Published Article / A component, which has a perfect combination of different materials (probably including homogeneous materials and three different types of heterogeneous materials) in its different portions for a specific application, is considered as the component made of a multiphase perfect material. To fabricate such components, a hybrid layered manufacturing process has been developed. In order to accurately spray different materials with their required volume fractions for every pixel during fabrication, it is important to investigate its spraying operation. This paper establishes the behavior model of the spraying device and proves its validity using digital simulations.

Published Article / Extensive work has been done in the area of manufacturing implants for medical purposes, and more recently the development of customised implants. Areas of application include cranio/maxillo-facial implants, dental drill guides, hip, knee and shoulder replacements, as well as different implants for the spine. Due to their high prevalence and complex anatomical geometry the purpose of this study is to investigate the current state of the industry regarding customised medical implants for cranio/maxillofacial and orthopaedic surgery. Implant customisation has far-reaching benefits, and a collective approach to solving current difficulties will require an in-depth study of successes already achieved. Several issues in this regard are examined, including what defines customisation, regulatory issues that govern customisation and design constraints, trends in different areas of application, suitable materials, and finally which manufacturing techniques are being employed, with a focus on the use of Layer Manufacturing technologies and their role in custom-made medical implants.

Published Article / Rapid tooling (RT) in the context of this research presents the possibility of improving the traditional investment casting process by shortening lead times while still maintaining affordable costs and required quality. Various rapid prototyping processes are available that can be used to create direct metal, polymer or wooden dies for this casting technology. This paper presents results gained in an AMTS project, focusing on RT development for investment casting of light metals. One of the most widely used layer manufacturing processes available in South Africa is selective laser sintering. A machine produced by the German manufacturer EOS (process known as laser sintering) utilising this technology was selected for the study. Two of the materials that are suitable for rapid die making are used, which in tum reflects different mechanical properties and process economics. A standard benchmark part was used as a study base. Two dies were built, one in alumide and one in polyamide. A comprehensive measurement programme was conducted, followed by an appropriate statistical analysis and evaluation regarding accuracy and surface finish. A number of wax patterns were produced. The best wax patterns from each die were selected and evaluated. The subsequently produced castings in AI, Mg and TI were further examined and evaluated. Various issues concerning the reinforcement, wax injection, pattern removal, accuracy and surface finish of the dies are discussed in the paper. The research concludes that rapid tooling techniques can be successfully used for creating accurate dies in order to shorten lead times in the investment casting process chain.

Laser Melting (LM) is an Additive Layer Manufacturing (ALM) process used to produce three-dimensional parts from metal powders by fusing the material in a layerby- layer manner controlled by a CAD model. During LM, rapid temperature cycles and steep temperature gradients occur in the scanned layers. Temperature gradients induce thermal stresses which remain in the part upon completion of the process (i.e. residual stresses). These residual stresses can be detrimental to the functionality and structural integrity of the built parts. The work presented in this thesis developed a finite element model for the purpose of investigating the development of the thermal and residual stresses in the laser melting of metal powders. ANSYS Mechanical software was utilised in performing coupled thermal-structural field analyses. The temperature history was predicted by modelling the interaction of the moving laser heat source with the metal powders and base platform. An innovative ‘element birth and death’ technique was employed to simulate the addition of layers with time. Temperature dependent material properties and strain hardening effects were also considered. The temperature field results were then used for the structural field analysis to predict the residual stresses and displacements. Experiments involving laser melting Ti-6Al-4V powder on a steel platform were performed. Surface topography analyses using a laser scanning confocal microscope were carried out to validate the numerically predicted displacements against surface measurements. The results showed that the material strain hardening model had a direct effect on the accuracy of the predicted displacement results. Using the numerical model, parametric studies were carried out to investigate the effects of a number of process variables on the magnitude of the residual stresses in the built layers. The studies showed that: (i) the average residual stresses increased with the number of melted powder layers, (ii) increasing the chamber temperature to 300°C halved the longitudinal stresses. At 300°C, compressive stresses appeared on the Ti64 surface layer, (iii) reducing the raster length from 1 mm to 0.5 mm reduced the average longitudinal stress in the top layer by 51 MPa (0.04σy), (iv) reducing the laser scan speed from 1200 mm/s to 800 mm/s increased the longitudinal stress by 57 MPa (0.05σy) but reduced the transverse stress by 46 MPa (0.04σy).

Total Hip Arthroplasty (THA) is an orthopaedic procedure that is performed to reduce pain and restore the functionality of hip joints that are affected by degenerative diseases. The outcomes of THA are generally good. However, the stress shielding of the periprosthetic femur is a factor that can contribute towards the premature loosening of the femoral stem. In order to improve the stress shielding characteristics of metallic femoral stems, stiffness configurations that offer more flexibility should be considered. This research has investigated the potential of more flexible and lightweight cobalt chromium molybdenum (CoCrMo) femoral stems that can be manufactured using Selective Laser Melting (SLM). Square pore cellular structures with compressive properties that are similar to human bone have been presented and incorporated into femoral stems by utilising fully porous and functionally graded designs. A three dimensional finite element model has been developed to investigate and compare the load transfer to the periprosthetic femur when implanted with femoral stems offering different stiffness configurations. It was shown that the load transfer was improved when the properties of the square pore cellular structures were incorporated into the femoral stem designs. Factors affecting the manufacturability and production of laser melted femoral stems have been investigated. A femoral stem design has been proposed for cemented or cementless fixation. Physical testing has shown that a functionally graded stem can be repeatedly manufactured using SLM, which was 48% lighter and 60% more flexible than a traditional CoCrMo prosthesis. The research presented in this thesis has provided an early indication of utilising SLM to manufacture lightweight CoCrMo femoral stems with levels of flexibility that have the potential to reduce stress shielding in the periprosthetic femur.

Thesis (MScEng (Industrial Engineering))--University of Stellenbosch, 2008. / This thesis forms part of the AMTS Project on Investment Casting Capabilities for Light Metal Alloys in South Africa, the focus area being Rapid Tooling Development. Various issues of the investment casting process are being discussed from an industrial engineering point of view. These issues are related to the possibilities of improving the investment casting process’ lead times by shortening it while still maintaining affordable costs and required quality. Hereby the possibilities given by the newly developed “rapid technologies” are investigated. The focus is on Rapid Pattern Making as one of the most essential components for accelerated development of new products. Three of the most widely used layer manufacturing processes available in South Africa are selected for the study, namely Three Dimensional Printing – Drop-on-Bed (ZCorporation), Selective Laser Sintering (EOS) and Three Dimensional Printing – Drop-on-Drop (ThermoJet - 3D Systems). These three methods represent different materials; therefore different mechanical properties, different process economics as well as different technological characteristics. A standard benchmark part is used as a study base. Four patterns are produced by these three methods. A comprehensive measurement programme is conducted, followed by an appropriate statistical analysis and evaluation regarding accuracy and surface finish. Rapid Die Making is analysed with the possibilities of using additive methods for rapid tooling. Two dies are built with the same technology – Selective Laser Sintering (EOS), but in different materials. The same evaluation methodology is used for the statistical analysis and comparison. The two dies are injected with wax in order to produce the original benchmark part. The best wax patterns from each die are selected and evaluated, using the same methodology for analysis and comparison. The current state of Direct Shell Production is shortly discussed. The research concludes that RP&T techniques can successfully be used for creating accurate patterns and dies in order to shorten lead times in the investment casting process chain. Each RP&T process has its own set of advantages and disadvantages. All users should evaluate their requirements and the capabilities of the variety of techniques before deciding on a process to apply.

Les procédés de fabrication additive sont aujourd'hui de plus en plus utilisés dans l'industrie. Parmi les différentes technologies existantes, les procédés additifs métalliques, et notamment les procédés en couches, sont les plus prometteurs pour la conception de produits mécaniques. Des travaux ont été menés sur la thématique de la conception de produits réalisés par ces moyens, il traitent principalement du choix du procédé le plus adapté, de l'optimisation de formes ou présentent des cas de reconception. Il n'existe cependant pas de démarche globale de conception de produits qui permettent de prendre en compte les spécificités des procédés additifs en couches, notamment leurs contraintes de fabrication.Lors de ce travail de thèse, les changements que ces procédés introduisent dans le domaine des possibles en conception de produits ont été montrés et illustrés par des pièces réalisées par EBM. De nouvelles opportunités s'offrent au concepteur, comme l'accès à l'ensemble du volume de fabrication, la facilité de réalisation de pièces complexes, la possibilité de réaliser des treillis tridimensionnels et la capacité de produire des mécanismes sans assemblage. Les contraintes de fabrication de ces procédés sont spécifiques. Les phénomènes thermiques lors de la fabrication ont une incidence sur la fabricabilité et la qualité des pièces. La phase de retrait de poudre impose quant à elle des contraintes d'accessibilités. Pour prendre en compte cette évolution, il est nécessaire de concevoir spécifiquement les pièces pour la fabrication additive.Le procédé EBM est au centre du travail réalisé. Il s'agit d'un moyen de fabrication additive en couches, par fusion, à l'aide faisceau d'électrons. Les phénomènes thermiques, qui peuvent causer déformations et mauvaise intégrité de la matière, l'opération de dépoudrage et la problématique de la qualité des pièces fabriquées par EBM ont fait l'objet de caractérisations expérimentales. La durée de fabrication et le coût de revient technique des pièces réalisées par EBM ont également été étudiés, afin d'établir la relation entre durée, coût et géométrie des pièces.Pour de prendre en compte les contraintes explicitées auparavant, et pour bénéficier des importantes libertés que ce procédé offre aux concepteurs, une démarche de conception a été proposée. Cette démarche consiste à générer une ou plusieurs géométries initiales, soit directement par le concepteur, soit par l'utilisation d'outils d'optimisation topologique, à partir de données extraites du cahier des charges. Une fois le balançage de la pièce choisi (en prenant en compte les contraintes de fabrication, le tolérancement de la pièce et la productivité de la fabrication), la pièce est modélisée en incluant un jeu de paramètres pour effectuer une optimisation paramétrique. Cette optimisation permet de dimensionner la pièce, tout en prenant en compte les contraintes de fabrication. A l'issue de cette phase d'optimisation, la géométrie finale est obtenue en prenant en compte les exigences des opérations de parachèvement éventuelles et en définissant les supports, s'ils sont nécessaires. Cette démarche a été illustrée par la reconception de deux pièces mécaniques qui répondent aux exigences de leur cahier des charges fonctionnel, sont fabricables à l'aide du procédé EBM et offrent des gains de masse importants.Enfin, un chapitre particulier est consacré aux perspectives mises en évidence (et ayant parfois fait l'objet de travaux préliminaires) à l'occasion de ce travail de thèse. / Nowadays, the use of Additive Manufacturing processes keeps growing in the industry. Among the numerous kinds of AM processes, metallic additive manufacturing processes, and metallic Additive Layer Manufacturing in particular, are the most interesting from a mechanical designer point of view. Several research studies have been conducted on the topic of Design For Additive Manufacturing, mostly discussing the choice of AM processes or presenting the redesign of parts. There is no specific design methodology for ALM processes that takes their specificities into account.During this PhD thesis, the changes that ALM processes bring to the design space were investigated. The designer has the opportunity to easily manufacture thin parts, complex parts, lattice structures or mechanisms that don't need any assembly. These processes also have specific manufacturing constraints compared to conventional processes. The heat dissipation is the most important factor since it can cause distortions and porosities. Powder removal, surface and geometrical quality also need to be considered during design. A specific design for additive manufacturing methodology is necessary to take these changes into account.This work focuses on the Electron Beam Manufacturing process. Experiments were conducted and analyzed to assess the manufacturability regarding the thermal phenomena (during melting), the powder removal and the quality of the parts produced by EBM. The impact of the part geometry on manufacturing duration and manufacturing cost was also established.In order to use allow designers to use these pieces of information, we suggested a designing methodology. From the requirements of the parts, one or several parts are generated by the designer or by using topological optimization tools. The orientation of the part inside the manufacturing space is set before designing a refined parametric geometry. This parametric geometry is optimized in order to meet the user requirements as well as the EBM requirements. The last step is the modification of the geometry to comply with the finishing operations (machining allowances for example) and the placement of supports, if needed. This methodology was illustrated with the redesign of two example parts and showed important mass savings from the parts (while meeting user and process requirements).The prospects discovered and highlighted during this work, some of which were preliminary investigated, are presented in a specific chapter.