281 |
Systém pro měření tepelné účinnosti solárních absorbérů / System for measuring of thermal efficiency of solar absorbersŘiháček, Jan January 2013 (has links)
The thesis deals with the measurement system for determining the thermal efficiency of the newly developed types of solar absorbers. Measuring equipment allows simultaneous indoor or outdoor thermal efficiency detection of up to four samples absorbers. Emphasis is placed on the flow and heat transfer medium temperature changes. For this purpose is used Biotech FCH-m-POM-LC and LM35DZ sensors. Sensor signal is transferred to a PC using the measuring module NI USB-6221. Here it is further processed by proposed evaluation program. The software is implemented in LabVIEW integrated development environment. In a final part are performed a verification measurements to assess system performance and evaluate the thermal efficiency of various types of solar absorbers. This path is also demonstrated high efficiency applications absorbent layer coating color RABSORB 5.
|
282 |
Návrh a realizace testovacího zařízení manipulačního mechanismu vzorku pro elektronový mikroskop / Design and implementation of testing device for specimen mechanism for electron microscopeTrnkócy, Tomáš January 2013 (has links)
Práce se zabývá návrhem a implementací testovacího zařízení pro manipulačnínmechanismus vzorku v elektronovém mikroskopu. Testovací zařízení a jeho software zajištuje meření několika parametrů mechanismu, jejich statistické vyhodnocení a porovnání se specifikací. Cílem je vytvořit komplexní testovací zařízení s jednoduchým uživatelským rozhraním, s požadavkem náhrady stávajícího nemodulárního a nestabilního řešení a jeho rozšíření o testování dalších parametrů.
|
283 |
Návrh zařízení pro měření smáčivosti povrchů / Design equipment for measurement the surface wettabilityŠubrt, Kamil January 2013 (has links)
This paper describes the design of equipment for measuring the wettability of surfaces. Surface wettability is determined by analyzing the profile drops, in an image taken with a digital camera. After the equipment is required to automatically find and focus the analyzed drops, taking the image, measuring wettability and save the image analysis, including measurement results to a file for subsequent offline analysis and archiving. The proposed facility is designed as a three-axis manipulator. For the driving the axes are chosen stepper motors. A key factor in achieving the highest possible speed measurement is very smooth movement of the manipulator, which is achieved by controlling of motors in microstepping mode with very high resolution. Software entire system is designed in the NI LabVIEW development environment for image processing was used module NI Vision.
|
284 |
Návrh software jednoúčelového stroje pro výrobní testy / Design of software single purpose machine for manufacturing testJanoušek, Roman January 2015 (has links)
This diploma thesis deals with design and implementation of software for control of manufacturing tests of pneumatic proportional valve Festo MPYE. The single-purpose testing device consists of a DAQ device, a pressure sensor and of electrically operated pneumatic valves. In the introduction of this thesis are outlined aims of thesis followed by introduction to single-purpose assemblies commonly used in practice. The main part of this thesis deals with analysis and with solving the issues of assigned product testing. The designed and implemented modular software for control of manufacturing tests of assigned product is presented as an outcome and this software is easily adjustable for tests of a different product. In the conclusion are assessed achieved aims.
|
285 |
Mechatronický přístup v dynamice vozidel / Mechatronic Approach to Vehicle DynamicsKučera, Pavel January 2015 (has links)
This theses deals with mechatronic approach to a vehicle dynamics. It is divided into two main parts. There are prepared vibration analysis, measurement and analysis of functions of truck powertrain in the first part. The second part describes the creation of computational models allowing to simulate driving conditions, vibrations of the vehicle and its extension for the development of mechatronic systems. There are shown different driving modes to control created algorithm of mechatronic system. The main tool for the development of mechatronic systems is the created simulator of vehicle enabling testing of computational models in real time.
|
286 |
Selftest pro automatický průmyslový tester / Self-Test for Automatic Industrial TesterKyselý, Tomáš January 2017 (has links)
Work discusses about the test station in NXP Semiconductors Company in Rožnov pod Radhoštěm. It describes first the test station itself and its possibilities in software libraries testing. Second it describes automatic selftest of this station and sub-steps of this selftest. This work is also used as a documentation for company needs. KEYWORDS
|
287 |
Vývoj laboratorního modelu pro testování sezonního topného faktoru / Development of a laboratory test model for seasonal heating factor evaluationFiala, Tomáš January 2017 (has links)
This master’s thesis deals with automation of Seasonal Coefficient of Performance (SCOP) testing process of heat pumps. The thesis includes explanation of testing procedure according to EN 14 825 and flowcharts of its logic. Next there is description of laboratory test model made in LabView and its functionality verifying.
|
288 |
LOW COST DATA ACQUISITION FOR AUTONOMOUS VEHICLEDong Hun Lee (9040400) 29 June 2020 (has links)
The study of this research has a challenge of learning data gathering sensor programming and design of electronic sensor circuit. The cost of autonomous vehicle development is expensive compared to purchasing an economy vehicle such as the Hyundai Elantra. Keeping the development cost down is critical to maintaining a competitive edge on vehicle pricing with newer technologies. Autonomous vehicle sensor integration was designed and then tested for the driving vision data-gathering system that requires the system to gather driving vision data utilizing area scan sensors, Lidar, ultrasonic sensor, and camera on real road scenarios. The project utilized sensors such as cheap cost LIDAR, which is that drone is used for on the road testing; other sensors include myRIO (myRIO Hardware), LabVIEW (LabVIEW software), LIDAR-Lite v3 (Garmin, 2019), Ultrasonic sensor, and Wantai stepper motor (Polifka, 2020). This research helps to reduce the price of usage of autonomous vehicle driving systems in the city. Due to resolution and Lidar detecting distance, the test environment is limited to within city areas. Lidar is the most expensive equipment on autonomous vehicle driving data gathering systems. This study focuses on replacing expensive Lidar, ultrasonic sensor, and camera to drone scale low-cost Lidar to real size vehicle. With this study, economic expense autonomous vehicle driving data acquisition is possible. Lowering the price of autonomous vehicle driving data acquisition increases involving new companies on the autonomous vehicle market. Multiple testing with multiple cars is possible. Since multiple testing at the same time is possible, collecting time reduces.
|
289 |
Problematika rychlé automatické výměny nástrojů u obráběcích strojů / Problematic of Fast Automatic Tool Change by Working MachineryPavlík, Jan January 2011 (has links)
This dissertation thesis is focused on the problem of the Automatic Tool Change for milling centers, which is recently shown as a very current topic. The content of this work is to conduct a comprehensive research of various types of ATC depending on the type of machine, as well as research of the current tool interface relating closely with these problems. There was made a comprehensive analysis on the basis of data obtained by comprehensive research, from which both the main factors affecting this topic and the area dealed and developed by this work resulted. The most problematic area of machinery used nowdays for the Atomatic Tool Change was detected as manipulator provided the exchange between spindle and tool storage. Kinematic structure and design of individual elements affects very significantly the dynamics of the whole process of exchange of tools. Therefore, the work is focused on problematic of the manipulator. The main results of this thesis are constructional design of several types of manipulators, which were partly realized within the project 1.2.4 of Brno department of RCMT in the form of the testing stands. There was developed simulation models for selected types of manipulators which were verificated by measuring on the real stand. On the basis of abovementioned problem there was identified another key issue related not only to the exchange process but also with complex problem of service life of spindle. It is a grab force in the process of picking tools. The work outlines the possibilities for further research of these forces on the service file of spindle (especially on service life of bering groups of spindle).
|
290 |
Utformning av Bränslecellsystem för Autonom Undervattensfarkost / Design of a Fuel Cell System for an Autonomous Underwater VehicleGlenngård, Anton, Helmersson, Sofia, Kessler, Amanda, Nilsson, Elisabeth January 2016 (has links)
Avdelningen Marina System på Kungliga Tekniska Högskolan har designat och konstruerat en autonom undervattensfarkost (AUV). I dagsläget drivs farkosten drivs av ett litiumpolymerbatteri. Ett bränslecellssystem bestående utav PEM-bränslecellsstackar (Polymerelektrolytbränslecell), metallhydrid och trycksatt syrgas har designats för att byta ut det befintliga litiumpolymerbatteriet. För att få ett säkert system är det utrustat med vätgassensor, trycksensor, voltmätare samt temperatursensor. Eftersom både syrgas och vätgas måste medföras i farkosten, jämfört med landgående fordon som kan utnyttja syret från omgivande atmosfär, har olika bränslelagringsmetoder undersökts. För att lagra syrgas har trycksatt gas valts, denna lagras i en tank gjord av kolfiber och ett har ett tryck på 300 bar. Vätgasen väljs att lagras i en FeTi-metallhydrid på grund av dess volymmässiga fördel. Metallhydrid är en volymeffektiv men viktineffektiv lagringsmetod, vilket gör att den är perfekt till en undervattensfarkost. Metallhydriden förvaras i en tank gjord av aluminium. Eftersom bränslecellerna producerar vatten har olika sätt att fånga upp detta undersökts. Regenerad cellulosa (disktrasa) har hög absorptionsförmåga och har därför valts för systemet. De bränslecellesstackar som införskaffades har testats med hjälp av programvaran Labview. De presterade något under vad tillverkaren hävdade, något som antas bero på effektbehov hos kontroller och fläktar. Olika driftbetingelser har undersökts för att kunna använda bränslecellsstackarnas fulla potential. Det slutgiltiga systemet får ej plats i farkosten. En teoretisk studie för när bränsleceller blir mer volymeffektiva än batterier visar att för ett helt optimerat system går gränsen vid 3 liter, vilket motsvarar att 822 normalliter vätgas måste tas med. I framtiden skulle en kemisk lagringsmetod av syrgas vara att föredra, exempelvis väteperoxid. Metallhydrid är ett bra sätt att lagra vätgas men tankmaterialet skulle kunna vara exempelvis rostfritt stål istället för aluminium så att tanken blir mer volymeffektiv på grund av den högre brottgränsen hos stålet. Ett syrgasflöde till bränslecellen istället för ut i farkostens atmosfär skulle kunna öka verkningsgraden och därmed räckvidden.
|
Page generated in 0.0147 seconds