L’objectif de cette thèse est d’appliquer la théorie du contrôle optimal à la dynamique de systèmes quantiques. Le premier point consiste à introduire dans le domaine du contrôle quantique des outils de contrôle optimal initialement développés en mathématique. Cette approche a ensuite été appliquée sur différent types de systèmes quantiques décrit par une grande ou une petite dimension. La première partie du manuscrit introduit les différents outils de contrôles utilisés avec une approche adaptée à un public de physiciens. Dans la seconde partie, ces techniques sont utilisées pour contrôler la dynamique des spins en RMN et IRM. La troisième partie s’intéresse au développement de nouveaux algorithmes itératifs de contrôle optimal appliqués au contrôle par champ laser de la dynamique rotationnelle des molécules linéaires en phases gazeuse ainsi qu’au développement d’une stratégie de contrôle simple permettant de délocaliser une molécule dans un plan. La quatrième partie traite le contrôle en temps minimum d’un condensat de Bose-Einstein à deux composantes. La dernière partie permet de comparer qualitativement et quantitativement les différentes méthodes de contrôle optimal utilisées. Les seconde et troisième parties ont également bénéficier de l’implémentation expérimentale des solutions de contrôle optimal obtenues. / The goal of this thesis is to apply the optimal control theory to the dynamics of quantum systems.The first part aim at introducing the tools of optimal control in quantum control which were initially developedin mathematics. This approch has been applied on different kinds of quantum system with small and largedimensions. The first part of this manuscript introduces the optimal control tools which are used with a pointof view suited to a public of physicists. In the second part these techniques are used to control the dynamics ofspins in NMR and MRI. The third part deals with the development of new iterative algorithms applied to thecontrol by laser fields of the rotational dynamics of linear molecules in a gaz phases and the development of asimple control strategy allowing to delocalize a molecule in a plan. The fourth part treats the time-minimumcontrol of a two-component Bose Einstein condensate. The last part compares the different optimal controlmethods used qualitatively and quantitatively. The solution found in the second and third parts have been alsoapplied experimentally.

This thesis deals with low level DC voltage measurement by three methods. First part of this thesis describes each method. It is about potentiometric method, reference step method and direct method. This thesis also describes Josephson voltage standard which was used for calibration nanovoltmeter and Zener reference. The theoretical part of this thesis also deals with the evaluation of key comparison data. The main goal of this thesis is the comparison of methods used to measure low level DC voltage. The practical part of the thesis deals with the implementation of measurement with all methods in cooperation with Czech metrology institute. The measured values are processed including uncertainty evaluations. The final part of this thesis focuses on comparison of measurement methods. The key comparison reference value and the degree of equivalence of the measurement of each method are determined. Next part of comparison consisted of graphic comparison of methods. The end of the thesis contains evaluation of the achieved results.

The combination of modern self-assembly techniques with well-established top-down processing methods pioneered in the electronics industry is paving the way for increasingly sophisticated devices in the future[1]. Nanomembranes, made from a variety of materials, can provide the necessary framework for a diverse range of device structures incorporating wrinkling, buckling, folding, and rolling of thin films[2, 3]. Over the past decade, an elegant symbiosis of bottom-up and top-down methods has been developed, allowing the fabrica- tion of hybrid layer systems via the controlled release and rearrangement of inherently strained layers [4]. Self-assembled rolled-up structures[4, 5] have become increasingly at- tractive in a number of fields including micro/nano uidics[6], optics[7](including metama- terial optical fibers[8]), Lab on a Chip applications[9], and micro- and nanoelectronics[10]. The use of such structures for microelectronic applications has been driven by the versatility in contacting geometries and the abundance of material combinations that these devices offer. By allowing devices to expand in the third dimension, certain obstacles that inhibit 2D structuring can be overcome in elegant ways. Similarly, recent progress in nanostructured superconducting electronic structures has been receiving increased attention[11]. The advancement of such devices has been mo- tivated by their use in quantum computation[12], high sensitivity radiation sensors[13], precision voltage standards[14] and superconducting spintronics[15] to name a few. Combining semiconductor with superconductor materials to create new hybrid geometries is advantageous because it adds the functionalities of the semiconductor, including high charge carrier mobilities, gating possibilities, and refined processing technologies. The main focus of the work presented in this thesis is the development of new methods for controlling strain behavior and its applications toward novel semiconduc- tor/superconductor heterostructures based on nanomembranes. More specifically, the goal is to integrate inherently strained semiconductor layer structures with superconducting materials to create innovative electronic devices by the controlled releasing and rearrangement of thin films. By rolling up pre-patterned semiconductor/superconductor layers, device geometries have been realized that are not feasible using any other technique. In this way, superconducting hybrid junctions, or Josephson junctions, have been created and their basic properties investigated. The Josephson effect, and junctions displaying this quantum coherent behavior, have found many essential uses in diverse areas of science and technology. Many research groups around the world are involved in finding new materials and fabrication methods to tune the properties and structure of such Josephson devices further[11]. The inclusion of semi- conductors, for example, allows for a greater control of the charge carrier density within the junction area, thus allowing for "transistor-like" behavior in these superconducting devices. By rolling up the superconductor contacts using a strained semiconductor as scaffolding, the fabrication of hybrid nano-junctions is simplified drastically, removing the need for complicated processing steps such as electron-beam or nano-imprint lithography. Furthermore, the technique allows many nanometer-sized devices to be created in parallel on a single chip which has the advantage that it can be scaled up to full-wafer processing. First, post-growth processing techniques of epitaxial layers are developed in order to extend the control of hybrid device fabrication. Here, three unique concepts for controlling the rolling behavior of strained semiconductor nanomembranes are presented. First an optical method for inhibiting the rolling of the strained layers is described. Next, a selective etching method for destroying the inherent strain within the semiconductor layer is introduced. Finally, a method by which the strain gradient across a trilayer stack is altered in situ during rolling is presented. Next, the fabrication of a hybrid nanomembrane-based superconducting device is presented. Various experimental details of the fabrication process are analyzed, and the electronic properties of the completed device are investigated. The devices created here highlight the fabrication process in which nanometer-sized structures are created using self-assembly techniques and standard microelectronics fabrication methods, presenting a new method to circumvent more complicated processing techniques. References [1] G. M. Whitesides and B. Grzybowski. Self-assembly at all scales. Science 295, 2418{2421 (2002). [2] Y. G. Sun, W. M. Choi, H. Q. Jiang, Y. G. Y. Huang and J. A. Rogers. Controlled buckling of semiconductor nanoribbons for stretchable electronics. Nature Nanotechnology 1, 201{207 (2006). [3] O. G. Schmidt and K. Eberl. Nanotechnology - Thin solid films roll up into nanotubes. Nature 410, 168 (2001). [4] O. G. Schmidt, C. Deneke, Y. Nakamura, R. Zapf-Gottwick, C. Mller and N. Y. Jin-Phillipp. Nanotechnology { Bottom-up meets top-down. Advanced Solid State Physics 42, 231 (2002). [5] V. Ya. Prinz, V. A. Seleznev, A. K. Gutakovsky, A. V. Chehovskiy, V. V. Preobrazhenskii, M. A. Putyato and T. A. Gavrilova. Free-standing and overgrown InGaAs/GaAs nanotubes, nanohelices and their arrays. Physica E 6, 828 (2000). [6] D. J. Thurmer, C. Deneke, Y. F. Mei and O. G. Schmidt. Process integration of microtubes for uidic applications. Applied Physics Letters 89, 223507 (2006). [7] R. Songmuang, A. Rastelli, S. Mendach and O. G. Schmidt. SiOx/Si radial superlattices and microtube optical ring resonators. Applied Physics Letters 90, 091905 (2007). [8] E. J. Smith, Z. W. Liu, Y. F. Mei and O. G. Schmidt. Combined surface plasmon and classical waveguiding through metamaterial fiber design. Nano Letters 10, 1{5 (2010). [9] G. S. Huang, Y. F. Mei, D. J. Thurmer, E. Coric and O. G. Schmidt. Rolled-up transparent microtubes as two-dimensionally confined culture scaffolds of individual yeast cells. Lab on a Chip 9, 263{268 (2009). [10] C. C. B. Bufon, J. D. C. Gonzalez, D. J. Thurmer, D. Grimm, M. Bauer and O. G. Schmidt. Self-assembled ultra-compact energy storage elements based on hybrid nanomembranes. Nano Letters 10, 2506{2510 (2010). [11] G. Katsaros, P. Spathis, M. Stoffel, F. Fournel, M. Mongillo, V. Bouchiat, F. Lefloch, A. Rastelli, O. G. Schmidt and S. De Franceschi. Hybrid superconductor-semiconductor devices made from self-assembled SiGe nanocrystals on silicon. Nature Nanotechnology 5, 458{464 (2010). [12] Y. J. Doh, J. A. van Dam, A. L. Roest, E. P. A. M. Bakkers, L. P. Kouwenhoven and S. De Franceschi. Tunable supercurrent through semiconductor nanowires. Science 309, 272{275 (2005). [13] F. Giazotto, T. T. Heikkila, G. P. Pepe, P. Helisto, A. Luukanen and J. P. Pekola. Ultrasensitive proximity Josephson sensor with kinetic inductance readout. Applied Physics Letters 92, 162507 (2008). [14] S. P. Benz. Superconductor-normal-superconductor junctions for programmable voltage standards. Applied Physics Letters 67, 2714{2716 (1995). [15] Y. C. Tao and J. G. Hu. Superconducting spintronics: Spin-polarized transport in superconducting junctions with ferromagnetic semiconducting contact. Journal of Applied Physics 107, 041101 (2010).