京都大学 / 0048 / 新制・課程博士 / 博士(理学) / 甲第20192号 / 理博第4277号 / 新制||理||1615(附属図書館) / 京都大学大学院理学研究科化学専攻 / (主査)教授 依光 英樹, 教授 丸岡 啓二, 講師 西村 貴洋 / 学位規則第4条第1項該当 / Doctor of Science / Kyoto University / DGAM

京都大学 / 0048 / 新制・課程博士 / 博士(工学) / 甲第20411号 / 工博第4348号 / 新制||工||1674(附属図書館) / 京都大学大学院工学研究科合成・生物化学専攻 / (主査)教授 杉野目 道紀, 教授 村上 正浩, 教授 中尾 佳亮 / 学位規則第4条第1項該当 / Doctor of Philosophy (Engineering) / Kyoto University / DGAM

京都大学 / 0048 / 新制・課程博士 / 博士(理学) / 甲第20944号 / 理博第4396号 / 新制||理||1631(附属図書館) / 京都大学大学院理学研究科化学専攻 / (主査)教授 依光 英樹, 教授 丸岡 啓二, 教授 大須賀 篤弘 / 学位規則第4条第1項該当 / Doctor of Science / Kyoto University / DGAM

京都大学 / 新制・課程博士 / 博士(工学) / 甲第24148号 / 工博第5035号 / 新制||工||1786(附属図書館) / 京都大学大学院工学研究科合成・生物化学専攻 / (主査)教授 杉野目 道紀, 教授 大江 浩一, 教授 中尾 佳亮 / 学位規則第4条第1項該当 / Doctor of Philosophy (Engineering) / Kyoto University / DGAM

Borides are implemented in a range of industrial applications due to their unique mechanical, electrical, thermal and catalytic properties. In particular, transition metal diborides are of special interest. In the recent years, borides of rhenium (Re), osmium (Os) and iridium (Ir) have been studied as for their ultra-hardness and superior stiffness. In this dissertation, a mechanochemical method is introduced to produce rhenium diboride (ReB2) powder, a novel hexagonal osmium diboride (h-OsB2), and iridium boride powders. Densification by Spark Plasma Sintering (SPS), thermal stability and mechanical properties of h-OsB2 were also studied. ReB2 was recently reported to exhibit high hardness and low compressibility, which both are strong functions of its stoichiometry, namely Re to B ratio. Most of the techniques used for ReB2 synthesis reported 1:2.5 Re to B ratio because of the loss of the B during high temperature synthesis. However, as a result of B excess, the amorphous boron, located along the grain boundaries of polycrystalline ReB2, would degrade the ReB2 properties. Therefore, techniques which could allow synthesizing the stoichiometric ReB2 preferably at room temperature are in high demand. ReB2 powder was synthesized at low temperature using mechanochemical route by milling elemental crystalline Re and amorphous B powders in the SPEX 8000 high energy ball mill for 80 hours. The formation of boron and perrhenic acids are also reported after ReB2 powder was exposed to the moist air environment for a twelve month period of time. Hexagonal osmium diboride (h-OsB2), a theoretically predicted high-pressure phase, has been synthesized for the first time by a mechanochemical method, i.e., high energy ball milling. X-ray diffraction (XRD) indicated the formation of h-OsB2 after 2.5 hours of milling, and the reaction reaches equilibrium after 18 hours of milling. The lattice parameters of the h-OsB2 are a=2.916Å and c=7.376 Å, with a P63/mmc space group. Transmission electron microscopy confirmed the appearance of the h-OsB2 phase. The thermal stability of h-OsB2 powder was studied by heating under argon up to 876 °C and cooling in vacuo down to -225 °C. The oxidation mechanism of h-OsB2 has also been proposed. The hexagonal phase partially converted to the orthorhombic phase (20 wt.%) after spark plasma sintering of h-OsB2 at 1500°C and 50MPa for 5 minutes. Hardness and Young*s modulus of the h-OsB2 were measured to be 31 ± 9 GPa and 574 ± 112 GPa, respectively by nanoindentation method. Prior to this research a number of compounds have been prepared in Ir-B system with lower than 2 boron stoichiometry, and no IrB2 phases have been synthesized experimentally. In this dissertation, three new iridium boride phases, ReB2-type IrB2, AlB2-type IrB2 and IrB have been synthesized with a similar mechanochemical method. The formation of these three phases has been confirmed by both X-ray diffraction (XRD) and transmission electron microscope (TEM) after 30 hours of ball milling and 48 hours of annealing. The IrB2 phases have hexagonal crystal structures and the new IrB phase has an orthorhombic crystal structure. The segregation of iridium from iridium borides* lattices has also been studied by high resolution TEM.

<p> Wet chemical neutron activation analysis procedures for Au., Pd and Ir together with a non-destructive gamma-counting procedure for Mn are described and applied to the determination of these metals in three Antarctic (E21 -17, E13-3 and E 17-10) and one Caribbean (P63 04-9) deep-sea cores. A total of 49 samples were analyzed. The average values of Au, Pd, Ir in ppb and Mn in Wt.% (together with standard deviations of the mean are: (see table in theses) No large differences exist between Au, Pd and Ir concentrations in different types of deep-sea sediments nor in cores from different areas and their values are within the general concentration range found in most crustal rocks. A general discussion of the sources of precious metals in deep-sea sediments is given. The most important precious metal source in the cores studied in this work is detrital material from land. The contribution of extraterrestrial material to the Au and Pd content of deep-sea sediments is not important but in cores with depositional rates as low as a few tenths of a mm per thousand years, extraterrestrial material may account for more than half of the total Ir content. From the non-detrital Ir content of deep-sea manganese nodules the accretion rate of extraterrestrial material over the. entire surface of the earth is calculated to be about 200 tons per day with an upper limit of 310 tons per day. The constancy of Ir content in deep-sea cores as a function of depth suggests that the influx of extraterrestrial material during the past 3 to 4 million years was probably fairly constant. </p> / Thesis / Master of Science (MSc)

The reaction barrier and heat of formation of the various dehydrogenation reactions involved in the steam reforming of ethane is a critical concern in the applications and understanding of these reactions. Focusing on Ir-based catalyst, we report a comprehensive reaction network of dehydrogenation of ethane on Ir(100) based on extensive density functional theory calculations performed on 10 C-H bond cleavage reactions, utilizing the Vienna Ab Initio Package codes. The geometric and electronic structures of the adsorption of C2Hx species with corresponding transition-state structures is reported. We found that the C-H bond in CH3C required the most energy to activate, due to the most stable four-fold hollow adsorption site configuration. Ethane can easily dissociate to CH3CH and CH2CH2 on Ir(100) and further investigation of surface temperature dependence will contribute to the research effort in this area. By using the degree of dehydrogenation of the reactant species as a variable to correlate the C-H bond cleavage barrier as well as reaction energy. DFT studies reveal that the surface Ir(100) to a great extent promotes ethane dehydrogenation when compared to other surfaces.

In the area of sustainable energy, a major focus has been to design robust electrocatalysts that can be used for the electrolysis of water to produce H2 with a sustainable energy source such as solar. Sustainable H2 generation would potentially be a prelude to the adoption of a hydrogen economy, allowing the phasing out of fossil fuels as a primary fuel source. Toward this end, there is a global research effort to develop electrocatalysts that would facilitate the kinetics of the two half-reactions that make up the water-splitting process: the anodic oxygen evolution reaction (OER) and the cathodic hydrogen evolution reaction (HER). A challenge is to develop active electrocatalysts that are largely composed of earth-abundant elements and show catalytic stability during water splitting at low pH, where the scientific community feels that commercial electrolysis will operate most efficiently. Currently, iridium oxide (IrO2) is being looked at for low pH water splitting because of its stability at low pH, but its relative scarcity (e.g., it is a precious metal) may well make it an unacceptable choice in the long run.In this dissertation, we focus on understanding the scientific issues that will allow the development of earth-abundant catalysts that contain a loading of Ir that is low as possible, while maintaining suitable activity and stability. We began by synthesizing a series of Ir-based OER electrocatalysts by incorporating varying amounts of Ir into 2D layered MnO2 (birnessite, nominally δ-MnO2) and 3D MnO2 (pyrolusite, β-MnO2) phases. The Ir-incorporated δ-MnO2 (Ir/δ-MnO2) electrocatalysts with 16-22 wt% Ir were synthesized by a wet chemical method using a ligating agent, such that Ir was present on the surface and partially intercalated into the interlayer of δ-MnO2. Ir-incorporated β-MnO2 (Ir/β-MnO2) was prepared for the first time via a thermally induced phase transition of Ir/δ-MnO2. This phase transition of δ-MnO2 to β-MnO2 was facilitated by the presence of Ir in the structure, as both Ir in IrO2 and Mn in β-MnO2 could adopt the more thermodynamically stable rutile structure. Extended X-ray absorption fine structure (EXAFS) of Ir/β-MnO2 showed that the catalyst consisted of Ir substituted into the crystalline β-MnO2 lattice, additionally, high-angle annular dark-field scanning transmission electron microscopy (HAADF-STEM) and scanning electron microscopy (SEM) imaging revealed micron-sized particles with non-uniform distribution of Ir in the MnO2. In 0.5 M H2SO4 electrolyte, 22 wt% Ir/β-MnO2 (60 〖μg〗_Ir cm_geo^(-2)) resulted in the most active catalyst with an η@10 (overpotential at 10 mA cm_geo^(-2)) of 337 mV and stability of 6 h. This electrocatalyst outperformed a commercial IrO2 on a per Ir mass basis. EXAFS, HAADF-STEM and X-ray absorption near edge structure (XANES) showed that 22 wt% Ir/β-MnO2 had a strained structure containing ~41% Mn3+, an OER active species, along with a modified Ir bonding due to the presence of Ir-O-Ir and Ir-O-Mn. Density functional theory (DFT) computation has demonstrated that this modified bonding environment in Ir/β-MnO2 has contributed to enhancing the thermodynamic stability of the structure. Furthermore, the literature suggests that the presence of Ir-O-Mn bond can favorably tune the d-orbital energy of Ir, enabling superior performance in the Ir/β-MnO2 compared to IrO2. The thesis research also included the investigation of the activity and stability of Ir/β-MnO2 that was synthesized via a novel strategy. The resulting material maintained a homogeneous distribution of Ir in the MnO2 lattice and exhibited excellent OER activity and stability. A surfactant-assisted (SA) synthesis method was carried out to achieve uniform doping of 22-28 wt.% Ir in 3D MnO2 (ramsdellite, R-MnO2). Upon annealing, Ir/R-MnO2 transformed to Ir/β-MnO2 (SA), composed of nano-sized particles. Electrochemical studies in 0.5 M H2SO4 showed that, Ir/β-MnO2 (SA) with 75.6 〖µg〗_Ir cm_geo^(-2) exhibited an η of 327 mV and exceptional stability (up to 50 h). At similar Ir mass loadings, the Ir/β-MnO2 (SA) outperformed Ir/R-MnO2 (SA) and commercial IrO2. This enhanced activity and stability was attributed to a thermodynamically stable structure composed of uniform distribution of Ir (Ir-O-Mn) in the MnO2 lattice. Overall, the research results presented in this dissertation contributed towards designing a novel class of Ir-MnO2 catalysts, which potentially will point the scientific community in the right direction for designing future noble metal-incorporated earth-abundant metal oxides for electrocatalytic energy conversion reactions. / Chemistry

No description available.

No description available.