The formation of surface films on electrodes in contact with non-aqueous electrolytes in lithium-ion batteries has a vital impact on battery performance. A basic understanding of such films is essential to the development of next-generation power sources. The surface chemistry, morphology and thermal stability of two typical anode and cathode materials, graphite and LiNi0.8Co0.2O2, have here been evaluated by X-ray photoelectron spectroscopy (XPS), X-ray diffraction, scanning electron microscopy and differential scanning calorimetry, and placed in relation to the electrochemical performance of the electrodes. Chemical and morphological information on electrochemically formed graphite surface films has been obtained accurately by combining XPS measurements with Ar+ ion etching. An improved picture of the spatial organisation, including thickness determination of the surface film and characterisation of individual component species, has been established by a novel sputtering calibration procedure. The stability of the surface films has been shown to depend strongly on temperature and choice of lithium salt. Decomposition products from elevated-temperature storage in different electrolyte systems were identified and coupled to effects such as capacity loss and increase in electrode resistance. Different decomposition mechanisms are proposed for surface films formed in electrolytes containing LiBF4, LiPF6, LiN(SO2CF3)2 and LiCF3SO3 salts. Surface film formation due to electrolyte decomposition has been confirmed on LiNi0.8Co0.2O2 positive electrodes. An overall surface-layer increase with temperature has been identified and provides an explanation for the impedance increase the material experiences on elevated-temperature storage. Surface phenomena are clearly major factors to consider in selecting materials for practical Li-ion batteries.

Demands for high energy-density batteries have sharpened with the increased use of portable electronic devices, as has the focus global warming is now placing on the need for electric and electric-hybrid vehicles. Li-ion battery technology is superior to other rechargeable battery technologies in both energy- and power-density. A remaining challenge, however, is to find an alternative candidate to graphite as the commercial anode. Several metals can store more lithium than graphite, e.g., Al, Sn, Si and Sb. The main problem is the large volume changes that these metals undergo during the lithiation process, leading to degradation and pulverization of the anode with resulting limitations in cycle-life. The Li-ion battery is studied in this thesis with the goal of better understanding the critical parameters determining high and stable electrochemical performance when using a metal or a metal-alloy anode. Various antimony-containing systems will be presented. These represent different routes to circumvent the problems caused by volume change. Sb-compounds exhibit a high lithium storage capability. At most, three Li-ions can be stored per Sb atom, leading to a theoretical gravimetric capacity of 660 mAh/g. Model systems with stepwise increasing complexity have been designed to better understand the factors influencing lithium insertion/extraction. It is demonstrated that the microstructure of the anode material is crucial to stable cycling performance and high reversibility. The relative importance of the various factors controlling stability, such as particle-size, oxide content and morphology, varies strongly with the type of system studied. The cycling performance of pure Sb is improved dramatically by incorporating a second component, Sb2O3. With a critical oxide concentration of ~25%, a stable capacity close to the theoretical value of 770 mAh/g is obtained for over 50 cycles. Cu2Sb shows stable cycling performance in the absence of oxide. Cu9Sb2 has been presented for the first time as an anode material in a Li-ion battery context. Studies of the Solid Electrolyte Interphase (SEI) formed on AlSb composite electrodes show an SEI layer thinner than graphite, and with a clearly dynamic character.

The Lithium-ion (Li-ion) battery is one of the major topics currently studied as a potential way to help in reducing greenhouse gas emissions. Major car manufacturers are interested in adapting the Li-ion battery in the power trains of Plug-in Hybrid Electric Vehicles (PHEV) to improve fuel efficiency. Materials currently used for Li-ion batteries are LiCoO2 (LCO) and graphite—the first materials successfully integrated by Sony into Li-ion batteries. However, due to the high cost and polluting effect of cobalt (Co), and the low volumetric capacity of graphite, new materials are being sought out. LiFePO4 (LFP) and SnO2 are both good alternatives for the cathode and anode materials in Li-ion batteries. But, to create high-performance batteries, nano-sized carbon-coated particles of LFP and SnO2 are required. The present work attempts to develop a new synthesis method for these materials: organic template-assisted synthesis for three-dimensionally ordered macroporous (3DOM) LFP and porous SnO2. With the newly developed synthesis, highly pure materials were successfully synthesized and tested in Li-ion batteries. The obtained capacity for LFP was 158m Ah/g, which is equivalent to 93% of the theoretical capacity. The obtained capacity for SnO2 was 700 mAh/g, which is equivalent to 90% of the theoretical capacity. Moreover, Hybrid Pulse Power Characterization (HPPC) was used to test LFP and LCO for comparison and feasibility in PHEVs. HPPC is generally used to test the feasibility and capacity fade for PHEVs. It simulates battery use in various driving conditions of PHEVs to study pulse energy consumption and regeneration. In this case, HPPC was conducted on a half-cell battery for the first time to study the phenomena on a single active material, LFP or LCO. Based on the HPPC results, LFP proved to be more practical for use in PHEVs.

Increasing pressure from environmental, political and economic sources are driving the development of an electric vehicle powertrain. The advent of hybrid electric vehicles (HEVs), plug-in hybrid electric vehicles (PHEVs), and battery electric vehicles (BEVs) bring significant technological and design challenges. The success of electric vehicle powertrains depends heavily on the robustness and longevity of the on-board energy storage system or battery. Currently, lithium-ion batteries are the most suitable technology for use in electrified vehicles. The majority of literature and commercially available battery performance data assumes a working environment that is at room temperature. However, an electrified vehicle battery will need to perform under a wide range of temperatures, including the extreme cold and hot environments. Battery performance changes significantly with temperature, so the effects of extreme temperature operation must be understood and accounted for in electrified vehicle design. In order to meet the aggressive development schedules of the automotive industry, electrified powertrain models are often employed. The development of a temperature-dependent battery model with an accompanying vehicle model would greatly enable model based design and rapid prototyping efforts. This paper empirically determines the performance characteristics of an A123 lithium iron-phosphate battery, re-parameterizes the battery model of a vehicle powertrain model, and estimates the electric range of the modeled vehicle at various temperatures. The battery and vehicle models will allow future development of cold-weather operational strategies. As expected the vehicle range is found to be far lower with a cold battery back. This effect is seen to be much more pronounced in the aggressive US06 drive cycle where the all-electric range was found to be 44% lower at -20°C than at 25°C. Also it was found that there was minimal impact of temperature on range above 25°C

The Lithium-ion (Li-ion) battery is one of the major topics currently studied as a potential way to help in reducing greenhouse gas emissions. Major car manufacturers are interested in adapting the Li-ion battery in the power trains of Plug-in Hybrid Electric Vehicles (PHEV) to improve fuel efficiency. Materials currently used for Li-ion batteries are LiCoO2 (LCO) and graphite—the first materials successfully integrated by Sony into Li-ion batteries. However, due to the high cost and polluting effect of cobalt (Co), and the low volumetric capacity of graphite, new materials are being sought out. LiFePO4 (LFP) and SnO2 are both good alternatives for the cathode and anode materials in Li-ion batteries. But, to create high-performance batteries, nano-sized carbon-coated particles of LFP and SnO2 are required. The present work attempts to develop a new synthesis method for these materials: organic template-assisted synthesis for three-dimensionally ordered macroporous (3DOM) LFP and porous SnO2. With the newly developed synthesis, highly pure materials were successfully synthesized and tested in Li-ion batteries. The obtained capacity for LFP was 158m Ah/g, which is equivalent to 93% of the theoretical capacity. The obtained capacity for SnO2 was 700 mAh/g, which is equivalent to 90% of the theoretical capacity. Moreover, Hybrid Pulse Power Characterization (HPPC) was used to test LFP and LCO for comparison and feasibility in PHEVs. HPPC is generally used to test the feasibility and capacity fade for PHEVs. It simulates battery use in various driving conditions of PHEVs to study pulse energy consumption and regeneration. In this case, HPPC was conducted on a half-cell battery for the first time to study the phenomena on a single active material, LFP or LCO. Based on the HPPC results, LFP proved to be more practical for use in PHEVs.

In this thesis, a number of clean-energy materials for hydrogen generation, hydrogen storage, and Li-ion battery energy storage applications have been investigated through state-of-the-art density functional theory. As an alternative fuel, hydrogen has been regarded as one of the promising clean energies with the advantage of abundance (generated through water splitting) and pollution-free emission if used in fuel cell systems. However, some key problems such as finding efficient ways to produce and store hydrogen have been hindering the realization of the hydrogen economy. Here from the scientific perspective, various materials including the nanostructures and the bulk hydrides have been examined in terms of their crystal and electronic structures, energetics, and different properties for hydrogen generation or hydrogen storage applications. In the study of chemisorbed graphene-based nanostructures, the N, O-N and N-N decorated ones are designed to work as promising electron mediators in Z-scheme photocatalytic hydrogen production. Graphene nanofibres (especially the helical type) are found to be good catalysts for hydrogen desorption from NaAlH4. The milestone nanomaterial, C60, is found to be able to significantly improve the hydrogen release from the (LiH+NH3) mixture. In addition, the energetics analysis of hydrazine borane and its derivative solid have revealed the underlying reasons for their excellent hydrogen storage properties.  As the other technical trend of replacing fossil fuels in electrical vehicles, the Li-ion battery technology for energy storage depends greatly on the development of electrode materials. In this thesis, the pure NiTiH and its various metal-doped hydrides have been studied as Li-ion battery anode materials. The Li-doped NiTiH is found to be the best candidate and the Fe, Mn, or Cr-doped material follows. / <p>QC 20130925</p>

This research proposes a method for estimating the residual capacity of Li-ion batteries. The charging and discharging characteristics of Li-ion batteries are investigated and analyzed by a battery test system. The measurement of the initial capacity is based on the improved open-circuit voltage measurement, which compensates the effects of battery aging and self-discharging. The measurement of the used capacity is based on the improved coulomb counting measurement, which compensates the effects of output current and environmental temperature. The designed system provides various functions for battery charging and discharging, battery voltage measuring and recording, battery capacity estimation and calculation, and the log files can be used for further battery characteristics analysis.

Environmental and economic reasons have lead automotive companies towards the direction of EVs and HEVs. Stricter emission legislations along with the consumer needs for more cost-efficient and environmental friendly vehicles have increased immensely the amount of hybrid and electric vehicles available in the market. It is essential though for Li-ion batteries, the main propulsion force of EVs and HEVs, to be able to read the battery characteristics in a high accuracy manner, predict life expectancy and behaviour and act accordingly. The following thesis constitutes a concept study of a battery diagnostics method. The method is based on the notion of a pseudo-random binary signal used as the current input and from its voltage response, the impedance is used for the estimation of parameters such as the state of charge and more. The feasibility of the PRBS method at a battery cell has been examined through various tests, both in an experimental manner at the lab but also in a simulation manner. The method is compared for validation against the electrochemical impedance spectroscopy method which is being used as a reference. For both the experimental and the simulation examinations, the PRBS method has been validated and proven to work. No matter the change in the parameters of the system, the method behaves in a similar manner as in the reference EIS method. The level of detail in the research and the performed experiments is what makes the significance of the results of high importance. The method in all ways has been proven to work in the concept study and based on the findings, if implemented on an EV’s or HEV’s electric drive line and the same functionality is observed, be used as a diagnostics method of the battery of the vehicle.

The improvement of volumetric energy density remains a key area of research to opti-mize Li-ion batteries for applications such as extending the range of electric vehicles. There is still improvement to be made in the energy density in the positive elec-trode materials. The current thesis deals with determining the phase diagrams of the Li-Mn-Ni-O and Li-Co-Mn-O systems in order to better understand the structures and the electrochemistry of these materials. The phase diagrams were made through careful analysis of hundreds of X-ray di raction patterns taken of milligram-scale combinatorial samples. A number of bulk samples were also investigated. The Li-Mn-Ni-O system is of particular interest as avoiding cobalt lowers the cost of the material. However, this system is very complex: there are two large solid-solution regions separated by three two-phase regions as well as two three-phase regions. Comparing quenched and slow cooled samples shows that the system trans-form dramatically when cooled at rates typically used to make commercial materials. The consequences of these results are that much of the system must be avoided in order to guarantee that the materials remain single phase during cooling. This work should therefore impact signi cantly researchers working on composite electrodes. Two new structures were found. The first was Li-Ni-Mn oxide rocksalt structures with vacancies and ordering of manganese which were previously mistakenly identi ed as LixNi2xO2. The other new structure was a layered oxide with metal site vacancies allowing manganese to order on two superlattices. The electrochemistry of both these materials is presented here. Finally, the region where layered-layered composites form during cooling has been determined. These materials were long looked for along the composition line from Li2MnO3 to LiNi0.5Mn0.5O2 and the most significant consequence of the actual locations of the end-members is that one of the structures contains a high concentration of nickel on the lithium layer. Layered-layered nano-composites formed in this system are therefore not ideal positive electrode materials and it will be demonstrated that single-phase layered materials lead to better electrochemistry.

L'utilisation d'un électrolyte aqueux pour la technologie Li-ion devrait permettre des performances en termes de puissance et de coût tout en garantissant une sécurité de fonctionnement et un impact neutre vis-à-vis de l'environnement. Cette technologie utilise des composés d'insertion du lithium fonctionnant habituellement en milieu organique dont le choix doit être adapté à un électrolyte aqueux, présentant une fenêtre de stabilité électrochimique réduite. Le travail de thèse porte dans un premier temps sur la sélection des différents éléments constituant un accumulateur Li-ion aqueux: choix de l'électrolyte, des collecteurs de courant, des liants d'électrode et des matériaux d'électrode. Les performances électrochimiques en milieu aqueux de différents composés d'insertion du lithium ont été évaluées. Afin d'augmenter la fenêtre de stabilité électrochimique de l'électrolyte aqueux, la passivation des électrodes par réduction de sels de diazonium a été réalisée. L'influence de la nature des sels de diazonium et de l'épaisseur des films sur les performances électrochimiques des électrodes a été évaluée par diverses techniques, voltampérométrie et impédance électrochimique. Les résultats obtenus montrent l'impact positif des dépôts obtenus vis-à-vis de l'augmentation de la surtension de réduction de l'eau. Ces travaux ouvrent la voie à des perspectives prometteuses sur cette technologie Li-Ion aqueuse.