This thesis describes experiments to investigate high-altitude relight of a lean direct injection (LDI) combustor. The features that make LDI technology less polluting in terms of NOx compared to conventional combustors are expected to impede relight performance. Therefore an improved understanding of ignition behaviour is required to ensure that stringent relight requirements can be satisfied. Realistic operating conditions are simulated in a ground-based test facility. The application of laser diagnostics presents particular difficulties due to the large quantities ofliquid fuel that impinge on the combustor walls during relight. Advances are made in the application of planar laser-induced fluorescence (PLIF) to monitor fuel placement in a combustor under these conditions. A novel apparatus is developed to deliver a laser sheet to the combustion chamber while protecting all optical surfaces from contamination. The PLIF images are compared with the cold flow field obtained from CFD modelling. These results indicate that fuel becomes trapped inside the central recirculation zone in highconcentrations. High-speed flame imaging performed simultaneously with the PLIF measurements provides important insights into the motion and breakup of flame during relight. An algorithm developed to track the flame activity reveals that the initial spark kernel is convected downstream, before breaking apart and moving upstream towards a recovery origin close to the fuel injector. Analysis of many ignition events has revealed several distinct modes of ignition failure.

MicroRNAs (miRNAs) are a class of small, single-stranded, non-protein coding RNA molecules that regulate cellular messenger RNA (mRNA) and protein levels by binding to specific mRNAs. Aberrant miRNA expression has been shown to be implicated in several diseases, including cancer. Extracellular miRNAs have been found to circulate in the bloodstream and some of their levels have been associated with different diseases. Furthermore, they hold promise as tissue- and blood-based biomarkers for cancer classification and prognostication. Blood-based biomarkers are attractive for cancer screening due to their minimal invasiveness, relatively low cost and ease of reproducibility. New miRNA analysis techniques will add toward the understanding of their biological functions. In this thesis, I investigate the utility of capillary electrophoresis (CE) and mass spectrometry (MS) for analysis of miRNAs through proof-of-concept experiments. In the fi rst part of this work, we developed a Protein-Facilitated Affinity Capillary Electrophoresis (ProFACE) assay for rapid quantification of miRNA levels in blood serum (see List of publications (6)). We also implemented a capillary electrophoresis with laser induced fluorescence detection (CE-LIF) method with online sample pre-concentration for detection of endogenous microRNAs in human serum and cancer cells. 3' modification of miRNA is a physiological and common post-transcriptional event that shows selectivity for specific miRNAs and is observed across species. Recent studies have shown that post-transcriptional addition of nucleotides to the 3' end of miRNAs is a mechanism for miRNA activity regulation. For example, such modifications in plants and C. elegans influence miRNA stability. In humans, effects on miRNA stability and on mRNA target repression have both been observed. Thus, there is a need for miRNA detection techniques which are direct and multiplexed, require minimal sample preparation and provide qualitative information regarding these modifications. We developed a multiplexed miRNA detection technique based on capillary electrophoresis coupled on line with electrospray ionization mass spectrometry (CE-ESI-MS). This method allowed a label-free, direct detection of multiple miRNAs extracted from cancer serum as well as their post-transcriptional modifications with a high mass accuracy.

No description available.

No description available.

No description available.

Laser-induced fluorescence (LIF) has been shown to be potentially useful for identifying microorganisms in real time. It is a selective and sensitive technique because the excitation is performed at one wavelength while the emission is monitored at longer wavelengths so that background from the excitation source can be eliminated. This specialized optical property of LIF can be applied to development of an optical sensor capable of quickly, non-invasively, and quantitatively probing complex biochemical transformations in microorganisms. Various bio-photonic optical fiber sensors based on laser-induced fluorescence (LIF) spectroscopy were developed as diagnostic tools for microorganisms. In the first phase, the enhancement of the sensitivity and selectivity of the optical sensor system focused on diagnosis of human breast cancer cell lines and Azotobacter vinelandii (an aerobic soil-dwelling organism). Autoluorescence spectra from human breast cancer cell lines and Azotobacter vinelandii corresponding to different growth environments were investigated. Then, the study has expanded to include the use of gold nanoparticles for specific DNA detection. The use of gold nanoparticales opens a door into construction of a compact, highly specific, inexpensive and userriendly optical fiber senor for specific DNA detection. An optical fiber laser-induced fluorescence (LIF) sensor based has been developed to detect single-strand (ss) DNA hybridization at the femtomolar level. Effects of various experimental parameters and configuration were investigated in order to optimize sensor performance and miniaturize sensor size.

Planar Laser Induced Fluorescence (PLIF) with acetone seeding was applied to measure the scalar fields of an axisymmetric freejet and an inclined jet-in-crossflow as applicable to film cooling. From the scalar fields, jet-mixing and trajectory characteristics were obtained. In order to validate the technique, the canonical example of a nonreacting freejet of Reynolds Numbers 900-9000 was investigated. Desired structural characteristics were observed and showed strong agreement with computational modeling. After validating the technique with the axisymmetric jet, the jet-in-crossflow was tested with various velocity ratios and jet injection angles. Results indicated the degree of wall separation for different injection angles and demonstrate both the time-averaged trajectories as well as select near-wall concentration results for varying jet momentum fluxes. Consistent with literature findings, the orthogonal jet trajectory for varying blowing ratios collapsed when scaled by the jet-to-freestream velocity ratio and hole diameter, rd. Similar collapsing was demonstrated in the case of a non-orthogonal jet. Computational Fluid Dynamic (CFD) simulations using the OpenFOAM software was used to compare predictions with select experimental cases, and yielded reasonable agreement. Insight into the importance and structure of the counter rotating vortex pair and general flow field turbulence was highlighted by cross validation between CFD and experimental results.

L’optimisation des chambres de combustion est généralement réalisée à l'aide d’outils desimulation numérique. Lorsque le carburant est injecté sous forme liquide, la qualité des simulationsdépend en partie de la définition des conditions aux limites imposées pour cette phase à proximité del'injecteur (diamètre, vitesse et flux volumique des gouttes, vitesse de glissement entre phases). Cesconditions aux limites sont généralement définies à partir d'une analyse expérimentale dans desconditions réalistes d’injection, qui fait appel, dans le meilleur des cas, à l’utilisation del’Anémogranulomètre Phase Doppler (PDA). Cependant, cette technique ponctuelle est coûteuse entemps pour une caractérisation globale de l’injecteur et fournit une mesure des flux volumiques avecdes limitations. Il est également difficile d’accéder à des grandeurs telles que la vitesse de la phasegazeuse en présence des gouttes. Pour répondre à cette problématique, il paraît judicieux de mettre enœuvre des techniques de diagnostic optique spatialement résolues. Cette étude consiste à développer des techniques optiques de champ couplant des approches basées sur la diffusion de Mie, sur l'émission fluorescente des gouttes ou de traceurs et utilisant des algorithmes de type PIV, pour caractériser de manière simultanée et quantitative la granulométrie, la vitesse et le flux volumique de la phase dispersée, ainsi que la vitesse de la phase continue dans les brouillards de gouttes au sein d’une configuration réaliste de foyer aéronautique. Une attentionparticulière est portée à l'étude de la précision de la mesure. Ainsi, des comparaisons sont effectuéesavec des bases de données complètes obtenues à l’aide du PDA. L'analyse de ces résultats estconfrontée aux modèles de l'optique physique régissant les phénomènes de fluorescence et dediffusion de la lumière par des particules à l’aide de simulations. Cette démarche nous permetd'interpréter efficacement les résultats obtenus par imagerie directe et de définir les paramètresd'acquisition et de traitement assurant une précision optimale des mesures. / The optimization of combustion chambers is generally carried out using numerical simulation tools.When fuel is injected in liquid form, the simulation quality depends on the boundary conditionsimposed to this phase close to the injector (diameter, velocity and volume flux of the droplets, slipvelocity between phases). These boundary conditions are usually set from an experimental analysisunder realistic conditions of injection, which in the best case uses Phase Doppler Anemo-granulometry(PDA). However, this point measurement technique is time consuming for an overall injectorcharacterization and provides a measurement of the volume flux with some limitations. It is alsodifficult to access variables such as the velocity of the gas phase in the presence of droplets. Toaddress this problem, it seems appropriate to implement spatially resolved optical diagnostictechniques. This study consists in the development of optical field techniques which combine approaches based onMie scattering, fluorescent emission from droplets or tracers and use PIV algorithms to characterizesimultaneously and quantitatively size, velocity and volume flux of the dispersed phase, and velocityof the continuous phase in droplet sprays in a realistic configuration of aeronautical injector. Aparticular attention is given to the study of the measurement accuracy. Thus, comparisons are carriedout with complete databases obtained with the PDA. The analysis of these results is faced withphysical optics models governing phenomena of fluorescence and light scattering by particles usingsimulations. This approach allows us to effectively interpret the results obtained by direct imaging anddefine acquisition and processing parameters ensuring optimum accuracy.

Les exigences de plus en plus élevés concernant la qualité et propriétés de couches minces ont soutenu le développement de nouveaux procédés de pulvérisation. Ainsi, la décharge magnétron conventionnelle en courant continu, une des sources d’atomes la plus utilisée pour le dépôt de couches minces, a été améliorée par le couplage avec une décharge additionnelle de radio fréquence pour obtenir le nouveau procédé RF-IPVD (Radio Frequency-Ionized Physical Vapour Deposition). Ce procédé permet de générer un degré d’ionisation supérieur à celui dans la décharge magnétron classique, nécessaire pour contrôler les propriétés des couches minces. Un procédé alternatif pour augmenter d’avantage l’ionisation consiste à appliquer des impulsions haute puissance sur la cathode HPPMS (High Power Pulsed Magnetron Sputtering), pour des durés courtes de l’ordre de ųs ou dizaines de ųs. L’étude menée porte sur les phénomènes de pulvérisation et de transport des espèces du métal dans ces trois versions de la décharge magnétron par les moyens de spectroscopie laser à l’aide des diodes laser accordables. Le développement récent de ces diodes nous a permis de sonder les niveaux fondamentaux du Titane et de l’Aluminium, et de caractériser la dépendance spatiale de la densité et température ainsi que la fonction de distribution en vitesse de ces atomes. L’effet des paramètres clés, comme l’intensité du courant et la pression du gaz, est étudie et décrit pour la décharge magnétron conventionnelle. La distribution spatiale et angulaire de la fonction de distribution en vitesses a été mesurée dans la région devant la cible magnétron, afin de caractériser les flux du métal et leur comportement dans le volume de la décharge. L’étude sur les atomes du métal dans le procédé RF-IPVD est concentrée sur l’effet de la décharge additionnelle sur le dépeuplement du niveau fondamental. Une efficacité plus grande des processus d’ionisation est trouvée à plus haute pression et plus haute puissance RF injecté. On a montré aussi que les atomes affectés par les processus d’ionisation sont ceux thermalisées, tandis que la distribution de atomes rapides n’est quasiment pas affectés par la décharge additionnelle.Le diagnostic de la décharge pulsée a nécessité le développement d’une nouvelle procédure expérimentale, capable de suivre l’évolution de la densité et de la température des espèces neutres avec une résolution de l’ordre de la ųs. Cette procédure nous a servi pour décrire l’évolution spatio-temporel des atomes du métal (Ti et Al) et les atomes métastables d’Ar. Ces études offrent une vue globale sur le transport de atomes pulvérisés pendant la post décharge, ainsi qu’une description du fonctionnement de la décharge pulsé via la création des métastables d’Argon. / The higher requirements on the thin films quality have supported the development of new sputtering techniques. Thus, the conventional DC magnetron discharge, one of the most widely used source of atoms for thin film deposition, has been improved by the addition of an auxiliary radio frequency discharge - new technique called RF-IPVD (Radio Frequency -Ionized Physical Vapor Deposition). This technique highly increases the ionization degree compared to conventional magnetron discharge, which is necessary for a better control of the thin films properties. An alternative method to increase the ionization is based on the use of high power pulses on the cathode, HPPMS (High Power Pulsed Magnetron Sputtering), for short periods of time ranging from ųs to tens of ųs.The present study focuses on the sputtering phenomena and the transport of metal sputtered species in these three versions of the magnetron discharge, by means of laser spectroscopy using tunable laser diodes. The recent developments of these diodes have allowed to probe the fundamental levels of titanium and aluminum, and to characterize the spatial dependency of the density and temperature as well as the velocity distribution functions of these atoms. The effect of key discharge parameters, such as current intensity and gas pressure, is studied and described for the conventional magnetron discharge. The spatial and angular velocity distribution functions were measured in front of the magnetron target, in order to characterize the metal fluxes and their behavior in the discharge volume.The study on the metal atoms in the RF-IPVD process is focused on the effect of the additional discharge on the depopulation of the ground state level. Higher ionization efficiency is found at relatively high pressure and it increases with the injected RF power. It was also showed that the thermalized atoms are the ones involved in the ionization process, while the distribution of fast atoms is almost unaffected by the additional discharge.The diagnostics of the HPPMS discharge required the development of a novel experimental procedure, able to monitor the density and temperature of neutral species with a time resolution of ųs. This procedure was used to describe the spatiotemporal evolution of metal atoms (Ti and Al) and Ar metastable atoms. These studies provide an overview on the transport of sputtered atoms during the afterglow, and a description of the pulsed discharge operation, via the creation of metastable argon atoms.

A UV Laser Induced Fluorescence (LIF) system, previously developed in our laboratory, was modified and used for a series of applications related to the development and optimization of UV LIF spectroscopic measurements of trace contaminants in drinking water and other water sources. Fluorescence spectra of a number of water samples were studied, including those related to the reverse osmosis water treatment and membrane fouling, domestic and international drinking water, industrial toxins, bacterial spores, as well as several fluorescence standards. Of importance was that the long term detection of the trace level of Dissolved Organic Compounds (DOC) was measured, for the first time to our knowledge, over a one week period and with a time resolution of 2.5 minutes. A comparison of LIF emission using both 266 nm and 355 nm excitation was also made for the first time. Such real-time and continuous measurements are important for future water treatment control. The LIF system was modified to accommodate UV Light Emitting Diodes (LED) as alternative excitation sources, and tested for the detection of trace organic species in water. In addition, a compact system using LED excitation and a spectrometer was xviii developed and underwent initial testing. The original LIF system had two laser sources, 266 nm and 355 nm. The additional sources incorporated in the system were UV LEDs emitting at 265 nm, 300 nm, 335 nm and 355 nm. The LED spectral emission was studied in detail, in terms of spectral variability and power output. It was found that all LEDs had some emission in the visible spectrum, and an optical filter was used to remove it. The signal-to-noise ratio for the LED-based systems was determined and compared with that of the LIF system. The fluorescent signal of the LED-based system was smaller by 1 to 2 orders of magnitude, despite the fact that the LED pulse energy was 2 to 3 orders of magnitude less than the laser's. As such, the fluorescent signal from the LED was greater than expected. Therefore, a UV LED may be a compact and much cheaper optical source for future water measurement instruments.