The wireless world of today is essential to the everyday life of millions of people. Wireless technology is evolving at a rapid pace that's speed outmatches what the previous testing can handle. This necessitates the need for smarter and faster testing methods. One of the recent fast and efficient testing methods is fuzz testing. Fuzz testing is the generation and injection of unexpected input called "fuzzed" input for a system by slightly changing a base input hundreds or even thousands of times and introducing each change into a system to observe its effects. In this thesis, we developed and implemented a fuzz testing architecture to test 5G wireless system vulnerabilities. The proposed design uses multiple open-source software to create a virtual wireless environment for testing the fuzzed inputs' effects on the wireless attach procedure. Having an accessible and adaptable fuzzing architecture to use with wireless networks will help against malicious parties. Due to 5G simulation technology still being developed and the cost of ready-made 5G testing equipment, the architecture was implemented in an LTE environment using the srsRAN LTE simulation software, the Boofuzz fuzzing software, and Wireshark packet capture software. The results show consistent effects of the fuzz testing on the outputs of the LTE eNB. We also include a discussion of our future suggestions to improve the proposed fuzzing architecture. / Master of Science / The persistence of the cellular network is essential to the everyday life of millions of people. Cell phones and cell towers play an important role in business, communication, and recreation across the globe. The speed of advancements made in phones and cell towers technology is outpacing the speed of security testing, increasing the possibility of system vulnerabilities and unexplored back-doors. To cover the security testing gap, different automated testing models are being researched and developed, one of which is fuzz testing. Fuzz testing is the generation and injection of unexpected input called "fuzzed" input for a system by slightly changing a base input hundreds or even thousands of times and introducing each change into a system to observe its effects. The fuzzing architecture proposed in this thesis is used to test for security flaws in wireless cellular networks. We implemented our fuzz testing model in a simulated 4G cellular network, where the results show the effectiveness of the model on tracing network vulnerabilities. The results of the experiment show consistent effects of the fuzz testing on a wireless system. A discussion of how the proposed model can be further improved for future work is added to the end of this thesis.

No

Le standard LTE permet l’accès au très haut débit mobile et évolue afind’adresser les applications embarquées de type objets connectés. Mais dans la perspectived’un émetteur-récepteur LTE fabriqué dans une technologie CMOS faible-coût ethautement intégrable, l’amplificateur de puissance (PA) reste le seul bloc actif non intégréà ce jour. De plus, l’utilisation de modulations en quadrature oblige la conceptiond’amplificateurs très linéaires, générant une consommation statique plus importante.Dans ce contexte, ces travaux de thèse portent sur la recherche de composants etde circuits permettant d’atteindre de fortes puissances de sortie et de résoudre le compromisentre la linéarité et la consommation du PA. Deux axes de travail sont identifiéset développés dans cette thèse. Le premier axe porte sur l’utilisation d’un transistor depuissance intégrable en technologie CMOS. Trois cellules de puissance basées sur ce composantsont présentées, de l’étude théorique aux résultats de mesure. Dans le second axede recherche, ce transistor est intégré dans une architecture avancée de PA entièrementréalisée en CMOS. Une méthode de conception de transformateurs intégrés est égalementdéveloppée. Le PA proposé est reconfigurable pour adresser les différents besoinsimposés par le standard LTE : puissance de sortie, haute linéarité et faible consommation. / The LTE standard has been intended for mobile communications. Focusingnot only on higher data rate, LTE now aims at an implementation for the Internetof Things (IoT). The main challenge, in the perspective of a LTE front-end fully manufacturedin a low-cost and high integration level CMOS technology, remains the design ofpower amplifiers (PA). Furthermore, the use of complex quadrature modulation resultsin stringent linearity requirements resulting in an important quiescent dc consumption.In this context, this work focuses on the research of devices and circuits generatinghigh output power and solving the compromise between linearity and consumption ofthe PA. Two strands of work are identified and developed in this thesis. The first oneuses a power transistor available in CMOS technology. Three power cells based on thisdevice are proposed, with detailed theoretical and experimental results. In the secondone, this transistor is then used in a fully-integrated CMOS PA. A design methodologyfor integrated transformers is also presented. The proposed fully-integrated PA is reconfigurablein order to address the main LTE challenges : output power, high linearity andlow consumption.

Submitted by Rosivalda Pereira (mrs.pereira@ufma.br) on 2017-05-30T19:56:59Z No. of bitstreams: 1 FernandoCasteloBranco.pdf: 834917 bytes, checksum: 637b3f82aba4cce981014b690d89cb95 (MD5) / Made available in DSpace on 2017-05-30T19:56:59Z (GMT). No. of bitstreams: 1 FernandoCasteloBranco.pdf: 834917 bytes, checksum: 637b3f82aba4cce981014b690d89cb95 (MD5) Previous issue date: 2016-07-25 / In recent decades, the increasing use of mobile technologies has motivated the development of new techniques and algorithms to provide high transmission rates in mobile networks. Among them, LTE (Long Term Evolution) technology is one of the most significant standards for fourth generation (4G) mobile telephony. Due to its high data rates, LTE becomes very attractive to several kinds of applications. However, the quality of the transmissions can be severely impacted by the radio resources scheduling process, since it can lead to fluctuations in the delay and in the application data rates. To perform resource allocation in LTE networks, the scheduler uses various parameters estimated from the radio environment. This process can lead to the occurrence of erroneous estimates, which should be mitigated in order to deal with the inaccuracies of the wireless environments. In this context, this master thesis presents a fuzzy-based downlink scheduler for LTE networks, named PAFS (Performance-Aware Fuzzy Scheduler). The results show that the proposed scheduler promotes a suitable allocation of the radio resources, improving the performance of different QoS (Quality of Service) parameters without compromising the fairness among the system users. / Nas últimas d´ecadas, o aumento da utilização de tecnologias de comunicações móveis tem motivado o desenvolvimento de novas técnicas e algoritmos capazes de prover altas taxas de transmissão em redes celulares. Entre elas, a tecnologia LTE (Long Term Evolution) é um dos padrões mais significativos para a telefonia móvel de quarta geração (4G). Devido às suas elevadas taxas de dados, o LTE torna-se muito atraente para vários tipos de aplicações. No entanto, a qualidade das transmissões pode ser severamente impactada pelo processo de escalonamento de recursos de rádio, uma vez que pode levar a flutuações no atraso e nas taxas de dados das aplicações. Para executar a alocação de recursos em redes LTE, o escalonador utiliza vários parâmetros estimados a partir do ambiente de rádio. Esse processo pode levar à ocorrência de estimativas erradas, o que deve ser mitigado de forma a lidar com as imprecisões dos ambientes sem fio. Neste contexto, este trabalho apresenta um escalonador de enlace de descida baseado em lógica nebulosa chamado PAFS (Performance-Aware Fuzzy Scheduler ). Os resultados mostram que o escalonador proposto promove uma alocação adequada dos recursos de rádio, melhorando o desempenho de diferentes parâmetros de QoS (Quality of Service – Qualidade de Servi¸co) sem comprometer a justiça entre os usuários do sistema.

La norme 3G/UMTS a permis de développer les premières applications multimédia pour téléphones et tablettes mobiles. Le nouveau standard 4G/LTE (Long Term Evolution) a pour objectif le très haut débit mobile. Dans ce standard, beaucoup d’efforts ont portés sur la reconfiguration automatique des réseaux en fonction de la demande des clients dans un processus appelé Self-Organizing Network (SON). Le travail de cette thèse s’inscrit dans cette direction. La reconfiguration de réseaux est comprise principalement dans le sens des modèles, des méthodes et des outils pour analyser les indicateurs remontés du réseau et configurer automatiquement les paramètres. Nous avons essentiellement travaillé sur les paramètres des aériens, l’allocation des fréquences, des puissances d’émission et des inclinaisons verticales.Dans cette optique, étant donné la forte variabilité des données d’entrée de l’optimisation issues des remontées de réseau, cette thèse porte sur les modèles et algorithmes d’optimisation robuste dans le contexte de l’optimisation sous contraintes. L’optimisation robuste fait référence à un ensemble de procédés pour proposer des solutions à des problèmes combinatoires dans un contexte de données incertaines et de scénarios variables dans le temps. Une première partie est dédiée à l’état de l’art et présente les principes des Self-Organizing Network (SON). La deuxième partie est consacrée à l’état de l’art des méthodes en optimisation robuste. En troisième partie nous présentons la modélisation mathématique du problème d’optimisation pour lequel les données de trafic (répartitions des clients sur la zone de service et leurs demandes respectives) prennent des valeurs variables dans le temps. Une phase de diagnostic sur le fonctionnement du réseau à partir des données, et une étude de sensibilité des solutions vis-à-vis des variations dans la réalisation des données ont été faites en quatrième partie avec des algorithmes de recherche locale. La cinquième partie présente le travail de conception, développement et test sur scénarios, d’une Recherche Tabou ainsi qu’une analyse approfondie sur les méthodes de pilotage envisagées pour les SON en 4G. / The standard 3G/UMTS has launched the first multimedia applications for mobile phones and tablets. The new standard 4G/LTE (Long Term Evolution) has mobile broadband objective. In this standard a huge effort has been done on automatic network reconfiguration based on customer demand variation in a process called Self-Organizing Network (SON). The work of this thesis lies in this direction. Reconfiguration of networks lies mainly in the direction of models, methods and tools to analyze network Key Performance Indicators and automatically configure its settings. We mainly worked on the air interface parameters such that frequency assignment, emitted power and pattern vertical inclination.In this context, given the high variability of optimization input data issued from the network, this thesis focuses on robust optimization under constraints. The robust optimization refers to a set of processes to provide solutions to combinatorial problems with uncertain and variable scenarios of data over time. The first Section presents the principles of Self-Organizing Network (SON). The second Section concerns the state of the art on robust optimization. The third Section defines the mathematical model to optimize for which traffic data (distribution of customers and throughput requirements on the service area) take variable values over time. A data diagnostic phase on the network operation and a sensitivity analysis of the solutions were made in the fourth Section with several local search algorithms. The fifth Section presents the work of design, development and test of a Tabu Search method and a thorough analysis of SON control methodology proposed for 4G.

LTE- Long Term Evolution, marketed as 4G LTE, is a new generation of mobile-phone network which enable the mobile operator to provide significantly faster mobile broadband data rates. With the new redesign and simplification of the network architecture, 4G LTE can provide five time faster data rates than the current 3G networks. It will help the mobile operators to cope with ever growing mobile data traffic demands in a cost-effective manner. In Taiwan, the licenses for 4G LTE will be issued by the end of 2013, opening another business opportunities for the mobile industry. It’s expected that all the big mobile operators will acquire for the licenses. Telecom equipment vendor such as Nokia Siemens Networks and Ericsson are preparing for 4G LTE network trial and deployment as well. In light of the upcoming 4G LTE deployment in Taiwan, this thesis project was conduct to gain a better understanding of the current mobile users in Taiwan. The goal is to identify and understand customers’ attitudes, preferences, and satisfactions towards the current mobile carriers as well as customers’ expectations of the next generation carrier – 4G LTE. The data input of this thesis are survey data collected by on-line questionnaire from the students at National ChengChi University, and people living in Taiwan. The sample size was 872. The collected data was analyzed by SPSS, a computerized statistical program. The analysis report includes description of the sample, customers’ attitudes, and preferences of the current mobile carriers in general, satisfactions towards their current using carriers, expectations of 4G LTE carriers as well as their preferable carriers. The report also discusses the carrier switching pattern, and the factors influencing the switching behavior. After analyzing the findings of the study, the thesis report proposes that the mobile operators should deploy 4G LTE network coverage as soon as possible, concentrate on increasing mobile data service speed, maintain voice call service quality, offer a wide variety of handsets at some attractive prices and setting tariff rate competitively.

Modern wireless communication systems strive to enable communications at high data rates, over wide geographical areas, and to multiple users. Unfortunately, this can be a daunting task in practice, as natural laws governing the wireless medium may hinder point-to-point transmissions. Communications over large distances (path loss), and physical obstructions in line-of-sight signals (shadowing) are prime examples of such impediments. One promising solution is to deploy intermediary terminals to help reestablish such broken point-to-point communication links. Such terminals are called relay nodes, and the corresponding systems are referred to as being relay-aided. As in the case of point-to-point communication, design of efficient transmission and reception techniques in relay-aided systems depends on the availability of propagational channel state information. In practice, such information is only accurate to a certain degree which is governed by overhead constraints, feedback delay, and channel fluctuations due to mobility. Understanding the impacts of such partial channel state information, and devising transmission and reception methods based on such understandings, is the main topic of this dissertation. The transmission protocol classifies relays as either one-way, where the relay receives signals from one terminal, or two-way, where the relay receives signals from more than one terminal. Designs and solutions for both one- and two-way relaying systems are presented in this dissertation. Emphasis is placed on two-way relaying systems given their superior efficiency in utilizing channel resources. For one-way relaying this dissertation presents power loading strategies for multiuser-multicast systems derived based on the availability of full or partial channel state information at the terminals. In the case of two-way relaying, both single and multi-user systems are analyzed. For single-user two-way relaying, this dissertation presents optimal methods of acquiring partial channel state information via pilot-aided channel estimation methods. This includes an analysis of the effects of channel estimation upon the system sum-rate. Also, the design of channel equalizers exhibiting robustness to partial channel state information is proposed. For multi-user two-way relaying, this dissertation presents several precoding strategies at the relay terminal(s) to combat the effects co-channel interference in light of the existence of self-interference inherent to two-way relaying operations. / text

Τα τελευταία χρόνια τα δίκτυα επικοινωνιών τρίτης γενιάς (3G) - Universal Mobile Telecommunication System (UMTS) γνωρίζουν μεγάλη άνθηση και η χρήση τους έχει επεκταθεί στις περισσότερες ευρωπαϊκές χώρες, όπως και στην Ελλάδα. Τα νέα αυτά κινητά δίκτυα αντικαθιστούν τα υπάρχοντα κινητά δίκτυα δεύτερης γενιάς και επιπλέον προσφέρουν προηγμένες υπηρεσίες στους κινητούς χρήστες. Ωστόσο, η αδήριτη ανάγκη για μεγαλύτερες (ευρυζωνικές) ταχύτητες πρόσβασης οδήγησε στην περαιτέρω ανάπτυξη των 3G δικτύων και στην υιοθέτηση νέων τεχνολογιών, με κυριότερο εκπρόσωπο τους την τεχνολογία High Speed Packet Access (HSPA). Η τεχνολογία HSPA αποτελεί τη φυσιολογική μετεξέλιξη του UMTS, η οποία πολλές φορές συναντάται και ως 3.5G ή 3G+, προκειμένου να δηλώσει την αναβάθμιση του 3G (UMTS) προτύπου. Ωστόσο, παρά το γεγονός ότι η τεχνολογία HSPA αναμένεται να προσφέρει τη δυνατότητα παροχής πληθώρας ευρυζωνικών υπηρεσιών, το 3rd Generation Partnership Project (3GPP), που αποτελεί τον οργανισμό που προτυποποιεί τις νέες τεχνολογίες και ορίζει τις προδιαγραφές τους, ήδη μελετά και επεξεργάζεται νέες τεχνολογίες που θα επικρατήσουν την αμέσως επόμενη δεκαετία στην αγορά των κινητών επικοινωνιών. Το νέο αυτό project αποκαλείται Long Term Evolution (LTE) και στοχεύει στην επίτευξη ακόμη υψηλότερων ρυθμών μετάδοσης σε συνδυασμό με την αξιοποίηση μεγαλύτερου εύρος ζώνης. Κύρια προοπτική του LTE αποτελεί η διασφάλιση της ανταγωνιστικότητας και η επικράτηση του προτύπου στο χρονικό ορίζοντα της επόμενης δεκαετίας. Ταυτόχρονα με την εκτεταμένη εξάπλωση των δικτύων κινητών επικοινωνιών επόμενης γενιάς καθώς και τις αυξημένες δυνατότητες των κινητών συσκευών, οι πάροχοι πολυμεσικού περιεχομένου και υπηρεσιών ενδιαφέρονται όλο και περισσότερο για την υποστήριξη της πολυεκπομπής (multicasting) δεδομένων στα δίκτυα αυτά με σκοπό την αποτελεσματική διαχείριση και επαναχρησιμοποίηση των διαθέσιμων πόρων του δικτύου. Επιπρόσθετα, οι χρήστες των κινητών δικτύων έχουν πλέον την απαίτηση να προσπελαύνουν εφαρμογές και υπηρεσίες οι οποίες μέχρι σήμερα μπορούσαν να διατεθούν αποκλειστικά από τα συμβατικά ενσύρματα δίκτυα. Έτσι λοιπόν στις μέρες μας γίνεται λόγος για υπηρεσίες πραγματικού χρόνου όπως mobile TV, mobile gaming, mobile streaming κ.α. Ένα από τα σημαντικότερα βήματα των δικτύων κινητών επικοινωνιών προς την κατεύθυνση της παροχής νέων, προηγμένων πολυμεσικών υπηρεσιών είναι η εισαγωγή της υπηρεσίας Multimedia Broadcast / Multicast Service (MBMS). Η υπηρεσία MBMS έχει σαν κύριο σκοπό την υποστήριξη IP εφαρμογών πανεκπομπής (broadcact) και πολυεκπομπής (multicast), επιτρέποντας με αυτό τον τρόπο την παροχή υπηρεσιών υψηλού ρυθμού μετάδοσης σε πολλαπλούς χρήστες με οικονομικό τρόπο. Η multicast μετάδοση δεδομένων σε κινητά δίκτυα επικοινωνιών είναι μια σχετικά νέα λειτουργικότητα η οποία βρίσκεται ακόμη στο στάδιο των δοκιμών και της προτυποποίησης της. Ένας multicast μηχανισμός μεταδίδει τα δεδομένα μόνο μία φορά πάνω από κάθε ασύρματο σύνδεσμο που αποτελεί τμήμα των μονοπατιών προς τους προορισμούς-κινητούς χρήστες. Στη συγκεκριμένη διπλωματική εργασία παρουσιάζουμε αναλυτικά τον multicast τρόπο λειτουργίας του MBMS και αναλύουμε την απόδοσή του με βάση το κόστος μετάδοσης των πακέτων κάτω από διάφορες τοπολογίες δικτύου και κατανομές χρηστών. Η ανάλυση του συνολικού κόστους μετάδοσης λαμβάνει υπόψη το κόστος αποστολής των πακέτων από τον αποστολέα στους παραλήπτες συμπεριλαμβανομένου του κόστους για το paging των χρηστών, το κόστος επεξεργασίας και μετάδοσης στους κόμβους του δικτύου και το κόστος που υπεισέρχεται στους συνδέσμους της τοπολογίας. Στα πλαίσια της αξιολόγηση της ανάλυσης εξετάζουμε όλα τα κανάλια μεταφοράς που μπορούν να χρησιμοποιηθούν για τη μετάδοση των multicast δεδομένων πάνω από την ασύρματη διεπαφή του δικτύου. Η ανάλυση θα φανερώσει πως ανάλογα με την τρέχουσα κατάσταση του δικτύου (πλήθος χρηστών, κατανομή χρηστών, κοκ), όλα τα διαθέσιμα κανάλια μεταφοράς μπορούν να χρησιμοποιηθούν για την αποδοτική μετάδοση των multicast δεδομένων στους κινητούς χρήστες / In the recent years, the usage of third generation (3G) - Universal Mobile Telecommunication System (UMTS) cellular networks has begun to rise in most European countries, as in Greece. 3G networks replace the second generation mobile networks and moreover, are in position of offering advanced services to mobile users. However, the need for higher (broadband) speeds led to the further development of 3G networks and to the adoption of new technologies, with main representative the High Speed Packet Access (HSPA) technology. HSPA constitutes the evolution of UMTS and is known as 3.5G or 3G+ in order to indicate the upgrade from UMTS. However, despite the fact that HSPA technology is expected to allow the provision of numerous broadband services, the 3rd Generation Partnership Project (3GPP), that constitutes the authorized organization for the standardization of new mobile technologies, already examines new technologies that will prevail in the mobile communications industry over the next decades. This novel project is known as Long Term Evolution (LTE) and aims at achieving increased data rates and reduced latency compared to UMTS and HSPA networks. Simultaneously, multimedia content and service providers show an increased interest in supporting multicast data in order to effectively manage and re-use the available network resources. Additionally, more and more users require access to applications and services that until today could only be accessed by conventional wired networks. Thus, real time applications and services may face low penetration today, however, they are expected to gain high interest in future mobile networks. These applications actually reflect a modern, future way of communication among mobile users. For instance, mobile TV is expected to be a ‘killer’ application for 3G’s. One of the most significant steps towards the provision of such demanding services is the introduction of Multimedia Broadcast/Multicast Service (MBMS). MBMS is a point-to-multipoint service in which data is transmitted from a single source entity to multiple destinations, allowing the networks resources to be shared. Actually, MBMS extends the existing UMTS infrastructure and efficiently uses network and radio resources, both in the core network and most importantly, in the air interface of UMTS, where the bottleneck is placed to a large group of users. Therefore, MBMS constitutes an efficient way to support the plethora of the emerging wireless multimedia and application services such as IP Video Conferencing and Video Streaming. In this thesis, we analytically present the multicast mode of MBMS and analyze its performance in terms of packet delivery cost under various network topologies and multicast users’ distributions. The analysis of total packet delivery cost takes into account the paging cost, the processing cost and the transmission cost at nodes and links of the topology. Furthermore, for the evaluation of the scheme, we consider different transport channels for the transmission of the multicast data over the Iub and Uu interfaces of the UMTS architecture. The analysis reveals that depending on the current network conditions (user population, user distribution, etc.), all the available transport channels could be used for the efficient delivery of multicast data to mobile users.

Le monde des communications par satellite est dominé par les systèmes de diffusion de la télévision. Cependant, des satellites de communication offrent aussi des services de téléphonie et de données. Ils sont regroupés dans les familles des systèmes fixes et mobiles et ciblent des marchés de niche. Dans cette thèse, nous avons la volonté d’étendre les scénarios d’utilisation de ces systèmes. Notre vision nous dicte que leur développement est lié à l’utilisation de réseaux hybrides mobiles satellite-terrestre. En effet, une utilisation complémentaire des deux segments permet de s’affranchir d’une concurrence trop féroce des réseaux de télécommunications terrestres. Pour cela, nous optons pour deux applications qui nous paraissent prometteuses : un réseau mobile LTE (Long Term Evolution) avec des stations de base qui possèdent un backhaul satellite et un réseau MANET (Mobile Ad-hoc NETwork) qui s’interconnecte à des réseaux extérieurs grâce à des liaisons satellite. Nous soulevons l’un des problèmes les plus contraignants du réseau mobile LTE avec des backhauls satellite : la gestion de la mobilité. L’analyse du standard nous a conduits à conclure quant à la nécessité d’optimiser les procédures du handover. Ceux qui nécessitent des modifications surviennent entre des stations de base qui n’utilisent pas le même backhaul satellite et entre une station de base avec un backhaul satellite vers une avec un backhaul terrestre. Deux points nous ont semblé importants : la phase de préparation et le mécanisme qui permet d’éviter les pertes. Nous proposons donc une nouvelle phase de préparation qui prend en compte le retard induit par la liaison satellite ainsi qu’une phase de préparation à double décision combinée avec une préparation de multiples stations de base. Nous tentons ainsi de maximiser les chances de réaliser un handover avec succès. Puis, nous avons imaginé un mécanisme qui permet à la fois d’éviter les pertes lors de l’exécution du handover et de sauvegarder les précieuses ressources du satellite. Les réseaux MANET associés à des liaisons satellite offrent des caractéristiques très intéressantes pour les communications d’urgence, telles que l’indépendance vis-à-vis des infrastructures terrestres susceptibles d’être endommagées par des catastrophes ainsi qu’un déploiement rapide pour une intervention sur le théâtre des opérations. Nous avons souhaité améliorer l’un des points cruciaux dans le cadre d’une hybridation : la sélection de la passerelle satellite. Nous avons donc développé un mécanisme qui prend en compte la charge sur les passerelles satellite ainsi que le phénomène d’oscillation de passerelle souvent négligé dans la littérature. Ces optimisations ont pour but de favoriser le développement de réseaux hybrides satellite terrestres en améliorant les performances de ces réseaux. L’avenir nous semble prometteur quant à l’utilisation de la technologie LTE avec un backhaul satellite pour lequel nous avons proposé une nouvelle gestion de la mobilité qui est primordiale pour son développement. / Satellite communications are leaded by television broadcasting. Yet, fixed and mobile satellite systems provide voice services as well as IP-based applications. In this thesis, we try to develop user scenarios in order to extend their targeted market. Our vision to reach this objective consists to use hybrid satellite and terrestrial mobile networks. This network design avoids a competition between both segments in which a satellite success is difficult to imagine. Furthermore, hybrid networks may draw benefits from both segments. Two promising scenarios have been selected. The first one consists in a mobile LTE network (Long Term Evolution) with base stations backhauled by satellite links whereas the second scenario is composed of a Mobile Ad-hoc Network (MANET) connected to external networks thanks to satellite systems. One of the main problems in the hybrid LTE scenario is caused by mobility procedures. As a consequence of the standard analysis, we have decided to optimize the mobility management in two cases: a handover between two base stations for which the backhaul is provided by two different satellite terminals and a handover from a base station with a satellite backhaul to one with a terrestrial backhaul. Two procedures have drawn our attention: the preparation phase and the loss avoidance mechanism during the execution phase. First of all, we design a new procedure for the preparation which takes into account the delay induced by the satellite link. This new phase is based on a twofold decision preparation associated with multiple preparations. This solution leads to an increase of handover success. The second optimization aims to avoid losses during the execution phase and, at the same time, save satellite resources. MANET and satellite hybridization leads to very interesting characteristics for public safety communications. Indeed, these networks are independent of terrestrial infrastructures that can be impaired or destroyed. Furthermore, they can be rapidly deployed in the theater of operation. Gateway selection is a crucial problem linked to hybrid MANET. Therefore, we have focused our work on this mechanism taking into account the measured load on the satellite links as well as an oftenneglected phenomenon, the gateway flapping. These optimizations tend to promote hybrid satellite and terrestrial networks improving their performance. A promising future is foreseen for the hybrid LTE technology and we have proposed a solution to a problem that may be very detrimental to its deployment.

IEEE 802.11p, the known standard for Vehicular Adhoc NETworks (VANETs), suffers from scalability issues and unbounded delay. In addition, the desire to use networks already in existence has created motivation for using cellular networks for vehicular applications. LTE-Advanced is one of the most promising access technologies in the wireless field, providing high data rate, low latency, and a large coverage area. Thus, LTE/LTE-A can be potential access technologies for supporting vehicular applications. Vehicular safety applications are based on broadcasting messages to neighboring vehicles. The vehicle location precision is crucial for safety applications. Thus, the freshness of the information (i.e. vehicle location) at the neighboring vehicles is very important. As LTE is an infrastructure-based network, all transmissions should pass through it. When the load of the network is high compared to the available resources, large delays may occur. The focus of this thesis is to propose solutions to make LTE suitable for vehicular safety applications. The first solution is to adapt the vehicular safety application to be suitable in LTE network. For this purpose, we propose an adaptation of the safety message generation rate. This adaptation uses a queueing model to compute the freshness of the information of vehicles at the destination, based on their message generation rates. It then adjusts the generation periods to provide a similar accuracy for all vehicles. The second approach is to modify the LTE and make it suitable for these kinds of applications. Thus, we proposed a scheduler for LTE which is suitable for vehicular safety applications. It considers the speed and location of the vehicles to allocate the resources to them for the transmission of safety messages. We also studied the message dissemination in the downlink, and proposed an efficient way to deliver the safety messages to the neighboring vehicles. Finally, we propose a scheme that uses both LTE-D2D and LTE-cellular communication for the transmission of safety messages. The centralized location information is used for Device-to-Device (D2D) pair discovery and resource allocation. The proposed scheme provides resource efficiency by enabling the reuse of the resources by vehicles. We also study the effect of the awareness range and period of updating location information at the server on resource usage and accuracy of D2D pair detection.