京都大学 / 新制・課程博士 / 博士(理学) / 甲第24424号 / 理博第4923号 / 新制||理||1703(附属図書館) / 京都大学大学院理学研究科地球惑星科学専攻 / (主査)教授 田口 聡, 教授 松岡 彩子, 教授 石岡 圭一 / 学位規則第4条第1項該当 / Doctor of Science / Kyoto University / DGAM

Establishing precise control over the unique beam parameters of laser-accelerated ions from relativistic ultra-short pulse laser-solid interactions has been a major goal for the past 20 years. While the spatio-temporal coupling of laser-pulse and target parameters create transient phenomena at femtosecond-nanometer scales that are decisive for the acceleration performance, these scales have also largely been inaccessible to experimental observation. Computer simulations of laser-driven plasmas provide valuable insight into the physics at play. Nevertheless, predictive capabilities are still lacking due to the massive computational cost to perform these in 3D at high resolution for extended simulation times. This thesis investigates the optimal acceleration of protons from ultra-thin foils following the interaction with an ultra-short ultra-high intensity laser pulse, including realistic contrast conditions up to a picosecond before the main pulse. Advanced ionization methods implemented into the highly scalable, open-source particle-in-cell code PIConGPU enabled this study. Supporting two experimental campaigns, the new methods led to a deeper understanding of the physics of Laser-Wake eld acceleration and Colloidal Crystal melting, respectively, for they now allowed to explain experimental observations with simulated ionization- and plasma dynamics. Subsequently, explorative 3D3V simulations of enhanced laser-ion acceleration were performed on the Swiss supercomputer Piz Daint. There, the inclusion of realistic laser contrast conditions altered the intra-pulse dynamics of the acceleration process significantly. Contrary to a perfect Gaussian pulse, a better spatio-temporal overlap of the protons with the electron sheath origin allowed for full exploitation of the accelerating potential, leading to higher maximum energies. Adapting well-known analytic models allowed to match the results qualitatively and, in chosen cases, quantitatively. However, despite complex 3D plasma dynamics not being reflected within the 1D models, the upper limit of ion acceleration performance within the TNSA scenario can be predicted remarkably well. Radiation signatures obtained from synthetic diagnostics of electrons, protons, and bremsstrahlung photons show that the target state at maximum laser intensity is encoded, previewing how experiments may gain insight into this previously unobservable time frame. Furthermore, as X-ray Free Electron Laser facilities have only recently begun to allow observations at femtosecond-nanometer scales, benchmarking the physics models for solid-density plasma simulations is now in reach. Finally, this thesis presents the first start-to-end simulations of optical-pump, X-ray-probe laser-solid interactions with the photon scattering code ParaTAXIS. The associated PIC simulations guided the planning and execution of an LCLS experiment, demonstrating the first observation of solid-density plasma distribution driven by near-relativistic short-pulse laser pulses at femtosecond-nanometer resolution. / Die Erlangung präziser Kontrolle über die einzigartigen Strahlparameter von laserbeschleunigten Ionen aus relativistischen Ultrakurzpuls-Laser-Festkörper-Wechselwirkungen ist ein wesentliches Ziel der letzten 20 Jahre. Während die räumlich-zeitliche Kopplung von Laserpuls und Targetparametern transiente Phänomene auf Femtosekunden- und Nanometerskalen erzeugt, die für den Beschleunigungsprozess entscheidend sind, waren diese Skalen der experimentellen Beobachtung bisher weitgehend unzugänglich. Computersimulationen von lasergetriebenen Plasmen liefern dabei wertvolle Einblicke in die zugrunde liegende Physik. Dennoch mangelt es noch an Vorhersagemöglichkeiten aufgrund des massiven Rechenaufwands, um Parameterstudien in 3D mit hoher Auflösung für längere Simulationszeiten durchzuführen. In dieser Arbeit wird die optimale Beschleunigung von Protonen aus ultradünnen Folien nach der Wechselwirkung mit einem ultrakurzen Ultrahochintensitäts-Laserpuls unter Einbeziehung realistischer Kontrastbedingungen bis zu einer Pikosekunde vor dem Hauptpuls untersucht. Hierbei ermöglichen neu implementierte fortschrittliche Ionisierungsmethoden für den hoch skalierbaren, quelloffenen Partikel-in-Zelle-Code PIConGPU von nun an Studien dieser Art. Bei der Unterstützung zweier Experimentalkampagnen führten diese Methoden zu einem tieferen Verständnis der Laser-Wake eld-Beschleunigung bzw. des Schmelzens kolloidaler Kristalle, da nun experimentelle Beobachtungen mit simulierter Ionisations- und Plasmadynamik erklärt werden konnten. Im Anschluss werden explorative 3D3V Simulationen verbesserter Laser-Ionen-Beschleunigung vorgestellt, die auf dem Schweizer Supercomputer Piz Daint durchgeführt wurden. Dabei veränderte die Einbeziehung realistischer Laserkontrastbedingungen die Intrapulsdynamik des Beschleunigungsprozesses signifikant. Im Gegensatz zu einem perfekten Gauß-Puls erlaubte eine bessere räumlich-zeitliche Überlappung der Protonen mit dem Ursprung der Elektronenwolke die volle Ausnutzung des Beschleunigungspotentials, was zu höheren maximalen Energien führte. Die Adaptation bekannter analytischer Modelle erlaubte es, die Ergebnisse qualitativ und in ausgewählten Fällen auch quantitativ zu bestätigen. Trotz der in den 1D-Modellen nicht abgebildeten komplexen 3D-Plasmadynamik zeigt die Vorhersage erstaunlich gut das obere Limit der erreichbaren Ionen-Energien im TNSA Szenario. Strahlungssignaturen, die aus synthethischen Diagnostiken von Elektronen, Protonen und Bremsstrahlungsphotonen gewonnen wurden, zeigen, dass der Target-Zustand bei maximaler Laserintensität einkodiert ist, was einen Ausblick darauf gibt, wie Experimente Einblicke in dieses bisher unbeobachtbare Zeitfenster gewinnen können. Mit neuen Freie-Elektronen-Röntgenlasern sind Beobachtungen auf Femtosekunden-Nanometerskalen endlich zugänglich geworden. Damit liegt ein Benchmarking der physikalischen Modelle für Plasmasimulationen bei Festkörperdichte nun in Reichweite, aber Experimente sind immer noch selten, komplex, und schwer zu interpretieren. Zuletzt werden daher in dieser Arbeit die ersten Start-zu-End-Simulationen der Pump-Probe Wechselwirkungen von optischem sowie Röntgenlaser mit Festkörpern mittels des Photonenstreu-Codes ParaTAXIS vorgestellt. Darüber hinaus dienten die zugehörigen PIC-Simulationen als Grundlage für die Planung und Durchführung eines LCLS-Experiments zur erstmaligen Beobachtung einer durch nah-relativistische Kurzpuls-Laserpulse getriebenen Festkörper-Plasma-Dichte, dessen Auflösungsbereich gleichzeitig bis auf Femtosekunden und Nanometer vordrang.

No description available.

A two-year experimental campaign is described during which diamond-like carbon and plastic targets with thicknesses from 20 nanometers to 15 micrometers were irradiated by the Texas Petawatt Laser. Target composition and thickness were varied to modify the specifics of the laser-matter interaction. Plasma mirrors were selectively implemented to affect the contrast of the laser system and provide additional control of the physical processes under investigation. A number of particle diagnostics were implemented to measure the distribution of laser accelerated ions and electrons. In addition, optical diagnostics were fielded to measure the intensity profile of the laser and measure the density of the target pre-plasma. The results of these experiments suggest that the Texas Petawatt laser pulse has pre-pulse and pedestal features with intensities at least 10⁻⁸ of the main pulse. Micronscale targets were able to survive these features and maintain a relatively sharp density gradient until the arrival of the main laser pulse, allowing for ion acceleration. Electron spectra measured in this configuration show an average temperature of 10 MeV, with no v angular dependence out to at least 60 degrees. By contrast, interferometric plasma density measurements and a lack of any observable ion acceleration suggest that nanoscale targets were destroyed well before the main pulse. In this case, the peak of the laser pulse interacted with a cloud of plasma between 10⁻³ and 10⁻² of critical density. The contrast improvement offered by the implementation of plasma mirrors was seen to increase the maximum energy of laser accelerated protons from targets thicker than 1 micrometer. In addition, the plasma mirrors allowed nanoscale targets to survive pre-pulse and pedestal features and support the production of ion beams. Proton spectra show that ions were accelerated to greater maximum energies from nanoscale targets than from more traditional micron-scale targets. This effect can be attributed to a reduction in the target pre-plasma scale length upon the introduction of plasma mirrors. These results indicate that the manipulation of target properties and laser contrast can significantly affect the interaction between an ultrahigh intensity laser and a target. / text

Free-electron lasers provide high intensity pulses with femtosecond duration and are ideal tools in the investigation of ultrafast processes in materials. Illumination of any material with such pulses creates extreme conditions that drive the sample far from equilibrium and rapidly convert it into high temperature plasma. The dynamics of this transition is not fully understood and the main goal of this thesis is to further our knowledge in this area. We exposed a variety of materials to X-ray pulses of intensities from 1013 to above 1017 W/cm2. We found that the temporal evolution of the resulting plasmas depends strongly on the wavelength and pulse intensity, as well as on material related parameters, such as size, density, and composition. In experiments on atomic and molecular clusters, we find that cluster size and sample composition influence the destruction pathway. In small clusters a rapid Coulomb explosion takes place while larger clusters undergo a hydrodynamic expansion. We have characterized this transition in methane clusters and discovered a strong isotope effect that promotes the acceleration of deuterium ions relative to hydrogen. Our results also show that ions escaping from exploding xenon clusters are accelerated to several keV energies. Virus particles represent a transition between hetero-nuclear clusters and complex biological materials. We injected single mimivirus particles into the pulse train of an X-ray laser, and recorded coherent diffraction images simultaneously with the fragmentation patterns of the individual particles. We used these results to test theoretical damage models. Correlation between the diffraction patterns and sample fragmentation shows how damage develops after the intense pulse has left the sample. Moving from sub-micron objects to bulk materials gave rise to new phenomena. Our experiments with high-intensity X-ray pulses on bulk, metallic samples show the development of a transient X-ray transparency. We also describe the saturation of photoabsorption during ablation of vanadium and niobium samples. Photon science with extremely strong X-ray pulses is in its infancy today and will require much more effort to gain more knowledge. The work described in this thesis represents some of the first results in this area.

Modern particle accelerators are a key component of today’s research landscape and indispensable in industry and medicine. In special application areas, the portfolio of these facilities will be expanded by laser-driven compact plasma accelerators that generate short, high-intensity pulses of ions with unique beam properties. Though intensely explored by the community, scaling the maximum beam energies of laser-driven ion accelerators to the required level is one of the most significant challenges of this field. This endeavor is inherently linked to a fundamental understanding of the underlying acceleration processes. The prospect to efficiently increase the beam energy relies on the ability to control the accelerating field structures beyond the well-established acceleration from the stationary target rear side. However, manipulating the interaction in such micrometer-sized accelerators proves to be challenging due to the transient nature of the plasma fields and requires precise tuning of the temporal laser pulse shape and the volumetric density distribution of the plasma target to a level that could so far not be achieved. This thesis investigates laser-proton acceleration using a cryogenic hydrogen target that combines the capabilities of predictive three-dimensional simulation and the in-situ realtime monitoring of the density distribution in the experiment to explore the fundamental physical principles of plasma based acceleration mechanisms. The corresponding experiments were performed at the DRACO laser facility at the Helmholtz-Zentrum Dresden-Rossendorf. The key to the success of these studies was the advancement of the cryogenic target system that generates a self-replenishing pure hydrogen jet. Using a mechanical chopping device, which protects the target system from the disruptive influence originating from the high-intensity interaction, allowed, for the first time, systematic experiments with a large number of laser shots in the harsh environment of the ultra-short pulse DRACO petawatt laser. The performance of a cylindrical hydrogen jet can be substantially optimized by a flexible all-optical tailoring of the target profile. Guided by real-time multi-color probing, the target density, the decisive parameter of the interaction, was scanned over two orders of magnitude allowing the exploration of different advanced acceleration regimes in a controlled manner. This approach led to the experimental realization of proton beams with energies up to 80 MeV and application relevant high particle yield from advanced acceleration mechanisms occurring in near-critical density plasmas, a regime so far mostly investigated in numerical studies. Besides cylindrical jets, the formation of thin hydrogen sheets was studied to gain insight into the fluid and crystallization dynamics that can be used to tailor the target shape for laser-proton acceleration. Using these jets, the onset of target transparency was explored, a regime that promises increased proton energies when optimized. Furthermore, after irradiation of the hydrogen jet with a high-intensity laser pulse, an unexpected axial modulation in the plasma density distribution was observed that can play a role in structuring the proton beam profile. This modulation is caused by instabilities that originate from the laser-plasma interaction, for example due to laser-driven return currents or the plasma expansion dynamics.

Proton sources driven by high-power lasers are a promising addition to the portfolio of conventional proton accelerators. Regarding particle cancer therapy, where tumours are irradiated with protons or ions, the novel accelerator technology can be particularly beneficial for translational research - the research branch in which results of basic research are transferred to new approaches for the prevention, diagnosis and treatment of cancer. The overarching aim in the thesis at hand was a translational pilot study to irradiate tumours on mice’s ears with laser-accelerated protons while achieving the quality level of conventional proton accelerators. This is the only way to compare the radiobiological data of the novel accelerator technology with those of the established ones. To enable such experiments a predetermined dose distribution according to the radiobiological model’s requirements must be delivered to a sample volume. Ergo, the laser-driven protons have to be transported and shaped after their initial acceleration. Intense laser-driven proton pulses, inherently broadband and highly divergent, pose a challenge to established beamline concepts on the path to application-adapted irradiation field formation, particularly for 3D. This work demonstrates the successful implementation of a highly efficient and tuneable pulsed dual solenoid setup to generate a homogeneous (laterally and in depth) volumetric dose distribution using only a single dose pulse from the broad laser-driven proton spectrum. The experiments using the ALBUS-2S beamline were conducted at the titanium:sapphire high-power laser Draco PW at the Helmholtz-Zentrum Dresden–Rossendorf. The beamline and its model were characterised and verified via independent methods, leading to first experimental studies providing volumetrically homogeneous dose distributions to detector targets as well as tumour and normal tissue in proof-of-concept studies. To perform the mouse pilot study, a new solenoid with cooling capacities was designed, characterised and implemented in the course of this thesis. The combination of the new solenoid and an overall performance improvement of the laser-proton accelerator, enabled the successful conduction of the mouse model study. The results show that laser-accelerated protons induce a comparable tumour growth delay as protons from conventional accelerators. This outcome and the demonstration of the flawless interaction between laser-proton accelerator, beam transport, dosimetry and biology qualify the laser-based accelerator technology for complex studies in translational cancer research. Looking into the future, their unique extremely high intensity renders them of particular interest for the investigation into the ultra-high dose rate regime. There, the so-called FLASH effect shows fewer side effects in normal tissue while maintaining the same effect in the tumour when the target dose is administered in milliseconds rather than minutes, as currently common. The ALBUS-2S setup at Draco PW already provides all necessary conditions to realise irradiation times of around ten nanoseconds in preclinical studies. This significantly expands the parameter space for investigating the FLASH effect and is presented as a proof-of-concept in this thesis. / Protonenquellen, die von Hochleistungslasern getrieben werden, sind eine vielversprechende Ergänzung zu herkömmlichen Protonenbeschleunigern. Im Hinblick auf die Partikeltherapie von Krebserkrankungen, bei der Tumoren mit Protonen oder Ionen bestrahlt werden, kann die neuartige Beschleunigertechnologie vor allem der translationalen Forschung von Nutzen sein, in der die Ergebnisse der Grundlagenforschung in neue Ansätze zur Vorsorge, Diagnose und Behandlung von Krebserkrankungen übertragen werden. Übergeordnetes Ziel der vorliegenden Arbeit war eine translationale Pilotstudie zur Bestrahlung von Tumoren an Mäuseohren mit laserbeschleunigten Protonen bei gleichzeitiger Erfüllung des Qualitätsniveaus konventioneller Protonenbeschleuniger. Mit den Ergebnissen ist ein Vergleich der strahlenbiologischen Daten der neuen und der etablierten Beschleunigertechnologie möglich. Um dieses Experiment zu realisieren, muss eine vorher festgelegte Strahlendosis, die den Anforderungen des radiobiologischen Modells entspricht, an ein Probenvolumen abgegeben werden. Die lasergetriebenen Protonenpulse müssen dafür nach ihrer Beschleunigung transportiert und geformt werden. Intensive lasergetriebene Protonenpulse sind von Natur aus breitbandig und stark divergent. Sie stellen eine Herausforderung für etablierte Beamline-Konzepte auf dem Weg zu einer anwendungsangepassten Bestrahlungsfeldbildung dar, insbesondere bei einer räumlichen Anwendung. Diese Arbeit zeigt die erfolgreiche Implementierung eines hocheffizienten und abstimmbaren gepulsten Zwei-Solenoid-Aufbaus zur Erzeugung einer homogenen (lateral und in der Tiefe) volumetrischen Dosisverteilung mit einem einzigen Dosispuls aus dem breiten lasergetriebenen Protonenspektrum. Die Experimente an der ALBUS-2S3 Beamline wurden am Titan:Saphir-Hochleistungslaser Draco4 PW am Helmholtz-Zentrum Dresden– Rossendorf durchgeführt. Die Beamline und ihr Modell wurden experimentell charakterisiert und mit unabhängigen Methoden verifiziert. Es konnten erste experimentelle Studien durchgeführt werden, bei denen volumetrisch homogene Dosisverteilungen auf Detektorziele sowie Tumor- und Normalgewebe in Proof-of-Concept Studien appliziert wurden. Für die Durchführung der Maus-Pilotstudie wurde im Rahmen dieser Arbeit ein neuer kühlbarer Solenoid entworfen, charakterisiert und implementiert. Zusammen mit einer allgemeinen Leistungsverbesserung des Laser-Protonen Beschleunigers wurde die Pilotstudie erfolgreich abgeschlossen. Sie zeigt, dass laserbeschleunigte Protonen eine vergleichbare Verzögerung des Tumorwachstums bewirken wie Protonen aus konventionellen Beschleunigern. Dieses Ergebnis und der Nachweis des einwandfreien Zusammenspiels von Laser- Protonen-Beschleuniger, Strahltransport, Dosimetrie und Biologie qualifizieren die laserbasierte Beschleunigertechnologie für komplexe Studien in der translationalen Krebsforschung. Mit Blick auf die Zukunft sind sie aufgrund ihrer einzigartigen, extrem hohen Intensität besonders interessant für die Untersuchung im Bereich ultrahoher Dosisleistungen. Dort zeigt der so genannte FLASH-Effekt weniger Nebenwirkungen im gesunden Normalgewebe bei gleicher Wirkung im Tumor. Die Zieldosis wird dabei innerhalb von Millisekunden verabreicht und nicht, wie derzeit üblich, innerhalb von Minuten. Der ALBUS-2S-Aufbau bei Draco PW bietet bereits alle notwendigen Voraussetzungen, um in präklinischen Studien Bestrahlungszeiten von etwa zehn Nanosekunden zu realisieren. Dies erweitert den Parameterraum für die Untersuchung des FLASH-Effekts erheblich und wird in dieser Arbeit auch als Proof-of-Concept vorgestellt.

De part ses nombreuses applications scientifiques et sociétales comme la radiographie protonique ou encore la protonthérapie, l’accélération d’ions par laser suscite un grand intérêt. Cette thèse s’inscrit dans ce cadre et présente une étude de l’interaction d’une impulsion laser d’intensité relativiste avec un plasma de densité modérée. Dans ce régime, le plasma est transparent à l’onde laser et les électrons oscillent à des vitesses relativistes dans le champ de l’onde incidente. Ces conditions sont favorables à un transfert efficace de l’énergie laser vers le plasma, et donc sont intéressantes pour l’accélération d’ions par laser. Ce régime permet également la création de solitons électromagnétiques et acoustiques dont les mécanismes de formation et les propriétés nécessitent une meilleur compréhension. Nous réalisons une étude détaillée de simulations Particle-In-Cell (réalisées avec le code OCEAN) de l’interaction d’une impulsion laser intense avec un plasma sous dense. Nous montrons que la diffusion Raman stimulée (SRS) dans le régime relativiste est le principal processus responsable de l’absorption de l’énergie laser par le plasma et qu’il est, en outre, très efficace puisqu’il permet de transférer près de 70 % de l’énergie de l’impulsion laser aux électrons. Cette instabilité apparaît dans des plasmas dont la densité est nettement supérieure à la densité quart-critique du fait de la diminution de la fréquence plasma électronique et se développe sur des temps très courts. Il permet ainsi un chauffage homogène des électrons tout le long de la propagation de l’impulsion laser à travers le plasma. Ces électrons participent à la détente du plasma, et créent sur ses bords raids un champ électrostatique permettant l’accélération des ions. Ces derniers gagnent 30 % de l’énergie laser initiale. Nous avons aussi développé un modèle simple qui permet de prédire et donc d’optimiser le taux de rétro-diffusion du plasma du fait du développement de l’instabilité SRS. Nous nous intéressons également à la séquence des processus permettant la formation des cavités électromagnétiques. Cette analyse souligne le rôle joué par l’instabilité modulationnelle ou de Benjamin-Feir sur le front de l’impulsion laser qui est divisée en un train de plusieurs solitons électromagnétiques. À l’aide d’une étude détaillée, nous montrons que ces solitons excitent des ondes plasmas dans leur sillage en se propageant dans le plasma, perdent de l’énergie et finissent par être piégés. Ils forment également des dépressions (cavités) des densités électroniques et ioniques du plasma. Ces cavités sont des pièges pour les champs électromagnétiques rayonnés par le plasma (par exemple du fait de l’instabilité SRS) et survivent grâce à un équilibre entre la pression de radiation des champs piégés et les pressions cinétiques électroniques à leurs bords. Ces cavités absorbent une part importante de l’énergie laser mais elles n’en conservent qu’une partie sous forme d’énergie électromagnétique piégée. Le reste de l’énergie permet l’expansion de la cavité, la génération de solitons acoustiques supersoniques et l’accélération de particules. / The laser-accelerated ions draw an increasing interest due to their potential applications and to their unique properties. This manuscript presents a study of the interaction between a relativistic intense laser pulse and a low density plasma. In this regime, the plasma is transparent to the laser pulse and electrons oscillate with relativistic velocities in the field of the incident wave. These conditions make the transfer of the laser pulse energy to the plasma efficient, and therefore are interesting for the ion acceleration. This regime generates also electromagnetic and acoustic solitons whose formation mechanisms and properties need to be better understood. We carry out a detailed analysis of Particle-In-Cell simulations (performed with the code OCEAN) of interaction of an intense laser pulse with a low density plasma.We show that the stimulated Raman scattering (SRS) is the main mechanism responsible for the absorption of laser energy in plasma. This process is very efficient : it leads to the transfer of 70 % of the laser pulse energy to electrons. This instability occurs in plasmas with a density larger than the quarter critical one due to the decrease of the electron plasma frequency and develops in a very short time scale. It leads to an homogeneous electron heating all along the distance of propagation of the laser pulse through the plasma. The ions are efficiently accelerated at the plasma edges and can get nearly 30%of the initial laser energy. This study is accompanied by a simple analytical model which is able to predict and so optimize the laser backscattering fraction due to the development of the SRS instability. We also present a sequence of stages which lead to the formation of electromagnetic cavities. This analysis highlights the role of the modulationnal or Benjamin-Feir instability in the front of the laser pulse, which is split in a train of electromagnetic solitons. Our detailed study shows that these solitons excite plasmas waves in their wake, lose energy and are finally trapped in the plasma. They lead to the formation of density depressions (cavities) which may trap the electromagnetic fields produced in the plasma (by the SRS instability, for example). These structures may survive for a long time thanks to an equilibrium of the trapped field radiation pressure and the electronic kinetic pressure at their borders. These cavities absorb an significant part of the laser energy but only a part of it is trapped inside. The remaining part is invested in the cavity expansion, generation of acoustic solitons and acceleration of charged particles.

This thesis presents results on the theoretical description of ion acceleration using ultra-short ultra-intense laser pulses. It consists of two parts. One deals with the very general and underlying description and theoretic modeling of the laser interaction with the plasma, the other part presents three approaches of optimizing the ion acceleration by target geometry improvements using the results of the first part. In the first part, a novel approach of modeling the electron average energy of an over-critical plasma that is irradiated by a few tens of femtoseconds laser pulse with relativistic intensity is introduced. The first step is the derivation of a general expression of the distribution of accelerated electrons in the laboratory time frame. As is shown, the distribution is homogeneous in the proper time of the accelerated electrons, provided they are at rest and distributed uniformly initially. The average hot electron energy can then be derived in a second step from a weighted average of the single electron energy evolution. This result is applied exemplary for the two important cases of infinite laser contrast and square laser temporal profile, and the case of an experimentally more realistic case of a laser pulse with a temporal profile sufficient to produce a preplasma profile with a scale length of a few hundred nanometers prior to the laser pulse peak. The thus derived electron temperatures are in excellent agreement with recent measurements and simulations, and in particular provide an analytic explanation for the reduced temperatures seen both in experiments and simulations compared to the widely used ponderomotive energy scaling. The implications of this new electron temperature scaling on the ion acceleration, i.e. the maximum proton energy, are then briefly studied in the frame of an isothermal 1D expansion model. Based on this model, two distinct regions of laser pulse duration are identified with respect to the maximum energy scaling. For short laser pulses, compared to a reference time, the maximum ion energy is found to scale linearly with the laser intensity for a simple flat foil, and the most important other parameter is the laser absorption efficiency. In particular the electron temperature is of minor importance. For long laser pulse durations the maximum ion energy scales only proportional to the square root of the laser peak intensity and the electron temperature has a large impact. Consequently, improvements of the ion acceleration beyond the simple flat foil target maximum energies should focus on the increase of the laser absorption in the first case and the increase of the hot electron temperature in the latter case. In the second part, exemplary geometric designs are studied by means of simulations and analytic discussions with respect to their capability for an improvement of the laser absorption efficiency and temperature increase. First, a stack of several foils spaced by a few hundred nanometers is proposed and it is shown that the laser energy absorption for short pulses and therefore the maximum proton energy can be significantly increased. Secondly, mass limited targets, i.e. thin foils with a finite lateral extension, are studied with respect to the increase of the hot electron temperature. An analytical model is provided predicting this temperature based on the lateral foil width. Finally, the important case of bent foils with attached flat top is analyzed. This target geometry resembles hollow cone targets with flat top attached to the tip, as were used in a recent experiment producing world record proton energies. The presented analysis explains the observed increase in proton energy with a new electron acceleration mechanism, the direct acceleration of surface confined electrons by the laser light. This mechanism occurs when the laser is aligned tangentially to the curved cone wall and the laser phase co-moves with the energetic electrons. The resulting electron average energy can exceed the energies from normal or oblique laser incidence by several times. Proton energies are therefore also greatly increased and show a theoretical scaling proportional to the laser intensity, even for long laser pulses.

Le plus fréquemment, l’interaction laser-matière est étudiée avec des lasers ayant des longueurs d’onde dans l’infrarouge proche (PIR), car ce sont les lasers qui peuvent générer les impulsions les plus intenses. Pour ces lasers, des cibles de densité allant de 0,05 à 2,5 fois la densité critique sont difficiles à créer mais elles offrent des perspectives intéressantes. Dans cette thèse, des jets d’hydrogène ayant de densité dans ce domaine sont utilisées dans le contexte de deux applications :Premièrement, des ions sont accélérées par choc non-collisionnel (collisionless shock acceleration, CSA). Lors de l’interaction d’une impulsion laser PIR avec une cible légè- rement sur-critique, un faisceau de protons est généré. Il est collimé, dirigé vers l’avant et quasiment monoénergetique. Des simulations indiquent que cela est lié à la formation d’un choc non-collisionnel et à l’accélération des protons par ce choc, en sus de leur accélération par le processus standard dit ”target normal sheath acceleration (TNSA)” qui est effectif en face arrière de la cible. Pour beaucoup d’applications, ces faisceaux de particules quasi-monoénergetiques sont plus appropriés que ceux à spectre large qui sont générés de façon routinière par TNSA.Deuxièmement, de l’énergie est transférée d’une impulsion laser (pump) vers une autre en contrepropagation (seed), par rétrodiffusion Brillouin stimulée, dans le régime de couplage fort (strong coupling-SBS), à des densités entre 0,05 et 0,2 fois la densité critique. Pour des impulsions à large bande (60 nanomètres), le rôle de la pré-ionisation sur la propagation et la rétrodiffusion Brillouin spontanée et stimulée est étudié, en incluant l’influence du chirp. Pour des lasers à bande plus étroite, il est démontré que l’impulsion seed peut être amplifiée par des dizaines de milliJoules, et des signatures d’amplification efficace et d’affaiblissement de l’impulsion laser pompe sont trouvées. Ce concept vise à l’amplification des impulsions laser à des puissances au-delà du seuil de dommage des amplificateurs laser basés sur des matériaux solides. / Laser-matter interaction is studied mostly with near-infrared (NIR) lasers as they can generate the most intense pulses. For these lasers, targets between 0.05 to 2.5 times the critical density are challenging to create but offer interesting prospects. In this thesis, novel high-density Hydrogen gas jet targets with densities in this range are used in view of two applications:First, ions are accelerated by collisionless shock acceleration (CSA). Upon interaction of a NIR laser with a slightly overcritical gas jet target, a collimated, quasi-monoenergetic proton beam is generated in forward direction. Simulations indicate the formation of a collisionless shock and acceleration of protons both by the shock and target normal sheath acceleration (TNSA) on the target rear surface under these conditions. These directed, monoenergetic particle bunches are more suitable for many applications than the broadband particle beams already generated routinely.Second, at densities between 0.05 and 0.2 times the critical density, energy is transferred from one laser pulse (pump) to a counterpropagating pulse (seed), via Stimulated Brillouin Backscattering in the strongly-coupled regime (sc-SBS). For the case of broad- band (60 nanometers) pulses, the role of the preionization for pulse propagation and both spontaneous and stimulated Brillouin backscattering are studied, including the influence of the chirp. It is shown that for narrower bandwidths, the seed pulse is ampli- fied by tens of millijoules, and signatures of efficient amplification and pump depletion are found. This concept aims at amplifying laser pulses to powers above the damage thresholds of solid state amplifiers.