1 |
Att ta plats är att ge plats : Hur kvinnor som moshar förstår och förhandlar kropp, kön och rum ur ett feministiskt fenomenologiskt perspektivDenward, Hilda January 2018 (has links)
The aim of this paper is to examine how women who mosh to hardcore music understand moshing as a meaning making activity and how they understand and negotiate body, gender and space in their relation to moshing. I have done a feminist phenomenological analysis on four deep interviews with women who mosh based on the theories of Sara Ahmed and Iris Young. I have found that my informants discuss moshing in terms of feelings of adrenaline, euphoria, strength and emotional ventilation. They break the norms of female bodily performance at the same time as they feel uncomfortable with how their bodies stand out in relation to the white and male bodies as a norm in hardcore spaces. The women then use how their own and other bodies that stand out as a way to access space and as a ground for resistance, both against the room as masculine and as white. The women show a clear feministic orientation and use a violent bodily performance as a feminist practice.
|
2 |
The role of leaders in the effective implementation of transformational initiatives in South African gold minesMaphalala, Jabulani 23 February 2013 (has links)
Acting on behalf of the its executive council, the Chamber of Mines of South Africa conducted research into the impediments to improvements to health and safety in the mining industry. The study concluded that there was a need for a transformational change of the mining culture to embed health and safety as part and parcel of production. The study further concluded that the involvement of senior executives and underground mineworkers was critical to the success of the initiative. This was to ensure that the initiative does not end with the people who were running it in the mines.This study led to the implementation of the MOSH Leading Practice Adoption System which was intended to ensure that the culture of health and safety was embedded in the culture of the mining industry to an extend where mineworkers were perceived, and saw themselves, as part of the decision process specifically on health and safety.The leaders of the mining industry were critical in creating an environment that would ensure that impediments to the transformational initiative were removed as well as creating incentives for the change initiative.This research was conducted in 2012 with the objectives of establishing the role played by leaders in the effective implementation of transformational initiatives with a specific focus on the MOSH Leading Practice Adoption System. To establish this qualitiative research was conducted with a group of underground mineworkers and mine officials who wer part of the transformational initiative.The findings of this research, supported the findings of a survey conducted early in the year that the transformational initiative did not achieve the intended results of transforming the behaviours and attitudes of underground mineworkers.Literature is sparse on transformational initiatives that are industry-wide as the MOSH Leading Practice Adoption System was. Based on Organisational Development and Transformation principles, recommendations are made on how an industry-wide initiative could be successfully implemented. / Dissertation (MBA)--University of Pretoria, 2012. / Gordon Institute of Business Science (GIBS) / unrestricted
|
3 |
Bodily Awareness: The Theatre Writings of Michael Chekhov and Tadashi SuzukiRust, Colin Michael 01 August 2007 (has links)
No description available.
|
4 |
Hydrocarbons as food contaminants: / Kohlenwasserstoffe als Lebensmittelkontaminanten: Studien zur Migration von Mineralöl-Kohlenwasserstoffen und synthetischen Kohlenwasserstoffen aus LebensmittelkontaktmaterialienLommatzsch, Martin 06 March 2018 (has links) (PDF)
The contamination of foods with hydrocarbon mixtures migrating from food contact materials (FCM) was first observed for jute and sisal bags treated with batching oil in the 1990s. Since the millennium, the focus has shifted to printing inks and recycled cardboard packaging as most recognized sources for hydrocarbon contamination from FCM. Mineral oil containing printing inks can either release hydrocarbons directly from the printing of folding boxes into food or indirectly entering the recycling chain of cardboard material by printed products, such as newspapers.
The contamination of dry foods with mineral oil hydrocarbons (MOH) from recycled fiber packaging has been reported to reach up to 100 mg/kg [1]. Using LC-GC-FID technique the MOH were categorized into mineral oil saturated hydrocarbons (MOSH) and mineral oil aromatic hydrocarbons (MOAH). The molecular mass, which is assumed to be toxicological relevant, is derived from the GC retention times of accumulated MOSH in human tissues and is limited to n C16 to n-C35 [2]. MOSH is the most significant contaminant of the human body reaching 1-10 g per person, which is of particular concern since a formation of microgranulomas (causing inflammatory reactions) in the liver was observed in rats fed with saturated hydrocarbons [3]. Furthermore, some MOAH are assumed to be genotoxic analogous to polycyclic aromatic hydrocarbons [3]. In the latest draft of a German ‘Mineral Oil Regulation’ the following limits for the migration of MOH from recycled fiber are proposed: for MOSH C16-20 4.0 mg/kg, MOSH C21-35 2.0 mg/kg and for MOAH 0.5 mg per kg food [4].
Functional barriers reducing the migration of undesirable compounds from recycled cardboards (such as MOH and other contaminants) could be a part of the solution for this issue. Supporting that approach in this study, the boxes of recycled cardboard featuring a barrier layer on the internal surface or an integrated adsorbent available early in 2014 were investigated for their efficiency in reducing migration of mineral oil hydrocarbons into dry food. A practice-oriented one-year storage test was performed with wheat flakes in seven configurations: a box of virgin fibers, two boxes of unprotected recycled cardboard, three cardboards with barrier layers (a flexo-printed polyacrylate layer, a polyvinyl alcohol coating and a multilayer involving polyester) and a cardboard containing activated carbon. The highest migration of MOH (C16-24) was observed in the boxes of unprotected recycled cardboard (MOSH: 11.4 mg/kg, MOAH: 2.4 mg/kg). Of the three investigated barrier layers only two reduced migration of MOH into food below the limits of the 3rd draft of the German mineral oil ordinance (2014) until the end of shelf life. The cardboard box involving active carbon as adsorbent prevented detectable migration of mineral oil hydrocarbons (<0.1 mg/kg). In the case of virgin fiber, which was virtually free of MOH (<1 mg/kg), migration close to the proposed limits was detected (C16-24, MOSH: 1.5 mg/kg, MOAH: 0.4 mg/kg). Therefore, it has been proven that the transport box (corrugated board) substantially contributed to the transfer of MOH into food.
Plastic FCM can also release hydrocarbons, such as polyolefin oligomeric hydrocarbons (POH), into food. These POH are of synthetic nature and are formed during the polymerization process of polyolefins (150 – 3000 mg/kg in granulates of homo/hetero polymers involving ethylene and propylene). This group of synthetic contaminants contain also saturated hydrocarbons (POSH) analogous to mineral oils, but contrary no aromatic hydrocarbons. Further, a significant amount (10 – 50%) of monounsaturated hydrocarbons (POMH) was determined in the oligomeric fraction of polyolefins, which are not detectable in mineral oil products. Therefore, these POMH can be used as a marker for POH migration. A method based on two-dimensional high performance liquid chromatography on-line coupled to gas chromatography (on-line HPLC-HPLC-GC) was developed to enable the separate analysis of saturated, monounsaturated and aromatic hydrocarbons in extracts of packaging materials like polyolefins or paperboard and foods, repectively. It is an extension of the HPLC-GC method for MOSH and MOAH [1] using an additional argentation HPLC column, since normal-phase HPLC on silica gel did not preseparate saturated from monounsaturated hydrocarbons. Further, this method and comprehensive two-dimensional GC (GCxGC) was used to investigate the concentration of different oligomer types in polypropylene (PP) and polyethylene (PE) based sealing layers as well as their corresponding granulates. The analyzed sealing layers contained 180-995 mg/kg POSH and 90-435 mg/kg POMH (C16-35). Only in sealing layers involving low-density PE, oxidized polyolefin oligomers as well as cyclic oligomers (alkylated cyclopentanes and hexanes) have been detected. The transfer of POH (C16-35) from the investigated sealing layers into food can be substantial (>50%) and can reach more than 2 mg per kg food. The level of contamination depends on the oligomer content of the sealing layer, the fat content of the food, the processing temperature and the surface-volume ratio.
Hot melt adhesives are widely utilized to glue cardboard boxes used as food packaging material. The analysed raw materials of hot melts mainly consisted of paraffinic waxes, hydrocarbon resins and polyolefins. The hydrocarbon resins, functioning as tackifiers, were the predominant source of hydrocarbons of sufficient volatility to migrate via gaseous phase into dry foods. The 18 hydrocarbon resins analyzed contained 8.2-118 g/kg saturated and up to 59 g/kg aromatic hydrocarbons (C16-24). These synthetic tackfier resins, especially the oligomers ≤C24, have been characterized structurally and migration into food was estimated using a food simulant and by the analysis of real food samples. About 0.5-1.5 % of the potentially migrating substances (C16 24) of a hot melt were found to be transferred into food under storage conditions, which can result in a food contamination of approximately 1 mg/kg food in this case. The order of magnitude depends on the absolute amount of potentially migrating substances from the hot melt, the hot melt surface, contact time, amount and type of foods.
|
5 |
Hydrocarbons as food contaminants:: Studies on the migration of mineral oil and synthetic hydrocarbons from food contact materialsLommatzsch, Martin 19 October 2017 (has links)
The contamination of foods with hydrocarbon mixtures migrating from food contact materials (FCM) was first observed for jute and sisal bags treated with batching oil in the 1990s. Since the millennium, the focus has shifted to printing inks and recycled cardboard packaging as most recognized sources for hydrocarbon contamination from FCM. Mineral oil containing printing inks can either release hydrocarbons directly from the printing of folding boxes into food or indirectly entering the recycling chain of cardboard material by printed products, such as newspapers.
The contamination of dry foods with mineral oil hydrocarbons (MOH) from recycled fiber packaging has been reported to reach up to 100 mg/kg [1]. Using LC-GC-FID technique the MOH were categorized into mineral oil saturated hydrocarbons (MOSH) and mineral oil aromatic hydrocarbons (MOAH). The molecular mass, which is assumed to be toxicological relevant, is derived from the GC retention times of accumulated MOSH in human tissues and is limited to n C16 to n-C35 [2]. MOSH is the most significant contaminant of the human body reaching 1-10 g per person, which is of particular concern since a formation of microgranulomas (causing inflammatory reactions) in the liver was observed in rats fed with saturated hydrocarbons [3]. Furthermore, some MOAH are assumed to be genotoxic analogous to polycyclic aromatic hydrocarbons [3]. In the latest draft of a German ‘Mineral Oil Regulation’ the following limits for the migration of MOH from recycled fiber are proposed: for MOSH C16-20 4.0 mg/kg, MOSH C21-35 2.0 mg/kg and for MOAH 0.5 mg per kg food [4].
Functional barriers reducing the migration of undesirable compounds from recycled cardboards (such as MOH and other contaminants) could be a part of the solution for this issue. Supporting that approach in this study, the boxes of recycled cardboard featuring a barrier layer on the internal surface or an integrated adsorbent available early in 2014 were investigated for their efficiency in reducing migration of mineral oil hydrocarbons into dry food. A practice-oriented one-year storage test was performed with wheat flakes in seven configurations: a box of virgin fibers, two boxes of unprotected recycled cardboard, three cardboards with barrier layers (a flexo-printed polyacrylate layer, a polyvinyl alcohol coating and a multilayer involving polyester) and a cardboard containing activated carbon. The highest migration of MOH (C16-24) was observed in the boxes of unprotected recycled cardboard (MOSH: 11.4 mg/kg, MOAH: 2.4 mg/kg). Of the three investigated barrier layers only two reduced migration of MOH into food below the limits of the 3rd draft of the German mineral oil ordinance (2014) until the end of shelf life. The cardboard box involving active carbon as adsorbent prevented detectable migration of mineral oil hydrocarbons (<0.1 mg/kg). In the case of virgin fiber, which was virtually free of MOH (<1 mg/kg), migration close to the proposed limits was detected (C16-24, MOSH: 1.5 mg/kg, MOAH: 0.4 mg/kg). Therefore, it has been proven that the transport box (corrugated board) substantially contributed to the transfer of MOH into food.
Plastic FCM can also release hydrocarbons, such as polyolefin oligomeric hydrocarbons (POH), into food. These POH are of synthetic nature and are formed during the polymerization process of polyolefins (150 – 3000 mg/kg in granulates of homo/hetero polymers involving ethylene and propylene). This group of synthetic contaminants contain also saturated hydrocarbons (POSH) analogous to mineral oils, but contrary no aromatic hydrocarbons. Further, a significant amount (10 – 50%) of monounsaturated hydrocarbons (POMH) was determined in the oligomeric fraction of polyolefins, which are not detectable in mineral oil products. Therefore, these POMH can be used as a marker for POH migration. A method based on two-dimensional high performance liquid chromatography on-line coupled to gas chromatography (on-line HPLC-HPLC-GC) was developed to enable the separate analysis of saturated, monounsaturated and aromatic hydrocarbons in extracts of packaging materials like polyolefins or paperboard and foods, repectively. It is an extension of the HPLC-GC method for MOSH and MOAH [1] using an additional argentation HPLC column, since normal-phase HPLC on silica gel did not preseparate saturated from monounsaturated hydrocarbons. Further, this method and comprehensive two-dimensional GC (GCxGC) was used to investigate the concentration of different oligomer types in polypropylene (PP) and polyethylene (PE) based sealing layers as well as their corresponding granulates. The analyzed sealing layers contained 180-995 mg/kg POSH and 90-435 mg/kg POMH (C16-35). Only in sealing layers involving low-density PE, oxidized polyolefin oligomers as well as cyclic oligomers (alkylated cyclopentanes and hexanes) have been detected. The transfer of POH (C16-35) from the investigated sealing layers into food can be substantial (>50%) and can reach more than 2 mg per kg food. The level of contamination depends on the oligomer content of the sealing layer, the fat content of the food, the processing temperature and the surface-volume ratio.
Hot melt adhesives are widely utilized to glue cardboard boxes used as food packaging material. The analysed raw materials of hot melts mainly consisted of paraffinic waxes, hydrocarbon resins and polyolefins. The hydrocarbon resins, functioning as tackifiers, were the predominant source of hydrocarbons of sufficient volatility to migrate via gaseous phase into dry foods. The 18 hydrocarbon resins analyzed contained 8.2-118 g/kg saturated and up to 59 g/kg aromatic hydrocarbons (C16-24). These synthetic tackfier resins, especially the oligomers ≤C24, have been characterized structurally and migration into food was estimated using a food simulant and by the analysis of real food samples. About 0.5-1.5 % of the potentially migrating substances (C16 24) of a hot melt were found to be transferred into food under storage conditions, which can result in a food contamination of approximately 1 mg/kg food in this case. The order of magnitude depends on the absolute amount of potentially migrating substances from the hot melt, the hot melt surface, contact time, amount and type of foods.
|
Page generated in 0.0209 seconds