No description available.

Silicon Oxide/Oxynitride (SiO2/SiON) has been the mainstream material used for gate dielectric for MOS transistors for the past 30 years. The aggressive scaling of the feature size of MOS transistor has limited the ability of SiO2/SiON to work effectively as the gate dielectric to modulate the conduction of current of MOS transistors due to excess leakage current dominated by direct quantum tunneling. Due to this constraint, alternative gate dielectric/high-k is being employed to reduce the leakage current in order to maintain the rate of scaling of MOS transistors. However, the cost involved in the implementation of these new gate dielectric materials are high due to the requirements of a change in the process flow for device fabrication. This work presents the results of a novel processing method implementing the use of rapid thermal processing (RTP) on conventional SiO2/SiON gate dielectric to reduce the gate leakage current by three to five orders of magnitude. Electrical properties of the effect were characterized on fabricated MOS capacitors using semiconductor parameter analyzer and LCR meter. Material characterization was performed using FT-IR to understand the mechanism involved in this novel processing method, named PECE (Phonon-Energy-Coupling-Enhancement). By implementing this novel process, the use of SiO2/SiON as gate dielectric can be scaled further in conventional process flow of device fabrication.

In decades, the tremendous development of integrated circuits industry could be mostly attributed to SiO2, since its satisfactory properties as a gate dielectric candidate. The effectivity of SiO2 has been challenged since dielectric layer was scaled down below 3nm, when the gate leakage current of SiO2 became unacceptable. Institution to silicon-based CMOS techniques were proposed, but they have their own limitations. Nowadays, materials with high dielectric constants are mainstream gate dielectric materials in industry, but a SiO2 interfacial layer is still necessary to avoid gap between gate dielectric layer and Si substrate, and to minimize interface trap charges. In this thesis work, by applying lateral heating process on Si wafer with thermally grown ultrathin SiO2, the gate leakage current density could be reduced by 3-5 order of magnitude. MOS capacitors were fabricated, and electrical properties were tested with semiconductor parameter analyzer and LCR meter. The underlying mechanism of this appealing phenomenon was explored. Since unacceptable gate leakage current is one of the main reasons which prevent the scaling trend in semiconductor industry, this technology brings a possibility to post-pone the end of scaling trend, and pave a way for extensive application in industry. A new method for fabrication of MOS capacitors metal gate has been developed, and lift-off process has been replaced by wet etching process. This method provides better contact between dielectric layer and metal gate, meanwhile much easier operation.

The major sources of power dissipation in a nanometer CMOS circuit are capacitive switching, short-circuit current, static leakage and gate oxide tunneling. However, with the aggressive scaling of technology the gate oxide direct tunneling current (gate leakage) is emerging as a prominent component of power dissipation. For sub-65 nm CMOS technology where the gate oxide (SiO2) thickness is very low, the direct tunneling current is the major form of tunneling. There are two contribution parts in this thesis: analytical modeling of behavioral level components for direct tunneling current and propagation delay, and the reduction of tunneling current during behavioral synthesis. Gate oxides of multiple thicknesses are useful in reducing the gate leakage dissipation. Analytical models from first principles to calculate the tunneling current and the propagation delay of behavioral level components is presented, which are backed by BSIM4/5 models and SPICE simulations. These components are characterized for 45 nm technology and an algorithm is provided for scheduling of datapath operations such that the overall tunneling current dissipation of a datapath circuit under design is minimal. It is observed that the oxide thickness that is being considered is very low it may not remain constant during the course of fabrication. Hence the algorithm takes process variation into consideration. Extensive experiments are conducted for various behavioral level benchmarks under various constraints and observed significant reductions, as high as 75.3% (with an average of 64.3%).

No description available.

The progress of the silicon-based complementary-metal-oxide-semiconductor (CMOS) technology is mainly contributed to the scaling of the individual component. After decades of development, the scaling trend is approaching to its limitation, and there is urgent needs for the innovations of the materials and structures of the MOS devices, in order to postpone the end of the scaling. Atomic layer deposition (ALD) provides precise control of the deposited thin film at the atomic scale, and has wide application not only in the MOS technology, but also in other nanostructures. In this dissertation, I study rapid thermal processing (RTP) treatment of thermally grown SiO2, ALD growth of SiO2, and ALD growth of high-k HfO2 dielectric materials for gate oxides of MOS devices. Using a lateral heating treatment of SiO2, the gate leakage current of SiO2 based MOS capacitors was reduced by 4 order of magnitude, and the underlying mechanism was studied. Ultrathin SiO2 films were grown by ALD, and the electrical properties of the films and the SiO2/Si interface were extensively studied. High quality HfO2 films were grown using ALD on a chemical oxide. The dependence of interfacial quality on the thickness of the chemical oxide was studied. Finally I studied growth of HfO2 on two innovative interfacial layers, an interfacial layer grown by in-situ ALD ozone/water cycle exposure and an interfacial layer of etched thermal and RTP SiO2. The effectiveness of growth of high-quality HfO2 using the two interfacial layers are comparable to that of the chemical oxide. The interfacial properties are studied in details using XPS and ellipsometry.

With the MOSFET scaling practice, the performance of IC devices is improved tremendously as we experienced in the last decades. However, the small semiconductor devices also bring some drawbacks among which the high gate leakage current is becoming increasingly serious. This thesis work is focused on the of gate leakage current reduction in thin oxide semiconductor devices. The method being studied is the Phonon Energy Coupling Enhancement (PECE) effect induced by Rapid Thermal Processing (RTP). The basic MOS capacitors are used to check improvements of leakage current reduction after appropriate RTP process. Through sets of experiments, it is found that after RTP in Helium environment could bring about four orders reduction in gate leakage current of MOS capacitors.

Les transistors ayant un faible niveau de bruit à basse fréquence, une faible puissance de dissipation et fonctionnant à basse température (≤ 4.2 K) sont actuellement inexistants alors qu’ils sont très demandés pour la réalisation de préamplificateurs à installer au plus près des détecteurs ou des dispositifs à la température de quelques dizaines de mK, dans le domaine de l’astrophysique, de la physique mésoscopique et de l’électronique spatiale. Une recherche menée depuis de nombreuses années au LPN vise à réaliser une nouvelle génération de HEMTs (High Electron Mobility Transistors) cryogéniques à haute performance pour répondre à ces demandes. Cette thèse, dans le cadre d’une collaboration entre le CNRS/LPN et le CEA/IRFU, a pour but la réalisation de préamplificateurs cryogéniques pour des microcalorimètres à 50 mK.Les travaux de cette thèse consistent en des caractérisations systématiques des paramètres électriques et des bruits des HEMTs (fabriqués au LPN) à basse température. En se basant sur les résultats expérimentaux, l’une des sources de bruit à basse fréquence dans les HEMTs a pu être identifiée, c’est-à-dire la part du courant tunnel séquentiel dans le courant de fuite de grille. Grâce à ce résultat, les hétérostructures ont été optimisées pour minimiser le courant de fuite de grille ainsi que le niveau de bruit à basse fréquence. Au cours de cette thèse, différentes méthodes spécifiques ont été développées pour mesurer de très faibles valeurs de courant de fuite de grille, les capacités du transistor et le bruit 1/f du transistor avec une très haute impédance d’entrée. Deux relations expérimentales ont été observées, l’une sur le bruit 1/f et l’autre sur le bruit blanc dans ces HEMTs à 4.2 K. Des avancées notables ont été réalisées, à titre d’indication, les HEMTs avec une capacité de grille de 92 pF et une consommation de 100 µW peuvent atteindre un niveau de bruit en tension de 6.3 nV/√Hz à 1 Hz, un niveau de bruit blanc de 0.2 nV/√Hz et un niveau de bruit en courant de 50 aA/√Hz à 10 Hz. Enfin, une série de 400 HEMTs, qui répondent pleinement aux spécifications demandées pour la réalisation de préamplificateurs au CEA/IRFU, a été réalisée. Les résultats de cette thèse constitueront une base solide pour une meilleure compréhension du bruit 1/f et du bruit blanc dans les HEMTs cryogéniques afin de les améliorer pour les diverses applications envisagées. / Transistors with low noise level at low frequency, low-power dissipation and operating at low temperature (≤ 4.2 K) are currently non-existent, however, they are widely required for realizing cryogenic preamplifiers which can be installed close to sensors or devices at a temperature of few tens of mK, in astrophysics, mesoscopic physics and space electronics. Research conducted over many years at LPN aims to a new generation of high-performance cryogenic HEMTs (High Electron Mobility Transistors) to meet these needs. This thesis, through the collaboration between the CNRS/LPN and the CEA/IRFU, aims for the realization of cryogenic preamplifiers for microcalorimeters at 50 mK.The work of this thesis consists of systematic characterizations of electrical and noise parameters of the HEMTs (fabricated at LPN) at low temperatures. Based on the experimental results, one of the low-frequency-noise sources in the HEMTs has been identified, i.e., the sequential tunneling part in the gate leakage current. Thanks to this result, heterostructures have been optimized to minimize the gate leakage current and the low frequency noise. During this thesis, specific methods have been developed to measure very low-gate-leakage-current values, transistor’s capacitances and the 1/f noise with a very high input impedance. Two experimental relationships have been observed, one for the 1/f noise and other for the white noise in these HEMTs at 4.2 K. Significant advances have been made, for information, the HEMTs with a gate capacitance of 92 pF and a consumption of 100 µW can reach a noise voltage of 6.3 nV/√ Hz at 1 Hz, a white noise voltage of 0.2 nV/√ Hz, and a noise current of 50 aA/√Hz at 10 Hz. Finally, a series of 400 HEMTs has been realized which fully meet the specifications required for realizing preamplifiers at CEA/IRFU. The results of this thesis will provide a solid base for a better understanding of 1/f noise and white noise in cryogenic HEMTs with the objective to improve them for various considered applications.

Dans les années 2000, les composants de puissance en carbure de silicium (SiC) font leur apparition sur le marché industriel offrant d'excellentes performances. Elles se traduisent par de meilleurs rendements et des fréquences de découpage plus élevées, entrainant une réduction significative du volume et de la masse des convertisseurs de puissance. Le SiC présente de plus un potentiel important de fonctionnement en haute température (>200°C) et permet donc d'envisager de placer l'électronique dans des environnements très contraints jusqu'alors inaccessibles. Pourtant les parts de marche du SiC restent limitées dans l'industrie vis à vis du manque de retour d'expérience concernant la fiabilité de ces technologies relativement nouvelles. Cette question reste aujourd'hui sans réponse et c'est avec cet objectif qu'a été menée cette étude axée sur le vieillissement et l'analyse des mécanismes de dégradation sur des composants de puissance SiC pour des applications haute température. Les tests de vieillissement ont été réalisés sur des transistors MOSFET SiC car ces composants attirent les industriels grâce à leur simplicité de commande et leur sécurité "normalement bloqué" (Normally-OFF). Néanmoins, la fiabilité de l'oxyde de grille est le paramètre limitant de cette structure. C'est pourquoi l'étude de la dérive de la tension de seuil a été mesurée avec une explication du phénomène d'instabilité du VTH. Les résultats ont montré qu'avec l'amélioration des procédés de fabrication, l'oxyde du MOSFET est robuste même pour des températures élevées (jusqu'à 300°C) atteintes grâce à un packaging approprié. Les durées de vie moyennes ont été extraites grâce à un banc de vieillissement accéléré développé pour cette étude. Des analyses macroscopiques ont été réalisées afin d'observer l'évolution des paramètres électriques en fonction du temps. Des études microscopiques sont conduites dans l'objectif d'associer l'évolution des caractéristiques électriques par rapport aux dégradations physiques internes à la puce. Pour notre véhicule de test, la défaillance se traduit par un emballement du courant de grille en régime statique et par l'apparition de fissures dans le poly-Silicium de la grille. Pour finir, une étude de comparaison avec des nouveaux transistors MOSFET a été réalisée. Ainsi l'analogie entre ces composants s'est portée sur des performances statiques, dynamiques, dérivé de la tension de seuil et sur la durée de vie moyenne dans le test de vieillissement. Le fil rouge de ces travaux de recherche est une analyse des mécanismes de dégradation avec une méthodologie rigoureuse permettant la réalisation d'une étude de fiabilité. Ces travaux peuvent servir de base pour toutes analyses d'anticipation de défaillances avec une estimation de la durée de vie extrapolée aux températures de l'application visée / Since 2000, Silicon Carbide (SiC) power devices have been available on the market offering tremendous performances. This leads to really high efficiency power systems, and allows achieving significative improvements in terms of volume and weight, i.e. a better integration. Moreover, SiC devices could be used at high temperature (>200°C). However, the SiCmarket share is limited by the lack of reliability studies. This problem has yet to be solved and this is the objective of this study : aging and failure mechanisms on power devices for high temperature applications. Aging tests have been realized on SiC MOSFETs. Due to its simple drive requirement and the advantage of safe normally-Off operation, SiCMOSFET is becoming a very promising device. However, the gate oxide remains one of the major weakness of this device. Thus, in this study, the threshold voltage shift has been measured and its instability has been explained. Results demonstrate good lifetime and stable operation regarding the threshold voltage below a 300°C temperature reached using a suitable packaging. Understanding SiC MOSFET reliability issues under realistic switching conditions remains a challenge that requires investigations. A specific aging test has been developed to monitor the electrical parameters of the device. This allows to estimate the health state and predict the remaining lifetime.Moreover, the defects in the failed device have been observed by using FIB and SEM imagery. The gate leakage current appears to reflect the state of health of the component with a runaway just before the failure. This hypothesis has been validated with micrographs showing cracks in the gate. Eventually, a comparative study has been realized with the new generations of SiCMOSFET