No description available.

No description available.

Résumé : La texture dispose d’un bon potentiel discriminant qui complète celui des paramètres radiométriques dans le processus de classification d’image. L’indice Compact Texture Unit (CTU) multibande, récemment mis au point par Safia et He (2014), permet d’extraire la texture sur plusieurs bandes à la fois, donc de tirer parti d’un surcroît d’informations ignorées jusqu’ici dans les analyses texturales traditionnelles : l’interdépendance entre les bandes. Toutefois, ce nouvel outil n’a pas encore été testé sur des images multisources, usage qui peut se révéler d’un grand intérêt quand on considère par exemple toute la richesse texturale que le radar peut apporter en supplément à l’optique, par combinaison de données. Cette étude permet donc de compléter la validation initiée par Safia (2014) en appliquant le CTU sur un couple d’images optique-radar. L’analyse texturale de ce jeu de données a permis de générer une image en « texture couleur ». Ces bandes texturales créées sont à nouveau combinées avec les bandes initiales de l’optique, avant d’être intégrées dans un processus de classification de l’occupation du sol sous eCognition. Le même procédé de classification (mais sans CTU) est appliqué respectivement sur : la donnée Optique, puis le Radar, et enfin la combinaison Optique-Radar. Par ailleurs le CTU généré sur l’Optique uniquement (monosource) est comparé à celui dérivant du couple Optique-Radar (multisources). L’analyse du pouvoir séparateur de ces différentes bandes à partir d’histogrammes, ainsi que l’outil matrice de confusion, permet de confronter la performance de ces différents cas de figure et paramètres utilisés. Ces éléments de comparaison présentent le CTU, et notamment le CTU multisources, comme le critère le plus discriminant ; sa présence rajoute de la variabilité dans l’image permettant ainsi une segmentation plus nette, une classification à la fois plus détaillée et plus performante. En effet, la précision passe de 0.5 avec l’image Optique à 0.74 pour l’image CTU, alors que la confusion diminue en passant de 0.30 (dans l’Optique) à 0.02 (dans le CTU). / Abstract : Texture has a good discriminating power which complements the radiometric parameters in the image classification process. The index Compact Texture Unit multiband, recently developed by Safia and He (2014), allows to extract texture from several bands at a time, so taking advantage of extra information not previously considered in the traditional textural analysis: the interdependence between bands. However, this new tool has not yet been tested on multi-source images, use that could be an interesting added-value considering, for example, all the textural richness the radar can provide in addition to optics, by combining data. This study allows to complete validation initiated by Safia (2014), by applying the CTU on an optics-radar dataset. The textural analysis of this multisource data allowed to produce a "color texture" image. These newly created textural bands are again combined with the initial optical bands before their use in a classification process of land cover in eCognition. The same classification process (but without CTU) was applied respectively to: Optics data, then Radar, finally on the Optics-Radar combination. Otherwise, the CTU generated on the optics separately (monosource) was compared to CTU arising from Optical-Radar couple (multisource). The analysis of the separating power of these different bands (radiometric and textural) with histograms, and the confusion matrix tool allows to compare the performance of these different scenarios and classification parameters. These comparators show the CTU, including the CTU multisource, as the most discriminating criterion; his presence adds variability in the image thus allowing a clearer segmentation (homogeneous and non-redundant), a classification both more detailed and more efficient. Indeed, the accuracy changes from 0.5 with the Optics image to 0.74 for the CTU image while confusion decreases from 0.30 (in Optics) to 0.02 (in the CTU).

Depuis une quinzaine d’années, l’émergence des données de télédétection à Très Haute Résolution Spatiale (THRS) et la démocratisation des Systèmes d’Information Géographique (SIG) aident à répondre aux nouveaux besoins croissants d’informations spatialisées. Le développement de nouvelles méthodes de cartographie offre une opportunité pour comprendre et anticiper les mutations des surfaces terrestres aux grandes échelles, jusqu’ici mal connues. En France, l’emploi de bases de données spatialisées sur l’occupation du sol à grande échelle (BD Ocsol GE) est devenu incontournable dans les opérations courantes de planification et de suivi des territoires. Pourtant, l’acquisition de ce type de bases de données spatialisées est encore un besoin difficile à satisfaire car les demandes portent sur des productions cartographiques sur-mesure, adaptées aux problématiques locales des territoires. Face à cette demande croissante, les prestataires réguliers de ce type de données cherchent à optimiser les procédés de fabrication avec des techniques récentes de traitements d’image. Cependant, la Photo-Interprétation Assistée par Ordinateur (PIAO) reste la méthode privilégiée des prestataires. En raison de sa grande souplesse, elle répond toujours au besoin de cartographie aux grandes échelles, malgré son coût important. La substitution de la PIAO par des méthodes de production entièrement automatisées est rarement envisagée. Toutefois, les développements récents en matière de segmentation d’images peuvent contribuer à l’optimisation de la pratique de la photo-interprétation. Cette thèse présente ainsi une série d’outils (ou modules) qui participent à l’élaboration d’une assistance à la digitalisation pour l’exercice de photo-interprétation d’une BD Ocsol GE. L’assistance se traduit par la réalisation d’un prédécoupage du paysage à partir d’une segmentation menée sur une image THRS. L’originalité des outils présentés est leur intégration dans un contexte de production fortement contraint. La construction des modules est conduite à travers trois prestations cartographiques à grande échelle commandités par des entités publiques. L’apport de ces outils d’automatisation est analysé à travers une analyse comparative entre deux procédures de cartographie : l’une basée sur une démarche de photo-interprétation entièrement manuelle et la seconde basée sur une photo-interprétation assistée en amont par une segmentation numérique. Les gains de productivité apportés par la segmentation sont, évalués à l’aide d’indices quantitatifs et qualitatifs, sur des configurations paysagères différentes. À des degrés divers, il apparaît que quelque soit le type de paysage cartographié, les gains liés à la cartographie assistée sont substantiels. Ces gains sont discutés, à la fois, d’un point de vue technique et d’un point de vue thématique dans une perspective commerciale. / Over the last fifteen years, the emergence of remote sensing data at Very High Spatial Resolution (VHRS) and the democratization of Geographic Information Systems (GIS) have helped to meet the new and growing needs for spatial information. The development of new mapping methods offers an opportunity to understand and anticipate land cover change at large scales, still poorly known. In France, spatial databases about land cover and land use at large scale have become an essential part of current planning and monitoring of territories. However, the acquisition of this type of database is still a difficult need to satisfy because the demands concern tailor-made cartographic productions, adapted to the local problems of the territories. Faced with this growing demand, regular service providers of this type of data seek to optimize manufacturing processes with recent image-processing techniques. However, photo interpretation remains the favoured method of providers. Due to its great flexibility, it still meets the need for mapping at large scale, despite its high cost. Using fully automated production methods to substitute for photo interpretation is rarely considered. Nevertheless, recent developments in image segmentation can contribute to the optimization of photo-interpretation practice. This thesis presents a series of tools that participate in the development of digitalization assistance for the photo-interpretation exercise. The assistance results in the realization of a pre-cutting of the landscape from a segmentation carried out on a VHRS image. Tools development is carried out through three large-scale cartographic services, each with different production instructions, and commissioned by public entities. The contribution of these automation tools is analysed through a comparative analysis between two mapping procedures: manual photo interpretation versus digitally assisted segmentation. The productivity gains brought by segmentation are evaluated using quantitative and qualitative indices on different landscape configurations. To varying degrees, it appears that whatever type of landscape is mapped, the gains associated with assisted mapping are substantial. These gains are discussed both technically and thematically from a commercial perspective.

The aim of the project is to perform object based change detection of land cover in specific areas of Czech republic. Landsat 2000 and Spot 2006 satellite images are used as input data. The method used for evaluation of changes is Multivariate Alteration Detection unsupervised method which is based on statistical procedures and is available from e-Cognition software. The results of detection are compared with Corine Land Cover changes database to evaluate degree of parity on detected areas. Different mapping unit is used to be able to detect smaller changes than Corine database. First part of the work is review of literature sources aimed on processing of satellite images, description of the spectral behavior of landscape objects, origins of Corine Land Cover database and principle of change detection using MAD. Second part deals with data adjustment, change detection process and comparison of reached results with Corine. Keywords: object based change detection, satellite images, Corine Land Cover, mapping unit of changes, Multivariate Alteration Detection, e-Cognition

The objective of this licentiate thesis is to develop novel algorithms and improve existing methods for urban land cover mapping and urban extent extraction using multi-temporal remote sensing imagery. Past studies have demonstrated that synthetic aperture radar (SAR) have very good properties for the analysis of urban areas, the synergy of SAR and optical data is advantageous for various applications. The specific objectives of this research are: 1. To develop a novel edge-aware region-growing and -merging algorithm, KTH-SEG, for effective segmentation of SAR and optical data for urban land cover mapping; 2. To evaluate the synergistic effects of multi-temporal ENVISAT ASAR and HJ-1B multi-spectral data for urban land cover mapping; 3. To improve the robustness of an existing method for urban extent extraction by adding effective pre- and post-processing. ENVISAT ASAR data and the Chinese HJ-1B multispectral , as well as TerraSAR-X data were used in this research. For objectives 1 and 2 two main study areas were chosen, Beijing and Shanghai, China. For both sites a number of multitemporal ENVISAT ASAR (30m C-band) scenes with varying image characteristics were selected during the vegetated season of 2009. For Shanghai TerraSAR-X strip-map images at 3m resolution X-band) were acquired for a similar period in 2010 to also evaluate high resolution X-band SAR for urban land cover mapping. Ten  major landcover classes were extracted including high density built-up, low density built-up, bare field, low vegetation, forest, golf course, grass, water, airport runway and major road. For Objective 3, eleven globally distributed study areas where chosen, Berlin, Beijing, Jakarta, Lagos, Lombardia (northern Italy), Mexico City, Mumbai, New York City, Rio de Janeiro, Stockholm and Sydney. For all cities ENVISAT ASAR imagery was acquired and for cities in or close to mountains even SRTM digital elevation data. The methodology of this thesis includes two major components, KTH-SEG and KTH-Pavia Urban Extractor. KTH-SEG is an edge aware region-growing and -merging algorithm that utilizes both the benefit of finding local high frequency changes as well as determining robustly homogeneous areas of a low frequency in local change. The post-segmentation classification is performed using support vector machines. KTH-SEG was evaluated using multitemporal, multi-angle, dual-polarization ASAR data and multispectral HJ-1B data as well as TerraSAR-X data. The KTH-Pavia urban extractor is a processing chain. It includes: Geometrical corrections, contrast enhancement, builtup area extraction using spatial stastistics and GLCM texture features, logical operator based fusion and DEM based mountain masking. For urban land cover classification using multitemporal ENVISAT ASAR data, the results showed that KTH-SEG achieved an overall accuracy of almost 80% (0.77 Kappa ) for the 10 urban land cover classes both Beijign and Shanghai, compared to eCognition results of 75% (0.71 Kappa) In particular the detection of small linear features with respect to the image resolution such as roads in 30m resolved data went well with 83% user accuracy from KTH-SEG versus 57% user accuracy using the segments derived from eCognition. The other urban classes which in particular in SAR imagery are characterized by a high degree of heterogeneity were classified superiorly by KTH-SEG. ECognition in general performed better on vegetation classes such as grass, low vegetation and forest which are usually more homogeneous. It is was also found that the combination of ASAR and HJ-1B optical data was beneficial, increasing the final classification accuracy by at least 10% compared to ASAR or HJ-1B data alone. The results also further confirmed that a higher diversity of SAR type images is more important for the urban classification outcome. However, this is not the case when classifying high resolution TerraSAR-X strip-map imagery. Here the different image characteristics of different look angles, and orbit orientation created more confusion mainly due to the different layover and foreshortening effects on larger buildings. The TerraSAR-X results showed also that accurate urban classification can be achieved using high resolution SAR data alone with almost 84% for  eight classes around the Shanghai international Airport (high and low density built-up were not separated as well as roads and runways). For urban extent extraction, the results demonstrated that built-up areas can be effectively extracted using a single ENVISAT ASAR image in 10 global cities reaching overall accuracies around 85%, compared to 75% of MODIS urban class and 73% GlobCover Urban class. Multitemporal ASAR can improve the urban extraction results by 5-10% in Beijing. Mountain masking applied in Mumbai and Rio de Janeiro increased the accuracy by 3-5%.The research performed in  this thesis has contributed to the remote sensing community by providing algorithms and methods for both extracting urban areas and identifying urban land cover in a more detailed fashion. / <p>QC 20140625</p>

In the last decades, the increasing number of new generation satellite images characterized by a better spectral, spatial and temporal resolution with respect to the past has provided unprecedented source of information for monitoring climate changes.To exploit this wealth of data, powerful and automatic methods to analyze remote sensing images need to be implemented. Accordingly, the objective of this thesis is to develop advanced methods for the analysis of multitemporal multispectral remote sensing images to support climate change applications. The thesis is divided into two main parts and provides four novel contributions to the state-of-the-art. In the first part of the thesis, we exploit multitemporal and multispectral remote sensing data for accurately monitoring two essential climate variables. The first contribution presents a method to improve the estimation of the glacier mass balance provided by physically-based models. Unlike most of the literature approaches, this method integrates together physically-based models, remote sensing data and in-situ measurements to achieve an accurate and comprehensive glacier mass balance estimation. The second contribution addresses the land cover mapping for monitoring climate change at high spatial resolution. Within this work, we developed two processing chains: one for the production of a recent (2019) static high resolution (10 m) land cover map at subcontinental scale, and the other for the production of a long-term record of regional high resolution (30 m) land cover maps. The second part of this thesis addresses the common challenges faced while performing the analysis of multitemporal multispectral remote sensing data. In this context, the third contribution deals with the multispectral images cloud occlusions problem. Differently from the literature, instead of performing computationally expensive cloud restoration techniques, we study the robustness of deep learning architectures such as Long Short Term Memory classifier to cloud cover. Finally, we address the problem of the large scale training set definition for multispectral data classification. To this aim, we propose an approach that leverages on available low resolution land cover maps and domain adaptation techniques to provide representative training sets at large scale. The proposed methods have been tested on Sentinel-2 and Landsat 5, 7, 8 multispectral images. Qualitative and quantitative experimental results confirm the effectiveness of the methods proposed in this thesis.

No description available.

New satellite missions have provided High Resolution (HR) Satellite Image Time Series (SITS), offering detailed spatial, spectral, and temporal information for effective monitoring of diverse Earth features including weather, landforms, oceans, vegetation, and agricultural practices. SITS can be used for an accurate understanding of the Land Cover (LC) behavior and providing the possibility of precise mapping of LCs. Moreover, HR SITS presents an unprecedented possibility for the creation and modification of HR Land Cover Change (LCC) and Land Cover Transition (LCT) maps. For the long-term scale, spanning multiple years, it becomes feasible to analyze LCC and the LCTs occurring between consecutive years. Existing methods in literature often analyze bi-temporal images and miss the valuable multi-temporal/multi-annual information of SITS that is crucial for an accurate SITS analysis. As a result, HR SITS necessitates a paradigm shift in processing and methodology development, introducing new challenges in data handling. Yet, the creation of techniques that can effectively manage the high spatial correlation and complementary temporal resolutions of pixels remains paramount. Moreover, the temporal availability of HR data across historical and current archives varies significantly, creating the need for an effective preprocessing to account for factors like atmospheric and radiometric conditions that can affect image reflectance and their applicability in SITS analysis. Flexible and automatic SITS analysis methods can be developed by paying special attention to handling big amounts of data and modeling the correlation and characterization of SITS in space and time. Novel methods should deal with data preparation and pre-processing at large-scale from end-to-end by introducing a set of steps that guarantee reliable SITS analysis while upholding the computational efficiency for a feasible SITS analysis. In this context, the recent strides in deep learning-based frameworks have demonstrated their potential across various image processing tasks, and thus the high relevance for addressing SITS analysis. Deep learning-based methods can be supervised or unsupervised considering their learning process. Supervised deep learning methods rely on labeled training data, which can be impractical for large-scale multi-temporal datasets, due to the challenges of manual labeling. In contrast, unsupervised deep learning methods are favored as they can automatically discover temporal patterns and changes without the need for labeled samples, thereby reducing the computational load, making them more suitable for handling extensive SITS. In this scenario, the objectives of this thesis are mainly three. Firstly, it seeks to establish a robust and reliable framework for the precise mapping of LCs by designing novel techniques for time series analysis. Secondly, it aims to utilize the capacities of unsupervised deep learning methods, such as pretrained Convolutional Neural Networks (CNNs), to construct a comprehensive methodology for Change Detection (CD), thereby mitigating complexity and reducing computational requirements in comparison with supervised methods. This involves the efficient extraction of spatial, spectral, and temporal features from complex multi-temporal, multi-spectral SITS. Lastly, the thesis endeavors to develop novel methods for analyzing LCCs occurring over extended time periods, spanning multiple years. This multifaceted approach encompasses the detection of changes, timing identification, and classification of the specific types of LCTs. The efficacy of the innovative methodologies and associated techniques is showcased through a series of experiments conducted on HR SITS datasets, including those from Sentinel-2 and Landsat. These experiments reveal significant enhancements when compared to existing methods that represent the current state-of-the-art.

Nowadays, in sub-Saharan Africa (SSA), about 40% of the population is urban and this region is expected to face the highest growth rates during the next decades. By 2100, the three most populated cities in the world will be located in SSA. As a consequence of the extremely fast transformations experienced during the last decades, SSA cities are facing social and environmental issues combined with a lack of financial means and capacity in urban planning and management. The poorest often constitute a large part of the urban population that is extremely vulnerable to health and disaster risks.In SSA cities, up-to-date and spatially detailed geographic information is often missing. This lack of information is an important issue for many scientific studies focusing on different urban issues and there is a real need to improve the availability of geoinformation for these cities in order to support urban planning, urban management, environment monitoring, epidemiology or risk assessment, etc. The work presented in this thesis aims to develop different frameworks for the production of geoinformation. For this purpose, advantage is taken of Very-High Resolution Remote Sensing imagery (0.5 meters) and open-source software. These frameworks implement cutting-edge methods and can handle a large amount of data in a semi-automated fashion to produce maps covering very large areas of interest. In the spirit of open science, the processing chains are entirely based on open-source software and are released publicly in open-access for any interested researchers, in order to make the methods developed completely transparent and in order to contribute to the creation of a pool of common tools and scientific knowledge. These frameworks are used to produce very detailed land-cover and land-use maps that provide essential information such as the built-up density, or the fact that a neighborhood is residential or not. This detailed geoinformation is then used as indicators of presence of populated places to improve existing population models at the intra-urban level. / Option Géographie du Doctorat en Sciences / info:eu-repo/semantics/nonPublished