Both LiCoO2 and LiNi1/3Mn1/3Co1/3O2 layered cathode materials are investigated in our studies. P3 phase of CoO2, the end member of the LixCoO2, is found in both chemically and electrochemically delithiated materials. Delithiated LixCoO2 specimens decompose into fine Co3O4 and LiCoO2 particles starting at around 200 °C. This decomposing reaction is proved by in-situ X-ray diffraction and in-situ transmission electron microscopy investigations. The structures of pristine and cycled LiNi1/3Mn1/3Co1/3O2 are investigated by electron diffraction. Single and polycrystalline crystals are found in this material. The partial substitution of Co by Ni and Mn in LiNi1/3Mn1/3Co1/3O2 opens up the possibility of different cation configurations in the crystal lattice. Both 3Rm symmetry and superlattices are identified in this material. The number of particles with superlattices in pristine material (40%) is much bigger than cycled material at discharge state (10%).

La mémoire Flash est célèbre dans le domaine des mémoires non volatiles ; elle est actuellement extrêmement utilisée pour le stockage des données numériques dans presque tous type d'appareil électronique nomade (ordinateur portable, téléphone mobile, tablette, …). Pour dépasser ses limites actuelles (densité d'informations, rapidité d'accès, endurance), un grand nombre de recherches se développent, explorant notamment le concept de mémoires résistives (Re-RAM), qui repose sur la commutation entre deux états de résistance (ou plus) via l'application d'une tension. Les mémoires Re-RAM dont la variation de résistance dépend de réactions électrochimiques sont potentiellement de bonnes candidates ; les mécanismes d'oxydo-réduction impliqués sont cependant souvent de type filamentaire, mettant notamment en jeu des migrations de cations d’éléments métalliques (provenant des électrodes), ou de lacunes d’oxygène. Ce caractère filamentaire rend difficilement atteignable la miniaturisation extrême, à l’échelle nanométrique.Dans ce but, une classe de matériaux complètement différente -utilisée dans le domaine du stockage d'énergie- est explorée. L’objectif de cette thèse est ainsi d’approfondir l’étude des phénomènes de commutation de résistance observés sur des films de LixCoO2. Nous caractérisons d'abord les propriétés structurales et électriques, à l'échelle nanométrique, de tels films déposés sur divers types de substrats. Nous cherchons ensuite à déterminer les mécanismes électrochimiques à l’origine des modifications : celles-ci vont en effet en sens inverse pour un même signe de tension, selon que l’on se trouve dans la configuration d’un contact nanométrique pointe AFM/film, ou dans la configuration d’un contact micrométrique électrode/film/électrode. Dans la première configuration nous déterminons les réactions électrochimiques impliquées. Dans la deuxième, nous proposons un mécanisme radicalement différent, corroboré par plusieurs résultats convergents. Enfin, nous exposons de premiers résultats prometteurs, relatifs à l’applicabilité potentielle de ces films aux mémoires Re-RAM, et au-delà, aux circuits neuromorphiques (états multiples de résistance – phénomènes d'additivité). / Flash memory has been famous in the field of non-volatile memory; currently it is extremely used for digital data storage in almost type of mobile electronic device (laptop, mobile phone, tablet ...). To overcome its current limitations (information density, access speed, endurance), a large number of research develop, especially exploring the concept of resistive memory (Re- RAM), which is based on switching between two resistance states (or more) via the application of a voltage.The Re-RAM whose resistance change depends on electrochemical reactions are potentially good candidates; the involved redox mechanisms are often, with particular cations migration of metal elements (between the electrodes), or oxygen deficiencies. This filamentary nature makes difficult to achieve extreme miniaturization at the nanoscale.For this purpose, a completely different class of materials - used in the field of energy storage - is explored. The objective of this thesis is thus to deepen the study of resistance switching phenomena observed in films LixCoO2. We first characterize the structural and electrical properties at the nanoscale, such films deposited on various types of substrates. We then seek to determine the electrochemical mechanisms underlying modification: they are in effect in reverse for the same sign of potential, as it is in the configuration of a contact nanoscale AFM tip / film, or in the configuration of a micrometer contact electrode / film / electrode. In the first configuration we determine the electrochemical reactions involved. In the second, we propose a radically different mechanism, supported by several converging results. Finally, we present promising first results regarding the potential applicability of these films to Re - RAM, and beyond, the neuromorphic circuits (multiple resistance states - additivity phenomena).

Thin film nanostructures may be defined as assemblies, arrays, or randomly distributed nanoparticles, nanowires, or nanotubes, which together form a layer of materials supported on a substrate surface. Because such nanostructures are supported on a substrate surface, their potential applications cover a wide area in optical, magnetic, electrochemical, electromagnetic, and optoelectronic devices. The focus of the present thesis is the development of methodologies to grow certain thin film nanostructures of some transition metal oxides (TMOs), including copper oxides and LixCoO2, through CVD, sol-gel, and electromagnetic radiation-mediated approaches. The work towards this objective can be divided into three parts: first, the design, synthesis, and systematic identification of novel metalorganic precursors of copper (monometallic) and Li and Co (bimetallic); second, the growth of nanostructured oxides thin films using these precursors; and third, the application of electromagnetic radiation to control or tailor the growth of as grown nanostructures. The underlying growth mechanisms substantiated by appropriate evidence have been put forward, wherever found relevant and intriguing. It may be added that the principal objective of the work reported here has been to explore the several ideas noted above and examine possibilities, rather than to study any specific one of them in significant detail. It is hoped earnestly that this has been accomplished to a reasonable extent. Chapter 1 reviews briefly the reports available in the literature on three specific methods of growing thin films nanostructures, namely chemical vapour deposition, sol-gel processing and light-induced approach. The objective of this chapter has been to provide the background of the work done in the thesis, and is substantiated with a number of illustrative examples. Some of the fundamental concepts involved, viz., plasmons and excitons, have been defined with illustration wherever found relevant in the context of the work. Chapter 2 describes the various techniques used for synthesis and characterisation of the metalorganic complexes as well as of the thin films. This chapters covers mostly experimental details, with brief descriptions of the working principles of the analytical procedures adopted, namely, infrared spectroscopy, mass spectroscopy, elemental analysis, and thermal analysis for characterisation of the metalorganic complexes. This is followed by a similarly brief account of techniques employed to characterize the thin films prepared in this work, viz., glancing incidence X-ray diffraction (GIXRD), field-emission scanning electron microscopy (FESEM), atomic force microscopy (AFM), electrostatic force microscopy (EFM), transmission electron microscopy (TEM), glancing incidence infra-red spectroscopy (GIIR) and, UV-visible spectroscopy. The metalorganic chemical vapour deposition (MOCVD) systems built in house and used for growth of films are described in detail. The topics in the different sections of the chapter are accompanied by pertinent diagrams. Chapter 3 deals with the design, synthesis and characterisation of novel polynuclear complexes of copper and cobalt. Keeping in mind the various advantages such as low toxicity, ease of synthesis, non-pyrophoricity, and low temperature volatility, of environmentally benign complexes based on biologically compatible such as triethanolamine, diethanolamine, the objective has been to synthesize complexes containing triethanolamine and diethanolamine of transition metals such as cobalt and copper, and to investigate their applicability in MOCVD processes as a novel class of precursors. With the notion of ‘better’ and efficient design of precursors, an attempt has been made, through a semi-empirical modeling, to understand the correlation between volatility and various intrinsic molecular parameters such as lattice energy, vibrational-rotational energy, and internal symmetry. Chapter 4 discusses the growth of nanoporous Cu4O3-C composite films through the MOCVD process employing Cu4(deaH)(dea)(oAc)5.(CH3)2CO as the precursor. The various characteristic aspects of as-grown films, such as their crystallinity, morphology, and composition have been covered elaborately in various sections of this chapter. The chapter describes the efficient guiding and confining of light exploiting the photonic band gap of these nanoporous films, which indicates the potential usefulness of these and similar films as optical waveguides. A model described in the literature on absorbing photonic crystals, wherein a periodically modulated absorption entails an inevitable spatial modulation of dispersion, i.e., of the index contrast to open a photonic band gap, has been used to calculate the indices of refraction of one of these nanoporous films. The chapter also reports briefly the preliminary electrochemical investigations carried out on a typical film, examining the notion of its application as the anode in a Li-ion rechargeable battery. Chapter 5 describes the synthesis of nanocrystalline LixCoO2 films by the sol-gel method. Reports available in literature indicate that the various phases of LixCoO2 are extremely sensitive to processing temperature, making it difficult to control dimensionality of a given phase using temperature as one of process parameters. We have investigated the possibility of using incoherent light to tailor the particle size/shape of this material. The as-grown and irradiated films were characterised by X-ray diffraction, and by microscopic and spectroscopic techniques.Optical spectroscopy was carried out in order to gain insight into the physico-chemical mechanism involved in such structural and morphological transformation. Chapter 6 deals with the synthesis of self-assembled nanostructures from the pre-synthesized nanocrystals building blocks, through optical means of exciton formation and dissociation. It has been demonstrated that, upon prolonged exposure to (incoherent) ultraviolet-visible radiation, LixCoO2 nanocrystals self-assemble into acicular architectures, through intermediate excitation of excitons. Furthermore, it has been shown that such self-assembly occurs in nanocrystals, which are initially anchored to the substrate surface such as that of fused quartz. This new type of process for the self-assembly of nanocrystals, which is driven by light has been investigated by available microscopic and spectroscopic techniques. Chapter 7 describes the stabilisation of chemically reactive metallic lithium in a carbonaceous nanostructure, viz., a carbon nanotube, achieved through the MOCVD process involving a lithium-alkyl moiety. This moiety is formed in situ during deposition through partial decomposition of a metalorganic precursor synthesized in house, which contains both lithium and cobalt. It is surmised that the stabilization of metallic Li in the nanostructure in situ occurs through the partial decomposition of the metalorganic precursor. Quantitative X-ray photoelectron spectroscopy carried out on such a film reveals that as much as 33.4% metallic lithium is trapped in carbon. Lastly, Chapter 8 briefly highlights the outlook for further investigations suggested by the work undertaken for this thesis. Novel precursors derived from biologically compatible ligands can open up possibility of growing new type of micro/nano-structures, and of unusual phases in the CVD grown films. Furthermore, it is proposed that the novel method of growth and alignment of nanocrystals through irradiation with incoherent light, employed for the specific material LixCoO2, may be employed for various other metallic and semiconducting materials.