Adsorption is a ubiquitous phenomenon that plays key roles in numerous applications including molecule separation, energy storage, catalysis, and lubrications. Since adsorption is sensitive to molecular details of adsorbate molecule and adsorbent materials, it is often difficult to describe theoretically. Molecular modeling capable of resolving physical processes at atomistic scales is an effective method for studying adsorption. In this dissertation, the adsorption of small molecules in three emerging materials systems: porous liquids, room-temperature ionic liquids, and atomically sharp electrodes immersed in aqueous electrolytes, are investigated to understand the physics of adsorption as well as to help design and optimize these materials systems. Thermodynamics and kinetics of gas storage in the recently synthesized porous liquids (crown-ether-substituted cage molecules dispersed in an organic solvent) were studied. Gas molecules were found to store differently in cage molecules with gas storage capacity per cage in the following order: CO2>CH4>N2. The cage molecules show selectivity of CO2 over CH4/N2 and demonstrate capability in gas separation. These studies suggest that porous liquids can be useful for CO2 capture from power plants and CH4 separation from shale gas. The effect of adsorbed water on the three-dimensional structure of ionic liquids [BMIM][Tf2N] near mica surfaces was investigated. It was shown that water, as a dielectric solvent and a molecular liquid, can alter layering and ordering of ions near mica surfaces. A three-way coupling between the self-organization of ions, the adsorption of interfacial water, and the electrification of the solid surfaces was suggested to govern the structure of ionic liquid near solid surfaces. The effects of electrode charge and surface curvature on adsorption of N2 molecules near electrodes immersed in water were studied. N2 molecules are enriched near neutral electrodes. Their enrichment is enhanced as the electrode becomes moderately charged but is reduced when the electrode becomes highly charged. Near highly charged electrodes, the amount of N2 molecules available for electrochemical reduction is an order of magnitude higher near spherical electrodes with radius ~1nm than near planar electrodes. The underlying molecular mechanisms are elucidated and their implications for development of electrodes for electrochemical reduction of N2 are discussed. / Doctor of Philosophy / Adsorption is a ubiquitous phenomenon that plays key roles in numerous applications including molecule separation, energy storage, catalysis, and lubrications. Since adsorption is sensitive to molecular details of adsorbate molecule and adsorbent materials, it is often difficult to describe theoretically. Molecular modeling capable of resolving physical processes at atomistic scales is an effective method for studying adsorption. In this dissertation, the adsorption of small molecules in three emerging materials systems: porous liquids, room-temperature ionic liquids, and atomically sharp electrodes immersed in aqueous electrolytes, are investigated to understand the physics of adsorption as well as to help design and optimize these materials systems. Thermodynamics and kinetics of gas storage in the recently synthesized porous liquids (crown-ether-substituted cage molecules dispersed in an organic solvent) were studied. Gas molecules were found to store differently in cage molecules with gas storage capacity per cage in the following order: CO2>CH4>N2. The cage molecules show selectivity of CO2 over CH4/N2 and demonstrate capability in gas separation. These studies suggest that porous liquids can be useful for CO2 capture from power plants and CH4 separation from shale gas. The effect of adsorbed water on the three-dimensional structure of ionic liquids [BMIM][Tf2N] near mica surfaces was investigated. It was shown that water, as a dielectric solvent and a molecular liquid, can alter layering and ordering of ions near mica surfaces. vi A three-way coupling between the self-organization of ions, the adsorption of interfacial water, and the electrification of the solid surfaces was suggested to govern the structure of ionic liquid near solid surfaces. The effects of electrode charge and surface curvature on adsorption of N2 molecules near electrodes immersed in water were studied. N2 molecules are enriched near neutral electrodes. Their enrichment is enhanced as the electrode becomes moderately charged but is reduced when the electrode becomes highly charged. Near highly charged electrodes, the amount of N2 molecules available for electrochemical reduction is an order of magnitude higher near spherical electrodes with radius ~1nm than near planar electrodes. The underlying molecular mechanisms are elucidated and their implications for development of electrodes for electrochemical reduction of N2 are discussed.

Ion-containing block copolymers blend ionic liquid properties with well-defined polymer architectures. This provides conductive materials with robust mechanical stability, efficient processability, and tunable macromolecular design. Conventional free radical polymerization and anion exchange achieved copolymers containing n-butyl acrylate and phosphonium ionic liquids. These compositions incorporated vinylbenzyl triphenyl phosphonium and vinylbenzyl tricyclohexyl phosphonium cations bearing chloride (Cl), or bis(trifluoromethane sulfonyl)imide (Tf2N) counteranions. Differential scanning calorimetry and dynamic mechanical analysis provided corresponding thermomechanical properties. Factors including cyclic substituents, counteranion type, as well as ionic concentration significantly influenced phosphonium cation association. 1, 1\'-(1, 4-Butanediyl)bis(imidazole) neutralized NexarTM sulfonated pentablock copolymers and produced novel electrostatically crosslinked membranes. Variable temperature FTIR and 1H NMR spectroscopy confirmed neutralization. Atomic force microscopy and small angle X-ray scattering studied polymer morphology and revealed electrostatic crosslinking characteristics. Tensile analysis, dynamic mechanical analysis, thermogravimetric analysis, and vapor sorption thermogravimetric analysis investigated polymer properties. The neutralized polymer demonstrated enhanced thermal stability, decreased water adsorption, and well-defined microphase separation. These findings highlight NexarTM sulfonated pentablock copolymers as reactive platforms for novel, bis-imidazolium crosslinked materials. 4-Vinylbenzyl piperidine is a novel styrenic compound that observably autopolymerizes. In situ FTIR spectroscopy monitored styrene and 4-vinylbenzyl piperidine thermal polymerizations. A pseudo-first-order kinetic treatment of the thermal polymerization data provided observed rate constants for both monomers. An Arrhenius analysis derived thermal activation energy values. 4-Vinylbenzyl piperidine exhibited activation energy 80 KJ/mol less than styrene. The monomer differs from styrene in its piperidinyl structure. Consequently, in situ FTIR spectroscopy also monitored styrene thermal polymerization with variable N-benzyl piperidine concentrations. Under these circumstances, styrene revealed activation energy 60 KJ/mol less than its respective bulk value. The similarities in chemical structure between styrene and 4-vinylbenzyl piperidine suggested thermally initiated polymerization occurred by the Mayo mechanism.  The unique substituent is proposed to offer additional cationic effects for enhancing polymerization rates. Living anionic polymerization of 4-vinylbenzyl piperidine achieved novel piperidinyl-containing polymers.  Homopolymer and copolymer architectures of this design offer structural integrity, and emphasize base stability.  Sequential anionic polymerization afforded a 10K g/mol poly(tert-butyl styrene-co-4-vinylbenzyl piperidine) diblock and a 50K poly(tert-butyl styrene-co-isoprene-co-4-vinylbenzyl piperidine) triblock. Alkylation studies involving a phosphonium bromide salt demonstrated the future avenues for piperidinium based polymer designs. These investigations introduce piperidinyl macromolecules as paradigms for a new class of ammonium based ionic materials. / Master of Science

A literature survey was performed to evaluate the state-of-the-art membrane systems for CO₂/CH₄ separation which is critical in the natural gas industry. The systems that were reviewed included zeolite, carbon, polymeric, mixed matrix, amorphous silica, and supported ionic liquid membranes. Supported ionic liquid CO₂/CH₄ selective membranes were synthesized in our laboratory by applying room temperature ionic liquids (RTILs) to porous inorganic α-alumina supports. The supported ionic liquid membranes (SILMs) displayed CO₂ permeance of 1x10⁻⁹ to 3x10⁻⁸ mol m⁻² s⁻¹ Pa⁻¹ and CO₂/CH₄ selectivity of up to 50 which is comparable with the current polymeric separation systems. It is concluded that, although the RTIL membranes showed good CO₂/CH₄ selectivity, the CO₂ permeance was too low for industrial applications. A new type of SILM was prepared by dissolving 1-aminopyridinium iodide which contained amine functionality in other ionic liquids which improved the CO₂ permeance and selectivity of these membranes. The H₂ gas separation is an important process because it has many industrial applications in petroleum processing and chemical synthesis. Amorphous silica membranes for H₂ separation were prepared on hollow fiber (HF) inorganic supports using chemical vapor deposition (CVD) of tetraethyl orthosilicate (TEOS). These membranes exhibited good H₂ permeance on the order of 10⁻⁷ mol m⁻² s⁻¹ Pa⁻¹ together with H₂/CO₂ selectivity of over 100. The separation was achieved using a new hybrid intermediate layer that was developed by depositing a mesoporous silica layer on top of γ-alumina. / Master of Science

No description available.

Thesis (MScEng)--Stellenbosch University. / ENGLISH ABSTRACT: Carbon dioxide (CO2) is classified as the main greenhouse gas (GHG) contributing to global warming. Estimates by the Intergovernmental Panel on Climate Change (IPCC) suggest that CO2 emissions must be reduced by between 50 to 85% by 2050 to avoid irreversible impacts. Carbon capture and storage (CCS) strategies can be applied to de-carbonize the emissions from fossil-fueled power plants. Compared to other CCS techniques, post-combustion capture (PCC) is most likely to be implemented effectively as a retrofit option to existing power plants. At present however CCS is not yet commercially viable. The main challenge with CCS is to reduce the inherent energy penalty of the CO2 separation stage on the host plant. Seventy-five to eighty percent of the total cost of CCS is associated with the separation stage. There are several technologies available for separating CO2 from power plant flue gas streams. Reactive absorption with aqueous amine solutions has the ability to treat low concentration, low pressure and large flux flue gas streams in industrial-scale applications. It is most likely to be the first technology employed commercially in the implementation of CCS. The energy required for solvent regeneration however, is high for the standard solvent used in reactive absorption processes, i.e. MEA. This leads to a reduction in thermal efficiency of the host plant of up to 15%. Alternative solvent formulations are being evaluated in an attempt to reduce the energy intensity of the regeneration process. The main objective of this study was to establish a novel, simplified thermodynamic method for solvent screening. Partial solubility parameters (PSPs) were identified as the potential basis for such a method. The major limitation of this approach is that the model doesn’t account for effects from chemical reaction(s) between materials, e.g. CO2 reacting with aqueous alkanolamine solutions; considering only the effects from dissolution. The EquiSolv software system was developed based on PSP theory. The Hansen 3-set PSP approach was used to describe the equilibrium behaviour of CO2 absorbing in task specific solvents. The Hansen theory was expanded to a 4-set approach to account for contributions from electrostatic interactions between materials. The EquiSolv program was used successfully to screen large sets of solvent data (up to 400 million formulations) in the search for suitable alternative solvent formulations for CO2 absorption. The secondary objective of this study was to evaluate the ability of the proposed PSP model to accurately predict suitable alternative solvents for CO2 absorption through preliminary experimental work. A series of CO2 absorption experiments were conducted to evaluate the absorption performance of predicted alternative solvent formulations. The predicted alternative solvent formulations exhibited a significant improvement in absorption performance (up to a 97% increase in the measured absorption capacity) compared to conventional solvent formulations. Statistical analysis of the experimental results has shown that there is a statistically significant concordant relationship between the predicted and measured rankings for the absorption performance of the predicted solvent formulations. Based on this it was concluded that PSP theory can be used to accurately predict the equilibrium behaviour of CO2 absorbing in task specific solvents. Recently ionic liquids (ILs) have been identified as potential alternatives to alkanolamine solutions conventionally used for CO2 absorption. Absorption experiments were conducted as a preliminary assessment of the absorption performance of ILs. Results have shown ILs to have significantly improved performance compared to conventional alkanolamine solvents; up to a 96% increase in the measured absorption capacity compared to conventional solvents. Future work should focus on developing task specific ionic liquids (TSILs) in an attempt to reduce the energy intensity of solvent regeneration in CO2 absorption processes. / AFRIKAANSE OPSOMMING: Koolsuurgas (CO2) word geklassifiseer as die vernaamste kweekhuis gas (GHG) wat bydra to globale verwarming. Beramings deur die Interregeringspaneel oor Klimaatsverandering (IPKV) toon aan dat CO2 emissies teen 2050 verminder moet word met tussen 50 en 85% om onomkeerbare invloede te vermy. Verskeie koolstof opvangs en bergings (KOB) strategieë kan toegepas word ten einde die koolstof dioksied konsentrasie in die emissies van kragstasies wat fossielbrandstowwe gebruik, te verminder. Naverbranding opvangs (NVO) is die mees aangewese KOB tegniek wat effektief toegepas kan word op bestaande kragstasies. Tans is KOB egter nog nie kommersieël lewensvatbaarvatbaar nie. Die hoof uitdaging wat KOB in die gesig staar is om die energie boete inherent aan die CO2 skeidingstap te verminder. Tussen vyf-en-sewentig en tagtig persent van die totale koste van KOB is gekoppel aan die skeidingstap. Daar is verskeie metodes beskikbaar vir die skeiding van CO2 uit die uitlaatgasse van kragstasies. Reaktiewe absorpsie met waterige oplossings van amiene kan gebruik word om lae konsentrasie, lae druk en hoë vloei uitlaatgasstrome in industriële toepassings te behandel. Dit is hoogs waarskynlik die eerste tegnologie wat kommersieël aangewend sal word in die toepassing van KOB. Die oplosmiddel wat normalweg vir reaktiewe absorpsie gebruik word (d.w.s. MEA) benodig egter ‘n groot hoeveelheid energie vir regenerasie. Dit lei tot ‘n afname in die termiese doeltreffendheid van die voeder aanleg van tot 15%. Alternatiewe oplosmiddelstelsels word tans ondersoek in ‘n poging om the energie intensiteit van die regenerasieproses te verminder. Die hoof doelwit van hierdie studie was om ‘n nuwe, ongekompliseerde termodinamiese metode te vestig vir die keuring van alternatiewe oplosmiddels. Parsiële oplosbaarheidsparameters (POPs) is geïdentifiseer as ‘n moontlike grondslag vir so ‘n metode. Die model beskryf egter slegs die ontbindings gedrag van materiale. Die effekte van chemise reaksie(s) tussen materiale, bv. die tussen CO2 en waterige oplossings van alkanolamiene, word nie in ag geneem nie. Die POP teorie het gedien as grondslag vir die ontwerp van die EquiSolv sagteware stelsel. Die Hansen stel van drie POPs is gebruik om die ewewigsgedrag te beskryf van CO2 wat absorbeer in doelgerig-ontwerpte oplosmiddels. Die Hansen teorie is verder uitgebrei na ‘n stel van vier POPs om die bydrae van elektrostatiese wisselwerking tussen materiale in ag te neem. Die EquiSolv program is verskeie kere met groot sukses gebruik vir die sifting van groot stelle data (soveel as 400 miljoen formulasies) in die soektog na alternatiewe oplosmiddels vir CO2 absorpsie. Die sekondêre doelwit van die studie was om die vermoë van die voorgestelde POP model om geskikte alternatiewe oplosmiddels vir CO2 absorpsie akkuraat te voorspel, te ondersoek deur voorlopige eksperimentele werk. ‘n Reeks CO2 absorpsie eksperimente is gedoen ten einde die absorpsie werkverrigting van die voorspelde alternatiewe oplosmidels te ondersoek. ‘n Verbetering in absorpsie werkverrigting van tot 97% is gevind vir die voorspelde oplosmiddels vergeleke met die van oplosmiddels wat tipies in die industrie gebruik word. Statistiese ontleding van die eksperimentele resultate het getoon dat daar ‘n beduidende ooreenstemming tussen die voorspelde en gemete rangskikking van die voorspelde oplosmiddels se werkverrigting bestaan. Dus kan POP teorie gebruik word om die absorpsie van CO2 in doelgerig-ontwerpte oplosmiddels akkuraat te beskryf. Ioniese vloeistowwe (IVs) is onlangs geïdentifiseer as moontlike alternatiewe oplosmidels vir die alkanolamien oplossings wat normaalweg gebruik word vir CO2 absorpsie. Absorpsie eksperimente is gedoen ten einde ‘n voorlopige raming van die absorpsie werkverrigting van IVs te bekom. Daar is bevind dat IVs ‘n beduidende verbetering in werkverrigting toon in vergelyking met die alkanolamien oplosmiddels wat normaalweg gebruik word. ‘n Verbetering in absorpsie werkverrigting van tot 96% is gevind vir die voorspelde IV-bevattende oplosmiddels vergeleke met die van oplosmiddels wat tipies in die industrie gebruik word. Die fokus van toekomstige navorsing moet val op die ontwikkeling van doelgemaakte ioniese vloeistowwe (DGIVs) in ‘n poging om die energie intensiteit van oplosmiddel regenerasie in CO2 absorpsie prosesse te verminder.

An exploration of some organic-inorganic hybrid metal fluorides and lanthanide containing metal organic frameworks (Ln-MOFs) has been carried out under ionothermal conditions. In this synthesis technique an ionic liquid (IL) or deep eutectic mixture (DES) is used as the solvent and in many cases as the provider of the organic structure directing agent. A wide range of ILs and DESs have been investigated as the reaction solvent for the synthesis of organically templated vanadium fluorides and oxyfluorides (VOFs), and initially this has proved to be successful with the isolation of 13 phases, including eight new materials. In the VOFs synthesis the IL acts as a solvent, however the DES acts as a solvent and also as a template delivery agent, where the expected template is provided by the partial breakdown of the urea derivative component. Interestingly, it has been shown that the same structure can be accessible via two different ways; either by using IL with an added templating source, or simply through the use of a DES without any other additive; since the template is provided by the in situ breakdown of the DES. The synthesis of VOFs with extended structures was achieved by the use of the hydrophobic IL 1-ethyl-3-methylimidazolium bis(trifluoromethylsulfonyl)imide (EMIM Tf₂N) as the solvent. [HNC₅H₅][V₂O₂F₅] represents the first VOF with a 2D network that contains exclusively V⁴⁺. This material may be considered as arising via condensation of the previously known ladder-like chains. Furthermore, using imidazole as an added template has produced another layer material that has significant similarities to the [HNC₅H₅][V₂O₂F₅] structure, but with some key differences. Within the same system three other phases were also isolated, including two novel materials displaying the known ladder-type building units. Further investigations in the ionothermal synthesis of VOF using EMIM Tf₂N resulted in a successful synthesis of [NH₄]₂[HNC₇H₁₃][V₇O₆F₁₈], a novel material displaying a unique double layered topology featuring a S = ½ kagome type lattice of V⁴⁺ ions (d¹). Two of the V⁴⁺ based kagome sheets are pillared by V³⁺ ions to form a double layered structure templated by both ammonium and quinuclidinium cations. This compound exhibits a high degree of magnetic frustration, with significant antiferromagnetic interactions but no long range ordering was observed above 2 K. This material presents an interesting comparison to the famous Herbertsmithite, ZnCu₃(OH)₆Cl₂, and may provide an excellent candidate for realising a quantum spin liquid (QSL) ground state. Interestingly, in this system the use of EMIM Tf₂2N as a solvent produces mainly V⁴⁺-containing materials, despite the high reaction temperature (170 °C). This characteristic is unprecedented in VOFs synthesis, as rising the reaction temperature above 150 °C in other techniques (i.e. hydrothermal synthesis) would often result in further reduction of V⁴⁺ to V³⁺. Using the ionothermal technique in the synthesis of hybrid iron fluorides resulted in the isolation of three chain-type materials. Again, the IL acts as the solvent and the DES acts as the solvent and also as the template provider where the expected template is released by the partial breakdown of the urea derivative component of the DES. The synthesis of Ln-MOF using a choline chloride/ 1,3-dimethylurea deep eutectic mixture has produced three novel isostructural materials. Usually, in ionothermally prepared materials (i.e. zeolites) the urea portion of the DES is unstable and breaks down in situ to form ammonium or alkylammonium cations. In the ionothermal synthesis of Ln-MOF, 1,3-dimethyurea (DMU) remains intact and is occluded in the final structure. Using a choline chloride/ethylene glycol deep eutectic solvent led to the isolation of a Ln-MOF with interesting structural properties, however none of the DES components appeared in the final structure. These results demonstrate once more the usefulness and applicability of the ionothermal synthesis method and emphasise how this synthesis technique can be further extended and applied in the preparation of important structures with unique properties and functionalities.

Thermochemical water splitting cycles have been conceptualized and researched for over half a century, yet to this day none are commercially viable. The heavily studied Sulfur-Iodine cycle has been stalled in the early development stage due to a difficult HI-H₂O separation step and material compatibility issues. In an effort to avoid the azeotropic HI-H₂O mixture, an imidazolium-based ionic liquid was used as a reaction medium instead of water. Ionic liquids were selected based on their high solubility for SO₂, I₂, and tunable miscibility with water. The initial low temperature step of the Sulfur-Iodine cycle was successfully carried out in ionic liquid reaction medium. Kinetics of the reaction were investigated by I₂ colorimetry. The reaction also evolved H₂S gas, which led to the conceptual idea of a new Sulfur-Sulfur thermochemical cycle, shown below: / 4I₂(l)+4SO₂(l)+8H₂O(l)↔4H₂SO₄(l)+ 8HI(l) / 8HI(l)+H₂SO₄(l)↔ H₂S(g)+4H₂O(l)+4I₂(l) / 3H₂SO₄(g)↔ 3H₂O(g)+3SO₂(g)+1½O₂(g) / H₂S(g)+2H₂O(g)↔ SO₂(g)+3H₂(g) / The critical step in the Sulfur-Sulfur cycle is the steam reformation of H₂S. This highly endothermic step is shown to successfully occur at temperatures in excess of 800˚C in the presence of a molybdenum catalyst. A parametric study varying the H₂O:H₂S ratio, temperature, and residence time in a simple tubular quartz reactor was carried out and Arrhenius parameters were estimated. All reactive steps of the Sulfur-Sulfur cycle have been either demonstrated previously or demonstrated in this work. A theoretical heat-to-hydrogen thermal efficiency is estimated to be 55% at a hot temperature of 1100 K and 59% at 2000 K. As a highly efficient, all-fluid based thermochemical cycle, the Sulfur-Sulfur cycle has great potential for feasible process implementation for the transformation of high quality heat to chemical energy. / Graduation date: 2012

Les Liquides Ioniques [LI] à température ambiante forment une nouvelle classe de matériaux, prometteurs dans des applications diverses. Les avantages que les LI soulèvent par rapport aux autres liquides moléculaires ou sels fondus résident dans la facilité à changer leurs propriétés intrinsèques en jouant sur la nature chimique de la combinaison [cation-anion]. Cependant, on n’est pas encore près à prédire les propriétés d’un LI en connaissant uniquement sa composition chimique. Par conséquent, nous avons fait des expériences de diffraction de rayons-x et de neutrons, complétées par une série de simulations de dynamiques moléculaires sur une famille de LI à bases de cations d’alkyl-methylimidazolium et d’anion Bromure. Ainsi, en changeant la longueur de la chaine alkyl, nous avons comparé la structure et la dynamique de trois LI de chaines ethyl, butyl et hexyl. La comparaison des résultats structuraux obtenus par la simulation avec ceux des rayons-x donnèrent complète satisfaction. Des résultats intéressants ont été obtenus, spécialement ceux issus de la comparaison de la structure et la dynamique du LI 1-ethyl-3-methylimidazolium Bromide en phase cristalline et liquide. Par ailleurs, l’hétérogénéité en phase volumique a pu être quantifiée ce qui a permis de déterminer que la ségrégation augmente avec la longueur de la chaine alkyl cationique. / Room temperature ionic liquids constitute a class of materials with many promising applications in very diverse fields. Their potentiality stems from the fact that their properties are very different from those of typical molecular solvents and furthermore they can be tailored by modifying the combination of ions forming the liquid. However it is not yet possible to predict which species will produce a particular set of properties. Therefore we have done a systematic computer simulation study on a series of three room temperature ionic liquids based on the alkyl-methylimidazolium cation combined with the bromium anion. The length of the alkyl chain of the cation and the anions has been increased progressively, going from ethyl to butyl and hexyl, in order to explore the structural and dynamical changes brought about by such change. Simulation results are also compared satisfactorily to high-energy x-ray diffraction and quasi elastic neutron scattering data obtained by us. Our results show that the structure of liquid 1-ethyl-3methylimidazolium Bromide presents large similarities with the crystal one. This resemblance appears also when the local dynamics of the ethyl chain is investigated using neutron spectroscopy. Moreover we have quantified the heterogeneity found in the bulk state, finding that segregation is favored by the length of the cation’s alkyl chain.

Amperometric gas sensors are widely used for environmental and industrial monitoring. They are sensitive and cheap but suffer from some significant limitations. The aim of the work undertaken in this thesis is the development of ‘intelligent’ gas sensors to overcome some of these limitations. Overall the thesis shows the value of ionic liquids as potential solvents for gas sensors, overcoming issues of solvent volatility and providing a wide potential range for electrochemical measurements. Methods have been developed for sensitive amperometry, the tuning of potentials and especially proof-of-concept (patents Publication numbers: WO2013140140 A3 and WO2014020347 A1) in respect of the intelligent self-monitoring of temperature and humidity by RTIL based sensors. Designs for practical electrodes are also proposed. The specific content is as follows. Chapter 1 outlines the fundamental principles of electrochemistry which are of importance for the reading of this thesis. Chapter 2 reviews the history and modern amperometric gas sensors. Limitations of present electrochemical approaches are critically established. Micro-electrodes and Room Temperature Ionic Liquids (RTILs) are also introduced in this chapter. Chapter 4 is focused on the study of analysing chronoamperometry using the Shoup and Szabo equation to simultaneously determine the values of concentration and diffusion coefficient of dissolved analytes in both non-aqueous and RTIL media. A method to optimise the chronoamperometric conditions is demonstrated. This provides an essential experimental basis for IL based gas sensor. Chapter 5 demonstrates how the oxidation potential of ferrocene can be tuned by changing the anionic component of room temperature ionic liquids. This ability to tune redox potentials has genetic value in gas sensing. Chapters 6 and 7 describe two novel patented approaches to monitor the local environment for amperometric gas detection. In Chapter 6, an in-situ voltammetric ‘thermometer’ is incorporated into an amperometric oxygen sensing system. The local temperature is measured by the formal potential difference of two redox couples. A simultaneous temperature and humidity sensor is reported in Chapter 7. This sensor shows advantageous features where the temperature sensor is humidity independent and vice versa. The Shoup and Szabo analysis (Chapter 4) requires ‘simple’ electron transfer and as such the reduction of oxygen in wet RTILs can be complicated by dissolved water. Chapter 8 proposes a method to stop oxygen reduction at the one electron transfer stage under humid conditions by using phosphonium based RTILs to ‘trap’ the intermediate superoxide ions. Chapters 9 and 10 report the fabrication of low cost disposable electrodes of various geometries and of different materials. The suitability of these electrode for use as working electrodes for electrochemical experiments in aqueous, non-aqueous and RTIL media is demonstrated. Their capability to be used as working probes for amperometric gas sensing systems is discussed.

L'une des préoccupations de la chimie moderne est de développer des procédés éco-compatibles : une tendance consiste à remplacer les solvants organiques par les Liquides Ioniques (LI). Ainsi ces travaux décrivent l'utilisation des LI dans deux réactions à économie d'atomes : l'addition de Michael et la réaction de cycloaddition 1,3-dipolaire catalysée (ou non) par un sel de cuivre (CuAAC). La première partie des travaux relate l'emploi de Liquides Ioniques Super-Acides (LISA), connus pour générer une activation électrophile. Une optimisation du LISA a été effectuée sur une réaction-modèle, puis l'application à d'autres électrophiles et nucléophiles a été étudiée. La pureté du LISA influe sur la chimiosélectivité : s’il est partiellement hydrolysé, la réaction d'annélation de Robinson devient prépondérante. La version asymétrique du processus a été abordée, montrant qu'il est possible d'obtenir un excès énantiomérique à partir de dérivés d'acides aminés. La seconde partie de l'étude a permis de mettre au point une synthèse de (triazolylméthyl)vinylphosphonates à partir d'un acétoxyméthylvinylphosphonate selon une procédure monotope reposant sur la cycloaddition 1,3-dipolaire dans différents LI. Nous avons ensuite montré que le LI joue aussi le rôle d'activateur pour cette réaction. / In the context of sustainable chemistry, an alternative to conventional organic solvents is the use of ionic liquids. These works reported here aims to describe the use of ionic liquids (IL) in two atoms economy reactions, namely the Michael addition reaction and 1,3-dipolar cycloaddition catalyzed (or not) by a copper salt (CuAAC). In the first part of the work reports the use of Super-Acid Ionic Liquids (SAIL), which initiate an electrophilic activation. After optimization of SAIL on a reaction model, application to other electrophiles and nucleophiles is discussed. The purity of SAIL affects the chemioselectivity: if the SAIL is partially hydrolyzed, a Robinson annulation predominates. The asymmetric version of the process is investigated, showing that it is possible to carry out an enantioselective reaction with amino acid derived SAIL. The second part of the study deals with setting up an original synthesis of (triazolylmethyl)vinylphosphonate from acetoxymethylvinylphosphonate using a one-pot procedure involving a 1,3-dipolar cycloaddition in different LI. We further showed that the ionic liquid can also act as an activator for this reaction.