Spelling suggestions: "subject:"incompressible"" "subject:"uncompressible""
1 |
Analyse mathématique des mouvements des rigides dans un fluide parfait / Mathematical Analysis of the motion of rigid bodies in a perfect fluidHouot, Jean Gabriel 27 June 2008 (has links)
Dans cette thèse nous étudions le mouvement de solides rigides dans un fluide parfait incompressible. Dans la première partie nous étudions le cas des fluides potentiels. Le problème modèle est le mouvement d'un disque dans un demi-plan où nous étudions les chocs entre le disque et la paroi. Ce problème est relié à l'étude de problèmes de Neumann qui dépendent de la trajectoire du disque. Nous généralisons nos résultats aux cas de plusieurs solides. Nous montrons que les équations se réduisent à un système d'équations différentielles sur une variété de dimension finie. La dernière partie est consacrée à l'étude du problème général. Nous utilisons les résultats développés dans les parties précédentes pour transformer le système d'équations aux dérivées partielles du problème en un système d'équations différentielles ordinaires sur une variété de dimension infinie. Nous obtenons ainsi existence et unicité locale de la solution. / In this thesis we study the motion of rigid bodies in an incompressible perfect fluid. In the first part we study the potential fluids. The model problem is the motion of a disc in a half plan where we study the shocks between the disc and the wall. This problem is linked to the study of Neumann problems which depend on the trajectory of the disc. We generalize our results to the case of several bodies. We prove that the equations reduce to a system of ordinary differential equations on a finite dimensional manifold. The second part is devoted to the study of general case. We use the results developed in the previous part to transform the system of partial differential equations into a system of ordinary differential equations on a infinite dimensional manifold. So we obtain the local existence and uniqueness of the solution.
|
2 |
Fractal dimensions and their relationship to filtration characteristicsBrock, S. T. H. January 2000 (has links)
Work has been performed to characterise filtration systems according to their fractal properties and to construct agglomerates to mimic the filtration systems under scrutiny. The first objective was achieved by carrying out experiments examining the dead-end filtration of two separate mineral suspensions, namely calcite and talc. These minerals were chosen to represent typical incompressible (calcite) and compressible (talc) filtration systems, undergoing filtration using a range of pressures. The experimental apparatus produced filter cakes that could be sampled, sectioned and examined under high magnification. The second objective was met by developing a computer application that could construct simulated particle agglomerates in both two and three dimensions, using a seed agglomeration model as well as simulating filtration by means of a virtua1 filter cell. A large number of simulations were completed to mimic both the dead-end filtration and other agglomerate models. The computer application was also capable of characterising the fractal and Euclidean spatial nature of both the simulated and experimental particulate systems, using a variety of techniques. Euclidean spatial attributes such as porosity as well as fractal properties including surface roughness and a number of density fractal dimensions have been measured for both types of system and demonstrate that the conditions under which the trials were performed have a bearing on the final configuration of the structures. Results from both experimental and simulation work show that fractal dimensions offer a valid method of measuring the properties of filtration systems. Experimental results showed that as the filtering pressure was increased, the density fractal dimension for the system appeared to increase. This change in fractal dimension was also accompanied by a decrease in the porosity of the system (more so for talc than the calcite), confirming the compressibility of the materials under scrutiny. The characterisation of the sampled cakes also showed that the spatial characteristics vary within the individual slices of the sample,in agreement with modem filtration theory. Results from the simulations show that both the physical and fractal properties of the resulting structures varied with the parameters used to construct them. As a rule, as the particles in the simulations were able to move in a more diffusive manner (akin to Brownian motion), the agglomerates they formed had a more open, rugged structure. The simulation of filtration systems also showed a variation within the individual cake structures. In the case of the filtration simulations, the probability assigned to the particles' sticking to the growing agglomerate was the controlling factor. In addition, it was found that the simulated cakes had similar spatial properties to the experimental systems they were designed to replicate.
|
3 |
A numerical study of finite element calculations for incompressible materials under applied boundary displacementsNagarkal Venkatakrishnaiah, Vinay Kumar 23 August 2006
In this thesis, numerical experiments are performed to test the numerical stability of the finite element method for analyzing incompressible materials from boundary displacements. The significance of the study relies on the fact that incompressibility, or density preservation during deformation, is an important property of materials such as rubber and soft tissue.<p>It is well known that the finite element analysis (FEA) of incompressible materials is less straightforward than for materials which are compressible. The FEA of incompressible materials using the usual displacement based finite element method results in an unstable solution for the stress field. Hence, a different formulation called the mixed u-p formulation (u displacement, p pressure) is used for the analysis. The u-p formulation results in a stable solution but only when the forces and/or stress tractions acting on the structure are known. There are, however, certain situations in the real world where the forces or stress tractions acting on the structure are unknown, but the deformation (i.e. displacements) due to the forces can be measured. One example is the stress analysis of soft tissues. High resolution images of initial and deformed states of a tissue can be used to obtain the displacements along the boundary. In such cases, the only inputs to the finite element method are the structural geometry, material properties, and boundary displacements. When finite element analysis of incompressible materials with displacement boundary conditions is performed, even the mixed u-p formulation results in highly unstable calculations of the stress field. Here, a hypothesis for solving this problem is developed and tested. Theories of linear and nonlinear stress analysis are reviewed to demonstrate that it may be possible to determine the von Mises stress uniquely in spite of the numerical instability inherent in the calculations.<p>To validate this concept, four different numerical examples representing different deformation processes are considered using ANSYS®: a plate in simple shear; expansion of a thick-walled cylinder; a plate in uniform strain; and Cooks membrane. Numerical results show that, unlike the normal stress components Sx, Sy, and Sz, the calculated values of the von Mises stress are reasonably accurate if measurement errors in the displacement data are small. As the measurement error increases, the error in the von Mises stress increases approximately linearly for linear problems, but can become unacceptably large in nonlinear cases, to the point where solution process encounter fatal errors. A quasi-Dirichlet patch test in association with this problem is also introduced.
|
4 |
A numerical study of finite element calculations for incompressible materials under applied boundary displacementsNagarkal Venkatakrishnaiah, Vinay Kumar 23 August 2006 (has links)
In this thesis, numerical experiments are performed to test the numerical stability of the finite element method for analyzing incompressible materials from boundary displacements. The significance of the study relies on the fact that incompressibility, or density preservation during deformation, is an important property of materials such as rubber and soft tissue.<p>It is well known that the finite element analysis (FEA) of incompressible materials is less straightforward than for materials which are compressible. The FEA of incompressible materials using the usual displacement based finite element method results in an unstable solution for the stress field. Hence, a different formulation called the mixed u-p formulation (u displacement, p pressure) is used for the analysis. The u-p formulation results in a stable solution but only when the forces and/or stress tractions acting on the structure are known. There are, however, certain situations in the real world where the forces or stress tractions acting on the structure are unknown, but the deformation (i.e. displacements) due to the forces can be measured. One example is the stress analysis of soft tissues. High resolution images of initial and deformed states of a tissue can be used to obtain the displacements along the boundary. In such cases, the only inputs to the finite element method are the structural geometry, material properties, and boundary displacements. When finite element analysis of incompressible materials with displacement boundary conditions is performed, even the mixed u-p formulation results in highly unstable calculations of the stress field. Here, a hypothesis for solving this problem is developed and tested. Theories of linear and nonlinear stress analysis are reviewed to demonstrate that it may be possible to determine the von Mises stress uniquely in spite of the numerical instability inherent in the calculations.<p>To validate this concept, four different numerical examples representing different deformation processes are considered using ANSYS®: a plate in simple shear; expansion of a thick-walled cylinder; a plate in uniform strain; and Cooks membrane. Numerical results show that, unlike the normal stress components Sx, Sy, and Sz, the calculated values of the von Mises stress are reasonably accurate if measurement errors in the displacement data are small. As the measurement error increases, the error in the von Mises stress increases approximately linearly for linear problems, but can become unacceptably large in nonlinear cases, to the point where solution process encounter fatal errors. A quasi-Dirichlet patch test in association with this problem is also introduced.
|
5 |
Optimal Linear Feedback Control for Incompressible Fluid FlowStoyanov, Miroslav Karolinov 24 July 2006 (has links)
Linear feedback control is considered for large systems of differential algebraic equations arising from discretization of saddle point problems. Necessary conditions are derived by applying the Maximum Principle and have the form of constrained Riccati equations. We consider two approaches for solving the feedback control problem as well as practical numerical methods. Numerical studies using examples derived from a constrained heat equation and Stokes equation confirms the effectiveness of the approaches we consider. / Master of Science
|
6 |
Unstructured mesh based models for incompressible turbulent flowsManickam, Pradeep January 2013 (has links)
A development of high resolution NFT model for simulation of incompressible flows is presented. The model uses finite volume spatial discretisation with edge based data structure and operates on unstructured meshes with arbitrary shaped cells. The key features of the model include non-oscillatory advection scheme Multidimensional Positive Definite Advection Transport Algorithm (MPDATA) and non-symmetric Krylov-subspace elliptic solver. The NFT MPDATA model integrates the Reynolds Average Navier Stokes (RANS) equations. The implementation of the Spalart-Allmaras one equations turbulence model extends the development further to turbulent flows. An efficient non-staggered mesh arrangement for pressure and velocity is employed and provides smooth solutions without a need of artificial dissipation. In contrast to commonly used schemes, a collocated arrangement for flow variables is possible as the stabilisation of the NFT MPDATA scheme arises naturally from the design of MPDATA. Other benefits of MPDATA include: second order accuracy, strict sign-preserving and full multidimensionality. The flexibility and robustness of the new approach is studied and validated for laminar and turbulent flows. Theoretical developments are supported by numerical testing. Successful quantitative and qualitative comparisons with the numerical and experimental results available from literature confirm the validity and accuracy of the NFT MPDATA scheme and open the avenue for its exploitation for engineering problems with complex geometries requiring flexible representation using unstructured meshes.
|
7 |
Simulation of turbulent aircraft wake vortex flows and their impact on the signals returned by a coherent Doppler LIDAR systemBricteux, Laurent 07 March 2008 (has links)
This thesis concerns the numerical simulation and the remote sensing of aircraft wake vortex flows.
Due to its lift force, an aircraft releases large scale swirling flows (vortices) in its wake.
As these vortices can impact significantly the trajectory of a following aircraft, their study
is of great importance for practical applications concerning safety of air traffic management.
The investigation carried here is twofold: it concerns, on one hand, the physics and the numerical
simulation of aircraft wake vortices and, on the other hand, the technique to detect those vortices
and measure their properties.The numerical simulation of aircraft wake vortices requires high order
and energy conserving codes. Moreover, as aircraft wake vortex flows are turbulent,
subgrid scale (SGS) models are required to perform Large Eddy Simulation (LES) of these flows.
In the first part of this work, the numerical codes used (here spectral and high order finite differences)
are presented and validated. Several SGS models are presented and their ability to perform LES of vortical
flows, also in presence of a ground is assessed. In particular a new “multiscale” model with a natural wall
damping behaviour has been developed and investigated: its performance is very good.
In the second part, two flows relevant to the wake vortex problem are analyzed.
The LES of a wake vortex system in a weakly turbulent atmosphere allowed highlighting the turbulent
equilibrium state of such a flow. LES of wake vortices in ground effect, with and without wind,
were also carried out. These simulations help to better understand the physics of wake vortices.
In the last part, we simulate the remote sensing of aircraft wake vortices using a ground based
LIDAR (Light Detection And Ranging) system.
The aim of this LIDAR is to sense aircraft wake vortices and turbulent winds.
As the LIDAR signals are simulated using realistic parameters and realistic turbulent flows,
this work serves as support in the design of an airport based LIDAR system.
|
8 |
An Immersed Interface Method for the Incompressible Navier-Stokes EquationsLe, Duc-Vinh, Khoo, Boo Cheong, Peraire, Jaime 01 1900 (has links)
We present an immersed interface algorithm for the incompressible Navier Stokes equations. The interface is represented by cubic splines which are interpolated through a set of Lagrangian control points. The position of the control points is implicitly updated using the fluid velocity. The forces that the interface exerts on the fluid are computed from the constitutive relation of the interface and are applied to the fluid through jumps in the pressure and jumps in the derivatives of pressure and velocity. A projection method is used to time advance the Navier-Stokes equations on a uniform cartesian mesh. The Poisson-like equations required for the implicit solution of the diffusive and pressure terms are solved using a fast Fourier transform algorithm. The position of the interface is updated implicitly using a quasi-Newton method (BFGS) within each timestep. Several examples are presented to illustrate the flexibility of the presented approach. / Singapore-MIT Alliance (SMA)
|
9 |
Approximation Techniques for Incompressible Flows with Heterogeneous PropertiesSalgado Gonzalez, Abner Jonatan 2010 August 1900 (has links)
We study approximation techniques for incompressible
flows with heterogeneous
properties. Speci cally, we study two types of phenomena. The first is the flow of a
viscous incompressible fluid through a rigid porous medium, where the permeability
of the medium depends on the pressure. The second is the
ow of a viscous incompressible fluid with variable density. The heterogeneity is the permeability and the
density, respectively.
For the first problem, we propose a finite element discretization and, in the case
where the dependence on the pressure is bounded from above and below, we prove its
convergence to the solution and propose an algorithm to solve the discrete system. In
the case where the dependence is exponential, we propose a splitting scheme which
involves solving only two linear systems.
For the second problem, we introduce a fractional time-stepping scheme which,
as opposed to other existing techniques, requires only the solution of a Poisson equation
for the determination of the pressure. This simpli cation greatly reduces the
computational cost. We prove the stability of first and second order schemes, and
provide error estimates for first order schemes.
For all the introduced discretization schemes we present numerical experiments,
which illustrate their performance on model problems, as well as on realistic ones.
|
10 |
Level Set Projection Method for Incompressible Navier-Stokes on Arbitrary BoundariesWilliams-Rioux, Bertrand 12 January 2012 (has links)
Second order level set projection method for incompressible Navier-Stokes equations
is proposed to solve flow around arbitrary geometries. We used rectilinear grid
with collocated cell centered velocity and pressure. An explicit Godunov procedure
is used to address the nonlinear advection terms, and an implicit Crank-Nicholson
method to update viscous effects. An approximate pressure projection is implemented
at the end of the time stepping using multigrid as a conventional fast iterative method.
The level set method developed by Osher and Sethian [17] is implemented to address
real momentum and pressure boundary conditions by the advection of a distance
function, as proposed by Aslam [3]. Numerical results for the Strouhal number and
drag coefficients validated the model with good accuracy for flow over a cylinder in
the parallel shedding regime (47 < Re < 180). Simulations for an array of cylinders
and an oscillating cylinder were performed, with the latter demonstrating our
methods ability to handle dynamic boundary conditions.
|
Page generated in 0.0382 seconds