In this work, we present a new method for seismic waveform characterization, which is aimed at extracting detailed litho-stratigraphical information from seismic data. We attempt to estimate the lithological attributes from seismic data according to our parametric representation of stratigraphical horizons, where the parameter values provide us with a direct link to nature of lithological transitions. We test our method on a seismic dataset with a strong diagenetic transition (opal-A to opal-CT transition). Given some information from cutting samples of well, we use a percolation-based model to construct the elastic profile of lithological transitions. Our goal is to match parametric representation for the diagenetic transition in both real data and synthetic data given by these elastic profiles. This match may be interpreted as a well-seismic tie, which reveals lithological information about stratigraphical horizons.

In this work, we present a new method for seismic waveform characterization, which is aimed at extracting detailed litho-stratigraphical information from seismic data. We attempt to estimate the lithological attributes from seismic data according to our parametric representation of stratigraphical horizons, where the parameter values provide us with a direct link to nature of lithological transitions. We test our method on a seismic dataset with a strong diagenetic transition (opal-A to opal-CT transition). Given some information from cutting samples of well, we use a percolation-based model to construct the elastic profile of lithological transitions. Our goal is to match parametric representation for the diagenetic transition in both real data and synthetic data given by these elastic profiles. This match may be interpreted as a well-seismic tie, which reveals lithological information about stratigraphical horizons.

In this work, we present a new method for seismic waveform characterization, which is aimed at extracting detailed litho-stratigraphical information from seismic data. We attempt to estimate the lithological attributes from seismic data according to our parametric representation of stratigraphical horizons, where the parameter values provide us with a direct link to nature of lithological transitions. We test our method on a seismic dataset with a strong diagenetic transition (opal-A to opal-CT transition). Given some information from cutting samples of well, we use a percolation-based model to construct the elastic profile of lithological transitions. Our goal is to match parametric representation for the diagenetic transition in both real data and synthetic data given by these elastic profiles. This match may be interpreted as a well-seismic tie, which reveals lithological information about stratigraphical horizons. / Science, Faculty of / Earth, Ocean and Atmospheric Sciences, Department of / Graduate

No description available.

No description available.

Um método para a detecção automática de tipos litológicos e contato entre camadas foi desenvolvido através de uma combinação de análise estatística de um conjunto de perfis geofísicos de poços convencionais, calibrado por descrições sistemáticas de testemunhos. O objetivo deste projeto é permitir a integração de dados de rocha em modelos de reservatório. Os testemunhos são descritos com o suporte de um sistema de nomenclatura baseado em ontologias que formaliza extensamente uma grande gama de atributos de rocha. As descrições são armazenadas em um banco de dados relacional junto com dados de perfis de poço convencionais de cada poço analisado. Esta estrutura permite definir protótipos de valores de perfil combinados para cada litologia reconhecida através do cálculo de média e dos valores de variância e covariância dos valores medidos por cada ferramenta de perfilagem para cada litologia descrita nos testemunhos. O algoritmo estatístico é capaz de aprender com cada novo testemunho e valor de log adicionado ao banco de dados, refinando progressivamente a identificação litológica. A detecção de contatos litológicos é realizada através da suavização de cada um dos perfis através da aplicação de duas médias móveis de diferentes tamanhos em cada um dos perfis. Os resultados de cada par de perfis suavizados são comparados, e as posições onde as linhas se cruzam definem profundidades onde ocorrem mudanças bruscas no valor do perfil, indicando uma potencial mudança de litologia. Os resultados da aplicação desse método em cada um dos perfis são então unificados em uma única avaliação de limites litológicos Os valores de média e variância-covariância derivados da correlação entre testemunhos e perfis são então utilizados na construção de uma distribuição gaussiana n-dimensional para cada uma das litologias reconhecidas. Neste ponto, probabilidades a priori também são calculadas para cada litologia. Estas distribuições são comparadas contra cada um dos intervalos litológicos previamente detectados por meio de uma função densidade de probabilidade, avaliando o quão perto o intervalo está de cada litologia e permitindo a atribuição de um tipo litológico para cada intervalo. O método desenvolvido foi testado em um grupo de poços da bacia de Sergipe- Alagoas, e a precisão da predição atingida durante os testes mostra-se superior a algoritmos clássicos de reconhecimento de padrões como redes neurais e classificadores KNN. O método desenvolvido foi então combinado com estes métodos clássicos em um sistema multi-agentes. Os resultados mostram um potencial significante para aplicação operacional efetiva na construção de modelos geológicos para a exploração e desenvolvimento de áreas com grande volume de dados de perfil e intervalos testemunhados. / A method for the automatic detection of lithological types and layer contacts was developed through the combined statistical analysis of a suite of conventional wireline logs, calibrated by the systematic description of cores. The intent of this project is to allow the integration of rock data into reservoir models. The cores are described with support of an ontology-based nomenclature system that extensively formalizes a large set of attributes of the rocks, including lithology, texture, primary and diagenetic composition and depositional, diagenetic and deformational structures. The descriptions are stored in a relational database along with the records of conventional wireline logs (gamma ray, resistivity, density, neutrons, sonic) of each analyzed well. This structure allows defining prototypes of combined log values for each lithology recognized, by calculating the mean and the variance-covariance values measured by each log tool for each of the lithologies described in the cores. The statistical algorithm is able to learn with each addition of described and logged core interval, in order to progressively refine the automatic lithological identification. The detection of lithological contacts is performed through the smoothing of each of the logs by the application of two moving means with different window sizes. The results of each pair of smoothed logs are compared, and the places where the lines cross define the locations where there are abrupt shifts in the values of each log, therefore potentially indicating a change of lithology. The results from applying this method to each log are then unified in a single assessment of lithological boundaries The mean and variance-covariance data derived from the core samples is then used to build an n-dimensional gaussian distribution for each of the lithologies recognized. At this point, Bayesian priors are also calculated for each lithology. These distributions are checked against each of the previously detected lithological intervals by means of a probability density function, evaluating how close the interval is to each lithology prototype and allowing the assignment of a lithological type to each interval. The developed method was tested in a set of wells in the Sergipe-Alagoas basin and the prediction accuracy achieved during testing is superior to classic pattern recognition methods such as neural networks and KNN classifiers. The method was then combined with neural networks and KNN classifiers into a multi-agent system. The results show significant potential for effective operational application to the construction of geological models for the exploration and development of areas with large volume of conventional wireline log data and representative cored intervals.

In this paper, we design and develop a new software tool that helps automatic lithofacies segmentation from geological data. Lithofacies is a crucial problem in reservoir characterization, and our study intends to prove that soft computing techniques like Wavelet transform modulus maxima lines (WTMM) and Detrended fluctuation analysis (DFA) approaches allow a geological lithology segmentation from differed well logging. On one hand, WTMM proves to be useful for delimitation of each layer. We based on its sensitivity on the presence of more than one layer, On the other hand, DFA is used to enhance the estimation if the roughness coefficient of each lithology. We use them jointly to segment the lithofacies of boreholes located in the Algerian Sahara. Obtained results are encouraging to publish this method, because the principal benefit is economic.

<p>Sandstone and shale samples were selected within the systems tracts for laboratory analyses. The sidewall and core samples were subjected to petrographic thin section analysis, mineralogical analyses which include x-ray diffraction (XRD), scanning electron microscopy (SEM), energy dispersive spectroscopy (EDS), and stable carbon and oxygen isotopes geochemistry to determine the diagenetic alteration at deposition and post deposition in the basin. The shale samples were subjected to Rock-Eval pyrolysis and accelerated solvent extraction (ASE) prior to gas chromatographic (GC) and gas chromatographic-mass spectrometric (GC-MS) analyses of the rock extracts, in order to determine the provenance, type and thermal maturity of organic matter present in sediments of the Orange Basin. The results revealed a complex diagenetic history of sandstones in this basin, which includes compaction, cementation/micritization, dissolution, silicification/overgrowth of quartz, and fracturing. The Eh-pH shows that the cements in the area of the basin under investigation were precipitated under weak acidic and slightly alkaline conditions. The &delta / 18O isotope values range from -1.648 to 10.054 %, -1.574 to 13.134 %, and -2.644 to 16.180 % in the LST, TST, and HST, respectively. While &delta / 13C isotope values range from -25.667 to -12.44 %, -27.862 to -6.954% and -27.407 to -19.935 % in the LST, TST, and HST, respectively. The plot of &delta / 18O versus &delta / 13C shows that the sediments were deposited in shallow marine temperate conditions.</p>

<p>Sandstone and shale samples were selected within the systems tracts for laboratory analyses. The sidewall and core samples were subjected to petrographic thin section analysis, mineralogical analyses which include x-ray diffraction (XRD), scanning electron microscopy (SEM), energy dispersive spectroscopy (EDS), and stable carbon and oxygen isotopes geochemistry to determine the diagenetic alteration at deposition and post deposition in the basin. The shale samples were subjected to Rock-Eval pyrolysis and accelerated solvent extraction (ASE) prior to gas chromatographic (GC) and gas chromatographic-mass spectrometric (GC-MS) analyses of the rock extracts, in order to determine the provenance, type and thermal maturity of organic matter present in sediments of the Orange Basin. The results revealed a complex diagenetic history of sandstones in this basin, which includes compaction, cementation/micritization, dissolution, silicification/overgrowth of quartz, and fracturing. The Eh-pH shows that the cements in the area of the basin under investigation were precipitated under weak acidic and slightly alkaline conditions. The &delta / 18O isotope values range from -1.648 to 10.054 %, -1.574 to 13.134 %, and -2.644 to 16.180 % in the LST, TST, and HST, respectively. While &delta / 13C isotope values range from -25.667 to -12.44 %, -27.862 to -6.954% and -27.407 to -19.935 % in the LST, TST, and HST, respectively. The plot of &delta / 18O versus &delta / 13C shows that the sediments were deposited in shallow marine temperate conditions.</p>

Um método para a detecção automática de tipos litológicos e contato entre camadas foi desenvolvido através de uma combinação de análise estatística de um conjunto de perfis geofísicos de poços convencionais, calibrado por descrições sistemáticas de testemunhos. O objetivo deste projeto é permitir a integração de dados de rocha em modelos de reservatório. Os testemunhos são descritos com o suporte de um sistema de nomenclatura baseado em ontologias que formaliza extensamente uma grande gama de atributos de rocha. As descrições são armazenadas em um banco de dados relacional junto com dados de perfis de poço convencionais de cada poço analisado. Esta estrutura permite definir protótipos de valores de perfil combinados para cada litologia reconhecida através do cálculo de média e dos valores de variância e covariância dos valores medidos por cada ferramenta de perfilagem para cada litologia descrita nos testemunhos. O algoritmo estatístico é capaz de aprender com cada novo testemunho e valor de log adicionado ao banco de dados, refinando progressivamente a identificação litológica. A detecção de contatos litológicos é realizada através da suavização de cada um dos perfis através da aplicação de duas médias móveis de diferentes tamanhos em cada um dos perfis. Os resultados de cada par de perfis suavizados são comparados, e as posições onde as linhas se cruzam definem profundidades onde ocorrem mudanças bruscas no valor do perfil, indicando uma potencial mudança de litologia. Os resultados da aplicação desse método em cada um dos perfis são então unificados em uma única avaliação de limites litológicos Os valores de média e variância-covariância derivados da correlação entre testemunhos e perfis são então utilizados na construção de uma distribuição gaussiana n-dimensional para cada uma das litologias reconhecidas. Neste ponto, probabilidades a priori também são calculadas para cada litologia. Estas distribuições são comparadas contra cada um dos intervalos litológicos previamente detectados por meio de uma função densidade de probabilidade, avaliando o quão perto o intervalo está de cada litologia e permitindo a atribuição de um tipo litológico para cada intervalo. O método desenvolvido foi testado em um grupo de poços da bacia de Sergipe- Alagoas, e a precisão da predição atingida durante os testes mostra-se superior a algoritmos clássicos de reconhecimento de padrões como redes neurais e classificadores KNN. O método desenvolvido foi então combinado com estes métodos clássicos em um sistema multi-agentes. Os resultados mostram um potencial significante para aplicação operacional efetiva na construção de modelos geológicos para a exploração e desenvolvimento de áreas com grande volume de dados de perfil e intervalos testemunhados. / A method for the automatic detection of lithological types and layer contacts was developed through the combined statistical analysis of a suite of conventional wireline logs, calibrated by the systematic description of cores. The intent of this project is to allow the integration of rock data into reservoir models. The cores are described with support of an ontology-based nomenclature system that extensively formalizes a large set of attributes of the rocks, including lithology, texture, primary and diagenetic composition and depositional, diagenetic and deformational structures. The descriptions are stored in a relational database along with the records of conventional wireline logs (gamma ray, resistivity, density, neutrons, sonic) of each analyzed well. This structure allows defining prototypes of combined log values for each lithology recognized, by calculating the mean and the variance-covariance values measured by each log tool for each of the lithologies described in the cores. The statistical algorithm is able to learn with each addition of described and logged core interval, in order to progressively refine the automatic lithological identification. The detection of lithological contacts is performed through the smoothing of each of the logs by the application of two moving means with different window sizes. The results of each pair of smoothed logs are compared, and the places where the lines cross define the locations where there are abrupt shifts in the values of each log, therefore potentially indicating a change of lithology. The results from applying this method to each log are then unified in a single assessment of lithological boundaries The mean and variance-covariance data derived from the core samples is then used to build an n-dimensional gaussian distribution for each of the lithologies recognized. At this point, Bayesian priors are also calculated for each lithology. These distributions are checked against each of the previously detected lithological intervals by means of a probability density function, evaluating how close the interval is to each lithology prototype and allowing the assignment of a lithological type to each interval. The developed method was tested in a set of wells in the Sergipe-Alagoas basin and the prediction accuracy achieved during testing is superior to classic pattern recognition methods such as neural networks and KNN classifiers. The method was then combined with neural networks and KNN classifiers into a multi-agent system. The results show significant potential for effective operational application to the construction of geological models for the exploration and development of areas with large volume of conventional wireline log data and representative cored intervals.