The industrial sector accounts for almost 40 % of the Swedish energy use and in order to meet the EU’s 2020 targets, an efficient production of high quality and great finish goods are more and more in demand. Moreover, it is important to develop the activities with the lowest environmental impact possible.  The energy audit process is an effective tool to achieve it. Thus, in this document the energy audit of an industrial company, Automat Industrier in Gävle, Sweden, was carried out. The energy balance of the building and the potential energy efficiency measures were analyzed with the IDA ICE simulation. The proposed energy retrofitting was apropos of the building envelope, the lighting system, the ventilation system and the installation of a PV system on the roof of the building. The survey indicated that the potential energy savings of the company accounted for 62.5 % of the current electricity use and 48.8 % of the current DH use if all the proposed ameliorations were performed. The main promoter of the electricity savings is the installation of the PV system, with 85 % of influence. Almost 90 % of the DH savings are due to the measures in the ventilation system. Financially, these savings can reach the amounts of 531 597 SEK/year for electricity and 174 201 SEK/year for DH. Nevertheless, the ameliorations regarding the building envelope have very long payback periods. Thus, it was recommended to not pursue them. Fortunately, the energy efficiency measures providing the greatest savings’ payback periods are between 3.47 years and 10.22 years long. As they are independent from each other, the owner has the freedom to decide whether to apply them or not and when if so.

The industry sector accounts for a vast amount of the world’s total energy use, as much as 37% during 2018. Using energy in a sustainable way is necessary from both an environmental and an economical perspective, and it is therefore relevant to take measurements that result in a more efficient use of energy. One way for industries to become more energy efficient is to recover the waste heat, which is energy that otherwise would go to waste. This report aims to find a method to recover and reuse the low temperature waste heat available at the life science company Cytiva’s production site in Uppsala, Sweden. The proposed solution will be to use the waste heat for heating a vertical greenhouse. The study will examine whether this is feasible, and also how installing photovoltaics affects the energy use. Furthermore, the environmental impact of operating the greenhouse with waste heat is also investigated by calculating the CO2 equivalent. The low temperature waste heat that Cytiva provides relevant for this study is 6683 kW, which will be used to heat up the greenhouse. Simulations in the software IDA ICE will be used to construct and simulate a model of the vertical greenhouse. Results from the simulations show that the chosen size, 25 x 50 x 35.5 meters, gives a good approximation according to the wanted temperature range, 18.3-32.2°C. Furthermore, the results imply that the total energy use, 790 652 kWh, and average power, 90.26 kW is less than the available waste heat and there is a large amount that still is unused. The CO2 equivalent is calculated to be 29 317 kg. A sensitivity analysis is made to evaluate the window-to-wall ratio as well as the size of the entire greenhouse. It showed that both parameters are critical and makes a big difference in the simulations.