Spelling suggestions: "subject:"indirect a'method"" "subject:"indirect 20method""
1 |
On the use of Quasi-Maximum Likelihood Estimation and Indirect Method for Stochastic Volatility modelsIshakova, Gulmira January 2008 (has links)
<p>Stochastic volatility models have been focus for research in recent years.</p><p>One interesting and important topic has been the estimation procedure.</p><p>For a given stochastic volatility model this project aims to compare two</p><p>methods of parameter estimation.</p>
|
2 |
On the use of Quasi-Maximum Likelihood Estimation and Indirect Method for Stochastic Volatility modelsIshakova, Gulmira January 2008 (has links)
Stochastic volatility models have been focus for research in recent years. One interesting and important topic has been the estimation procedure. For a given stochastic volatility model this project aims to compare two methods of parameter estimation.
|
3 |
Comparison of the accuracy of direct versus indirect bracket placement in orthodontics: An in vitro studyStreit, Günther Arthur January 2020 (has links)
Magister Scientiae Dentium - MSc(Dent) / The purpose of this study was to compare the accuracy of direct versus indirect bracket placement in
orthodontics in a controlled setting. The more accurate the initial bracket placement is the less time
will be required in terms of treatment. Accurate bracket placement can reduce the envelope of error in
the three dimensions of vertical (incisal height, height of tooth), horizontal (mesial-distal) and angular
(degrees incisal to root apex causing rotational irregularities) based on Andrews’ six keys to normal
occlusion (Andrews, 1979).
In this comparative experimental study, 10 Class I molar relation study models were selected from the
researcher’s practice archives. Only the MBT pre-adjusted or angulated orthodontic brackets were
used on manikins, followed by the use of 3D CAD CAM technology to evaluate the results against a
pre-determined golden standard.
|
4 |
ExigÃncias nutricionais de cordeiros da raÃa Somalis brasileira / Nutritional requirements of brazilian Somali lambsRildson Melo Fontenele 07 November 2014 (has links)
CoordenaÃÃo de AperfeÃoamento de Pessoal de NÃvel Superior / Objetivou-se com o seguinte trabalho determinar as exigÃncias nutricionais de energia e proteÃna em ovinos Somalis Brasileira. Utilizou-se 48 ovinos Somalis Brasileira em crescimento, nÃo-castrados, com idade e peso corporal (PC) mÃdio de 60 dias e 13,47  1,76 kg, respectivamente. ApÃs um perÃodo de adaptaÃÃo de 20 dias, oito animais foram abatidos e utilizados como referÃncia para estimativas do peso de corpo vazio (PCVZ) e da composiÃÃo corporal inicial dos demais animais. Os animais remanescentes foram distribuÃdos em um delineamento em blocos casualizados, sendo os tratamentos, raÃÃes contendo diferentes nÃveis de energia metabolizÃvel (1,18; 2,07; 2,25; 2,42 e 2,69 Mcal/kg MS), com oito repetiÃÃes. O peso de abate foi determinado quando a mÃdia de peso dos animais de um dos cinco tratamentos atingiu 28 kg. A exigÃncia lÃquida de energia para mantenÃa foi estimado extrapolando-se a equaÃÃo de regressÃo do logaritmo da produÃÃo de calor, em funÃÃo do consumo de energia metabolizÃvel (CEM) para o nÃvel zero de CEM. A excreÃÃo diÃria de nitrogÃnio (N) foi estimada extrapolando-se a equaÃÃo de regressÃo de consumo de N (g/kg PC0,75/dia) em funÃÃo da retenÃÃo de N (g/kg PC0,75/dia) para o consumo zero. Foram ajustadas equaÃÃes de regressÃo do logaritmo do conteÃdo de gordura, energia e proteÃna em funÃÃo do logaritmo do PCVZ dos animais. A concentraÃÃo de energia lÃquida da dieta para mantenÃa, foi obtida dividindo-se a produÃÃo de calor em jejum, pelo CMS para manter o equilÃbrio de energia, expresso em g de MS/kg PCVZ0,75. A validaÃÃo do modelo SRNS foi realizada atravÃs do ajuste de modelo de regressÃo linear simples entre os valores preditos (variÃvel independente) e observados (variÃvel dependente), as variÃveis analisadas foram CMS e GPC. A composiÃÃo quÃmica corporal foi determinada utilizando a composiÃÃo da meia carcaÃa direita, assim como uma amostra da seÃÃo HH, obtida da meia carcaÃa esquerda. Na meia-carcaÃa esquerda resfriada, retirou-se o corte da seÃÃo HH, pela secÃÃo transversal da 9a-10a-11a costelas no ponto correspondente a 61,5% da distÃncia entre a vÃrtebra seccionada e o inÃcio da cartilagem da 12a costela, em seguida, a seÃÃo HH foi moÃda em moedor de carne industrial e homogeneizada. O ganho mÃdio diÃrio e o ganho de peso de corpo vazio aumentaram linearmente com o aumento dos nÃveis de energia metabolizÃveis. Jà o peso corporal final, peso corporal ao abate, peso de corpo vazio, consumo de matÃria seca e consumo de energia metabolizÃvel apresentaram efeito quadrÃtico (P <0,001) com o aumento do nÃvel de energia. O teor de energia e de gordura de PCVZ dos animais aumentou de 2,77 Mcal/kg e 209,17 g/kg para 3,47 Mcal/kg e 294,08 g/kg de PCVZ, respectivamente, e o PC aumentou de 13,00 para 28,70 kg. O consumo de nitrogÃnio apresentou efeito quadrÃtico, com ponto de mÃxima de 2,59 Mcal/kg MS de energia metabolizÃvel, correspondendo ao consumo mÃximo de N de 2,90 g/kg PC0,75/dia. Jà para o nitrogÃnio retido diariamente, observou-se resposta linear crescente com o aumento nos nÃveis de energia metabolizÃvel nas dietas. Observou-se uma diminuiÃÃo da quantidade de proteÃna no corpo vazio dos animais com o aumento do PCVZ, passando de 143,71 para 122,52 g/kg PCVZ, quando os animais aumentaram o peso corporal de 13,00 para 28,70 kg. A excreÃÃo diÃria de N foi estimada em 0,128 g/kg PC0,75/dia. A composiÃÃo corporal de ovinos Somalis Brasileira varia de 538,28 a 593,93 g/kg de PCVZ para Ãgua, 228,17 a 353,13 g/kg de PCVZ para gordura, 114,53 a 157,93 g/kg de PCVZ para poteÃna e 17,94 a 31,68 g/kg de PCVZ de matÃria mineral, para dietas contendo 1,18 a 2,69 Mcal/kg de MS, respectivamente. A exigÃncia lÃquida de energia para mantenÃa à 45,63 g/kg PCVZ0,75/dia. O aumento no peso dos animais de 13,00 para 28,70 kg PC eleva as deposiÃÃes de gordura de 283,75 para 398,93 g/kg GPCVZ e energia de 3,42 para 4,30 Mcal/kg GPCVZ. A exigÃncia lÃquida de proteÃna para mantenÃa à 0,80 g/kg PC0,75/dia, havendo uma diminuiÃÃo da exigÃncia lÃquida de proteÃna para GPCVZ de 119,72 para 102,07 g/kg GPCVZ, conforme o peso corporal aumenta de 13,00 para 28,70 kg. A eficiÃncia de uso da energia metabolizÃvel para mantenÃa à de 0,67. Jà a eficiÃncia de uso da energia metabolizÃvel para ganho varia de 1,85 a 0,43 para dietas contendo 1,18 a 2,69 Mcal/hg MS respectivamente. As exigÃncias lÃquidas de energia e proteÃna elevam-se com o aumento do peso corporal e aumento do ganho de peso corporal dos ovinos Somalis Brasileira. O modelo Small Ruminant Nutrition Systems à sensÃvel para predizer o consumo de matÃria seca, entretanto, subestimou em 5,18% o ganho mÃdio diÃrio de peso corporal. A seÃÃo HH estimou satisfatoriamente a composiÃÃo quÃmica de Ãgua, proteÃna e gordura na carcaÃa e no corpo vazio, enquanto o teor de minerais foi subestimado em torno de 27,07% na carcaÃa e 14,91% no corpo vazio. Os teores de Ãgua, proteÃna bruta e gordura da carcaÃa podem ser preditos pela seÃÃo HH. Por fim, a composiÃÃo quÃmica da seÃÃo HH pode ser utilizada em substituiÃÃo à composiÃÃo quÃmica da carcaÃa para predizer composiÃÃo quÃmica do corpo vazio em ovinos Somalis Brasileira. / Objetivou-se com o seguinte trabalho determinar as exigÃncias nutricionais de energia e proteÃna em ovinos Somalis Brasileira. Utilizou-se 48 ovinos Somalis Brasileira em crescimento, nÃo-castrados, com idade e peso corporal (PC) mÃdio de 60 dias e 13,47  1,76 kg, respectivamente. ApÃs um perÃodo de adaptaÃÃo de 20 dias, oito animais foram abatidos e utilizados como referÃncia para estimativas do peso de corpo vazio (PCVZ) e da composiÃÃo corporal inicial dos demais animais. Os animais remanescentes foram distribuÃdos em um delineamento em blocos casualizados, sendo os tratamentos, raÃÃes contendo diferentes nÃveis de energia metabolizÃvel (1,18; 2,07; 2,25; 2,42 e 2,69 Mcal/kg MS), com oito repetiÃÃes. O peso de abate foi determinado quando a mÃdia de peso dos animais de um dos cinco tratamentos atingiu 28 kg. A exigÃncia lÃquida de energia para mantenÃa foi estimado extrapolando-se a equaÃÃo de regressÃo do logaritmo da produÃÃo de calor, em funÃÃo do consumo de energia metabolizÃvel (CEM) para o nÃvel zero de CEM. A excreÃÃo diÃria de nitrogÃnio (N) foi estimada extrapolando-se a equaÃÃo de regressÃo de consumo de N (g/kg PC0,75/dia) em funÃÃo da retenÃÃo de N (g/kg PC0,75/dia) para o consumo zero. Foram ajustadas equaÃÃes de regressÃo do logaritmo do conteÃdo de gordura, energia e proteÃna em funÃÃo do logaritmo do PCVZ dos animais. A concentraÃÃo de energia lÃquida da dieta para mantenÃa, foi obtida dividindo-se a produÃÃo de calor em jejum, pelo CMS para manter o equilÃbrio de energia, expresso em g de MS/kg PCVZ0,75. A validaÃÃo do modelo SRNS foi realizada atravÃs do ajuste de modelo de regressÃo linear simples entre os valores preditos (variÃvel independente) e observados (variÃvel dependente), as variÃveis analisadas foram CMS e GPC. A composiÃÃo quÃmica corporal foi determinada utilizando a composiÃÃo da meia carcaÃa direita, assim como uma amostra da seÃÃo HH, obtida da meia carcaÃa esquerda. Na meia-carcaÃa esquerda resfriada, retirou-se o corte da seÃÃo HH, pela secÃÃo transversal da 9a-10a-11a costelas no ponto correspondente a 61,5% da distÃncia entre a vÃrtebra seccionada e o inÃcio da cartilagem da 12a costela, em seguida, a seÃÃo HH foi moÃda em moedor de carne industrial e homogeneizada. O ganho mÃdio diÃrio e o ganho de peso de corpo vazio aumentaram linearmente com o aumento dos nÃveis de energia metabolizÃveis. Jà o peso corporal final, peso corporal ao abate, peso de corpo vazio, consumo de matÃria seca e consumo de energia metabolizÃvel apresentaram efeito quadrÃtico (P <0,001) com o aumento do nÃvel de energia. O teor de energia e de gordura de PCVZ dos animais aumentou de 2,77 Mcal/kg e 209,17 g/kg para 3,47 Mcal/kg e 294,08 g/kg de PCVZ, respectivamente, e o PC aumentou de 13,00 para 28,70 kg. O consumo de nitrogÃnio apresentou efeito quadrÃtico, com ponto de mÃxima de 2,59 Mcal/kg MS de energia metabolizÃvel, correspondendo ao consumo mÃximo de N de 2,90 g/kg PC0,75/dia. Jà para o nitrogÃnio retido diariamente, observou-se resposta linear crescente com o aumento nos nÃveis de energia metabolizÃvel nas dietas. Observou-se uma diminuiÃÃo da quantidade de proteÃna no corpo vazio dos animais com o aumento do PCVZ, passando de 143,71 para 122,52 g/kg PCVZ, quando os animais aumentaram o peso corporal de 13,00 para 28,70 kg. A excreÃÃo diÃria de N foi estimada em 0,128 g/kg PC0,75/dia. A composiÃÃo corporal de ovinos Somalis Brasileira varia de 538,28 a 593,93 g/kg de PCVZ para Ãgua, 228,17 a 353,13 g/kg de PCVZ para gordura, 114,53 a 157,93 g/kg de PCVZ para poteÃna e 17,94 a 31,68 g/kg de PCVZ de matÃria mineral, para dietas contendo 1,18 a 2,69 Mcal/kg de MS, respectivamente. A exigÃncia lÃquida de energia para mantenÃa à 45,63 g/kg PCVZ0,75/dia. O aumento no peso dos animais de 13,00 para 28,70 kg PC eleva as deposiÃÃes de gordura de 283,75 para 398,93 g/kg GPCVZ e energia de 3,42 para 4,30 Mcal/kg GPCVZ. A exigÃncia lÃquida de proteÃna para mantenÃa à 0,80 g/kg PC0,75/dia, havendo uma diminuiÃÃo da exigÃncia lÃquida de proteÃna para GPCVZ de 119,72 para 102,07 g/kg GPCVZ, conforme o peso corporal aumenta de 13,00 para 28,70 kg. A eficiÃncia de uso da energia metabolizÃvel para mantenÃa à de 0,67. Jà a eficiÃncia de uso da energia metabolizÃvel para ganho varia de 1,85 a 0,43 para dietas contendo 1,18 a 2,69 Mcal/hg MS respectivamente. As exigÃncias lÃquidas de energia e proteÃna elevam-se com o aumento do peso corporal e aumento do ganho de peso corporal dos ovinos Somalis Brasileira. O modelo Small Ruminant Nutrition Systems à sensÃvel para predizer o consumo de matÃria seca, entretanto, subestimou em 5,18% o ganho mÃdio diÃrio de peso corporal. A seÃÃo HH estimou satisfatoriamente a composiÃÃo quÃmica de Ãgua, proteÃna e gordura na carcaÃa e no corpo vazio, enquanto o teor de minerais foi subestimado em torno de 27,07% na carcaÃa e 14,91% no corpo vazio. Os teores de Ãgua, proteÃna bruta e gordura da carcaÃa podem ser preditos pela seÃÃo HH. Por fim, a composiÃÃo quÃmica da seÃÃo HH pode ser utilizada em substituiÃÃo à composiÃÃo quÃmica da carcaÃa para predizer composiÃÃo quÃmica do corpo vazio em ovinos Somalis Brasileira. / The objective of the following work to determine the nutritional requirements of energy and protein in Brazilian Somali sheep. We used 48 sheep Brazilian Somali growing, non-castrated, age and body weight (BW) average of 60 days and 13.47  1.76 kg respectively. After a 20 day adaptation period, eight animals were slaughtered and used as a reference for estimates of empty body weight (EBW) and initial body composition of other animals. The remaining animals were distributed in a randomized block design, with the treatments, diets with different levels of metabolizable energy (1.18; 2.07; 2.25; 2.42 and 2.69 Mcal/kg DM), with eight repetitions. The weight of slaughter animals was determined when the weight average of the five treatments was 28 kg. The net energy requirement for maintenance was estimated extrapolating the logarithmic regression equation of heat production, depending on the metabolizable energy intake (MEI) to the zero level of MEI. The daily excretion of nitrogen (N) was estimated by extrapolating to N consumption regression equation (g/BW0.75 kg/day) as a function of the N retention (g/BW 0.75 kg/day) for consumption zero. They were adjusted regression of log equations fat content, protein and energy in the logarithm of EBW animals. The concentration of net energy for maintenance diet was obtained by dividing the heat production in fasting, the DMI to maintain energy balance in g DM/kg EBW0.75. The validation of the SRNS model was performed using the simple linear regression model fit between the predicted values (independent variable) and observed (dependent variable), variables were analyzed DMI and BWG. The body composition was determined using the composition of the right half carcass, as well as a sample of the section HH, obtained from the left crankcase half. In middle housing cooled left, retreated cutting the section HH, the cross section of the 9th-10th-11th rib at the point corresponding to 61.5% of the distance between the sectioned vertebrae and the beginning of the 12th rib cartilage in then, the HH section was ground in grinder industrial and homogenised meat. The average daily gain and empty body weight gain increased linearly with increasing metabolizable energy levels. But the final body weight, body weight at slaughter, empty body weight, dry matter intake and metabolizable energy intake showed a quadratic effect (P<0.001) with increasing energy level. Energy and fat EBW of the animals increased from 2.77 Mcal/kg to 209.17 g/kg to 3.47 Mcal/kg to 294.08 g/kg EBW, respectively, and increased the BW 13.00 to 28.70 kg. Consumption of nitrogen showed quadratic effect with point of maximum of 2.59 Mcal/kg DM of metabolizable energy, corresponding to the maximum consumption of N of 2.90 g/kg BW0.75/day. As for the nitrogen retained daily, there was a positive linear correlation with the increase in metabolizable energy levels in the diets. There was a decreased amount of protein in the empty body of animals with increased EBW, from 143.71 to 122.52 g/kg EBW, when the animals increased the body weight of 13.00 to 28.70 kg. The daily excretion of N was estimated at 0.128 g/BW0.75 kg/day. The body composition of Brazilian Somali sheep ranges from 538.28 to 593.93 g/kg EBW for water, from 228.17 to 353.13 g/kg EBW for fat, 114.53 to 157.93 g/kg EBW for protein and from 17.94 to 31.68 g/kg of EBW of mineral matter, for diets containing 1.18 to 2.69 Mcal/kg DM, respectively. The net energy requirement for maintenance is 45.63 g/kg EBW0.75/day. The increase in animal weight of 13.00 to 28.70 kg BW increases the deposition of fat from 283.75 to 398.93 g/kg EBW and energy of 3.42 to 4.30 Mcal/kg EBW. The protein requirement for maintenance is 0.80 g/BW0.75 kg/day, with a decreased protein requirement for EBW of 119.72 to 102.07 g/kg EBW, as the weight increases by 13.00 to 28.70 kg. The use efficiency of metabolizable energy for maintenance is 0.67. Already use efficiency of metabolizable energy for gain varies from 1.85 to 0.43 for diets containing 1.18 to 2.69 Mcal/kg DM, respectively. The net requirements of energy and protein increase with increasing body weight and increase in body weight gain of Brazilian Somali sheep. The model Small Ruminant Nutrition Systems is sensitive to predict dry matter intake, however, underestimated in 5.18% the average daily weight gain. The section HH satisfactorily estimated the chemical composition of water, protein and fat in the carcass and empty body, while the mineral content was underestimated around 27.07% 14.91% housing and empty body. The water content, crude protein and carcass fat can be predicted by section HH. Finally, the chemical composition of section HH can be used to replace the chemical composition of the carcass to predict chemical composition of empty body in Brazilian Somalis sheep. / The objective of the following work to determine the nutritional requirements of energy and protein in Brazilian Somali sheep. We used 48 sheep Brazilian Somali growing, non-castrated, age and body weight (BW) average of 60 days and 13.47  1.76 kg respectively. After a 20 day adaptation period, eight animals were slaughtered and used as a reference for estimates of empty body weight (EBW) and initial body composition of other animals. The remaining animals were distributed in a randomized block design, with the treatments, diets with different levels of metabolizable energy (1.18; 2.07; 2.25; 2.42 and 2.69 Mcal/kg DM), with eight repetitions. The weight of slaughter animals was determined when the weight average of the five treatments was 28 kg. The net energy requirement for maintenance was estimated extrapolating the logarithmic regression equation of heat production, depending on the metabolizable energy intake (MEI) to the zero level of MEI. The daily excretion of nitrogen (N) was estimated by extrapolating to N consumption regression equation (g/BW0.75 kg/day) as a function of the N retention (g/BW 0.75 kg/day) for consumption zero. They were adjusted regression of log equations fat content, protein and energy in the logarithm of EBW animals. The concentration of net energy for maintenance diet was obtained by dividing the heat production in fasting, the DMI to maintain energy balance in g DM/kg EBW0.75. The validation of the SRNS model was performed using the simple linear regression model fit between the predicted values (independent variable) and observed (dependent variable), variables were analyzed DMI and BWG. The body composition was determined using the composition of the right half carcass, as well as a sample of the section HH, obtained from the left crankcase half. In middle housing cooled left, retreated cutting the section HH, the cross section of the 9th-10th-11th rib at the point corresponding to 61.5% of the distance between the sectioned vertebrae and the beginning of the 12th rib cartilage in then, the HH section was ground in grinder industrial and homogenised meat. The average daily gain and empty body weight gain increased linearly with increasing metabolizable energy levels. But the final body weight, body weight at slaughter, empty body weight, dry matter intake and metabolizable energy intake showed a quadratic effect (P<0.001) with increasing energy level. Energy and fat EBW of the animals increased from 2.77 Mcal/kg to 209.17 g/kg to 3.47 Mcal/kg to 294.08 g/kg EBW, respectively, and increased the BW 13.00 to 28.70 kg. Consumption of nitrogen showed quadratic effect with point of maximum of 2.59 Mcal/kg DM of metabolizable energy, corresponding to the maximum consumption of N of 2.90 g/kg BW0.75/day. As for the nitrogen retained daily, there was a positive linear correlation with the increase in metabolizable energy levels in the diets. There was a decreased amount of protein in the empty body of animals with increased EBW, from 143.71 to 122.52 g/kg EBW, when the animals increased the body weight of 13.00 to 28.70 kg. The daily excretion of N was estimated at 0.128 g/BW0.75 kg/day. The body composition of Brazilian Somali sheep ranges from 538.28 to 593.93 g/kg EBW for water, from 228.17 to 353.13 g/kg EBW for fat, 114.53 to 157.93 g/kg EBW for protein and from 17.94 to 31.68 g/kg of EBW of mineral matter, for diets containing 1.18 to 2.69 Mcal/kg DM, respectively. The net energy requirement for maintenance is 45.63 g/kg EBW0.75/day. The increase in animal weight of 13.00 to 28.70 kg BW increases the deposition of fat from 283.75 to 398.93 g/kg EBW and energy of 3.42 to 4.30 Mcal/kg EBW. The protein requirement for maintenance is 0.80 g/BW0.75 kg/day, with a decreased protein requirement for EBW of 119.72 to 102.07 g/kg EBW, as the weight increases by 13.00 to 28.70 kg. The use efficiency of metabolizable energy for maintenance is 0.67. Already use efficiency of metabolizable energy for gain varies from 1.85 to 0.43 for diets containing 1.18 to 2.69 Mcal/kg DM, respectively. The net requirements of energy and protein increase with increasing body weight and increase in body weight gain of Brazilian Somali sheep. The model Small Ruminant Nutrition Systems is sensitive to predict dry matter intake, however, underestimated in 5.18% the average daily weight gain. The section HH satisfactorily estimated the chemical composition of water, protein and fat in the carcass and empty body, while the mineral content was underestimated around 27.07% 14.91% housing and empty body. The water content, crude protein and carcass fat can be predicted by section HH. Finally, the chemical composition of section HH can be used to replace the chemical composition of the carcass to predict chemical composition of empty body in Brazilian Somalis sheep.
|
5 |
The Duke of Uncertainty -Aspects of Professional SkillAlsterdal, Lotte January 2001 (has links)
<p><i>The Duke of Uncertainty - Aspects of Professional Skill</i>is a dissertation whose title is a literary metaphor designedto draw attention to encounters with unforeseen problems anddilemmas at work.</p><p>The first part of the dissertation presents the skill andtechnology tradition that has developed over the last twentyyears through explorative case studies. These have covered theskills of various occupational groups, such as processoperators in the paper-and-pulp and chemicals industries,managers and systems engineers working on real timeapplications in specialized knowledge intensive firms as wellas doctors and nurses.</p><p>The theoretical perspective is the epistemology of skillfocusing on the phenomenon of tacit knowledge. This has itsroots in Wittgenstein's philosophy of language as developed bythe philosophers Allan Janik and Kjell S. Johannessen.</p><p>The methodological framework develops indirect analogicalthinking which is a prerequisite for knowledge based onexperience, through exemplification.</p><p>The empirical part of the work shows knowledge offamiliarity among members of an occupational group with lowformal training but extensive practical experience, namelyassistant nurses. A comparative analysis is undertaken inrelation to previous case studies in the field of skill andtechnology aimed at occupational groups with high formaleducational qualifications.</p><p>A particular aspect to which attention is drawn is therhythm in work that unites occupational groups regardless ofeducational background. Occupational skill is treated as acapacity developed to find rhythm in action when confrontedwith situations that are hard to handle. The dissertationconsiders aspects that can be tried out in other occupationalarenas and paves the way for identifying phenomena in workinglife that hinder the development of rhythm in work.</p><p>The dissertation contributes to the setting-up ofundergraduate-level training for groups of people who have notpreviously had access to higher education, and aims tointroduce new aspects into the development of analoguethinking.</p><p><b>Key words</b>: practical versus theoretical knowledge, skillof epistemology, tacit knowledge, comparative case study,literary metaphor, analogical thinking, indirect method,occupational training.</p>
|
6 |
Avaliação e calibração de um osteodensitômetro para estimação da composição química corporal e composição de tecidos dissecados de suínos / Evaluation and calibration of an osteodensitometer to estimate body chemical composition and dissected composition in porkSilva, Marcos Kipper da 20 February 2015 (has links)
Coordenação de Aperfeiçoamento de Pessoal de Nível Superior / A series of studies have been developed to evaluate and calibrate a bone densitometry device (Dual-energy X-ray Absorptiometry DXA) as an indirect method for body, carcass, and pork evaluation. Thus, the technology was tested for its precision in repeatability and reproducibility conditions. The effect of the sample edge, temperature, and thickness of the sample, and the effect of modifying the composition of the sample by the addition of tissue were also tested. In addition, software packages were evaluated. Finally, a protocol was developed to calibrate the method estimating the chemical composition of entire body and half carcass; and the dissected tissue composition of half carcass and primary cuts. The repeatability and reproducibility of the equipment were in general satisfactory; however, some regions of interest should be avoided, such as the trunk. The reduction of the edge perimeter did not change the results provided by the device. The temperature had a slight effect on the results; however, a wide variation in temperature is necessary to generate a small change in DXA results. The thickness variation of a sample with constant composition was one of the factors that most influenced the DXA measurements. For this reason, the techniques for standardization considering this factor are crucial to enable this device utilization. The evaluated software were Total body and Small Animal, each one with its three configurations totaling six studies. Both software could be used to estimate the composition of dissected tissues; however, the more extensive was the dissection the lower was the accuracy of the method. Thus, estimating an amount of a particular tissue in a half carcass was more accurate than estimating the same tissues in the primal cuts. The calibration procedure allowed obtaining translation models with good accuracy and precision to estimate the chemical composition and dissected tissues. In addition, measurements took in a condition could be used to estimate the composition in another one. However, when the measurement was more specific then greater was the precision of estimation. Accurate results were achieved after small methodological adjustments. This happened because the factors affecting DXA measurements were quantified and easily corrected with method standardization. The DXA is an important tool for animal evaluation. Thus, DXA should be considered in future studies. / Uma série de estudos foram desenvolvidos para avaliar e calibrar um equipamento de densitometria óssea (Dual-energy X-ray Absorptiomentry DXA) como método indireto para avaliação corporal, de carcaça e de cortes cárneos suínos. Assim, a tecnologia foi testada quanta à sua precisão em condições de repetibilidade e reprodutibilidade; além dos efeitos de borda da amostra, temperatura e espessura da amostra; e do efeito da modificação da composição da amostra pela adição de tecidos. Os pacotes de softwares também foram avaliados quanto às suas configurações. Por fim, um protocolo foi desenvolvido para calibrar o método para estimação da composição química corporal e de meia carcaça suína, além da composição de tecidos dissecados de meia carcaça e cortes primários. A repetibilidade e reprodutibilidade do equipamento foram em geral satisfatórias. Porém, algumas regiões de interesse devem ser evitadas, como a do tronco. A redução do perímetro da borda não modificou os resultados fornecidos pelo equipamento. A temperatura apresentou um leve efeito sobre os resultados, no entanto é necessária uma grande variação de temperatura para gerar uma pequena variação nos resultados DXA. A variação da espessura de uma amostra com composição constante foi um dos fatores que mais influenciaram as medidas tomadas com o equipamento. Visto isso, a padronização de técnicas considerando esse fator é fundamental para viabilizar a utilização desta tecnologia. Os softwares avaliados foram o Total body e Small animal cada um com suas três configurações totalizando seis estudos. Os dois softwares puderam ser empregados para estimação da composição de tecidos dissecados. No entanto, quanto mais extensiva foi a dissecção menor foi a precisão do método. Assim, a estimação da quantidade de um determinado tecido em uma meia carcaça foi mais precisa do que a estimação da composição de mesmo tecido nos cortes primários. Através da calibração do método, foi possível obter modelos de tradução com boa acurácia e precisão para estimar a composição química e de tecidos dissecados. Além disso, medidas tomadas em uma condição puderam ser utilizadas para estimar a composição em outra. Assim, a digitalização da meia carcaça pode ser utilizada para estimar a quantidade de músculo da paleta, por exemplo. No entanto, quanto mais específica foi a medida maior foi a precisão da estimativa. Resultados precisos foram alcançados depois de pequenos ajustes metodológicos, uma vez que, os fatores de influência sobre os resultados foram quantificados e eram de fácil correção através de padronização dos métodos. A ferramenta DXA mostrou-se um importante instrumento para avaliação animal. Portanto, a DXA deve ser considerada em futuras pesquisas.
|
7 |
The Duke of Uncertainty -Aspects of Professional SkillAlsterdal, Lotte January 2001 (has links)
The Duke of Uncertainty - Aspects of Professional Skillis a dissertation whose title is a literary metaphor designedto draw attention to encounters with unforeseen problems anddilemmas at work. The first part of the dissertation presents the skill andtechnology tradition that has developed over the last twentyyears through explorative case studies. These have covered theskills of various occupational groups, such as processoperators in the paper-and-pulp and chemicals industries,managers and systems engineers working on real timeapplications in specialized knowledge intensive firms as wellas doctors and nurses. The theoretical perspective is the epistemology of skillfocusing on the phenomenon of tacit knowledge. This has itsroots in Wittgenstein's philosophy of language as developed bythe philosophers Allan Janik and Kjell S. Johannessen. The methodological framework develops indirect analogicalthinking which is a prerequisite for knowledge based onexperience, through exemplification. The empirical part of the work shows knowledge offamiliarity among members of an occupational group with lowformal training but extensive practical experience, namelyassistant nurses. A comparative analysis is undertaken inrelation to previous case studies in the field of skill andtechnology aimed at occupational groups with high formaleducational qualifications. A particular aspect to which attention is drawn is therhythm in work that unites occupational groups regardless ofeducational background. Occupational skill is treated as acapacity developed to find rhythm in action when confrontedwith situations that are hard to handle. The dissertationconsiders aspects that can be tried out in other occupationalarenas and paves the way for identifying phenomena in workinglife that hinder the development of rhythm in work. The dissertation contributes to the setting-up ofundergraduate-level training for groups of people who have notpreviously had access to higher education, and aims tointroduce new aspects into the development of analoguethinking. Key words: practical versus theoretical knowledge, skillof epistemology, tacit knowledge, comparative case study,literary metaphor, analogical thinking, indirect method,occupational training. / <p>NR 20140805</p>
|
8 |
Estudo, in vitro, da influência da técnica e do aparelho de fotopolimerização na resistência de união de pinos intra-radiculares / In vitro study of influence of technique and light curing unit in retention force of fiber post systemNagase, Denis Yudi 04 March 2010 (has links)
Objetivo: Este estudo se propõe a verificar a influencia do tipo de luz fotopolimerizadora na força de retenção de pinos intra-radiculares, tanto na técnica direta como na direta indireta. Métodos: 40 raízes de dentes bovinos com comprimento de 12 mm foram tratadas endodonticamente e divididas aleatoriamente em 4 grupos de acordo com a técnica de obtenção dos pinos e luz fotopolimerizadora (n=10): grupo 1 (técnica direta associada à lâmpada halogena); grupo 2 (técnica direta ao LED); grupo 3 (técnica direta-indireta associada à lampada halógena); e grupo 4 (técnica direta-indireta associada ao LED). A força de retenção foi determinada através do teste de tração usando Universal Testing Machine (Instron). Todos os dados foram analisados usando one-way analysis of variance (ANOVA) com a significância de p<0.05 e complementadas com teste de Tukey. Após o teste, as interfaces adesivas onde ocorreram as falhas foram examinadas e classificadas. Resultado: Os grupos 3 (246,05N ± 29,51) e 4 (241,60N ± 28,95) não apresentaram força de retenção estatisticamente diferente mas foram maiores que os grupos 1 (142,30N ± 25,60) e 2 (178,56N ± 25,67). A maior parte das fraturas ocorreu na interface dentina/resina. Conclusão: Com base nos resultados obtidos, concluímos que o método direto-indireto proporcionou a melhor retenção dos pinos de fibra de vidro. / Objectives: The purpose of this study is to verify the influence of light curing type on retention force of direct technique and direct-indirect technique. Methods: Fourth bovine single root teeth with 12mm of length were used in this study. The roots were endodontically treated and randomly divided in four groups according to the light curing unit and technique used: group 1(direct technique, halogen lamp), group 2(direct technique, LED), group 3(direct-indirect technique, halogen lamp), group 4(direct-indirect technique, lamp). The retention force was determined sing a Universal Testing Machine (Instron). All data were analyzed using one-way analysis of variance (ANOVA) and Tukey test. After the test, the failure was examined and classified according to the fracture place: post/ resin; resin/dentin; mix. Results: Group 3 (246,05N ± 29,51) and 4(241,60N ± 28,95)4 (95,18N) did not show statistically difference but presented higher retention force than group 1 (142,30N ± 25,60) and 2 (178,56N ± 25,67). Most of fracture occurred in interface between dentin/resin. Conclusion: Based on the obtained results, it was concluded that adhesive cementation technique influenced in the retention of glass fiber post.
|
9 |
Controle e gerenciamento de uma microrede com célula a combustível, painel fotovoltaico e armazenador de energia / Energy management and control of a microgrid using fuel cell, photovoltaic panel and energy storage deviceFuzato, Guilherme Henrique Favaro 15 July 2019 (has links)
O aprimoramento de técnicas e dispositivos aplicados à conversão de energia provenientes de fontes alternativas de energia, no contexto da geração distribuída, possui um papel importante para o estabelecimento definitivo de um novo paradigma de despacho e consumo de energia elétrica. Neste contexto, esta tese de doutorado aborda uma proposta de gerenciamento de energia e controle de uma microrede com célula a combustível e painel fotovoltaico como fontes primárias, operando juntamente com elementos armazenadores. Nesta proposta, destaca-se o uso de duas principais técnicas: droop k-sharing e Maximum Power Point Tracking with Saturation Technique (MPPT-ST). A técnica droop k-sharing permite associar uma dinâmica preestabelecida à célula a combustível, de forma que as baterias absorvam o espectro complementar. Adicionalmente, o uso da variável k-sharing com a adição da técnica droop permite o compartilhamento de potência entre as duas fontes sem a necessidade de comunicação entre elas. Já a técnica MPPT-ST, permite a operação de painéis fotovoltaicos no Maximum Power Point (MPP) e fora do MPP utilizando um saturador dinâmico. Por fim, propõe-se uma técnica para o acoplamento dos modelos dinâmicos dos conversores CC-CC por meio do equacionamento da tensão do barramento Corrente Contínua (CC) em espaços de estados, tornando possível analisar a estabilidade da microrede com o método indireto de Lyapunov. Para validar as técnicas propostas, são apresentados resultados de simulação e experimentais. / The improvement of techniques and devices applied to the energy conversion of alternative energy sources, in the distributed generation context, has an important role for the definitive establishment of the new paradigm of energy delivery and consumption. In this context, this PhD thesis addresses a proposal of an energy management strategy for microgrids with fuel cells and photovoltaic panels as primary sources, operating with storage devices. In the proposed control scheme, it is possible to highlight two control techniques: droop k-sharing and MPPT-ST. With the droop k-sharing technique, it is possible to design a specific dynamic behavior for the Fuel Cell, while the battery absorbs the complementary (high frequency) spectrum. Additionally, the use of the k-sharing variable with droop technique makes it possible to share the energy between the two sources without the need of a high-speed communication link. On the other hand, with the MPPT-ST technique, the photovoltaic modules can be operated in the MPP or off-MPP by using a simple dynamic anti-windup strategy. For the stability analysis using the Lyapunov Indirect Method, it is proposed a state space technique to couple the DC-DC converters models using the DC-link capacitor. Finally, to evaluate the proposed theoretical algorithm and analysis, simulations and experimental results are presented.
|
10 |
Estudo, in vitro, da influência da técnica e do aparelho de fotopolimerização na resistência de união de pinos intra-radiculares / In vitro study of influence of technique and light curing unit in retention force of fiber post systemDenis Yudi Nagase 04 March 2010 (has links)
Objetivo: Este estudo se propõe a verificar a influencia do tipo de luz fotopolimerizadora na força de retenção de pinos intra-radiculares, tanto na técnica direta como na direta indireta. Métodos: 40 raízes de dentes bovinos com comprimento de 12 mm foram tratadas endodonticamente e divididas aleatoriamente em 4 grupos de acordo com a técnica de obtenção dos pinos e luz fotopolimerizadora (n=10): grupo 1 (técnica direta associada à lâmpada halogena); grupo 2 (técnica direta ao LED); grupo 3 (técnica direta-indireta associada à lampada halógena); e grupo 4 (técnica direta-indireta associada ao LED). A força de retenção foi determinada através do teste de tração usando Universal Testing Machine (Instron). Todos os dados foram analisados usando one-way analysis of variance (ANOVA) com a significância de p<0.05 e complementadas com teste de Tukey. Após o teste, as interfaces adesivas onde ocorreram as falhas foram examinadas e classificadas. Resultado: Os grupos 3 (246,05N ± 29,51) e 4 (241,60N ± 28,95) não apresentaram força de retenção estatisticamente diferente mas foram maiores que os grupos 1 (142,30N ± 25,60) e 2 (178,56N ± 25,67). A maior parte das fraturas ocorreu na interface dentina/resina. Conclusão: Com base nos resultados obtidos, concluímos que o método direto-indireto proporcionou a melhor retenção dos pinos de fibra de vidro. / Objectives: The purpose of this study is to verify the influence of light curing type on retention force of direct technique and direct-indirect technique. Methods: Fourth bovine single root teeth with 12mm of length were used in this study. The roots were endodontically treated and randomly divided in four groups according to the light curing unit and technique used: group 1(direct technique, halogen lamp), group 2(direct technique, LED), group 3(direct-indirect technique, halogen lamp), group 4(direct-indirect technique, lamp). The retention force was determined sing a Universal Testing Machine (Instron). All data were analyzed using one-way analysis of variance (ANOVA) and Tukey test. After the test, the failure was examined and classified according to the fracture place: post/ resin; resin/dentin; mix. Results: Group 3 (246,05N ± 29,51) and 4(241,60N ± 28,95)4 (95,18N) did not show statistically difference but presented higher retention force than group 1 (142,30N ± 25,60) and 2 (178,56N ± 25,67). Most of fracture occurred in interface between dentin/resin. Conclusion: Based on the obtained results, it was concluded that adhesive cementation technique influenced in the retention of glass fiber post.
|
Page generated in 0.0354 seconds