In the pursuit of lower cost intumescent flame retardant (IFR) systems, the compound expandable graphite (EG) was identified. This compound delivers high flame retardant performance but provides non-uniform thermal shielding when exposed to open flame from below due to negative gravitational effects. It was theorised that this may be remedied either through ion exchange of the interstratified ions with low glass transition ions or through use in binary systems with other compounds. Two classes of commercial EG were identified, namely a low and a high expansion onset temperature EG compound. Extensive characterisation of each EG compound was undertaken to assess its composition, expansion mechanisms and onset temperatures in order to identify compatible compounds for binary use. The susceptibility of each compound to ion exchange was also assessed. An industrial IFR ethylenediamine phosphate (EDAP) and a novel flame retardant were synthesised for assessment in binary use with EG. Coupled with the above study, this project developed two novel fire testing techniques as low cost alternatives to well-established fire testing methods such as cone calorimetry. The first technique involved an open flame fire testing method which allowed vertical or horizontal testing. Digital and infrared (IR) video recording during operation facilitated comparison of multiple performance indicators further strengthening this method. The second technique allowed assessment of the mass loss resistance of each compound during laser pyrolysis. Characterisation of the EG compounds allowed development of structural models to describe each compound and explain the mechanisms of their expansion and gaseous release. Exhaustive ion exchange testing did not deliver favourable results, necessitating the pursuit of compounds for binary use with EG. A novel IFR was synthesised by neutralising 3,5-diaminobenzoic acid hydrochloride salt with ammonium dihydrogen phosphate. This compound, which melts at 257 °C, decomposes concurrently to release carbon dioxide gas which promotes intumescent charring. The flame retardant performance of this compound and EDAP as primary flame retardants and in combination with expandable graphite was evaluated. As a proof of concept, the novel compound was tested as a primary flame retardant using cone calorimetry after which its utility in binary systems with low temperature expandable graphite was tested. Substantial decreases in peak heat release rate (pHRR) and flame out time were achieved for all binary systems. This success led to testing of a number of combinations of low and high expansion onset EG and the other IFRs to identify the highest performing combination, which proved to be the 10-10 EDAP-EG system. Combinations of EG and the novel compound also showed excellent results. The novel fire testing techniques proved effective in identifying high performance combinations and showed comparable trends to those measured in cone calorimetry, at a greatly reduced cost and material requirement. IR analysis of open flame fire testing indicated increases in the temperatures required for ignition and burn through of the substrate. Observations, corroborated by optical video, showed that cohesive and uniform thermal shielding was achieved in all binary systems tested. This study illustrates that systems of 10% EG combined with either 10% DABAP or 10% EDAP are both the most economical binary systems tested but are extremely high performance systems as well. Both of these systems delivered excellent results while being more economic than the widely used industrial system with a 25-30% EDAP loading. It is recommended that these compounds be considered for industrial use. Furthermore, the effective fire testing techniques developed in this study may be utilised in future fire testing to identify high performance compounds at a lower cost prior to further assessment through methods such as cone calorimetry. / Thesis (PhD)--University of Pretoria, 2017. / Chemical Engineering / PhD / Unrestricted

Charles University Faculty of Science Study programme: Inorganic Chemistry Mgr. Barbora Hyklová Layered Transition Metal Hydroxides: Delamination and Properties Extended abstract Supervisor: Ing. Kamil Lang CSc., DSc. Supervisor-Consultant: RNDr. Jan Demel PhD. Prague, 2017 Layered transition-metal hydroxides have attracted increasing attention as promising active electrode materials for electrochemical energy storage and conversion device due to facile preparation and modification, good tunability, high capacitance capability, fast reversible redox reactions, and cost effectiveness. Many reported hierarchical architectures based on nickel and cobalt hydroxides are composed of bulky nanoplatelet-like aggregates; however, the nanomorphology and behavior of the separated hydroxide nanosheets is much less known. Figure 1. Scheme of layered nickel or cobalt hydroxide delamination and subsequent restacking on conductive HOPG support. In this respect, the dissertation thesis reports characterization and electrochemical performance of nickel, nickel-cobalt, and cobalt hydroxide nanosheets, synthesized by an economical and environmentally friendly method based on delamination of corresponding layered hydroxides in water (Figure 1). For this purpose, lactate and nitrate layered hydroxides were prepared by two...

京都大学 / 0048 / 新制・課程博士 / 博士(工学) / 甲第20000号 / 工博第4244号 / 新制||工||1657(附属図書館) / 33096 / 京都大学大学院工学研究科物質エネルギー化学専攻 / (主査)教授 安部 武志, 教授 作花 哲夫, 教授 阿部 竜 / 学位規則第4条第1項該当 / Doctor of Philosophy (Engineering) / Kyoto University / DFAM

京都大学 / 0048 / 新制・課程博士 / 博士(エネルギー科学) / 甲第20476号 / エネ博第345号 / 新制||エネ||69(附属図書館) / 京都大学大学院エネルギー科学研究科エネルギー社会・環境科学専攻 / (主査)教授 石原 慶一, 教授 野平 俊之, 准教授 奥村 英之 / 学位規則第4条第1項該当 / Doctor of Energy Science / Kyoto University / DFAM

京都大学 / 0048 / 新制・課程博士 / 博士(工学) / 甲第21783号 / 工博第4600号 / 新制||工||1717(附属図書館) / 京都大学大学院工学研究科物質エネルギー化学専攻 / (主査)教授 安部 武志, 教授 作花 哲夫, 教授 阿部 竜 / 学位規則第4条第1項該当 / Doctor of Philosophy (Engineering) / Kyoto University / DGAM

No description available.

The strength and success of the hydrogen economy relies heavily on the storage of hydrogen. Storage systems in which hydrogen is sequestered in a solid material have been shown to be advantageous over storage of hydrogen as a liquid or compressed gas. Many different types of materials have been investigated, yet the desired capacity and uptake/release characteristics required for implementation have not been reached. In this work, porphyrin aggregates were investigated as a new type of material for hydrogen storage. The building blocks of the aggregates are porphyrin molecules that are planar and can assume a face to face arrangement that is also known as H-aggregation. The H-aggregates were formed in solution, upon mixing of aqueous solutions of two different porphyrins, one carrying positively charged and the other one carrying negatively charged functional groups. The cationic porphyrin used was meso-tetra(4- N,N,N-trimethylanilinium) porphine (TAP) and it was combined with four different anionic porphyrins, meso-tetra(4-sulfonatophenyl)porphine (TPPS), meso-tetra(4-carboxyphenyl) porphine (TCPP), Cu(II) meso-tetra(4-carboxyphenyl) porphine, and Fe(III) meso-tetra(4- carboxyphenyl) porphine. The force of attraction that held two oppositely charged porphyrin molecules together was electrostatic attraction between the peripheral groups. Solid state aggregates were successfully isolated either by solvent evaporation or by centrifuging and freeze drying. TCPP-TAP and Cu(II)TCPP-TAP aggregates were shown to interact with hydrogen starting from 150 °C up to 250 °C. The uptake capacity was about 1 weight %. Although this value is very low, this is the first observation of porphyrin aggregates absorbing hydrogen. This opened the way for further research to improve hydrogen absorption properties of these iv materials, as well as other materials based on this model. Two other materials that are also based on planar building blocks were selected to serve as a comparison to the porphyrin aggregates. The first of those materials was metal intercalated graphite compounds. In such compounds, a metal atom is placed between the layers of graphene that make up the graphite. Lithium, calcium and lanthanum were selected in this study. Theoretical hydrogen capacity was calculated for each material based on the hydriding of the metal atoms only. The fraction of that theoretical hydrogen capacity actually displayed by each material increased from La to Ca to Li containing graphite. The weight % hydrogen observed for these materials varied between 0.60 and 2.0 %. The other material tested for comparison was KxMnO2, a layered structure of MnO2 that contained the K atoms in between oxygen layers. The hydrogen capacity of the KxMnO2 samples was similar to the other materials tested in the study, slightly above 1 weight %. This work has shown that porphyrin aggregates, carbon based and manganese dioxide based materials are excellent model materials for hydrogen storage. All three materials absorb hydrogen. Porphyrin aggregates have the potential to exhibit adjustable hydrogen uptake and release temperatures owing to their structure that could interact with an external electric or magnetic field. In the layered materials, it is possible to alter interlayer spacing and the particular intercalates to potentially produce a material with an exceptionally large hydrogen capacity. As a result, these materials can have significant impact on the use of hydrogen as an energy carrier.

Gastrulation is a fundamental process that reorganizes the primary germ layers to shape the internal and external features of an early embryo. Morphogenetic movements underlying this process can be classified into a variety of different types of cellular movements. I will focus on investigating in this thesis two types of cell movements in the dorsal mesoderm; mediolateral cell intercalation and convergence and extension. During gastrulation, mesoderm cells send protrusions to gain traction on neighboring cells and the surrounding extracellular matrix; a process called mediolateral cell intercalation. Mesoderm cells use this type of cell movement to converge and extend the dorsal mesoderm tissue during gastrulation; a process called convergence and extension. These morphogenetic movements are essential to form the early embryo and are important for later development. There are a number of different proteins involved in regulating the morphogenetic movements during gastrulation. The Planar Cell Polarity Signaling Pathway helps establish individual cell polarity and is activated in dorsal mesoderm cells undergoing convergence and extension. In addition, dorsal mesoderm cells migrate by using integrin receptors and the surrounding extracellular matrix to correctly position the mesoderm in the embryo. I will focus my efforts on analyzing the function of ADAM proteins during Xenopus laevis gastrulation. The ADAM family of metalloproteases is important for a variety of biological processes. ADAM proteins function as ectodomain sheddases by cleaving membrane bound proteins involved in signal transduction, cell-cell adhesion, and cell-extracellular matrix adhesion. I will focus on investigating the roles of two ADAM family members; ADAM13 and ADAM19 during gastrulation. Both ADAM13 and ADAM19 are expressed in the dorsal mesoderm during gastrulation. Throughout early embryonic development, ADAM13 is expressed in the somitic mesoderm and cranial neural crest cells. ADAM19 is expressed in dorsal, neural and mesodermal derived structures such as the neural tube, notochord, the somitic mesoderm, and cranial neural crest cells. Since ADAM13 and ADAM19 are expressed in similar tissues, I investigated if both proteins functionally interacted. I show that a loss of ADAM13 protein in the embryo reduces the level of ADAM19 protein by 50%. In the opposite experiment, a loss of ADAM19 protein in the embryo reduces the level of ADAM13 protein by 50%. This suggests that both ADAM13 and ADAM19 are required to maintain proper protein levels in the embryo. This might be explained through their physical interaction in a cell. The ADAM19 Proform binds to the ADAM13 Proform in cultured cells. Through domain analysis, I show that ADAM19 binds specifically to the cysteine-rich domain of ADAM13. When co-overexpressed in a cell, the level of Mature ADAM13 (compared to the Proform) is reduced suggesting a complex form of regulation. I propose a few hypothetical models that discuss how ADAM19 may function as a chaperone to stabilize and regulate the further processing of ADAM13 protein. Some of the unpublished work discussed in this thesis focuses on the roles of ADAM13 and ADAM19 in the dorsal mesoderm during gastrulation. Specific emphasis is made on investigating the axial mesoderm during notochord formation. I show that ADAM19 affects gene expression important for the A-P polarity of the notochord while ADAM13 does not. The changes in gene expression can be partially rescued by the EGF ligand Neuregulin1β, a known substrate for ADAM19 in the mouse. ADAM13 and ADAM19 are important for convergence and extension movements of the axial mesoderm during gastrulation. Specifically, a loss of ADAM13 or ADAM19 causes a delay in mediolateral cell intercalation resulting in a significantly wider notochord compared to control embryos. These defects occur without affecting dishevelled intracellular localization or the activation of the PCP signaling pathway. However, a loss of ADAM13 or ADAM19 reduces dorsal mesoderm cell spreading on a fibronectin substrate through α5β1 integrin. To conclude, the work presented in this thesis focuses on the similarities and differences of ADAM13 and ADAM19 in the early embryo. Although ADAM13 and ADAM19 are required for normal morphogenetic movements during gastrulation, my data suggests they have different functions. ADAM13 appears to function in regulating cell movements while ADAM19 appears to function in regulating cell signaling. I propose a few hypothetical models that discuss how each ADAM metalloprotease may function in the dorsal mesoderm and contribute to convergence and extension movements during gastrulation.>

Research into the processing conditions and parameters of polymeric nanocomposites has always been challenging to scientists and engineers alike. Many have developed tools and procedures to allow materials to be exploited and their properties improved with the addition of nanofillers to achieve the desired end material for various applications. Initial trials are mostly conducted using conventional small scale experiments using specialised equipment within the laboratory that can replicate the larger industrial equipment. This is a logical approach as it could save time and costs as many nanocomposites are relatively expensive to produce. Experiments have previously been done using the likes of the Haake twin screw extruder to manufacture nanocomposites within the laboratory but this research project has used a novel minimixer specifically developed to replicate mixing like large twin screw extrusion machines. The minimixer uses a twin paddle system for high shear mixing in conjunction with a single screw thus theoretically allowing an infinitely long recirculation. It is this ability to mix intensely whilst allowing for as long as desired recirculation which enables the replication in this very small mixer (10-30g capacity) of the mixing conditions in a large twin screw extruder. An added feature of the minimixer is that it can undertake inline data analysis in real time. The main experiments were conducted using a comprehensive DOE approach with several different factors being used including the temperature, screw speed, residence time, clay and compatibiliser loading and two polymer MFI¿s. The materials used included PP, Cloisite 20A, Polybond 3200, PET, Somasif MTE, Polyurethane 80A and Single / Multi-walled Carbon nanotubes. Detailed experimental results highlighted that rheological analysis of the nanocomposite materials as an initial testing tool were accurate in determining the Elastic and Loss modulus values together with the Creep and Recovery, Viscosity and Phase Angle properties in the molten state. This approach was also used in an additional set of experiments whereby the temperature, speed, residence time and compatibiliser were kept constant but the clay loading was increased in 1% wt. increments. These results showed that the G¿ & G¿¿ values increased with clay loading. Another important finding was the bi-axial stretching step introduced after the processing stage of the nanocomposite materials which highlighted a further improvement in the modulus values using rheological testing. Other tests included using inline monitoring to look into both the viscosity and ultrasound measurements in real time of the molten polymer nanocomposite through a slit die attachment to the minimixer. / EPSRC

京都大学 / 新制・課程博士 / 博士(エネルギー科学) / 甲第24853号 / エネ博第462号 / 新制||エネ||87(附属図書館) / 京都大学大学院エネルギー科学研究科エネルギー基礎科学専攻 / (主査)教授 野平, 俊之, 教授 萩原, 理加, 教授 佐川, 尚 / 学位規則第4条第1項該当 / Doctor of Energy Science / Kyoto University / DFAM