Spelling suggestions: "subject:"lewis acids"" "subject:"lewis àcids""
41 |
Transbuccal drug delivery: In vitro characterization of transport pathway of buspirone and bioadhesive drug delivery systemBirudaraj, Kondamraj 01 January 2001 (has links) (PDF)
The objective of this research was to investigate two important aspects of buccal drug delivery, transport and mucoadhesion. Buspirone was chosen as a model drug for the in vitro buccal transport studies, polyvinyl alcohol and sodium alginate polymer blends were prepared to investigate the mucoadhesive properties through a Lewis acid-base approach and finally, the effect of formulation factors on the force of mucoadhesion, surface energy parameters, release rate and flux was studied. In vitro permeation studies were conducted to investigate the buccal transport pathway of buspirone. Mathematical models were developed to quantify the process of permeation. Permeation enhancement of buspirone across the buccal mucosa was investigated using bile salts (sodium glycocholate and taurodeoxycholate), propylene glycol, propylene. Effect of formulation factors like drug, enhancer, and plasticizer was studied through statistically designed experiments. These experiments aided in characterizing the buccal delivery system. Mathematical models were developed for surface energy parameters, force of mucoadhesion, release rate, and flux. Research conducted in this dissertation focused on two important aspects of transbuccal delivery, drug transport and mucoadhesion by studying a model drug and polymer blends. The results obtained in these investigations can be utilized in the development of other bioadhesive delivery systems with respect to drug transport and mucoadhesion. Polymer blends of polyvinyl alcohol (PVA) and sodium alginate (Alg) were prepared to evaluate their mucoadhesive properties and investigate mucoadhesive mechanism by a Lewis acid-base approach. (Abstract shortened by UMI.)
|
42 |
Asymmetric cyclization reactions through an enamine/acid cooperative approach. Synthesis of unsymmetrically functionalized benzoporphyrinsDeng, Yongming 25 July 2014 (has links)
No description available.
|
43 |
Mechanism and application of Lewis and Brønsted acid effects in organotransition metal catalysisBecica, Joseph January 2019 (has links)
The essential questions of the dissertation research described here address concepts in homogeneous catalysis and organometallic chemistry, with a focus on method development for catalytic reaction applications in organic synthesis. The unifying theme throughout the research is the development of rational design principles for cooperative catalysis through both mechanistic and empirical study. Cooperative catalysis – in which multiple catalysts enable increased activity or selectivity versus a single catalyst system – can involve some combination of a transition metal, Lewis acid, and Brønsted acid. Chapter 1 reviews the literature regarding the cooperativity of transition metal and Lewis acid catalysis, and discusses four main areas in organic synthesis and the facilitation of these trnasformations by Lewis acids: (a) C-C bond and C-H activation, (b) hydrogenolysis of carboxylic acid derivates and ethers, (c) Au catalyzed alkyne activation and cyclization reactions, and related reactions, and (d) Pd catalyzed C-C and C-N bond forming reactions. These different topics are selected based on the mechanistic insight provided into the nature of transition metal-Lewis acid cooperativity. Chapter 2 describes the observation of Lewis acid acceleration of a Pd catalyzed C-N bond coupling. The synthetic methodology is elaborated using metal triflates as cocatalysts, and Lewis acid acceleration is observed for a variety of different N-nucleophiles. Qualitative mechanistic study implicates the role of halide anions in inhibiting this catalytic reaction, and it is proposed that metal triflates are competent to accelerate catalysis by binding halide anions, and therefore attenuating halide inhibition. This hypothesis is supported by initial rate measurements and 31P NMR experiments. Rationalizing trends observed in the reactivity of Lewis acids in the cooperative reactions described in Chapters 1 and 2 is challenging. Therefore, our goal was to provide further insight into the behavior or Lewis acids in complex reaction settings. Inspired by 31P NMR experiments from Chapter 2, a next generation NMR probe to observe anion exchange reactions of metal triflate Lewis acids is developed. Metal-ligand titrations are performed for a variety of metal triflates with complexes of the type (POCOP)Pd(X) (X = Cl, Br, I, OAc) to observe a variety of different X anion affinities for metal triflates. The determined parameters are discussed within the context of Lewis acid catalyzed reactions, along with other Lewis acidity parameters, such as hydrolysis constants and effective charge density. The data suggest that the chloride and iodide anion affinities of a Lewis acid represent a continuum of π-acidity (high anion affinity) and propensity to dissociate into cationic Mz+ species (low anion affinity). The anion affinities do not correlate with the tendency of a metal salt to release Brønsted acids or their respective effective charge densities. Based on the insight into Lewis acidity from Chapters 1 and 3, the parallel between Brønsted and Lewis acids is realized, and the role of both Brønsted and Lewis acids in mediating organic reactions is often related. In Chapter 4, further questions into the cooperativity of π-acids and Brønsted acids is explored. It is demonstrated that selectivity of alkene isomerization can be controlled through a cooperative system. A series of Mo(0) complexes are prepared and explored in their ability to mediate the conversion of terminal alkenes to internal alkenes, and the reaction is found to be promoted by Brønsted acid (TsOH) cocatalyst. Rational design principles are developed to maximize selectivity for (Z)-2-alkenes in this catalyst system. It is proposed that TsOH acts to generate a catalytic MoH species which mediates catalysis, and the role of phosphine ligands is critical in inhibiting the formation of less selective isomerization catalysts. Chapter 5 and 6 entail further method development for catalytic reactions based on the mechanistic wisdom described in previous chapters. High throughput experimentation is employed to rapidly assess conceptual aspects of Pd catalysis, such as ligand and additive effects, and facilitate catalyst discovery and optimization. Based on the substrate scope performed in Chapter 2, it was realized there is a knowledge gap in the ability to synthesize tertiary sulfonamides, both in terms of conventional methods, or modern Pd-catalyzed methods. A significant advance in organic reaction methodology is described: a new Pd catalyst featuring the AdBippyPhos ligand is discovered to be apt for the coupling of secondary sulfonamides with heteroaryl halides to yield tertiary N-heteroarylhalides. Using high throughput experimentation, 24 diverse heterocycles are screened with 12 sulfonamide variants to prepare >100 new products on microscale. Computational modelling reveals the unique steric parameters of the AdBippyPhos ligand, and a mechanistic rationale for its success in catalysis is provided. Lastly, Chapter 6 describes the use of a LiOTf additive to control the selectivity of Pd-catalyzed C-C bond forming reactions. In the presence of LiOTf, a Mizoroki-Heck type reaction, the alkenylation of an aryl halide with a vinyl ether, proceeds with regioselectivity. In the absence of LiOTf, a solvent (CH3CN) activation pathway proceeds to give benzyl nitrile products. High throughput microscale reactions discovered that the Pd/xantphos catalyst is uniquely selective to provide branched styrenes when using the Cs2CO3/CH3CN base/solvent combination. However, reaction performance differed on large scale reactions, where LiOTf was necessary to observe the Mizoroki-Heck reaction pathway. Mechanistic study, in the form of kinetic experiments and 31P NMR experiments, focused on the role of LiOTf in affecting chemoselectivity. It is proposed that xantphos oxidation is responsible for mediating the Mizoroki-Heck reaction pathway, whereas in the absence of xantphos oxidation, CH3CN α-arylation ensues. Due to the insoluble nature of the catalyst materials, xantphos oxidation is ordinarily slow under anaerobic conditions due to mass transfer limitation. LiOTf generates a soluble [(xantphos)Pd(NCCH3)2][OTf]2 and potentially mediates the formation of xantphos-monoxide catalyst which is competent for alkenylation. / Chemistry
|
44 |
Ferrocene based Lewis acids for anion sensingBroomsgrove, Alexander Edward John January 2010 (has links)
The synthesis, characterisation and anion binding properties of a series of mono- and bifunctional Lewis acidic borylferrocene compounds are described within this thesis. The original parent compound FcBMes₂ (3.1), revealed a versatile route for the synthesis of such borylferrocenes and subsequently the analogous compound Fc*BMes₂ (3.2) was synthesised. The anion binding properties of (3.1) and (3.2) were investigated and both were shown to bind one equivalent of cyanide. The binding event was signalled by an electrochemical shift (ca. -560 mV) and a quenching of bands at 510 or 542 nm respectively in the UV/Vis spectrum, while the mode of anion binding in the solid state was established by X-ray crystallography for [<sup>n</sup>Bu₄N]⁺[(3.1)·CN]⁻. Incorporation of a suitable redox active dye (i.e. tetrazolium violet for 3.2) allowed conversion of the electrochemical response to a colorimetric change on cyanide binding. However, a competing response for fluoride is also seen for (3.1) and (3.2). Thus a two component system is reported involving (3.2) and the boronic ester FcB(OR)₂ (3.4), [where (OR)₂ = OCH(Ph)CH(Ph)O], which from previous research is known to selectively bind fluoride, and allows for selective colorimetric cyanide sensing by simple Boolean AND/NOT logic. 1,4-C₆H₄(BMes₂)[B(OR)₂] (3.5), 4,4-C<sub>12</sub>H₈(BMes₂)[B(OR)₂] (3.6) and 1,1′-fc(BMes2)(B(OR)2) (3.7) were synthesised as possible single molecules for discrimination between cyanide and fluoride. (3.5) and (3.6) proved only capable of binding one equivalent of either anion, (3.7) showed some ability to bind two equivalents of fluoride however based on ESI-MS studies although only in the presence of a large excess of anion. Systematic variation of the para-boryl substituent was investigated by synthesis of compounds FcB(Xyl<sup>F</sup>)₂ (4.1), FcB(Xyl)₂ (4.2) and FcB(Xyl<sup>OMe</sup>)₂ (4.3). Anion binding studies reveal a linear increase in fluoride binding affinity consistent with that expected based on the para,/em>-Hammett parameters, however with only minor differences, while no pattern is observed with respect to their cyanide binding capabilities. The addition of neutral and cationic peripheral substituents has been investigated through synthesis of [1,2-fc(CH₂NMe₂)BMes₂] (4.6) and [1,2-fc(CH₂NMe₃)BMes₂]⁺ (4.7). Subsequent binding studies revealed (4.6) to be moisture sensitive, however reaction of (4.7) with fluoride and cyanide led to formation of the adducts [(4.7)·F]⁻ and [(4.7)·CN]⁻. The anion affinity of (4.7) exhibits a substantial increase when compared to the parent compound (3.1). Even when compared to the isomeric 1,1′ system an increase of approximately three orders of magnitude is seen attributed to the closer nature of the cationic charge and in the fluoride adduct the presence of a cooperative intramolecular hydrogen bond. The 1,1′-bifunctional analogues of the mono-substituted systems were synthesised [e.g. 1,2-fc(BMes₂)₂ (5.1)] and shown to complex two equivalents of fluoride or cyanide in acetonitrile. The 1:1 cyanide adduct of (5.1) was isolated in chloroform however, no evidence for chelation was observed. The analogous systems 1,2-fc(BMes₂)₂ (5.5), 1,2-fc(BXyl₂)2 (5.7), and 1,2-fc(BMes₂)(BXyl₂) (5.8) were also investigated. Reaction of (5.5) with fluoride and cyanide revealed it to bind only one equivalent of either anion, neither however was bound in a chelating fashion although X-ray crystallography revealed cyanide binds exo whilst fluoride binds endo to the B···B cavity. Finally the kinetics of fluoride binding were studied by UV/Vis spectroscopy and showed a systematic increase in rate constant upon reduction of steric bulk.
|
45 |
Regio- und stereoselektive Synthese von Sesquiterpenen und hormonell aktiven CholesterinderivatenSchmidt, Arndt W. 11 June 2007 (has links) (PDF)
In der vorliegenden Arbeit wird die Anwendung der Lewis-Säure vermittelten Cycloadditionen von Allylsilanen an alpha,beta-ungesättigte Carbonylverbindungen beschrieben. Das Sesquiterpen Isocomen wurde unter Anwendung der [3+2]-Cycloaddition an Enone synthetisch hergestellt. Die [2+2]-Cycloaddition an Acrylsäurederivate wurde angewandt für einen Einstieg zur Totalsynthese des Oleander Scale Pheromons. Im zweiten Teil der Arbeit wird die Synthese hormonell aktiver Cholesterinderivate dargestellt. Ausgehend von kommerziell erhältlichen Substanzen wurden verschiedene Substituenten in das Steroidgerüst eingeführt.
|
46 |
Catalytic production and esterification of aqueous solution of lactic acid / Production et estérification catalytiques de solutions aqueuses d’acide lactiqueNguyen, Van Chuc 17 July 2017 (has links)
Cette thèse porte sur la production d'acide lactique par conversion de la biomasse lignocellulosique catalysée par des acides de Lewis solides dans l'eau puis l'estérification d'acide lactique aqueux avec de l'éthanol. La conversion de la cellulose est étudiée en autoclave, en utilisant comme catalyseurs, de la zircone et de l'alumine contenant du W ou Sn (ZrW, AlSn) et différents hydroxydes métalliques. L'étude de la conversion de la cellulose en acide lactique en présence de ZrW non calcinée, ZrW calcinée, Zr(OH)4 et ZrO2, montre que la phase active du catalyseur est constituée de Zr4+, les centres acides de Lewis et de groupes hydroxyles. Les performances catalytiques des catalyseurs AlSn, préparés à partir de chlorure d'étain comme précurseur, dépendent fortement de la présence résiduelle de chlorure, ce qui favorise la formation d'acide lévulinique. Les hydroxydes de certains métaux de transition se sont révélés être des catalyseurs solides efficaces pour la conversion de la cellulose en acide lactique. Il a été observé que le rendement en acide lactique dépend de la concentration et de la basicité des groupes OH superficiels des hydroxydes de métaux de transition et de la présence de sites acides de Lewis. L'estérification de l'acide lactique, à différentes concentrations en l'eau, a été étudiée en présence d'Amberlyst 15, de charbon sulfoné et d'oxyde de graphène pour étudier l'activité et la tolérance à l'eau de catalyseurs solides acides à base de carbone. Il est montré, par calorimétrie d'adsorption d'ammoniac, que l'oxyde de graphène présente des sites superacides et qu'il conduit à la plus grande activité et tolérance à l'eau. L'augmentation de la teneur en eau montre un fort effet inhibiteur sur l'activité du charbon sulfoné alors que d'Amberlyst 15 et l'oxyde de graphène sont plus tolérants. Les catalyseurs ne sont pas stables dans des conditions d'estérification, en présence d'eau / This thesis reports the synthesis of lactic acid from lignocellulosic biomass catalyzed by solid Lewis acid catalysts in water and then esterification of aqueous lactic acid solutions with ethanol. The cellulose conversion was tested in autoclave, in hot water, using zirconia and alumina containing W or Sn (ZrW, AlSn) and different solid metal hydroxides. The conversion of cellulose to lactic acid using uncalcined ZrW, calcined ZrW, Zr(OH)4 and ZrO2 shows that the active surface of the catalyst consists of Zr4+ Lewis centers and OH groups. The catalytic performances of AlSn catalysts, prepared from Sn chloride as precursors, strongly depend on the residual amount of chloride which favors the formation of levulinic acid. Some hydroxides of transition metals were disclosed as efficient solid catalysts for the conversion of cellulose to lactic acid. The yield of lactic acid was observed to depend on the concentration and the basicity of the superficial OH groups and on the presence of Lewis acid sites. The esterification of lactic acid, at different concentrations in water, was studied using Amberlyst 15, sulfonated carbon and graphene oxide to evaluate the activities and water tolerance of carbon based solid catalysts. Graphene oxide, shown by calorimetry of NH3 adsorption to exhibit super-acid sites, leads the highest activity and water tolerance. Increasing amounts of water has a strong inhibiting effect on the activity of sulfonated carbon and less influence on activity of Amberlyst 15 and graphene oxide. However, all catalysts were not stable in esterification conditions, in presence of water
|
47 |
Mechanistic studies of azolium ions and their role in organocatalysisCollett, Christopher J. January 2013 (has links)
This thesis describes our physical organic and mechanistic investigations into N Heterocyclic Carbene (NHC) mediated organocatalytic transformations, through a collaboration with the research group of Dr AnnMarie O'Donoghue and PhD student Richard Massey at Durham University. Initial research focused upon the determination of kinetic acidities and associated pKₐ values for a range of triazolium salts using C(3) H/D exchange, monitored by ¹H NMR spectroscopy. Estimates for pKₐ values in the range 16.6 17.4 were obtained, which are some ~2 and ~3 5 pK units lower than analogous imidazolium and thiazolium species respectively, with modest N substituent (0.3 pK units) effects observed. At lower pD values, an altered pD dependence indicates a dicationic triazolium species is formed (through N(1) protonation) with an estimated pKₐᴺ¹ of -0.2-0.5 and C(3) H pKₐ values at least 2 units lower than their monocationic analogues. This methodology was subsequently extended to mesoionic NHCs, where pKa values of 23.0 27.1 for a range of triazolium and 30.2 31.0 for a range of imidazolium salts were estimated. A detailed study of the NHC catalysed intramolecular Stetter reaction was also undertaken using ¹H NMR spectroscopy. A range of 3 (hydroxybenzyl)azolium salts (adducts), formed from the addition of NHC to aldehyde were isolated, enabling the generation of reaction profiles and the determination of rate constants. The reaction proceeds via rapid and reversible adduct generation, followed by rate limiting Breslow intermediate formation, with electron withdrawing N aryl substituents increasing the rate of product formation. Consistent with rate limiting deprotonation, deuterium exchange studies of O methylated adduct analogues found electron withdrawing N-aryl units gave faster exchange. Examination of the equilibrium constants for adduct formation revealed that both in the case of NHCs bearing 2,6 disubstituted N aryl units and aldehydes bearing a 2 ether substituent, the equilibrium position is significantly shifted towards adduct. Finally, studies at sub-stoichiometric NHC concentrations, monitored by HPLC, imply the reaction is first order with respect to NHC precursor, but zero order in aldehyde, again indicative of rate limiting deprotonation.
|
48 |
Amorphes Aluminiumchlorofluorid und -bromofluorid - die stärksten bekannten festen Lewis-SäurenKrahl, Thoralf 04 November 2005 (has links)
Die feste nichtkristalline Lewis-Säure Aluminiumchlorofluorid (ACF, AlCl(x)F(3-x), x = 0.05 .. 0.3) hat die höchste bisher bekannte Lewis-Acidität aller heterogenen Katalysatoren. Sie erreicht die Stärke von Antimonpentafluorid SbF5 und übertrifft sie in manchen Fällen sogar. In dieser Arbeit wurden die Bulk-Struktur des ACF und der sehr ähnlichen Verbindung Aluminiumbromofluorid (ABF) mittels IR-, ESR-, NMR- und Röntgenabsorptionsspektroskopie studiert. Die Oberfläche der Verbindungen wurde durch die Adsorption von Gasen bei niedrigen Temperaturen untersucht, sowie durch IR- und ESR-Spektroskopie adsorbierter Sondenmoleküle. Das thermische Verhalten dieser nichtkristallinen Verbindungen wurde mittels DTA verfolgt. Die Lewis-Acidität kleiner Modellverbindungen wurde NMR-spektroskopisch und mit ab initio Methoden untersucht. Alle Daten wurden mit denen der gut charakterisierten und bekannten Modifikationen des Aluminiumfluorids (AlF3) verglichen. Die kombinierten Ergebnisse der Messungen an beiden festen Phasen erlauben die Entwicklung eines Strukturmodells für diese Verbindungen, das die meisten spektroskopischen Daten und die außergewöhnlich hohe Lewis-Acidität erklären kann. Beide Phasen sind sehr ähnlich zueinander. Das Vorhandensein des schwereren Halogens (Cl, Br) erzeugt eine Störung des Netzwerkes und verhindert die Ausbildung geordneter Strukturen. Der Grad der Unordnung in diesen Phasen ist höher als bei allen anderen Verbindungen des Aluminiumfluorids. Daraus resultiert eine gestörte Oberfläche, was wiederum zu koordinativ ungesättigtem Aluminium an der Oberfläche führt. Die sauren Zentren in ACF und ABF sind stärker als in anderen aluminiumhaltigen Lewis-Säuren. / The solid non-crystalline Lewis acid aluminum chlorofluoride (ACF, AlCl(x)F(3-x), x = 0.05 .. 0.3) has the highest Lewis acidity of any heterogeneous catalyst known so far. It reaches the acidity of antimony pentafluoride (SbF5) and in some cases even exceeds it. In this work the bulk structure of ACF and of the very similar compound aluminium bromofluoride (ABF) was studied by IR, ESR, NMR, and X-ray absorption spectroscopy. The surface of the compounds was investigated by adsorption of gases at low temperatures, as well as by IR and ESR spectroscopy of adsorbed probe molecules. The thermal behavior of these non-crystalline compounds was followed by DTA. The Lewis acidity of small model compounds was studied by NMR spectroscopy and ab initio calculations. All data were compared to those of well characterized known samples of the different modifications of aluminum fluoride (AlF3). The combined results of the measurements of both solid phases allow to set up a structure model for these compounds which can explain most of the spectrocopic data and the extraordinary high Lewis acidity. Both phases are very similar to each other. The occurrence of the heavier halogen (Cl, Br) causes a perturbation of the network and prevents it from forming ordered structures. The degree of disorder of these phases is higher than for any other known compounds of aluminum fluoride. This results in an disordered surface which leads to coordinatively unsaturated aluminum at the surface. The acidic centers of ACF and ABF are stronger than in any other aluminum containing Lewis acid.
|
49 |
Electronic properties study on hydrazines and nitriles complexed by Lewis acids. Towards chemical hydrogen storage. / Étude des propriétés électroniques des hydrazines et nitriles complexés par des acides de Lewis. Vers le stockage chimique d'hydrogène.Torres Escalona, Javier 27 November 2017 (has links)
Dans la problématique de l'utilisation de nouvelles énergies non polluantes, l'hydrogène est l'un des principaux carburants verts du futur. Les dérivés d'hydrazine et de borane sont potentiellement intéressants pour le stockage chimique de l'hydrogène. Les complexes entre hydrazines ou nitriles avec des boranes ou des alanes sont à la base de cette étude. Ces composés ont été synthétisés afin d'étudier leur structure électronique avant et après la création de la liaison entre les acides et les bases de Lewis. La spectroscopie photoélectronique à rayonnement UV (UV-SPE) est utilisée comme outil principal de caractérisation fournissant des énergies d'ionisation (IE). L’interprétation des résultats expérimentaux est supportée par des calculs quantiques comme ΔSCF + TD-DFT, OVGF, P3 et SAC-CI. Des simulations et des expériences par Flash Vacuum Thermolysis (FVT) ont été effectuées, portant sur l’élimination d'hydrogène à partir de dérivés d'hydrazine borane. / Within the problematic of the use of new non-polluting energies, hydrogen is one of the main green fuels of the future. Hydrazine borane derivatives are potentially interesting chemical hydrogen storage materials. Complexes between hydrazines or nitriles with boranes or alanes are the basis of this study. These compounds were synthesized in order to study their electronic structure before and after creation of the bond between the Lewis acids and bases. Ultraviolet Photoelectron Spectroscopy (UV-PES) is used as a main characterization tool, providing Ionization Energies (IE). The interpretation of the experimental results is supported by Quantum Chemical Calculations as ΔSCF+TD-DFT, OVGF, P3 and SAC-CI methods. Simulations and experiments by Flash Vacuum Thermolysis (FVT) were carried out on hydrogen release from hydrazine borane derivatives.
|
50 |
Triarylborane Functionalized Dicyanovinyl and Acetylacetone Based Molecular Platforms : Building Blocks for Multiple Anion Sensors and Efficient Phosphorescence EmittersRajendra Kumar, G January 2016 (has links) (PDF)
Triarylborane Functionalized Dicyanovinyl and Acetylacetone Based Molecular Platforms:
Building Blocks for Multiple Anion Sensors and Efficient Phosphorescence Emitters
The main objective of this thesis is to design a simple strategy for triarylborane based multiple anion sensors and development of triarylborane incorporated phosphorescent metal complexes. The thesis consists of eight chapters and the contents of each chapter are given below.
Chapter 1
This chapter gives a general introduction to recent advances relevant to the theme of the thesis. A review of the fundamental characteristics of triarylboranes and their applications in various fields such as chemical sensors and optoelectronics is presented. Advances in boron chemistry in the areas such as anion sensors, solid state emissive and phosphorescence materials are discussed in detail. The scope of the thesis is outlined at the end of the chapter.
Chapter 2
The second chapter deals with the general experimental techniques and synthetic procedures followed in this thesis.
Chapter 3
This chapter deals with a rational design strategy for differential identification of fluoride and cyanide ions using TAB based sensors. In general, most of the triarylboranes give similar optical responses towards fluoride and cyanide ions as they follow similar sensing mechanism. In order to circumvent this problem, two TAB-DCV conjugates (1 and 2) are designed and synthesised. The DCV unit is highly specific for cyanide ion owing to the presence of electrophilic carbon center. Probes 1 and 2 differ in steric crowding around the boron center. The less crowded boron center in 1 binds with fluoride as well as with cyanide ions giving similar optical response (luminescence is quenched in presence of F¯
and CN¯). In the case of 2, selectivity of boron center towards fluoride is tuned by increasing the steric crowding around the boron unit.
The dicyanovinyl unit acts as selective sensing site for cyanide ions. As a result,
2 gives different fluorogenic response towards the anions F¯ and CN¯ which were considered as interfering anions in TAB based sensor chemistry. Thus, a modular design principle is developed for differential identification of fluoride and cyanide ions using TAB.
Chapter 4
In this chapter, detailed photophysical studies of TAB-amine-DCV conjugates and colorimetric discrimination of fluoride and cyanide ions are discussed. Presence of amine based donor between the two electron deficient sites enhances the electronic conjugation in 3−5. Since there are two different acceptor sites with a common donor, two distinct charge transfer
transition bands are observed in the visible region of electromagnetic spectrum. The absorption and emission spectra of these compounds show pronounced sensitivity to solvent polarity, signifying large excited state dipolmonents. Anion binding studies confirms that these compounds are highly selective towards fluoride and cyanide ions. Fluoride ions selectively interact with boron center and block the corresponding charge transfer transition thereby leading to a distinct colour change which is observable by naked eye. On the other hand, cyanide interacts with boron as well as DCV unit and blocks both the charge transfer transitions which results in disappearance of colour. Hence, compounds 4 and 5 exhibit different colorimetric signals for fluoride and cyanide ions. Since the absorption bands of 3 do not fall in the visible region, it does not show any colorimetric response towards the aforementioned anions. The anion sensing mechanisms are established by 1H, and 19F NMR studies.
Chapter 5
This chapter presents a systematic study of the effect of length of π-electronic conjugation on the optical properties and anion sensing abilities of a series of TAB-oligothiophene-DCV conjugates (6−8). Their absorption as well as emission bands undergo redshift upon increasing the number of thiophene units between TAB and DCV units as the π-electronic
conjugation in 6−8 is greatly dependent on the number of thiophene units. Their fluorescence emission is highly sensitive to solvent polarity. In the case of 6, the emission band undergoes a redshift with reduced intensity. In the case of 7 the emission band undergoes a redshift but the intensity is not affected by solvent polarity. In the case of 8, the emission band undergoes redshift with enhanced intensity in polar solvents. Interestingly, 7 and
8 show solvent viscosity dependent fluorescence. Structural reorganisation is restricted in viscous medium and results in enhanced emission for 7 and 8. Further, these compounds exhibit selective response towards the fluoride and cyanide ions with different colorimetric responses. Test strips made up of probes 7 and 8 have potential application in identifying fluoride and cyanide ions in aqueous medium.
Chapter 6
This chapter describes synthesis and optical characterisation of triarylborane incorporated
acetylacetone (acacH) ligands (9, 10) and their borondifluoride complexes (11, 12). AcacH ligands and BF2 complexes show solvent dependent emission phenomena due to the involvement of charge transfer transition. Their optical properties are highly dependent on molecular conformations. Complex with duryl spacer
(12) exhibits more red shifted emission in polar solvents due to the enhanced charge transfer transition facilitated by twisted rigid geometry. In presence of fluoride and cyanide ions, the borondifluoride complexes are not stable. The anions concomitantly interact with tricoordinate boron as well as acac-BF2 unit to give rise to complex
pattern of photoluminescence spectral changes during the titration experiment. The binding pathway and the possible species involved are established with the help of 1H, 19F and 11B NMR spectral studies in presence of the anions. Complexes 11 and 12 act as selective chemodosimetric sensors for fluoride and cyanide ions.
Chapter 7
In this chapter, the synthesis and optical
characterisations of triarylborane
conjugated cyclometalated platinum complexes are discussed. A series of square planar platinum complexes are synthesised with different cyclometalating ligands. Complexes (13−18) exhibit a range of luminescence from green to red in solution as well as in the solid state. Their emission intensities are highly sensitive towards atmospheric oxygen suggesting that they originate from a triplet excited state. A maximum of 85% quantum yield is observed for complex 15 in solution state while complex 14 showed a maximum of 58% quantum yield in solid state. Complexes with rigid molecular conformation (14, 16 and 18) showed higher luminescence quantum yield than those having phenyl spacer (13, 15 and 17). The sterically encumbered boryl (-BMes2) group significantly reduces π-π stacking between the square planar entities. Thus, complexes 13−18 show bright luminescence in solid state compared to model complexes without boryl group. The effect of Lewis acidic boron center on luminescence behaviour is explored by fluoride binding studies.
Chapter 8
This chapter is divided into two parts. Part-I describes the synthesis and optical characterisation of triarylborane conjugated cyclometalated iridium complexes (19−24). They are brightly luminescent in solution state with high sensitivity towards atmospheric oxygen. Complex 20 shows a highest quantum yield of 91%. Interestingly, under ambient atmospheric conditions, they exhibit a rare type of dual emission. Life time data suggest that the lower energy emission band originates from cyclometalated iridium based triplet excited state while higher energy emission band originates from boryl ased singlet excited state. Fluoride binding at the boron site results in luminescence quenching; evidently, tri-coordinate boron has a major contribution to the luminescence features of these iridium complexes. Part-II deals with synthesis of triarylborane conjugated pyrazole ligand (25) and its binuclear iridium complexes (26−28) in which two iridium centers are bridged by hydroxo as well as pyrazolato ligands. These binuclear iridium complexes exhibit higher luminescence quantum yield than TAB-acac-Iridium complexes (mononuclear complexes; part I). Binding of fluoride ions at the boron center has a minor impact on their luminescence nature. High sensitivity of their luminescence towards atmospheric oxygen indicates the involvement of triplet excited state in their emission process.
|
Page generated in 0.0431 seconds