM / The analytical methods used to measure the percentage of trans fatty acids in foods involve gas chromatography with flame ionization detection (GC-FID), mass spectrometry (GC-MS) and attenuated total reflectance fourier transform infrared spectroscopy (ATR-FT-IR). The aim of the present study was to investigate the feasibility and applicability of ATR-FT-IR techniques, without extraction, with previous extraction of fat and after hydrolysis and methylation of fatty acids to evaluate the content of TFA in filled biscuits, and compare the results obtained with those found for the determination of elaidic acid by the CG-MS technique. Were chosen 9 marks of chocolate filled biscuit and 1 packet of hydrogenated vegetable fat to be used as a secondary standard for AGT analysis by ATR-FT-IR. The samples were initially analyzed for their moisture contents and total lipids. For all samples, no moisture content higher than 6.03 g/100 g. Total lipids ranged from 12.51 ± 0.58 to 23.84 ± 0.09 g/100g. The presence of TFA was identified by ATR-FT-IR through the visualization of the band near 966 cm−1 and confirmed with addition of standard to the samples. When analyzing the homogenized cookie samples and without further preparation, the use of the ATR-FT-IR method was not feasible because the absorption of infrared radiation from sample substances overlaps the absorption in the region of the trans double bonds, which demonstrates that the food matrix may influence the analysis. Regarding the presence of TFA, elaidic acid (C18: 1, n-9 trans) was identified and confirmed in all samples by GC-MS. When comparing quantification by GC-MS and ATR-FT-IR in samples of extracts and in the form of fatty acids methly esters (FAME), low concentrations of elaidic acid / trans fatty acids were observed (0.03 ± 0.01 to 0.86 ± 0.01 g / 100 g of biscuit) obtained by the different methods. No significant differences were found between the concentrations of TFA determined by the three methods tested for eight of the nine samples analyzed. The present study showed that the ATR-FT-IR technique, analyzing the lipid extract and the samples in the form of FAME, was adequate to estimate the TFA contents in chocolate filled biscuit, because it provides a faster analysis with a smaller number of steps and lower toxic chemicals in relation to GC-MS analyzes

Diploma thesis summarizes available information about chiral analysis of synthetic musk compounds in the aquatic environment. In the theoretical part of the thesis chirality and importance of chiral analysis by means of examples of different environmental pollutants is documented. Further consideration is aimed on musk compounds, their classification, characteristics and their fate in the environment, especially in the aquatic environment. After that methods for chiral analysis of synthetic musk compounds are reviewed. The aim of the experimental part of this diploma thesis was to carry out the determination of thirteen representatives of musk compounds (2-cyclohexylethanol, allylcyklohexylpropionate, Arocet, Aroflorone, Citronellol, Fresco Menthe, Galaxolide, hexyl cinnamic aldehyde, HSA, isoamylsalicylate, isobornylacetate, Lilial and Linalool), out of which some compounds are chiral and some are achiral. For the analysis samples of wastewater from the wastewater treatment plant Brno - Modřice were taken. Target compounds were isolated by solid phase microextraction (SPME) and were subsequently analyzed by gas chromatography with flame ionization and mass spectrometric detection. On the basis of data evaluation the removal efficiency forgiven musk compounds in the wastewater treatment plant was assessed.