No description available.

<p></p><p></p><p>The unprecedented properties of 2D materials such as graphene and MoS2 have been researched extensively [1,2] for a range of applications including nanoscale electronic and optoelectronic devices [3–6]. Their unique physical and electronic properties promise them as the next generation materials for electrodes and other functional units in nanostructured devices. However, successful incorporation of 2D materials into devices entails development of high resolution patterning techniques that are applicable to 2D materials. Patterning at the sub-10 nm scale is particularly of great interest as the next technology nodes require patterning of (semi)conductors and insulators at 7 nm and 5 nm scales for nanoelectronics. It will also benefit organic photovoltaic cells as phase segregation of p/n-type semiconducting polymers on 2D electrodes at length scales smaller than the typical exciton diffusion length (10 nm)</p> <p>is expected to improve the charge separation efficiency [7].</p><br><p></p><p></p><p>Characterizing locally modulated properties of non-ovalently functionalized 2D materials requires high-resolution imaging techniques capable of extracting measurements of various physical/chemical properties. One such method is scanning probe microscopy (SPM) [18–21]. In Chapter 1, we present a brief review of SPM modalities, some of which are used to characterize interfacial properties, such as conductivity and local contact potential differences that can be modulated by amphiphilic assemblies [17, 22]. Atomic force microscopy (AFM) is one of main techniques that we use to determine topography. All imaging in this work were performed in attractive AC mode [23,24] in order to minimize disruption to the self-assembly of the amphiphiles by the scanning tip.</p><br><p></p><p></p><p>One challenge of using SAMs for locally modulated functionalization is that the proximity to the nonpolar interface can modify the behavior of the functionalities present on the surface in conjunction with the steric hindrance of 2D molecular assemblies. For instance, ionizable functional groups, one of the strongest local modulators of surface chemistry, undergo substantial pKa shifts (in some cases, > 5 units) at nonpolar interfaces, limiting their ability to ionize. In order to apply molecular assembly to create 2D chemical patterns, we needed to design alternative structures that can avoid such penalties against the intrinsic properties of functionalities present in the assemblies. Among amphiphiles, we observed that the chiral centers of phospholipids have the potential of elevating the terminal functional group in the head from the surface for improved accessibility. We refer to this type of assembly as a ’sitting’ phase. Chapter 2 describes sitting phase assembly of phospholipids; the projection of the terminal functionality allows it to maintain solution phase-like behavior while the dual alkyl tails provide additional stabilizing interactions with the substrates. Given the diversity of phospholipid architecture [25], the sitting phase assembly suggests the possibility of greatly diversifying the orthogonality of the chemical patterns, allowing highly precise control over surface functionalities.</p><br><p></p><p></p><p>While a variety of methods including drop-casting [26–28] and microcontact printing [29] have been used previously by others for noncovalent assembly of materials on the surface, they mostly address patterning scale in the sub-μm range. Here, we utilize Langmuir-Schaefer(LS) transfer, which has been historically used to transfer standing phase multilayers [30], and lying-down domains of PCDA at < 100 nm scales in the interest of molecular electronics [14, 31–33], as our sample preparation technique. LS transfer is remarkable in that the transferred molecules relinquish their pre-existing interactions in the standing phase at air-water interface to undergo ∼ 90◦ rotation and assemble into the striped phase on a substrate. This introduces the possibility of modulating local transfer rate across the substrate by manipulating local environment of the molecules. Thus, LS transfer has the potential to offer spatial control over the noncovalent chemical functionalization of the 2D substrate, essential in device applications.</p><br><p></p><p></p><p>In Chapter 3 and 4, We make comparative studies of various experimental factors such as surface pressure, temperature and molecular interactions that affect the efficiency of LS conversion. Considering the energetics of the transfer process, we predicted that the rate of transfer from the air-water interface to the substrate should be the highest from the regions around defects, which would be the energetically</p> <p>least stable regions of the Langmuir film [34, 35]. In Langmuir films, two phases of lipid assemblies—liquid expanded (LE) and liquid condensed (LC)—often coexist at the low surface pressures (< 10 mN/m) used for sample preparation. Hence, we hypothesized that the microscale structural heterogeneity of Langmuir films could be translated into microscale patterns in the transferred film on HOPG. We compare the transfer rates between LE and LC phases and investigate the impacts of physical conditions during LS transfer such as temperature, packing density, dipping rate and contact time to conclude that local destabilization of Langmuir films leads to increased transfer efficiency. (Chapter 3)</p><p><br></p><p></p><p>As in the case of lipid membranes that reorganize routinely based on the structure of the constituent molecules [36–38], the structure of Langmuir films is strongly dependent on the molecular structures of the constituent molecules [39–43]. Accordingly, we expected the molecular structures/interactions to provide additional control over the LS transfer process. In Chapter 4, we compare domain morphologies and the average coverages between three single chain amphiphiles and two phospholipids, each</p><p></p><p> </p><p>of which contain hydrogen bonding motifs of varying strengths. We show that by influencing the adsorption and diffusion rates, molecular architecture indeed influences LS conversion efficiency and subsequent assembly on the substrate. The presence of strong lateral interactions limits transfer and diffusion, forming vacancies in the transferred films with smaller domain sizes while weaker intermolecular interactions enabled high transfer efficiencies.</p><p></p><p><br></p><p></p>

L’objectif de cette thèse a consisté en la synthèse d’un polymère à empreinte moléculaire (MIP) permettant l’extraction du phosmet, un pesticide organophosphoré largement utilisé en oléiculture. La recherche du monomère fonctionnel (MF) disposant de la meilleure capacité à interagir de manière non-covalente avec le phosmet en présence du solvant porogène le plus approprié a été réalisée pour la toute première fois au moyen d’un capteur à acétylcholinestérase. Cette stratégie innovante a permis une meilleure compréhension des mécanismes cinétiques à l’œuvre lors de l’interaction MF-molécule cible. De par l’importance de son rôle dans la détermination de la structure d’un MIP, le choix d’un agent réticulant aux caractéristiques physico-chimiques adéquates a permis de sélectionner le meilleur MIP en s’appuyant sur l’étude des isothermes d’adsorption selon les modèles de Freundlich et Langmuir. La procédure d’extraction du phosmet selon la procédure MISPE (Molecularly Imprinted Solid Phase Extraction) a été effectuée par le biais d’une cartouche SPE dont la capacité a été évaluée à partir d’une solution standard. La validation du choix des réactifs de MIP sélectionnés a été confortée par la réalisation d’une expérience de réactivité croisée appliquée à une molécule analogue au phosmet. L’extraction du phosmet de l’huile d’olive a pu être effectuée avec succès selon un protocole d’extraction en flux inverse optimisé. Cette étude ouvre ainsi la voie à la recherche de nouvelles interactions MFs-molécules cibles au moyen de biocapteurs enzymatiques inhibant des composés toxiques tels que les herbicides, fongicides et autres pesticides. / The objective of this thesis has been the synthesis of a molecularly imprinted polymer (MIP) for the extraction of phosmet, an organophosphorus pesticide widely used in olive growing. The search for the functional monomer (FM) having the best ability to interact non-covalently with phosmet in the presence of the most suitable pore-forming solvent was carried out for the first time by means of an acetylcholinesterase sensor. This innovative strategy allowed us to better understand the kinetic mechanisms of FM-template interaction. Because of the importance of its role in determining the structure of a MIP, the selection of a crosslinking agent with adequate physicochemical characteristics made it possible to select the best MIP, whose adsorption isotherms were studied according to Freundlich and Langmuir models. Extraction of phosmet using a Molecularly Imprinted Solid Phase Extraction (MISPE) procedure was carried out via an SPE cartridge, whose capacity was evaluated from a standard solution. The choice of reagents and experimental conditions were validated by carrying out selectivity assays using another organophosphorus insecticide. Extraction of phosmet from olive oil was successfully carried out according to an optimized reverse flow extraction protocol. This work opens new opportunities for studying new FM-template interactions by means of enzymatic biosensors capable of detecting other inhibitors such as herbicides, fungicides and other pesticides.

<p>To improve the adsorption capacity of polyacrylonitrile (PAN) fibres, hydrophilic amidoxime fibres were prepared by subsequent conversion of the cyano groups to an amidoxime group by reacting with hydroxylamine at 80&deg / C at an optimum amidoximation time of 2 hrs. The amidoxime fibre was hydrolyzed/alkali treated in a solution of sodium hydroxide to enhance or improve the adsorption properties. This was followed by characterization of the amidoxime and hydrolyzed fibres using Scanning electron microscopy (SEM) / Fourier transform Infrared Spectroscopy (FTIR) and exchange capacity (cationic and anionic). SEM showed that the hydrolysis process made the surface of Amidoxime fibre rougher than that of Polyacrylonitrile fibre. FTIR revealed that the hydrolyzed Amidoxime fibres contained conjugated imine (-C=N-) sequences. Functionalization enhanced the sorption of amidoxime fibres by an increase of 20 % in the cationic exchange capacity. This was achieved by the part conversion of the cyano groups into the carboxylic acid groups. The fibres showed faster kinetics largely due the available exchange sites on the surface of the fibres hence the equilibration was achieved much quicker.</p>

<p>To improve the adsorption capacity of polyacrylonitrile (PAN) fibres, hydrophilic amidoxime fibres were prepared by subsequent conversion of the cyano groups to an amidoxime group by reacting with hydroxylamine at 80&deg / C at an optimum amidoximation time of 2 hrs. The amidoxime fibre was hydrolyzed/alkali treated in a solution of sodium hydroxide to enhance or improve the adsorption properties. This was followed by characterization of the amidoxime and hydrolyzed fibres using Scanning electron microscopy (SEM) / Fourier transform Infrared Spectroscopy (FTIR) and exchange capacity (cationic and anionic). SEM showed that the hydrolysis process made the surface of Amidoxime fibre rougher than that of Polyacrylonitrile fibre. FTIR revealed that the hydrolyzed Amidoxime fibres contained conjugated imine (-C=N-) sequences. Functionalization enhanced the sorption of amidoxime fibres by an increase of 20 % in the cationic exchange capacity. This was achieved by the part conversion of the cyano groups into the carboxylic acid groups. The fibres showed faster kinetics largely due the available exchange sites on the surface of the fibres hence the equilibration was achieved much quicker.</p>

Magister Scientiae - MSc / To improve the adsorption capacity of polyacrylonitrile (PAN) fibres, hydrophilic amidoxime fibres were prepared by subsequent conversion of the cyano groups to an amidoxime group by reacting with hydroxylamine at 80°C at an optimum amidoximation time of 2 hrs. The amidoxime fibre was hydrolyzed/alkali treated in a solution of sodium hydroxide to enhance or improve the adsorption properties. This was followed by characterization of the amidoxime and hydrolyzed fibres using Scanning electron microscopy (SEM); Fourier transform Infrared Spectroscopy (FTIR) and exchange capacity (cationic and anionic). SEM showed that the hydrolysis process made the surface of Amidoxime fibre rougher than that of Polyacrylonitrile fibre. FTIR revealed that the hydrolyzed Amidoxime fibres contained conjugated imine (-C=N-) sequences. Functionalization enhanced the sorption of amidoxime fibres by an increase of 20 % in the cationic exchange capacity. This was achieved by the part conversion of the cyano groups into the carboxylic acid groups. The fibres showed faster kinetics largely due the available exchange sites on the surface of the fibres hence the equilibration was achieved much quicker. / South Africa