641 |
Measurement of the Production Cross-Section of Single Top Quarks in Association with W Bosons at ATLASGiorgi, Francesco Michelangelo 27 July 2017 (has links)
Das Ziel der vorgelegten Arbeit ist die Messung des Wirkungsquerschnittes der elektroschwach vermittelten Produktion einzelner Top Quarks in Assoziation mit einem W-Boson. Dieser Prozess wird auch abkürzend als Wt-Kanal bezeichnet. Die Vermessung dieses Produktionskanals stellt einen Test der Standardmodell-Vorhersage dar und bietet gleichzeitig die Möglichkeit durch einen Vergleich mit anderen Produktionskanälen für einzelne Top Quarks (t- und s-Kanal) Rückschlüsse auf neue Physik jenseits des Standardmodells zu ziehen. Nach einer allgemeinen Einführung zur Physik des Top Quarks folgt eine Beschreibung der für die Detektion und Rekonstruktion physikalischer Objekte wichtigen Systeme des ATLAS-Detektors.Anschlie{\ss}end wird die Analyse der Proton-Proton-Kollisions Daten die im Jahr 2011 vom ATLAS Detektor am Large Hadron Collider (LHC) augzeichnet wurden präsentiert.Diese Daten wurden bei einer Schwerpunktsenergie von 7 TeV aufgezeichnet und haben einen Umfang von 4.7 inverse femtobarn.Da die Produktionsrate des Wt-Kanals am LHC sehr klein im Vergleich zu seinem Hauptuntergrund ist, wurde ein Chi-Quadrat-basierter kinematischer Fit entwickelt um die Identifikation der Signalereignisse zu begünstigen. Hierbei werden W-Boson und Top-Quark aus den Endzustandsteilchen rekonstruiert und durch Bedingungen
hinsichtlich der W-Boson und Top Quark Masse evaluiert. Der errechnete Chi-Quadrat-Wert gibt die Wahrscheinlichkeit an, mit der das einzelne Ereignis mit der Signal-Hypothese übereinstimmt und kann als Schnittvariable verwendet werden um eine striktere Ereignisselektion zu erhalten. Die Messung ist von systematischen Unsicherheiten dominiert, die fast 100 % des gemessenen Wirkungsquerschnitts betragen. / The work reported in this thesis is aimed at measuring the cross section of electroweak single top quark production in association with a W boson, a process also referred to as Wt-channel. The interest in this production mechanism relies in the confirmation of the Standard Model predictions together with the possibility of identifying new physics phenomena when comparing its cross section with the one of the other single top production modes (the t- and s-channel.) After providing a general introduction on the physics of the top quark and a description of the experimental setup employed for the detection and the reconstruction of the physics objects, the analysis of 4.7 femtobarn of proton-proton collision data at a centre-of-mass energy of 7 TeV, recorded by the ATLAS detector at the Large Hadron Collider in the year 2011, is presentedSince the Wt channel production rate at the LHC is considerably smaller than its main background, a chi-squared based kinematic fit has been developed to help the identification of the signal events allowing the use of simultaneous mass constraints from the W boson and the top quark populating the final states. The chi-squared value in each event is then used as a parameter to rank the event in terms of its probability to match or not the signal hypothesis and a cut on its value is used to implement a first tight event selection. The final selection step consists of requiring that the system composed by the top quark and the W boson reconstructed by the fit is balanced in the transverse plane. The measurement is found to be dominated by the systematic uncertainties which affect it by an amount close to 100% of the cross section value.
|
642 |
Search for top quark-antiquark pair resonances with the ATLAS experimentWasicki, Christoph 18 March 2022 (has links)
Diese Dissertation beschreibt die Suche nach Resonanzen in der Erzeugung von Top-Quark-Antiquark-Paaren in Proton-Proton-Kollisionen bei einer Schwerpunktsenergie von 8 TeV. Die ausgewerteten Daten entsprechen einer integrierten Luminosität von 20.3 fb-1 und wurden mit dem ATLAS-Detektor am Large Hadron Collider aufgezeichnet. Die Analyse basiert auf Ereignissen mit genau einem geladenen Lepton, fehlendem Transversalimpuls und Teilchenjets im Endzustand. Mithilfe eines künstlichen neuronalen Netzes wird bei gleicher Signaleffizienz eine präzisere Identifikation von hochenergetischen, hadronisch zerfallenden Top-Quarks erzielt als mit bisher verwendeten Verfahren. Darauf aufbauend wird eine Ereignisselektion für die Erkennung von s-Kanal-Resonanzen mit Spin-1 optimiert. Eine verbesserte Abschätzung des erwarteten Untergrunds wird eingeführt, die den Einfluss der systematischen Unsicherheiten verringert. Die untersuchten Massenspektren der rekonstruierten Top-Quark-Paare weisen keine signifikante Abweichung von den Vorhersagen des Standardmodells auf. Im Vergleich zu schnittbasierten Suchstrategien lassen sich für Massen über 2 TeV etwa 30% bessere bayessche obere Ausschlussgrenzen auf den Wirkungsquerschnitt einer schmalen Resonanz eines leptophobischen Z'-Bosons in einem Technicolour-Modell sowie einer breiten Kaluza-Klein-Anregung des Gluons in einem Randall-Sundrum-Modell erzielen. Ausgehend von den beobachteten Ausschlussgrenzen auf den Wirkungsquerschnitt werden eine Z'-Resonanz bis zu einer Masse von 2.5 TeV und ein Randall-Sundrum Kaluza-Klein-Gluon bis zu einer Masse von 2.9 TeV ausgeschlossen. Dies stellt eine Verbesserung gegenüber bisherigen Suchen in vergleichbaren Datensätzen dar. / A search for new heavy particles that decay into top quark-antiquark pairs is presented using an integrated luminosity of 20.3 fb-1 of proton-proton collision data recorded at a centre-of-mass energy of 8 TeV with the ATLAS experiment at the Large Hadron Collider. The analysis considers events with exactly one charged lepton, missing transverse momentum and jets in the final state. An artificial neural network is utilized to identify hadronically decaying top quarks with high Lorentz boost more precisely than established methods at the same signal efficiency. Based on this, a novel method optimized for the detection of s-channel resonances with spin 1 is created. An enhanced estimation of the background expectations is introduced, which reduces the impact of the systematic uncertainties on the analysis. No significant deviation from the background predicted by the Standard Model of particle physics is observed in the invariant mass spectrum of the top-quark pair candidates. Bayesian upper cross-section limits on a narrow resonance from a leptophobic Z' boson in the framework of a technicolour model and a broad Kaluza-Klein excitation of the gluon in a Randall-Sundrum model are both found to be about 30% better at resonance masses of at least 2 TeV relative to a cut-based search strategy. Based on the observed cross-section limits, a topcolour-assisted technicolour Z' boson up to a mass of 2.5 TeV and a Randall-Sundrum Kaluza-Klein gluon up to a mass of 2.9 TeV are excluded. These are the most stringent exclusion limits on the resonance mass as compared to other searches based on similar data sets.
|
643 |
LHCb Upstream Tracker box : Thermal studies and conceptual designMårtensson, Oskar January 2016 (has links)
The LHC (Large Hadron Collider) will have a long shut down in the years of 2019 and 2020, referred to as LS2. During this stop the LHC injector complex will be upgraded to increase the luminosities, which will be the first step of the high luminosity LHC program (which will be realized during LS3 that takes place in 2024-2026). The LHCb experiment, whose main purpose is to study the CP-violation, will during this long stop be upgraded in order to withstand a higher radiation dose, and to be able to read out the detector at a rate of 40MHz,compared to 1MHz at present. This change will improve the trigger efficiency significantly. One of the LHCb sub-detectors the Trigger Tracker (TT), will be replaced by a new sub-detector called UT. This report presents the early stage design (preparation for mock-up building) of the box that will be isolating the new UT detector from the surroundings and to ensure optimal detector operation. Methods to fulfill requirements such as light and gas tightness, Faraday-cage behavior and condensation free temperatures, without breaking the fragile beryllium beam pipe, are established. / LHC (Large Hadron Collider) kommer under åren 2019-2020 att ha ett längre driftstopp. Under detta driftstopp så kommer LHC's injektionsanordningar att uppgraderas för att kunna sätta fler protoner i circulation i LHC, och därmed öka antalet partikelkollisioner per tidsenhet. Denna uppgradering kommer att vara första steget i "High Luminocity LHC"-programmet som kommer att realiseras år 2024-2026. LHCb-experimentet, vars främsta syfte är att studera CP-brott, kommer också att uppgraderas under stoppet 2019-2020. Framför allt så ska avläsningsfrekvensen ökas från dagens 1MHz till 40MHz, och experimentet ska förberedas för de högre strålningsdoser som kommer att bli aktuella efter stoppet 2024-2026. En av LHCb's deldetektorer, TT detektorn, kommer att bytas ut mot en ny deldetektor som kallas UT. Den här rapporten presenterar den förberedande designen av den låda som ska isolera UT från dess omgivning och försäkra optimala förhållanden för detektorn. Kraven på den isolerande lådan och tillvägagångssätt för att uppfylla dessa krav presenteras. / LHCb, LS2 and LS3 Upgrade
|
644 |
Mesure de la section efficace de production des hadrons lourds avec le spectromètre à muons d'ALICE au LHC / Heavy Flavour production with the ALICE muon spectrometerManceau, Loïc 01 October 2010 (has links)
Les calculs de chromodynamique quantique sur réseau prévoient, que pour un potentiel baryonique nul et une température de T ∼ 173 MeV , il devrait être possible d'observer une transition de la phase de la matière hadronique vers un plasma de quarks et de gluons. Les collisions d'ions lourds ultra-relativistes devraient permettre de mettre en évidence ce changement de phase. Les saveurs lourdes peuvent être utilisées pour sonder les premiers instants des collisions pendant lesquels la température est la plus élevée. Le LHC va permettre d'étudier les collisions entre noyaux de plomb et les collisions entre protons à une énergie jamais égalée : √s = 5.5 TeV (√sNN = 14 TeV ) pour le plomb (les protons). Le détecteur ALICE est dédié à l'étude des collisions d'ions lourds mais peut également mesurer les collisions entre protons. Il est équipé d'un spectromètre à muons conçu pour l'étude des saveurs lourdes. Cette thèse présente les performances du spectromètre pour la mesure de la section efficace de production inclusive des hadrons beaux (B) et charmés (D) dans les collisions proton-proton. La première étape de cette mesure consiste à extraire les distributions des muons de décroissance des hadrons B et D. L'étape suivante consiste à extrapoler les distributions aux sections efficaces de production inclusive des hadrons. Cette thèse contient également une étude préliminaire des performances du spectromètre pour la mesure du rapport de modification nucléaire et de l'observable associée nommée RB=D dans les collisions plomb-plomb de centralité0−10%. L'accent est porté sur les incertitudes et l'intervalle en impulsion transverse sur lequel ces observables pourront être mesurées. / Lattice quantum chromodynamics calculations predict a transition from the phase of hadronic matter to quark and gluon plasma for a temperature T ∼ 173 MeV and a vanishing baryonic potential. Ultra-relativistic heavy ion collisions allow to highlight this phase transition. Heavy flavours can be used to probe the first instants of the collisions where the temperature is the highest. The LHC will provide proton-proton and lead-lead collisions at unprecedented large energy (√s = 14 TeV and √sNN = 5.5 TeV respectively). The ALICE detector is dedicated to heavy ion collisions but it can also measure proton-proton collisions. The detector includes a muon spectrometer. The spectrometer has been disigned to measure heavy flavours. This PhD thesis presents the performance of the spectrometer to measure beauty hadrons (B) and charmed hadrons (D) inclusive production cross-section in proton-proton collisions. The first step of the measurement consists in extracting heavy hadron decayed muon distributions. The next step consists in extrapolating these distributions to heavy hadrons inclusive production cross-section. This PhD thesis also presents a preliminary study of the performance of the spectrometer for the measurement of the nuclear modification factor and the associated observable named RB=D in 0−10% central heavy ions collisions. Uncertainties and transverse impulsion range of extraction of the observables have been investigated.
|
645 |
Recherche de nouvelles résonances se désintégrant en paires de quarks top avec le détecteur ATLAS du LHC / Search of new resonances decaying into top quark pairs with the ATLAS detector at the LHC and jet calibration studiesCamacho Toro, Reina Coromoto 13 July 2012 (has links)
(...) Le travail de recherche exposé dans cette thèse a été réalisé en utilisant les données collectées par le détecteur ATLAS auprès du LHC. Le LHC est l'accélérateur de particules le plus grand et le plus puissant jamais construit. Il est constitué d'un double anneau de stockage de protons. Environ 10000 physiciens et ingénieurs du monde entier participent à cette expérience en développant de nouvelles techniques et approches pour identifier les événements intéressants cachés dans l'environnement complexe produit dans des collisions proton-proton. Les premières collisions proton-proton ont eu lieu à la fin de l'année 2009 à une énergie de 900~GeV dans le système du centre de masse. Le 19 Mars 2010, le LHC a battu un record en augmentant l'énergie des faisceaux à 3.5 TeV, et les premières collisions à 7 TeV ont été enregistrées le 30 Mars 2010. L'énergie par faisceau pour l'ensemble de 2011 était de 3.5 TeV, et 4 TeV en 2012. Un an d'arrêt technique est prévu en 2013 avant de parvenir à l'énergie nominale de collision de 14 TeV. Quatre expériences se partagent les quatre points de croisement des faisceaux du grand anneau du LHC. Une d'entre elles, ATLAS, est un détecteur généraliste avec un vaste programme de physique. ATLAS est constitué d'un détecteur interne de traces dans un champ magnétique de 2 T, offrant une couverture jusqu'à |η|<2.5, un système calorimétrique allant jusqu'à |η|<4.9, un spectromètre à muons dans un champ magnétique toroïdal et un système de déclenchement composé de trois niveaux. Tous les sous-systèmes ont d'excellentes performances en termes d'efficacité et de résolution. Cette thèse comprend trois travaux interconnectés. En premier lieu, elle décrit les résultats de la recherche de nouvelles résonances qui se désintègrent en paires tt en utilisant les premiers 2.05 fb-1 de données collectées par le détecteur ATLAS en 2011. Dans une deuxième partie, en connection avec cette recherche, des études de performance de Jet Vertex Fraction (JVF) en utilisant des événements tt sont également présentées. JVF est une variable qui peut être utilisée pour réduire les effets d'empilement afin d'améliorer la précision et la sensibilité des analyses de physique à haute luminosité. Finalement, les performances de la calibration Globale Séquentielle des jets, sa validation sur des données réelles et l'évaluation de l'incertitude systématique qui lui est associée seront aussi discutées. La détermination précise de l'échelle en énergie des jets (JES: acronyme de Jet Energy Scale) ainsi que l'obtention d'une résolution optimale sont extrêmement importantes pour de nombreuses analyses de physique au LHC. Cela est vrai en particulier pour la recherche de nouvelles résonances tt en raison de la présence de jets dans l'état final. Les résultats sont présentés dans l'ordre dans lequel ils ont été réalisés au cours de cette thèse. (...) / (...) The studies presented in this thesis were performed using data collected by the ATLAS detector at the LHC. The LHC is the largest and highest energy particle accelerator ever built. Around 10000 physicists and engineers around the world are taking part in this experience by developing new techniques and approaches to identify the interesting physics buried in the complex environment produced in the LHC pp collisions. The LHC produced its first pp collisions on November 23, 2009 at the injection energy of 450 GeV. On March 19, 2010 the LHC broke a record by raising the beam energy to 3.5 TeV, and the first pp collisions at 7 TeV were recorded on March 30, 2010. The beam energy for the whole 2011 year was 3.5 TeV per beam, while in 2012 the beam energy is 4 TeV. At the beginning of 2013 the LHC will go into a long shutdown to prepare for higher energy collisions starting in 2014. At the four collision points of the LHC, detectors have been placed to study the high-energy collisions. One of these detectors, ATLAS, a general purpose detector with an extensive initial physics program. The ATLAS detector consists of a tracking system in a 2 T solenoid field, providing coverage up to a pseudo-rapidity of |η|<2.5, sampling electromagnetic and hadronic calorimeters up to |η|<4.9, muon chambers in a toroidal magnetic field and a trigger system consisting of three levels of event selection. So far, the ATLAS sub-detectors have shown an excellent performance in terms of efficiency and resolution. This thesis contains three different analyses interconnected. The main one concerns the results of the search for new resonances that decay to top-quark pairs using the first 2.05 fb-1 of data collected by the ATLAS detector in 2011. Secondly and related to this search, performance studies of the Jet Vertex Fraction (JVF) in top-quark pairs topologies are presented too. JVF is a variable that can be used to reduce the pile-up effects to improve the precision and sensitivity of physics analyses at high luminosities. Finally, results regarding the performance, validation in data and associated systematic uncertainty derivation of the Global Sequential (GS) jet calibration are discussed. The determination of the jet energy scale and the achievement of the optimal jet performance is of key importance to many LHC physics analyses, specially to the main analysis of this thesis due to the presence of jets in the final state. The results are presented in order that they were performed during the thesis.
|
646 |
Recherche de sgluons dans des états finals multitops avec le détecteur ATLAS auprès du LHC à √s = 8 TeV / Search for sgluons in multitop final states with the Atlas detector at the LHC at √s = 8 TeVValéry, Loïc 30 June 2014 (has links)
En dépit de nombreuses confirmations expérimentales, le Modèle Standard, théorie décrivant les particules élémentaires et trois des interactions fondamentales souffre de difficultés théoriques et expérimentales. Ces dernières motivent l’existence d’une physique non décrite jusqu’alors : la Nouvelle Physique. Ce travail se focalise sur la recherche de gluons scalaires, appelés communément sgluons, nouvelles particules prédites dans plusieurs théories de Nouvelle Physique. Une étude phénoménologique considère les différents états finals (de un à quatre quarks top) et signatures (un ou deux leptons chargés) qui peuvent être engendrés par l’existence de sgluons. La sensibilité d’une expérience comme Atlas à ce signal est estimée et montre que l’un des états finals les plus prometteurs est celui contenant quatre quarks top, dans la signature à deux leptons porteurs de la même charge électrique (électron ou muon). La recherche de sgluons dans l’expérience Atlas s’appuie sur les états finals à quatre quarks top dans une signature à deux leptons porteurs de la même charge électrique, des jets étiquetés b et de l’énergie transverse manquante. Elle représente la première recherche mondiale de sgluons dans cet état final. Les principaux enjeux de l’analyse (estimation des bruits de fond, optimisation de la sélection, interprétation statistique) sont détaillés. La comparaison avec les données enregistrées pendant la première partie de l’année 2012 (L = 14:3 fb..1) ne montre pas d’excès significatif. La limite inférieure sur la masse du sgluon est alors de 0.80+0:02..0:03 TeV. L’extension de cette analyse avec le lot complet de données enregistrées en 2012 par Atlas est également présentée dans ce document et permet une sensibilité accrue jusqu’à des masses de sgluons de 0:94 0:03 TeV. Ce document présente également les analyses et résultats relatifs à des études de performances. La première s’attache au système de hautes tensions du calorimètre hadronique à tuiles du détecteur Atlas (TileCal). Elle conclut notamment, au regard des critères établis, que seuls 7 canaux de hautes tensions du TileCal (sur un total de 9852) ont un comportement problématique. La deuxième étude est liée à la réjection de l’effet d’empilement au moyen d’une sélection sur la variable JVF (Jet Vertex Fraction). L’efficacité de cette sélection, calculée dans les données et dans la simulation montre des différences, nécessitant l’apport d’une correction à la simulation. La détermination de facteurs correctifs et de leurs incertitudes systématiques associées est présentée dans ce document. / Despite its experimental confirmations, the Standard Model, which describes both the elementary particles and three of the fundamental interactions, has some theoretical and experimental limitations. As a consequence of these limitations, a Physics not described in the context of the Standard Model could exist : the New Physics. This work focuses on the search for scalar gluons, commonly dubbed sgluons, predicted in various New Physics theories. A phenomenological study considers various final states (containing between two and four top quarks) and signatures (with one or two charged leptons) that could arise from sgluon production. The sensitivity of an Atlas-like experiment to this signal is estimated and the results indicate that one of the most promising final states contains four top quarks in a signature with two charged leptons (electron or muon) of the same electric charge. The search for sgluons within the Atlas experiment uses the previous results. Thus, it only investigates the 4-top topology in a signature containing two same-sign charged leptons, b-jets and missing transverse energy. It represents the first search ever for sgluons in this final state. The main steps of the analysis (background estimation, selection optimisation and statistical interpretation) are detailed. The comparison with the data recorded in the first months of 2012 (L = 14:3 fb..1) shows no significant excess and is interpreted in terms of a limit on the sgluon mass. The latter is found to be 0.80+0:02..0:03 TeV. The extension of this analysis to the full 2012 Atlas dataset is also presented in this document and shows an increased expected sensitivity to sgluon masses up to 0:94 0:03 TeV. Finally, this document also presents the analyses and results of performance studies. The first one is related to the high voltage system of the Atlas Tile Calorimeter (TileCal). The main conclusion is that only 7 channels out of the 9852 TileCal ones are fond to be problematic. The second study focuses on the rejection of the pile-up effect by the means of a selection applied on the so-called JVF (Jet Vertex Fraction) variable. The efficiency of this selection is computed both in data and simulation and shows some differences that have to be corrected in the simulation. The derivation of the correction factors and their associated systematic uncertainties is detailed in this document.
|
647 |
Études de la violation de CP dans les désintégrations B0 -> DK*0 et des performances du système de déclenchement hadronique avec le détecteur LHCb au CERN / CP violation studies on the B0 -> DK*0 decays and hadronic trigger performance with the LHCb detector at CERNMartin Sanchez, Alexandra 25 June 2013 (has links)
Dans le Modèle Standard de la physique des particules, le mécanisme Cabibbo-Kobayashi-Maskawa (CKM) décrit le phénomène du mélange des quarks. De ses paramètres, l'angle gamma est celui connu avec la moins grande précision. Les mesures directes donnent une incertitude d'environ 15º, importante comparée à celle sur la valeur extraite des ajustements globaux, de 3º. Pour vérifier la cohérence du Modèle Standard, gamma doit être mesuré précisément. Cela est possible en utilisant des processus au niveau des arbres, où seules des contributions du Modèle Standard sont attendues, ou avec des processus impliquant des boucles, qui peuvent être sensibles à des effets au-delà. Des différences entre la mesure de gamma avec des diagrammes en arbres et avec des boucles pourraient être donc une indication de nouvelle physique. Cette thèse présente la première mesure des observables CP dans la désintégration B0 -> DK*0. Celle-ci est sensible à gamma du fait de l'interférence entre l'amplitude des diagrammes b -> u et b -> c, au niveau des arbres. L'asymétrie CP dans le mode B0 -> D(K+K-)K*0 et le rapport des largeurs partielles avec B0 -> D(K+pi-)K*0 sont mesurés avec 1 /fb de données récoltées par l'expérience LHCb en 2011,A_KK_d = -0,452 +/- 0,230 +/- 0,025 = A_CP+,R_KK_d = 1,360 +/- 0,366 +/- 0,075 = R_CP+. L'asymétrie CP du mode supprimé B0 -> D(K-pi+)K*0 et le rapport des largeurs partielles avec le favorisé B0 -> D(K+pi-)K*0 sont mesurés avec 3 /fb de données récoltées en 2011 et 2012,A_sup_d = -0,094 +/- 0,318 = A_ADS,R_d = 0,075 +/- 0,023 = R_ADS. Les études réalisées sur le système de déclenchement hadronique de l'expérience LHCb sont aussi présentées. / In the Standard Model of particle physics, the Cabibbo-Kobayashi-Maskawa (CKM) mechanism describes the quark mixing effect. The CKM gamma angle is one of the parameters of the Standard Model that are known less accurately. Direct measurements give an uncertainty of around 15º, large with respect to the uncertainty on the value extracted from global fits, of 3º. In order to test the Standard Model consistency, the gamma angle needs to be measured precisely. This can be done using processes at the tree-level, where only Standard Model contributions are expected, or using processes involving loop diagrams, which can be sensitive to physics beyond the Standard Model. Differences in the gamma measurement from tree and loop diagrams would be an indication of new physics. This thesis presents the first measurement of the CP observables in the B0 -> DK*0 decay. Sensitivity to gamma arises from the interference of the b -> u mediated amplitude with the b -> c one, at the tree-level. The CP asymmetry of the B0 -> D(K+K-)K*0 mode and the partial width ratio of this channel with respect to B0 -> D(K+pi-)K*0 are measured using 1 /fb of data collected by the LHCb experiment in 2011,A_KK_d = -0.452 +/- 0.230 +/- 0.025 = A_CP+,R_KK_d = 1.360 +/- 0.366 +/- 0.075 = R_CP+. The CP asymmetry of the suppressed B0 -> D(K-pi+)K*0 mode and the partial width ratio with respect to the favoured B0 -> D(K+pi-)K*0 are measured using the total 3 /fb of data collected in 2011 and 2012,A_sup_d = -0.094 +/- 0.318 = A_ADS,R_d = 0.075 +/- 0.023 = R_ADS. In addition, the studies performed on the hardware hadronic trigger of the LHCb experiment are also presented.
|
648 |
Study of analytical methods for electron track detection from heavy quark decays generated by sqrt(s)=8TeV pp collisions at ALICE / Estudo de métodos analíticos para detecção de traços de elétrons oriundos do decaimento de quarks pesados por colisões pp a raiz(s)=8TeV no ALICELuzio, Marco Aurelio 03 May 2017 (has links)
A study of the usage of ALICEs time of flight (TOF), time projection chamber (TPC), and electromagnetic calorimeter (EMCal), aiming at detecting and separating electrons and positrons (e±) originated from different sources, was carried out. To accomplish the objectives of the research, data gathered from the 2012 proton-proton (pp) collision experiment were used. At a center of mass energy of sqrt(s)=8TeV, the collision of the proton beams liberates heavy quarks, charm and bottom, with approximate lifetimes of approximately 10^13s and 10^12s, respectively. The e± generated through weak semileptonic heavy flavor decays are of interest for studying quarks, therefore it served solely as motivation and incentive for the research carried out and described herein. The introduction of carefully selected cuts, with the purpose of separating partial data collected in the three detectors, permitted the understanding of their effect on the results. Furthermore, due to the fact that the TOFs design was not meant to separate e± from the other heavier particles, only the general effects of introducing a simple cut in the beta=v/c values were analyzed. The more specific cuts were only used for the data generated by the events detected by the TPC and the EMCal. A combination of cuts based on the particles energy loss as a function of traveled distance (dE/dx), with the ratio of energy to momentum (E/p) of the particle, was adopted to enable the separation process, thus allowing for the isolation of e± from the other particles, namely pi±, K±, and p/p. The analysis was performed for values of total particle momentum in the range 0<=p<=6GeV/c. A comparison of the raw data with the results obtained by applying this procedure, indicated a substantial increase in the e± yield and efficiency, reaching average values above 90% over the entire momentum range. / Um estudo do uso dos detetores de tempo de voo (TDV), câmara de projeção de tempo (CPT), e calorímetro eletromagnético (CalEM) do ALICE, visando detectar elétrons e pósitrons (e±) originados por diferentes fontes, foi realizado. Para atingir os objetivos da pesquisa, dados coletados durante o experimento de colisões próton-próton em 2012 foram utilizados. Com um nível de enegia do centro de mass igual a raiz(s)=8TeV, a colisão dos feixes de prótons libera quarks pesados, charm e bottom, com tempo de vida de aproximadamente 10^13s e 10^12s, respectivamente. Os e± gerados pelo decaimento fraco semileptônico de sabores pesados é de interesse para o estudo dos quarks, portanto, o conceito serviu somente como motivação e incentivo para a pesquisa realizada e descrita nesta dissertação. A introdução de cortes específicos, com a finalidade de parcialmente separar dados coletados nos três detectores, permitiu adquirir entendimento sobre os efeitos do cortes nos resultados. Adicionalmente, em virtude do projeto do TDV não ter sido feito visando separar e± oriundos do decaimento dos sabores pesados das demais partículas mais massivas, somente os efeitos gerais de introduzir um corte simples nos valores de beta=v/c, foram analisados. Os cortes mais específicos foram somente nos dados detectados pelo CPT e pelo CalEM. Uma combinação de cortes baseados na perda de energia da partícula em função da distância percorrida (dE/dx), com a razão entre a energia e o momento da partícula (E/p), foi adotada para viabilizar o processo de separação, desta forma permitindo a separação dos e± das demais partículas, ou seja, dos pi±, K±, and p/p. A análise foi realizada para valores de momento total das partículas na faixa 0<=p<=6GeV/c. Uma comparação dos dados originais com os resultados obtidos pela aplicação do procedimento, indicou um aumento substancial do rendimento e eficiência dos e±, atingindo valores médios acima de 90% na faixa inteira de momento.
|
649 |
Etude de la production des mésons charmés-étranges dans les collisions proton-proton et proton-plomb avec l'expérience ALICE au LHC / Production of charm-strange mesons in proton-proton and proton-lead collisions with the ALICE experiment at LHCHamon, Julien 21 September 2018 (has links)
L'étude de la production des quarks charmés dans les collisions de hautes énergies de noyaux atomiques offre une approche inédite pour l'étude du plasma de quarks et de gluons. La compréhension et la caractérisation de cet état de la matière déconfinée, de prime abord retrouvé dans les systèmes les plus lourds, nécessitent une connaissance fine des systèmes les plus légers, telles que les collisions proton-proton (pp) et proton-plomb (p-Pb). Dans ce manuscrit, nous présentons la mesure de la production des mésons charmés-étranges Ds+, à rapidité centrale, avec les données du run 2 du LHC, recueillies en 2016 par l'expérience ALICE. Deux systèmes sont étudiés : les collisions pp à √s=13 TeV et p-Pb à √sNN=5,02 TeV. La section efficace de production des Ds+, leur abondance relative et leur facteur de modification nucléaire sont mesurés puis comparés à d'autres mesures et à diverses prédictions théoriques. Le résultat p-Pb établit une nouvelle référence pour l'étude des collisions Pb-Pb. / The study of the production of charm quarks in high-energy atomic-nucleus collisions offers an genuine approach for the study of the quark-gluon plasma. The understanding and characterisation of this state of deconfined-matter, at first sight created in heaviest systems, require a fine knowledge of lightest systems, such as proton-proton (pp) and proton-lead (p-Pb) collisions. In this manuscript, we present the measurement of the charm-strange mesons Ds+ production, at central rapidity, with the LHC run 2 data, collected in 2016 with the ALICE experiment. Two systems are studied: pp collisions at √s=13 TeV and p-Pb collisions at √sNN=5.02 TeV. The production cross-section of Ds+, their relative abundance and their nuclear modification factor are measured then compared to other measurements and to various theoretical predictions. The p-Pb result establishes a new reference for the study of Pb-Pb collisions.
|
650 |
Observation des photons directs dans les premières données et préparation à la recherche du boson de Higgs dans l'expérience CMS au LHC (CERN) / Observation of direct photons in first data and preparation for the Higgs boson searches in the CMS experiment at LHC (CERN)Chanon, Nicolas 06 October 2010 (has links)
Le LHC (Large Hadron Collider) fournit aux expériences du CERN (Laboratoire Européen pour la Physique des Particules) des collisions proton-proton avec une énergie de 7 TeV dans le centre de masse depuis fin Mars 2010. Le LHC a en particulier été conçu pour permettre la recherche du boson de Higgs, particule prédite par le modèle standard encore jamais observée à ce jour, dans toute la gamme de masse où il est attendu. Ce travail de thèse est une contribution à la recherche du boson de Higgs dans CMS (Compact Muon Solenoid), l'un des quatre grands détecteurs placés auprès du LHC, et développe plusieurs outils qui permettent la mesure des bruits de fonds et l'amélioration du potentiel de découverte. Un nouvel outil de récupération des photons émis par les leptons dans l'état final de la désintégration H --> ZZ(*) ->4≪(≪=e mu) a été développé dans cette thèse. Cette méthode permet la récupération d'un nombre variable de photons par événements, donne une meilleure performance que la méthode précédemment utilisée dans CMS et permet l'amélioration de la résolution sur la masse des bosons Z0 et du boson de Higgs, ainsi qu'un gain de 5% sur la significance d'une observation du boson de Higgs dans ce canal. La deuxième partie de cette thèse traite de l'étude des bruits de fond et de la recherche d'un boson de Higgs léger (110 < mH < 140 GeV) dans le canal H --> γγ. Un nouvel outil de discrimination γ/πi0 à l'aide d'un réseau de neurone a été mis au point pour le rejet des photons provenant de la désintégration des π0 produits copieusement dans les jets de QCD. Les performances du réseau de neurone sont examinées dans le détail. Le réseau de neurone est alors utilisé comme variable "template" permettant la mesure du processus γ+X à partir des données avec 10 nb−1 de luminosité intégrée dans CMS. La mesure du processus γγ+X est aussi préparée à partir de la simulation dans l'hypothèse d'une luminosité intégrée de 10 pb−1. La prise en compte des effets cinématiques aux ordres supérieurs, nécessaire pour la prédiction la plus précise possible du signal H -> γγ et du bruit de fond, est effectuée dans cette thèse par la méthode de repondération, pour le gg -> H γγ processus au NNLO et pour la première fois pour le processus γγ +X au NLO, dans les deux cas à l'aide de distributions doublement différentielles. Les outils de repondération et de discrimination γ/π0 sont ensuite intégrés dans l'analyse pour améliorer la sensibilité de CMS à la recherche du boson de Higgs dans le canal H->γγ dans le modèle standard et au-delà, grâce à une paramétrisation effective développée par des phénoménologues avec lesquels nous avons travaillé. / The LHC (Large Hadron Collider) provides proton-proton collisions to CERN (European Organization for Nuclear Research) experiments at a 7 TeV center of mass energy since March 2010. The LHC has been designed in particular to allow the Higgs boson searches, particle predicted in the standard model but still not discovered until today, in the whole mass range where it is expected. This thesis is a contribution to the Higgs boson searches in CMS (Compact Muon Solenoid), one of the four big detectors at LHC. The thesis develops several tools which allow to measure the backgrounds and to improve the discovery potential. A new tool for recovery of photons emitted by leptons in the final state H --> ZZ(*) ->4≪(≪=eμ) has been developed in this thesis. This method recovers a variable number of photons per event, performs better than the method previously used in CMS and improves Z^0 and Higgs bosons mass resolution. A 5% gain on the significance to observe a Higgs boson in this channel is reached. The second part of this thesis deals with studies of the backgrounds and the searches for a light Higgs boson (110 < mH < 140 GeV) in the channel H --> γγ. A new tool for γ/πi0 discrimination with a neural network has been developed to reject photons coming from π0 decays, copiously produced in QCD jets. The neural network performance is examined in details. The neural network is then used as "template" variable to measure γ+X process in data with 10 nb−1 of integrated luminosity. The measurement of γγ+X process is also prepared with simulation in the luminosity hypothesis of 10 pb−1. Taking into account higher order kinematic effects is necessary to perform the best prediction of H -> γγ signal and backgrounds. In the thesis this is carried out with a reweighting method, at NNLO for gg -> H γγ process and for the first time at NLO for γγ +X process, in both cases with doubly differential distributions. Reweighting procedure and γ/πi0 neural network are then integrated in the H -> γγ analysis to improve CMS sensitivity in the standard model and beyond, thanks to an effective parameterization developed by phenomenologists we were working with
|
Page generated in 0.0242 seconds