No description available.

A large variety of diferrocenyl compounds bridged by an organic wire fragment in a generic form of -CH=CH-X-CH=CH- were first synthesized, in which the X unit is a functional group/atom. These compounds were studied by structural analysis, electrochemistry, intervalence NIR absorption and other spectroscopic techniques. The results indicated that metal-ligand redox matching is most essential in facilitating long-range electron transfer in the mixed-valence complexes. A series of doubly-bridged diferrocenyl compounds and wire-linked triferrocenes were also synthesized and studied. All doubly-bridged diferrocenyl compounds demonstrated nearly doubled electronic coupling in comparison to their singly-bridged analogues. Thus the use of parallel wires in such systems represents a facile approach to improve communication in molecular electronics. For triferrocenes linked by symmetric wires, the electronic interaction between the redox-active centers was rather dynamic when the bridging component was short or the charge was delocalized among the ligand and metal centers. For triferrocenes bridged by asymmetric wires, depending on the direction of the polar linking chain, the central ferrocene becomes a molecular switch, turning on or off the communication between the two end ferrocenes. Finally, to eliminate the metal-ligand orbital mixing problem, we also bound the wires with two redox-active styrylpyrrole termini, for which the molecules are purely organic. It was found that when the ð-conjugation was maintained, the oligomers were fully delocalized systems.

Copper-organonitrogen complexes are studied by threshold photoionization and zero electron kinetic energy photoelectron spectroscopy. These complexes are prepared in pulsed laser vaporization supersonic molecular beams. Adiabatic ionization energies of the neutral species and vibrational frequencies of the neutral and ionic complexes were measured. Metal-ligand bond dissociation energies were obtained from the theoretical calculations or the experiments. More importantly, by combining the spectroscopic measurements, quantum chemical calculations, and spectral simulations, metal-ligand bonding structures are determined for copper complexes of diamines, pyridine, diazines, aminopyridines, polypyridines, and imidazole. The Cu-ethylenediamine, -(1,3-propanediamine), and -(1,4-butenediamine) complexes have been determined to be in a hydrogen-bond stabilized monodentate configuration. However, Cu atom binds to both two nitrogens in the methyl-substituted ethylenediamines. The change of the Cu binding from the monodentate to the bidentate mode arises from the competition between copper coordination and hydrogen bonding. Although pyridine, diazines, and imidazole molecules can function as a s-donor through the nitrogen atom, a p-acceptor or p-donor through six-membered or five-membered aromatic ring, only the s bonding mode is predicted by the theory and identified by the ZEKE spectroscopy. For aminopyridine molecules, s bonding through the sp2 or sp3 hybrid electron lone pair and p bonding through the pyridine ring are possible. Yet, the s bonding through the sp2 electron donation is calculated to be the strongest, and the Cuaminopyridine complexes formed by such bonding mechanism are identified by the experiments. Moreover, monodentate Cu-(4,4'-bipyridine), bidentate Cu-(2,2'-bipyridine) and Cu-(1,10-phenanthroline), and tridentate Cu-(2,2':6',2?-terpyridine) are established to be the most stable structure and are observed by experiments. It is surprising to find that the tridendate planar structure of Cu-(2,2':6',2?-terpyridine) changes to a twisted Cs structure upon ionization.

Cette thèse décrit l'étude réalisée sur des complexes portant le ligand pince indendiide, incluant leur synthèse et caractérisation ainsi que leur activité en catalyse coopérative métal/ligand de cycloisomérisation d'acide alcynoïques et N-tosyl alkynylamides. Le premier chapitre fait un point bibliographique non-exhaustif du domaine de la catalyse coopérative métal/ligand, des premiers travaux précurseurs de Noyori sur les processus d'hydrogénation avec des complexes amido de ruthénium aux récents travaux de Milstein avec des complexes pince à base de pyridine déaromatisée. Le deuxième chapitre porte sur le développement de nouveaux complexes pince indendiide du Pd et leur application en catalyse coopérative métal/ligand. La modification structurale réalisée, remplacement des substituants Ph sur l'atome de phosphore par des iPr, visait à augmenter la robustesse des complexes et améliorer ainsi leur performance en catalyse. Deux nouveaux complexes ont été préparés et entièrement caractérisés (RMN, IR, DRX). Les premières évaluations d'activité catalytique ont en effet révélé une meilleure activité de ces nouveaux complexes comparés à leurs prédécesseurs, puisqu'ils sont capables de cycloisomériser de manière efficace les N-tosyl alkynyl amides. Une large gamme de substrats a été étudiée, incluant N-tosyl alkynyl amides linéaires non-substituées et substituées, d'autres à base de squelette phénylène, et même celles à alcyne en position interne. De manière générale, une majorité d'exo-lactames est formée avec des très bons rendements (~90%) sauf lorsque l'alcyne est en position interne, cas dans lequel l'endo-lactame est formée préférentiellement. Il est important de souligner que le résultat phare de ce chapitre est la préparation pour la première fois de methylène lactames à 7-chainons par cycloisomérisation. Malgré les avancées notables atteintes dans ce chapitre, la grand modularité des complexes pince étudiés permet d'espérer des améliorations du système catalytique. Ces améliorations sont présentées lors du troisième chapitre. Il s'agit ici de remplacer l'atome de Pd par le Pt. Les nouveaux complexes préparés ont été évalués dans la cycloisomérisation de acides alcynoïques et N-tosyl alcynyl amides et le meilleur d'entre eux a été identifié (dimère à groupement iPr sur l'atome de P). A nouveau une large gamme de substrats, acides et amides, a été étudiée faisant varier la taille de cycle et la position de l'alcyne. La stratégie s'est avérée fructueuse puisque de manière générale ce complexe de Pt s'est montré plus actif que l'équivalent à base de Pd. En particulier, ce complexe présente une activité remarquable pour la transformation d'alcynes internes et la formation de cycles à 6 et 7-chaînons. La connaissance approfondie du mécanisme de la réaction a conduit aussi à l'utilisation d'additifs donneurs de liaison H afin de favoriser la réaction de cyclisation. Grâce à l'utilisation du pyrogallol, la vitesse de réaction et la sélectivité 6-endo (vs 5-exo) et 6-exo (vs 7-endo) ont été améliorées de manière significative. Pour la première fois, une grande variété de d et e-lactones et lactames ont pu être préparées avec des très bonnes sélectivités et rendements. L'ensemble de ces résultats souligne les propriétés uniques de ces complexes pince indendiide et étend leurs applications catalytiques. / This work contributes to the study of new indenediide pincer complexes, including their synthesis, characterization, and finally their activity in metal-ligand cooperative catalytic cycloisomerization of a range of alkynoic acids and N-tosyl alkynylamides. The 1st chapter compiled a non-exhaustive bibliographical survey of the field of metal-ligand cooperation in catalysis, from the pioneering work of Noyori using amido-Ruthenium complexes for hydrogenation, to the recent work of Milstein with pincer complexes based in dearomatized pyridine. The 2nd chapter of this thesis is dedicated to the development of the newly-tuned Pd indenediide pincer complexes and their application in metal-ligand cooperative catalysis. A structural modulation, by varying the R substituents Ph at phosphorus with iPr, was performed in attempt to increase the robustness of the Pd pincer complexes and enhance thereby their catalytic performance. Thus, two novel complexes were successfully synthesized and fully characterized (NMR, IR, XRD). Initial study demonstrated a better performance of the new complexes than their predecessor, as the cycloisomerization of N-tosyl alkynyl amides can be efficiently achieved. Moreover, the N-tosyl alkynyl amide scope was extensively studied, from linear non-substituted C5-C7, then substituted, benzo-fused, and finally to internal alkyne ones. Eventually, a majority of exo lactams products, together with the unusual internal endo lactam can be prepared in excellent yields (most often 90 %). Note that the obtaining for the first time of 7-member ring methylene caprolactam via a cycloisomerization was pretty inspiring. Nevertheless, improvements for the current catalytic system remain. The 3rd chapter of this thesis is devoted to further modulation of the pincer complexes, in particular the switching of metal center from Palladium to Platinum. The newly-synthesized Pt complexes were evaluated in the cycloisomerization of N-tosyl alkynylamides and alkynoic acids, and the dimeric complex with iPr groups at the P atoms exhibited the best performance. The substrate scope was further extended to more challenging ones. In most cases, reactions were remarkably accelerated. Direct comparisons upon amides and acids bearing internal alkyne further indicated that the Pt complex outperformed its Pd analogue. In particular, the Pt pincer complex is extremely efficient for the formation of 6 and 7-membered rings. In light of in-depth understanding of the mechanism, several selected additives were employed as H-bond donor, to reinforce the cyclization. The reaction rate and selectivity for 6-endo (vs 5-exo) as well as 6-exo (vs 7-endo) cyclizations was greatly improved by using pyrogallol. For the first time, a large variety of d and e-lactones/lactams could be prepared with high selectivities and in very good yields. These results emphasize the unique properties of SCS indenediide pincer complexes and extend further their catalytic applications.

No description available.

京都大学 / 0048 / 新制・課程博士 / 博士(工学) / 甲第21268号 / 工博第4496号 / 新制||工||1699(附属図書館) / 京都大学大学院工学研究科物質エネルギー化学専攻 / (主査)教授 小澤 文幸, 教授 大江 浩一, 教授 中村 正治 / 学位規則第4条第1項該当 / Doctor of Philosophy (Engineering) / Kyoto University / DFAM

No description available.

No description available.

Over the past few decades, supramolecular self-assembly has become an alternative synthetic tool for constructing targeted discrete molecular architectures. Among various interactions, metal-ligand coordination has attracted great attention owing to high bond enthalpy (15−50 Kcal/mol) and predictable directionality. The basic principle of metal-ligand directed self-assembly relies on the proper designing of information encoded rigid complementary building units (a transition metal based acceptor and a multidentate organic donor) that self-recognize themselves in a chemically reasonable way (depends on their bite angle and symmetry) during self-assembly process. As far as acceptor units are concerned, Pd(II) and Pt(II) metal-based cis-blocked 90° acceptors have so far been used greatly for the construction of a library of 2D/3D discrete supramolecular architectures due to their rigid square planar geometry and kinetic lability. However, in some cases the efforts to design finite supramolecular architectures using a cis-blocked 90° acceptor in combination with a bulky donor ligand were unsuccessful, which may be due to the steric demands of donor ligand. Moreover, the resulted assemblies from such cis-blocked 90° building unit are mostly non-fluorescent in nature and limit the possibility of using them as chemosensors for various practical applications. Unlike that of rigid square-planar Pt(II) and Pd(II)-metal based building blocks, the use of other transition metal-based building units for the construction of discrete nanoscopic molecular architectures are known to lesser extent, mainly because of their versatile coordination geometries. However, some of the half-sandwiched piano-stool complexes of late transition metals like Ru, Os, Ir and Rh are known to maintain the stable octahedral geometry under various reaction conditions. Moreover, the self-assembly using redox active transition metal-based building units may lead to redox active assemblies. On the other hand, symmetrical rigid donors have been widely used as the favorite choices for the purpose of constructing desired product mainly due to their predictable directionality. Flexible linkers are not predictable in their directionality during self-assembly process and thus results mostly in undesired polymeric products. Furthermore, metal-ligand directed self-assembly provides opportunity to introduce multifunctionality in a single step within/onto the final supramolecular architectures. Among various functional groups, the incorporation of unsaturated ethynyl functionality is expected to enrich the final assemblies to be π-electron-rich and the attachment of ethynyl functionality with heavy transition metal ions are known to be luminescent in nature due to the facile metal to ligand charge transfer (MLCT). Hence, the final supramolecular complexes can be used as potential fluorescence sensors for electron-deficient nitroaromatics, which are the chemical signature of most of the commercially available explosives. The main thrust of the present investigation is focused on the judicious design and syntheses of multifaceted 2D/3D supramolecular architectures of finite shapes, sizes and functionality using Pt(II)/Ru(II) based “shape-selective” organometallic building blocks and investigation of their application as chemosensors. CHAPTER 1 of the thesis presents a general review on the core concepts of self-assembly and supramolecular chemistry. In particular, it underlines the importance of metal-ligand directional bonding approach for designing a vast plethora of discrete 2D/3D supramolecular architectures with tremendous variation in topology. CHAPTER 2 describes the design and syntheses of a series of 2D metallamacrocycles using carbazole-functionalized shape-selective 90° building units. A new Pt2II organometallic 90° acceptor 3,6-bis[trans-Pt(PEt3)2(NO3)(ethynyl)]carbazole (M1) containing ethynyl functionality is synthesized via Sonagashira coupling reaction and characterized. The combination of M1 with three different flexible ditopic donors (L1−L3) afforded [2 + 2] self-assembled molecular squares (1−3), respectively [where L1 = 1,3-bis(4-pyridyl)isophthalamide; L2 = 1,3-bis(3-pyridyl)isophthalamide; L3 = 1,2-bis(4-pyridyl)ethane] (Scheme 1). Scheme 1: Schematic presentation of the formation of a series of [2 + 2] self-assembled molecular squares. An equimolar (1:1) combination of same acceptor M1 with rigid linear ditopic donors (L4-L5) yielded [4 + 4] self-assembled octanuclear molecular squares 4 and 5, respectively [L4 = 4,4’-bipyridine; L5 = trans-1,2-bis(4-pyridyl)ethylene]. Conversely, a similar reaction of M1 with an amide-based unsymmetrical linear flexible ditopic donor L6 resulted in the formation a [2 + 2] self-sorted molecular rhomboid (6a) as a single product [L6 = N-(4-pyridyl)isonicotinamide]. Despite the possibility of several linkage isomeric macrocycles (rhomboids, triangles and squares) due to different connectivity of the ambidentate linker, the formation of a single and symmetrical molecular rhomboid 6a as an exclusive product is an interesting observation. This chapter also presents the synthesis and characterization of a complementary 90° dipyridyl donor 3,6-bis(4-pyridylethynyl)carbazole (L7). Stoichiometric combination of L7 with several PdII/PtII-based 90° acceptors (M2−M4) yielded [2 + 2] self-assembled molecular “bowl” shaped macrocycles (7−9) respectively, in good yields [M2 = cis-(dppf)Pd(CF3SO3)2; M3 = cis-(dppf)Pt(CF3SO3)2; M4 = cis-(tmen)Pd(NO3)2]. All these newly synthesized macrocycles were characterized by various spectroscopic techniques and molecular structures of some of them were confirmed by single crystal X-ray diffraction analysis. In addition to their syntheses and characterization, fluorescence chemosensing ability for various analytes was investigated. Macrocycle 1 is a system composed of amide-based receptor units and carbazole-based fluorophore moieties. The fluorescence study of 1 elicited a dramatic enhancement in the fluorescence intensity upon gradual addition of P2O74- anion in DMF/H2O solvent mixture, whereas similar titration under identical condition with other anions like F-, ClO4-, and H2PO4- did not show such change. Hence, molecular square 1 can be used as selective fluorescence sensor for pyrophosphate (P2O74-) anion. Due to their extended π-conjugation, macrocycles 3-4 were used as fluorescence sensors for electron-deficient nitroaromatics, which are the chemical signatures of many commercially available explosives. The fluorescence study showed a marked quenching of initial fluorescence intensity of the macrocycles(3-4) upon gradual addition of picric acid (PA) and they exhibited large fluorescence quenching responses with high selectivity for nitroaromatics among various other electron deficient aromatic compounds tested. As macrocycle 7 has large concave aromatic surface, it was utilized as a suitable host for large convex guest such as fullerene C60. The fluorescence quenching titration study suggested that macrocycle 7 forms a stable ~1:1 host-guest complex with C60 and the calculated association constant (KSV) is 1.0 × 105 M-1. CHAPTER 3 presents two-component coordination-driven self-assembly of a series of [2 + 2] molecular rectangles and a [2 + 4] self-assembled molecular tetragonal prism. An equimolar combination of pre-designed linear PtII2-acceptors M5−M6 separately with three different “clip” donors (L2, L8−L9) led to the formation of [2 + 2] self-assembled tetranuclear cationic molecular rectangles (10−15), respectively [M5 = 1,4-bis[trans-Pt(PEt3)2(NO3)(ethynyl)] benzene; M6 = 4,4’-bis[trans-Pt(PEt3)2(CF3SO3)(ethynyl)]biphenyl; L8 = 1,3-bis(3-pyridyl)ethynylbenzene; L9 = 1,8-bis(4-pyridyl)ethynylanthracene]. Rectangles 10-15 showed strong fluorescence in solution owing to their extended π-conjugation. Amide-functionalized rectangle 10 was used as a macrocyclic receptor for dicarboxylic acids. Solution state fluorescence study showed that rectangle 10 selectively binds (KSV = 1.4 × 104 M-1) with maleic acid by subsequent enhancement in emission intensity and addition of other analogous aliphatic dicarboxylic acids such as fumaric, succinic, adipic, mesaconic and itaconic acids causes no change in the emission spectra; thereby demonstrated its potential use as macrocyclic receptor in sensor applications. Since rectangle 15 is enriched with π-conjugation, it was examined as a fluorescence sensor for electron-deficient nitroaromatics such as picric acid, which is often considered as a secondary chemical explosive. The fluorescence study of 15 showed a significant quenching of initial emission intensity upon titrating with picric acid (PA) and it exhibited the largest fluorescence quenching response with high selectivity for picric acid. Scheme 2: Schematic representation of formation of [2 + 4] self-assembled of molecular tetragonal prism. This chapter also describes two-component coordination [2 + 4] self-assembly of a pyrene-based PtII8 tetragonal prism (16) as shown in Scheme 2, using a newly designed tetratopic organometallic acceptor (M7; 1,3,6,8-tetrakis[trans-Pt(PEt3)2(NO3)(ethynyl)]pyrene) in combination with an amide-based “clip” donor (L2) and propensity of this prism (16) as a selective fluorescence sensor for nitroaromatic explosives has been examined both in solution as well as in thin-film. CHAPTER 4 reports the synthesis and structural characterization of a series of Ru(II)-based bi-and tetra-nuclear metallamacrocycles and hexanuclear trigonal prismatic cages. In principle, the self-assembly of a “clip” acceptor with an asymmetrical ditopic donor is expected to give two different linkage isomeric (head-to-tail and head-to-head) molecular rectangles because of different bond connectivity of the donor. However, the equimolar combination of half-sandwiched p-cymene binuclear Ru(II)-based “clip” acceptors (M8−M9) and an amide-based ambidentate donor (L6) resulted in the self-sorting of single linkage (head-to-tail) isomeric rectangles 17−18 as only products, respectively [M8 = [Ru2(μ-η4-C2O4)(MeOH)2(η 6-p-cymene)2](CF3SO3)2; M9 = [Ru2(μ- η4-C6H2O4)(MeOH)2(η 6-p-cymene)2](CF3SO3)2]. Molecular structures of these head-to-tail linkage isomeric rectangles were unambiguously proved by single crystal X-ray diffraction analysis. Likewise, the self-assembly of oxalato-bridged Ru(II) acceptor M8 with a rigid dipyridyl “clip” donor L8 yielded a tetranuclear cationic pincer complex 19, while a similar reaction of M8 with an anthracene-functionalized “clip” donor L9 having shorter distance (between their reactive sites) compared to L8 led to the formation of [1 + 1] self-assembled macrocycle 20. This chapter also represents the design and synthesis of two hexanuclear trigonal prismatic cages (21−22) from the self-assembly of a π-electron rich tripyridyl donor (L10; 1,3,5-tris(4-pyridylethynyl)benzene) in combination with binuclear acceptors M8 and M9, respectively (Scheme 3). Formation of these prismatic cages was initially characterized using various spectroscopic techniques and the molecular structure of oxalato-bridged prism 21 was confirmed by single crystal X-ray diffraction analysis. In addition to the structural characterization, the pincer complex 19 and trigonal prismatic cages 21−22 were used as fluorescence sensors for nitroaromatic explosives owing to their large internal porosity and their π-electron rich nature. Scheme 3: Schematic representation of the formation of [3 + 2] self-assembled trigonal prismatic cage. CHAPTER 5 covers the syntheses of a few discrete metallamacrocycles using flexible imidazole/carboxylate based donors instead of much widely employed polypyridyl donors. The metal-ligand directed self-assembly of oxalato-bridged acceptor M8 and an imidazole-based tetratopic donor (L11; 1,2,4,5-tetrakis(imidazol-1-yl)benzene) in methanol afforded [2 + 1] self-assembled tetranuclear macrocycle 23. Conversely, the similar combination of L11 with 2,5-dihydroxy-1,4-benzoquinonato-bridged binuclear complex (M9) in 1:2 molar ratio in methanol resulted in an octanuclear cage 24. Both the complexes (23−24) were isolated as their triflate salts in high yields and were characterized by various spectroscopic methods including single crystal X-ray diffraction analysis. Scheme 4: Schematic representation of formation of an octanuclear incomplete Ru(II) open prism via ruthenium-oxygen coordination driven self-assembly. This chapter also explains the self-sorting of an unusual octanuclear incomplete prism [Ru8(η6-p-cymene)8(tma)2(μ-η4-C2O4)2(OMe)4](CF3SO3)2 (25) via ruthenium-oxygen coordination driven self-assembly of building block M8 and sodium benzene-1,3,5-tricarboxylate (L12) (Scheme 4). Electronic absorption study indicated that prism 25 exhibited a remarkable shape-selective binding affinity for 1,3,5-trihydroxybenzene (phluoroglucinol) via multiple hydrogen bonding interactions and such shape-selective binding was confirmed by single crystal X-ray diffraction analysis. (For figures pl see the abstract file)

The purpose of this doctoral thesis is to investigate and develop catalytic processes mediated by iridium(III) complexes. By understanding the mechanisms, the weaknesses of the designed catalysts can be identified and be overcome in the following generation. The thesis is composed of two general sections dedicated to the synthesis and applications of homogeneous catalysts and to the preparation of heterogeneous catalysts based on metal-organic frameworks (MOFs). After a general introduction (Chapter 1), the first part of the thesis (Chapters 2-4, and Appendix 1) covers the use of several homogeneous bifunctional [Cp*Ir(III)] catalysts in a variety of chemical transformations, as well as mechanistic studies. Chapter 2 summarizes the studies on the N-alkylation of anilines with benzyl alcohols catalyzed by bifunctional Ir(III) complexes. Mechanistic investigations when the reactions were catalyzed by Ir(III) complexes with a hydroxy-functionalized N-heterocyclic carbene (NHC) ligand are discussed, followed by the design of a new generation of catalysts. The chapter finishes presenting the improved catalytic performance of these new complexes.    A family of these NHC-iridium complexes was evaluated in the acceptorless dehydrogenation of alcohols, as shown in Chapter 3. The beneficial effect of a co-solvent was investigated too. Under these base-free conditions, a wide scope of alcohols was efficiently dehydrogenated in excellent yields. The unexpected higher activity of the hydroxy-containing bifunctional NHC-Ir(III) catalysts, in comparison to that of the amino-functionalized one, was investigated experimentally. In the fourth chapter, the catalytic process presented in Chapter 3 was further explored on 1,4- and 1,5-diols, which were transformed into their corresponding tetrahydrofurans and dihydropyrans, respectively. Mechanistic investigations are also discussed. In the second part of the thesis (Chapter 5), a Cp*Ir(III) complex was immobilized into a MOF. The heterogenization of the metal complex was achieved efficiently, reaching high ratios of functionalization. However, a change in the topology of the MOF was observed. In this chapter, the use of advanced characterization techniques such as X-ray absorption spectroscopy (XAS) and pair distribution function (PDF) analyses enabled to study a phase transformation in these materials. / <p>At the time of the doctoral defense, the following paper was unpublished and had a status as follows: Paper 3: Submitted.</p>